When EXT_shader_framebuffer_fetch is used and only depth and/or
stencil are written, we can't rely on the first output being to
depth/stencil.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5755>
The pass is useful for EXT_shader_framebuffer_fetch, not just blend
shaders, so we should do it with the other lowering passes in
midgard_compile_shader_nir.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5755>
Out-of-order rasterization is disabled if a pipeline uses an
extended dynamic depth/stencil state because the driver doesn't
support enabling/disabling out-of-order dynamically.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5718>
The number of viewports/scissors is currently static because it can
only be specified at pipeline creation, but it doesn't hurt to
assume it's dynamic. Will help for supporting setting the number
of viewports/scissors dynamically.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5718>
Steam was the only client of this feature and it seems no longer used.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5869>
../src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp:69:8: warning: type ‘struct opProperties’ violates the C++ One Definition Rule [-Wodr]
69 | struct opProperties
| ^
../src/gallium/drivers/nouveau/codegen/nv50_ir_target_nvc0.cpp:88:8: note: a different type is defined in another translation unit
88 | struct opProperties
| ^
../src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp:77:17: note: the first difference of corresponding definitions is field ‘fShared’
77 | unsigned int fShared : 3;
| ^
../src/gallium/drivers/nouveau/codegen/nv50_ir_target_nvc0.cpp:96:17: note: a field with different name is defined in another translation unit
96 | unsigned int fImmd : 4; // last bit indicates if full immediate is suppoted
nvc0 code also has the same thing.
v2: rename both paths (Karol)
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5873>
We don't use linked texture/samplers. Fixes a bunch of CTS issues which
also seem to fail a bit randomly depending on what tests ran before and
such, so the list is incomplete.
Fixes:
KHR-GL46.texture_gather.*
KHR-GL46.compute_shader.resource-texture
KHR-GL46.multi_bind.dispatch_bind_samplers
KHR-GL46.multi_bind.dispatch_bind_textures
KHR-GL46.shading_language_420pack.binding_sampler_array
KHR-GL46.shading_language_420pack.binding_sampler_single
KHR-GL46.shading_language_420pack.binding_samplers
KHR-GL46.stencil_texturing.functional
KHR-GL46.texture_gather.incomplete-texture-last-comp
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5874>
When ctx_wait_idle failed, something really bad happened likely
a GPU hang. Make sure to return the appropriate Vulkan error code
in this case.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5843>
Whenever a struct type is decorated Block or BufferBlock we turn that
into a GLSL_TYPE_INTERFACE. Since these decorations can end up random
places, we should allow them for constants.
Closes: #3252
Fixes: 9d0ae777dd "spirv: Use interface type for block and buffer..."
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5855>
This is required when the shader uses local memory for arrays or spills.
I really dislike how it's done right now, but oh well, it's the same for
other gens.
Fixes CTS tests:
KHR-GL46.shading_language_420pack.binding_image_array
KHR-GL46.shading_language_420pack.length_of_compute_result
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5840>
The pitchalign value was being left to 0 and then wrapping around when
the base offset was subtracted in texture state.
Fixes: 979e7e3680 ("freedreno/layout: layout simplifications and pitch from level 0 pitch")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5864>
the final output of gl_Position needs this transform, and geometry shaders
must write this value for stream 0 if rasterization is enabled
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5851>
From the Kaby Lake PRM Vol. 7 "Assigning Conditional Flags":
* Note that the [post condition signal] bits generated at
the output of a compute are before the .sat.
Paragraph about post_zero does not mention saturation, but
testing it on actual GPUs shows that conditional modifiers
are applied after saturation.
* post_zero bit: This bit reflects whether the final
result is zero after all the clamping, normalizing,
or format conversion logic.
For signed types we don't care about saturation: it won't
change the result of conditional modifier.
For floating and unsigned types there two special cases,
when we can remove inst even if scan_inst is saturated: G
and LE. Since conditional modifiers are just comparations
against zero, saturating positive values to the upper
limit never changes the result of comparation.
For negative values:
(sat(x) > 0) == (x > 0) --- false
(sat(x) <= 0) == (x <= 0) --- true
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2610
Signed-off-by: Yevhenii Kolesnikov <yevhenii.kolesnikov@globallogic.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4167>
Even though the boolean can be divergent, the control flow can be (at
least partially) uniform. For example, we don't have to create any
s_andn2_b64/s_and_b64/s_or_b64 instructions with this code:
a = ...
loop {
b = bool_phi a, c
if (uniform)
break
c = ...
}
d = phi c
fossil-db (Navi):
Totals from 5506 (4.05% of 135946) affected shaders:
SGPRs: 605720 -> 604024 (-0.28%)
SpillSGPRs: 52025 -> 51733 (-0.56%)
CodeSize: 65221188 -> 64957808 (-0.40%); split: -0.41%, +0.00%
Instrs: 12637881 -> 12584610 (-0.42%); split: -0.42%, +0.00%
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3388>
The compute shader dirtying is a bit wrong here, since we don't
have a second stage like for fragment shaders, so dirty the compute
shader whenever a sampler or image changes, (ssbo/contexts don't
needs this).
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5835>
The fragment shader needs to be regenerated here,
so flag the same as for sampler views.
This causes correct flushing:
KHR-GL46.shader_image_load_store.non-layered_binding
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5835>
It's been pointed out to me that determining whether a commit is present
in a stable branch is non-trivial (cherry-picks are a pain to search for)
and the commands are hard to remember, making it too much to ask.
This script aims to solve that problem; at its simplest form, it only
takes a commit and a branch and tells the user whether that commit
predates the branch, was cherry-picked to it, or is not present in any
form in the branch.
$ bin/commit_in_branch.py e58a10af64 fdo/20.1
Commit e58a10af64 is in branch 20.1
$ echo $?
0
$ bin/commit_in_branch.py dd2bd68fa6 fdo/20.1
Commit dd2bd68fa6 was backported to branch 20.1 as commit d043d24654
$ echo $?
0
$ bin/commit_in_branch.py master fdo/20.1
Commit 2fbcfe170bf50fcbcd2fc70a564a4d69096d968c is NOT in branch 20.1
$ echo $?
1
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5306>
