In order to do cross-stage linking, we'll need to split out SPIR-V->NIR
and NIR finalization, so that we can do a round of linking in between.
The multiview lowering pass also assumes that it sits between two
optimization loops, which in anv are the pre-linking optimizations and
post-linking finalization.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6515>
Previously there were 20 padding bits after them, which would be left
uninitialized and preserved when writing to the swizzle members. This
could result in two equal viewport states spuriously being considered
different (because memcmp compared the padding bits as well).
Noticed while looking for something else with valgrind:
==801624== Conditional jump or move depends on uninitialised value(s)
==801624== at 0x10B86259: cso_set_viewport (cso_context.c:739)
==801624== by 0x10B862C7: cso_set_viewport_dims (cso_context.c:764)
==801624== by 0x1057E3A1: clear_with_quad (st_cb_clear.c:335)
==801624== by 0x1057E3A1: st_Clear (st_cb_clear.c:545)
==801624== [...]
==801624==
==801624== Conditional jump or move depends on uninitialised value(s)
==801624== at 0x10B885DE: cso_restore_viewport (cso_context.c:777)
==801624== by 0x10B885DE: cso_restore_state (cso_context.c:1710)
==801624== by 0x1057E4CB: clear_with_quad (st_cb_clear.c:364)
==801624== by 0x1057E4CB: st_Clear (st_cb_clear.c:545)
==801624== [...]
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6867>
This enables lowering of FS outputs for RADV/LLVM.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6865>
The store_output of RADV/LLVM expects the const offset to be 0.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6865>
Add missing descriptor sets code for push descriptors, and a simple initial
implementation to enable the extension and pass dEQP tests.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6755>
This isn't strictly necessary for freedreno, since we aren't using it
yet, but I wanted to avoid any problems if we do. If we wanted to handle
this "properly", and handle matrix and array per-view variables, we'd
probably want to encode the "view stride" (number of views per user
location) and base view in the intrinsic, but for now we just don't do
any offsetting and assume the indirect offset is the view.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6514>
I noticed this once I started gathering xfb_info after
nir_lower_io_arrays_to_elements_no_indirect.
Fixes: b2bbd978d0 ("nir: fix lowering arrays to elements for XFB outputs")
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6514>
This function wasn't counting driver slots correctly, resulting in
incorrect driver_location's and input_count. It seems intel doesn't use
this yet.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6514>
Taken mostly directly from the anv pass. A few anv-specific things that
I could leave in anv aren't included. Specifically on turnip we don't
need to set gl_Layer to 0, and we can handle the case where the FS reads
gl_ViewIndex, so that check is moved into anv.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6514>
Set up texture coordinates for the stencil-fallback blit code. This
worked in the orignal NIR code, but accidentally broke when rewriting to
use TGSI, and my test-case had a constant colored stencil buffer.
Fixes: e8a40715a8 ("gallium/util: add blitter-support for stencil-fallback")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6898>
This should have been the destination surface size, not the dimensions
of the source box. These were the same in the test-case I used while
developing this, but this matters for the GTF framebuffer-blit
functional CTS tests.
Fixes: e8a40715a8 ("gallium/util: add blitter-support for stencil-fallback")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6898>
There's no good reason not to use a symmetric rounding mode here. This
fixes the following GL CTS case for me:
GTF-GL33.gtf21.GL3Tests.texture_lod_bias.texture_lod_bias_all
Fixes: 132b69c4ed ("st/mesa: round lod_bias to a multiple of 1/256")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6892>
The separate readthedocs documentation is quite pointless these days, as
it's been moved to docs.mesa3d.org, where all other documentation
already is. There's nothing special about this documentation any longer.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6893>
Add an entry for the mediatek modesetting driver.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6885>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6885>
The G72, which is a bifrost v6, supports fast operations. The selection
should probably be done on a per-GPU basis instead of forcing this quirk
for all v6 GPUs.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6885>
Save bit_offset between iterations fixes for piglit:
* LIBGL_ALWAYS_SOFTWARE=true GALLIUM_DRIVER=softpipe piglit/bin/bptc-float-modes
* LIBGL_ALWAYS_SOFTWARE=true GALLIUM_DRIVER=llvmpipe piglit/bin/bptc-float-modes
Memset to zero in reserved mode for rgba_unorm fixes for VK-GL-CTS with libvulkan_val:
* dEQP-VK.texture.compressed.bc7_unorm_block_2d_pot
* dEQP-VK.texture.compressed.bc7_srgb_block_2d_pot
* dEQP-VK.texture.compressed.bc7_unorm_block_2d_npot
* dEQP-VK.texture.compressed.bc7_srgb_block_2d_npot
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6809>
It's not always v4f32 (or v4f16 for 16-bit) when image stores are
shrinked using the format.
This fixes a ton of crashes with RADV_DEBUG=checkir,llvm.
Fixes: e4d75c22be ("nir/opt_shrink_vectors: shrink image stores using the format")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6882>
Fix defect reported by Coverity Scan.
Resource leak (RESOURCE_LEAK)
leaked_storage: Variable l going out of scope leaks the storage it
points to.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6858>
