By this allows us to fetch the device list/info w/o the revision field.
At the moment retrieving the latter wakes up the device.
Note: kernel patch to resolve that should be in 4.10.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Currently when running mesa on imx6 the following loader warnings
are seen:
# kmscube -D /dev/dri/card1
MESA-LOADER: device is not located on the PCI bus
MESA-LOADER: device is not located on the PCI bus
MESA-LOADER: device is not located on the PCI bus
Using display 0x1920948 with EGL version 1.4
As this is not an error message, change it to debug level in
order to have a cleaner log output.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This is a DRI3 version of a change made for DRI2
(4d6d4f939e, "egl/dri2: implement query surface hook"),
that fixed failures in dEQP-EGL.functional.resize.surface_size.grow
and dEQP-EGL.functional.resize.surface_size.shrink.
Cc: Tapani Pälli <tapani.palli@intel.com>
Cc: Mark Janes <mark.a.janes@intel.com>
Cc: Chad Versace <chadversary@chromium.org>
Signed-off-by: Brendan King <Brendan.King@imgtec.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Otherwise we would fail with "implicit declaration of function" geteuid
and getenv respectively.
To trigger (re)move the libdrm.pc file and use the following:
$ ./autogen.sh --disable-egl --disable-gbm --disable-dri \
--with-dri-drivers=swrast --with-gallium-drivers=swrast
$ make
Cc: Vinson Lee <vlee@freedesktop.org>
Fixes: 3f462050c ("loader: Add an environment variable to override driver name choice.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99701
v2: [Emil: handle stdlib.h add commit message]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
My vc4 simulator has been implemented so far by having an entrypoint
claiming to be i965, which was a bit gross. The simulator would be a lot
less special if we entered through the vc4 entrypoint like normal, so add
a loader environment variable to allow the i965 fd to probe as vc4.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This makes it possible to 'use' the imx-drm driver. Remeber that it
is not possible to have sysmbol names in C/C++ with a '-' in it.
Changes since v1:
- move the fix to loader.c
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (v1)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Changes since v1:
- renamed function to loader_get_extensions_name
- moved function into loader
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
V2: [Emil Velikov]
- Use local define.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
With previous patches nearly all the original code (as seen in the
various loaders) is gone.
Update the copyright/license section to reflect that.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reminiscent from the pre-loader days, were we had multiple instances of
the loader logic in separate places and one could build a "GALLIUM_ONLY"
version.
Since that is no longer the case and the loaders (glx/egl/gbm) do not
(and should not) require to know any classic/gallium specific we can
drop the argument and the related code.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Effectively everyone with actual hardware and/or requesting the
"device_name" requires a working libdrm. Thus they could/should already
be using the (now only) codepath.
Apart from the code simplification, we can slim down our configure.ac
even further. But that will be done in separate patch(es).
Cc: Gary Wong <gtw@gnu.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
As of last commit nothing in mesa depends on libudev.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
With this all the libudev related code is now gone.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Currently not everyone has libudev and with follow-up patches we'll
completely remove the divergent codepaths.
Use the libdrm drm device API to construct the required ID_PATH_TAG-like
string, to preserve the current functionality for libudev users and
allow others to benefit from it as well.
v2: Drop ranty comments, pick the correct device
v3: \n -> \0 in PCI_ID_PATH_TAG_LENGTH comment (Axel).
v4: Use snprintf (Nicolai)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Improves readability and allows us to do further cleanups a lot easier.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Currently mesa has three code paths in the loader - libudev, manual
sysfs and drm ioctl one.
Considering the issues we had with libudev - strip those down in favour
of the libdrm drm device API. The latter can be implemented in any way
depending on the platform and can be reused by others.
v2: Use correct message on drmGetDevice failure. (Nicolai)
Cc: Jonathan Gray <jsg@jsg.id.au>
Cc: Jean-Sébastien Pédron <dumbbell@FreeBSD.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
This tries to mirrors the codepath taken by DRI2 in IntelSetTexBuffer2()
and fixes many applications when using DRI3:
- Totem with libva on hw-accelerated decoding
- obs-studio, using Window Capture (Xcomposite) as a Source
- gstreamer with VAAPI
v2:
- introduce get_dri_screen() in the dri3 loader's vtable (krh)
Tested-by: Timo Aaltonen <tjaalton@ubuntu.com>
Tested-by: Ionut Biru <biru.ionut@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71759
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
This allows querying the current active screen from the
loader's common code.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
This can make a significant difference for performance with some extreme
test cases such as vblank_mode=0 glxgears.
Fixes: 1e3218bc5b ("loader/dri3: Overhaul dri3_update_num_back")
Cc: "12.0 11.2" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97549
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
When trying to get a device name for an fd using sysfs, it would always fail
as it was expecting key/value pairs to be delimited by '\0', which is not the
case.
