We need 2.4.57 for fd_bo_dmabuf() / fd_bo_from_dmabuf().
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 40aabc0e80)
Emil Velikov: Required by commit 2a90f0fb.
Nominated-by: Rob Clark <robclark@freedesktop.org>
So when checking/building sse code we have three possibilities:
1 Old compiler, throws an error when using -msse*
2 New compiler, user disables sse* (-mno-sse*)
3 New compiler, user doesn't disable sse
The original code, added code for #1 but not #2. Later on we patched
around the lack of handling #2 by wrapping the code in __SSE4_1__.
Yet it lead to a missing/undefined symbol in case of #1 or #2, which
might cause an issue for #2 when using the i965 driver.
A bit later we "fixed" the undefined symbol by using #1, rather than
updating it to handle #2. With this commit we set things straight :)
To top it all up, conventions state that in case of conflicting
(-enable-foo -disable-foo) options, the latter one takes precedence.
Thus we need to make sure to prepend -msse4.1 to CFLAGS in our test.
v2: Clean the #includes. Suggested by Ilia, Matt & Siavash.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Siavash Eliasi <siavashserver@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 1a6ae84041)
This is the only guaranteed way get the patch level for llvm,
since the define cannot always be found in config.h depending
on the version of llvm or the build system used.
CC: 10.2 10.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jonathan Gray <jsg@jsg.id.au>
(cherry picked from commit ec566e0f16)
Mesa already defines _GNU_SOURCE for glibc based systems and defining
_GNU_SOURCE will break the Mesa build on other systems such as OpenBSD.
_GNU_SOURCE only seems to be included in llvm-config output when
LLVM is built via autoconf and not when it is built by cmake.
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
(cherry picked from commit c68073e65f)
With the gallium megadrivers we've converted most ST to optionally
use either statically linked in or shared pipe-drivers.
The hardcoded switch forgot to conditionally enable the build of the
shared pipe-drivers which resulted in them being constantly build.
Cc: "10.3" <mesa-stable@lists.freedesktop.org>
Cc: James Ausmus <james.ausmus@intel.com>
Reported-by: James Ausmus <james.ausmus@intel.com>
Tested-by: James Ausmus <james.ausmus@intel.com>
Bugzilla: https://code.google.com/p/chromium/issues/detail?id=412089
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 44ec468e80)
With recent commit we removed the NEED_NONNULL_WINSYS checks when
selecting the hardware (inc svga) winsys. svga has only one winsys
that explicitly requires libdrm (via it's bundled version of
vmwgfx_drm.h) but configure.ac never really checks for it.
Add the check early to prevent people from shooting themselves when
they select the driver but lack libdrm.
$ ./autogen.sh --disable-dri --disable-egl --disable-gallium-llvm
--with-dri-drivers=swrast --with-gallium-drivers=svga,swrast
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82539
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 40bb6f9313)
As older versions of gnu ld did not support --dynamic-list check to see
if it is supported before using it. Non gnu linkers such the apple one
likely lack this option as well.
Fixes the build on OpenBSD which has binutils 2.15 and 2.17.
The --dynamic-list option seems to been have introduced sometime after
binutils 2.17 was released as it is present in 2.18.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 635477dc4b)
These two were added ages ago, with an explicit comment "Hacks ..."
They have been insufficient for years and maintainers needed to
explicitly handle the build themselves.
Rather than lying and pretending that it works, just kill this hack and
let maintainers build things the way it should be done for their
distribution.
Document the removal in the release notes.
Suggested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This reverts commit 2af28040d6.
The commit was resolving an issue where libtool will not setup the
environment correctly when one explicitly provides --enable-{32,64}-bit
at configure time. It was caused due to the "-m32,64" C{,XX}FLAGS being
set too late relative to LT_INIT.
At the same time this cases the enable_static to be incorrectly set,
amongst others leading to build issues. Rather than being smart and
trying to handle 32/64 bit build ourselves it may be better to delegate
it to the builder/maintainer. The latter should now know better which is
the correct(most appropriate) method.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82536
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82546
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Brian Paul <brianp@vmware.com>
When the compiler is not capable/does not accept -msse4.1 while the target
has the instruction set we'll blow up as _mesa_streaming_load_memcpy is
going to be undefined.
To make sure that never happens, wrap the runtime cpu check+caller in an
ifdef thus do not compile that hunk of the code.
Fix the android build by enabling the optimisation and adding the define
where applicable.
v2: autoconf conditionals end with "fi" rather than endif.
v3: Wrap the definition and call to intel_miptree_{un,}map_movntdqa in
if defined(USE_SSE41). Spotted by Matt.
Cc: Matt Turner <mattst88@gmail.com>
Cc: Adrian Negreanu <adrian.m.negreanu@intel.com>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Yet another makefile less to worry about.
v2: Add state_trackers and targets on a single SUBDIRS line.
Requested by Matt.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
One makefile less, with the potential of further compacting the
automake build.
v2: Rebase on top of vc4 changes.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Rather than having two separate almost empty and identical makefiles,
compact them thus improving the configure and build time.
Additionally this makes the automake build symmetrical to the scons
and android one.
v2: Rebase on top of vc4, compact drivers + winsys on a single line.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
A while back we've mandated that gbm requires enable_dri,
thus this check is no longer required.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The former is the only user of the latter. As such building gbm
without egl makes little to no sense.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Moving LT_INIT after setting completely (AM_)C(XX)FLAGS and LDFLAGS.
LT_INIT needs them as they are expected to be used all along
the compilation when the macro runs its tests to determine among other
things the host type.
For info, see http://www.gnu.org/software/libtool/manual/html_node/LT_005fINIT.html
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50754
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Tested-by: Tapani Palli <lemody@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
ec8ebff "Check for dladdr()" erroneously uses LDFLAGS rather than LIBS to add
-ldl to the dladdr check.
Replace the workaround in 39a4cc4 of explicitly checking in libdl, with a more
correct approach of using LIBS.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
This mostly just takes every draw call and turns it into a sequence of
commands that clear the FBO and draw a single shaded triangle to it,
regardless of the actual input vertices or shaders. I copied the initial
driver skeleton mostly from freedreno, and I've preserved Rob Clark's
copyright for those. I also based my initial hardcoded shaders and
command lists on Scott Mansell (phire)'s "hackdriver" project, though the
bit patterns of the shaders emitted end up being different.
v2: Rebase on gallium megadrivers changes.
v3: Rebase on PIPE_SHADER_CAP_MAX_CONSTS change.
v4: Rely on simpenrose actually being installed when building for
simulation.
v5: Add more header duplicate-include guards.
v6: Apply Emil's review (protection against vc4 sim and ilo at the same
time, and dropping the dricommon drm bits) and fix a copyright header
(thanks, Roland)
Use both macros as in some cases using AC_CHECK_FUNCS alone may fail.
Thus HAVE_DLADDR will not be defined, and as a result most of the code
in megadriver_stub.c will not be compiled. Breaking the backwards
compatibility between older libGL/xserver(s) and DRI megadrivers.
Cc: Jon TURNEY <jon.turney@dronecode.org.uk>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
[Emil Velikov] Commit message.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The tests in an empty stub, which we're currently building twice.
If anyone is interested in expanding it (adding actual tests) they
can always bring it back.
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This hash table is used in core Mesa, the GLSL compiler, and the i965
driver, which makes it a good candidate for the new src/util module.
It's much faster than program/hash_table.[ch] (see commit 6991c2922f
for data), and José's u_hash_table.c has a comment saying Gallium should
probably consider switching to a linear probing hash table at some point.
So this seems like the best candidate for a shared data structure.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
v2 (Jason Ekstrand): Pick up another hash_table use and patch up scons
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
For a long time, we've wanted a place to put utility code which isn't
directly tied to Mesa or Gallium internals. This patch creates a new
src/util directory for exactly that purpose, and builds the contents as
libmesautil.la.
ralloc seemed like a good first candidate. These days, it's directly
used by mesa/main, i965, i915, and r300g, so keeping it in src/glsl
didn't make much sense.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
v2 (Jason Ekstrand): More realloc uses and some scons fixes
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We don't support this type of X acceleration and we never did.