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
NV34 and possibly other NV3x hardware has the capability of exposing the
NV25 graph class. This allows forcing nouveau_vieux to be used instead
of the gallium driver, primarily for testing purposes. (Among other
things, NV2x only ever came as AGP or inside an Xbox, never PCI/PCIe).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Always use 3 buffers when flipping. With only 2 buffers, we have to wait
for a flip to complete (which takes non-0 time even with asynchronous
flips) before we can start working on the next frame. We were previously
only using 2 buffers for flipping if the X server supports asynchronous
flips, even when we're not using asynchronous flips. This could result
in bad performance (the referenced bug report is an extreme case, where
the inter-frame stalls were preventing the GPU from reaching its maximum
clocks).
I couldn't measure any performance boost using 4 buffers with flipping.
Performance actually seemed to go down slightly, but that might have
been just noise.
Without flipping, a single back buffer is enough for swap interval 0,
but we need to use 2 back buffers when the swap interval is non-0,
otherwise we have to wait for the swap interval to pass before we can
start working on the next frame. This condition was previously reversed.
Cc: "12.0 11.2" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97260
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Without this, the X server may accumulate stale Present event contexts
if a client ends up creating and destroying DRI drawables for the same
window.
v2: Based on Chris Wilson's review:
* Use xcb_present_select_input_checked so that protocol errors
generated by old X servers can be handled gracefully
* Use xcb_discard_reply() instead of free(xcb_request_check())
Fix warnings like these due to HAVE_LIBDRM being inconsistently defined:
external/libdrm/include/drm/drm.h:839:30: warning: redefinition of typedef 'drm_clip_rect_t' is a C11 feature [-Wtypedef-redefinition]
typedef struct drm_clip_rect drm_clip_rect_t;
HAVE_LIBDRM needs to be set project wide to fix this. This change also
harmlessly links libdrm with everything, but simplifies the makefiles a
bit.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Use dev_node_from_fd() with HAVE_LIBDRM to provide an implmentation
of loader_get_device_name_for_fd() for non-linux systems that
use libdrm but don't have udev or sysfs.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
It seems that due to the conditional autotools is getting confused and
forgetting to add AM_CPPFLAGS when building libloader (when
HAVE_DRICOMMON is not set).
Cc: mesa-stable@lists.freedesktop.org
Fixes: 5a79e0a8e3 "automake: loader: rework the CPPFLAGS"
Reported-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Seems that creating an empty one does not fair too well with MacOSX's
ar. Considering that all the users of the helper include it only when
needed, let's reshuffle the makefile.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92985
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Vinson Lee <vlee@freedesktop.org>
Tested-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Without this the compilation will fail, as the headers are installed in
a non-default location.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Rather than duplicating things, just use the generic AM_CPPFLAGS. This
has the fortunate side-effect of adding VISIBILITY_CFLAGS for the dri3
helper. The latter of which was erroneously exposing some internal
symbols.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reported-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Tested-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Used to support EGL_KHR_image_pixmap.
Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com>
Reviewed-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.co.uk>
v2: From Martin Peres
- Try to fit in the 80-col limit as much as possible
v3: From Martin Peres
- introduce loader_dri3_helper.la to avoid dragging the xcb dep everywhere (Kristian & Emil)
- get rid of the width, height, dri_screen and is_different_gpu vfuncs (Kristian)
- replace the create/destroy functions with init/fini for dri3 drawables
- prefix static functions with dri3_ and exported ones with loader_dri3 (Emil)
- keep the function definition consistent (Emil)
Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.co.uk>
Double negatives in English language are normally avoided, plus the
former seems cleaner and more consistent.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Since there was an ABI break and linking twice against libudev.so.0 and
libudev.so.1 causes the application to quickly crash, we first check if
the application is currently linked against libudev before dlopening a
local handle. However for backwards/forwards compatability, we need to
inspect the application for current linkage against all known versions
first. Not doing so causes a crash when both libraries are present and
so mesa chooses libudev.so.1 but the application was linked against
libudev.so.0.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Emil Velikov:
I'm ever so slightly conserned that RTLD_NOLOAD is not part of the POSIX
standard, thus it's missing on some platforms (*BSD seems ok, while
Solaris, MacOS are not).
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Fixes the following build issue, when building without libudev.
CCLD libGL.la
./.libs/libglx.a(dri2_glx.o): In function `dri2CreateScreen':
src/glx/dri2_glx.c:1186: undefined reference to `loader_open_device'
collect2: ld returned 1 exit status
CCLD libEGL.la
Undefined symbols for architecture x86_64:
"_loader_open_device", referenced from:
_dri2_initialize_x11_dri2 in libegl_dri2.a(platform_x11.o)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91077
Signed-off-by: Julien Isorce <j.isorce@samsung.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This is already our common idiom for opening files with CLOEXEC and
it's a little ugly, so let's share this one implementation.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
As we use the file from both the dri modules and loader, we end up with
multiple definition of the symbols provided in our gallium dri modules.
Additionally we compile the file twice.
Resolve both issues, effectively enabling the build on toolchains which
don't support -Wl,--allow-multiple-definition.
v2: [Emil Velikov]
- Fix the Scons/Android build.
- Resolve libgbm build issues (bring back the missing -lm)
Cc: Julien Isorce <j.isorce@samsung.com>
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90310
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90905
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