Other drivers might want to do the same thing.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Add a new winsys and target that can be used with a dri2 state tracker
and loader instead of drisw. This allows to use gbm as a dri2/image
loader and avoid the extra copy from the backbuffer to the shadow
frontbuffer.
The new driver is called "kms_swrast", and is loaded by gbm as a
fallback, because it is only useful with the gbm platform (as no buffer
sharing is possible)
To force select the driver set the environment variable
GBM_ALWAYS_SOFTWARE
[Emil Velikov]
- Rebase on top of gallium megadriver.
- s/text/test/ in configure.ac (Spotted by Andreas Pokorny).
- Add scons support for winsys/sw/kms-dri and fix the build.
- Provide separate DriverAPI, due to different InitScreen hook.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Principle of least surprise: --enable-debug should enable debugging.
Ages ago, Mesa's build system only added -g in dri-debug builds (yay for
the static Makefiles). If you forgot to change it (or wrap the build
with custom scripts), you would often be disappointed when trying to gdb
Mesa bugs. New developers, that may not yet have custom scripts, will
have this same issue.
I think we should enable experienced developers to do what they want,
and make things easier for new developers. I already pass '-ggdb3 -O1'
or '-ggdb3 -Og' for CFLAGS, and I don't want configure to change them
for me.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
It seems like for the most part, different behaviors, workarounds, etc,
should be conditional on GPU patch revision (ie. a320.0 vs a320.2)
rather than GPU id (a320 vs a330).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Adjust definition of _XOPEN_SOURCE appropriately for use of strndup() added with
commit da3a47d6
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Convert the final dri target to the single DRI (megadriver) library.
Cleanup all the automake leftovers from the conversion stage and
update the scons build.
v2: Link in llvmpipe, when applicable.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>
Move the driver_name to dri2/drisw and remove all the SPLIT_TAGETS
mayhem. In the next step we'll unify the dri and dri-swrast targets,
completing the gallium DRI megadriver.
v2: Remove leftover st/dri Makefiles from CONFIG_FILES. Spotted by
Thomas Helland.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>
Revert "build: Build on Cygwin with gnu99 instead of c99." and define
_XOPEN_SOURCE appropriately.
This reverts commit 53e36d333c.
Since Cygwin 1.7.18 (April 2013), it's headers correctly prototype strtoll()
when using -std=c99, and correctly prototype strdup() when _XOPEN_SOURCE is
defined appropriately, so this workaround is no longer needed.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Cc: Vinson Lee <vlee@freedesktop.org>
Convert the final hardware driver to a single dri provider which
includes all the pipe-drivers.
Update the scons build and drop the unused vmw_powf.c.
Cc: José Fonseca <jfonseca@vmware.com>
Cc: Brian Paul <brianp@vmware.com>
Cc: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>
Cc: Chia-I Wu <olv@lunarg.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>
v2:
- Drop inclusion of the winsys wrapper and softpipe/llvmpipe.
- Remove old Makefile.am, target.c.
- Correctly append i915 to the megadrivers list.
Cc: Stephane Marchesin <stephane.marchesin@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>
Now we don't need a second dri module when using kgsl :)
Cc: Rob Clark <robclark@freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>
Related to previous commit, merge the separate dri targets to a single
one.
This is essentially all the buildsystem mayhem required for megaradeon.
Cc: Marek Olšák <marek.olsak@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Similiar to other targets, we'd like to convert all the separate
targets into a single one, thus we'll minimize the duplication and
overall size of mesa. The conversion per API basis, with the drivers
available either statically or shared. Currently the former is the
default.
v2: Correctly append the version script to the linker flags.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Acked-by: Tom Stellard <thomas.stellard@amd.com>
Update all three build systems, and add freedreno to the android
build. Pending future work on the ST we can convert egl-static
to provide either static or dynamic access to the pipe-drivers.
There is no functional change with this patch.
v2: Don't add freedreno to android build, drop the wrapper winsys.
Cc: Chia-I Wu <olv@lunarg.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
