r300: R5xx and R3xx use different registers for RS_IP and RS_INST

These changes are taken from the xf86-video-ati driver. They update the header
file accordingly and also remove some UNKOWN variables.
This commit is contained in:
Christoph Brill 2008-02-28 22:33:46 +01:00
parent 9c8f27ba13
commit 981b7da8a7
4 changed files with 157 additions and 97 deletions

View file

@ -375,7 +375,7 @@ void r300InitCmdBuf(r300ContextPtr r300)
ALLOC_STATE(rc, always, R300_RC_CMDSIZE, 0);
r300->hw.rc.cmd[R300_RC_CMD_0] = cmdpacket0(R300_RS_COUNT, 2);
ALLOC_STATE(ri, always, R300_RI_CMDSIZE, 0);
r300->hw.ri.cmd[R300_RI_CMD_0] = cmdpacket0(R300_RS_INTERP_0, 8);
r300->hw.ri.cmd[R300_RI_CMD_0] = cmdpacket0(R300_RS_IP_0, 8);
ALLOC_STATE(rr, variable, R300_RR_CMDSIZE, 0);
r300->hw.rr.cmd[R300_RR_CMD_0] = cmdpacket0(R300_RS_ROUTE_0, 1);
ALLOC_STATE(sc_hyperz, always, 3, 0);
@ -466,7 +466,7 @@ void r300InitCmdBuf(r300ContextPtr r300)
/* Textures */
ALLOC_STATE(tex.filter, variable, mtu + 1, 0);
r300->hw.tex.filter.cmd[R300_TEX_CMD_0] =
cmdpacket0(R300_TX_FILTER_0, 0);
cmdpacket0(R300_TX_FILTER0_0, 0);
ALLOC_STATE(tex.filter_1, variable, mtu + 1, 0);
r300->hw.tex.filter_1.cmd[R300_TEX_CMD_0] =

View file

@ -272,9 +272,9 @@ static void r300EmitClearState(GLcontext * ctx)
((dPriv->h * 6) << R300_POINTSIZE_Y_SHIFT));
R300_STATECHANGE(r300, ri);
reg_start(R300_RS_INTERP_0, 8);
reg_start(R300_RS_IP_0, 8);
for (i = 0; i < 8; ++i) {
e32(R300_RS_INTERP_USED);
e32(R300_RS_SEL_T(1) | R300_RS_SEL_R(2) | R300_RS_SEL_Q(3));
}
R300_STATECHANGE(r300, rc);

View file

@ -657,46 +657,42 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
/* This table specifies the source location and format for up to 16 texture
* addresses (i[0]:i[15]) and four colors (c[0]:c[3])
*/
#define RS_IP_0 0x4074
#define RS_IP_1 0x4078
#define RS_IP_2 0x407C
#define RS_IP_3 0x4080
#define RS_IP_4 0x4084
#define RS_IP_5 0x4088
#define RS_IP_6 0x408C
#define RS_IP_7 0x4090
#define RS_IP_8 0x4094
#define RS_IP_9 0x4098
#define RS_IP_10 0x409C
#define RS_IP_11 0x40A0
#define RS_IP_12 0x40A4
#define RS_IP_13 0x40A8
#define RS_IP_14 0x40AC
#define RS_IP_15 0x40B0
# define RS_IP_TEX_PTR_S_SHIFT 0
# define RS_IP_TEX_PTR_S_MASK 0x0000003f
# define RS_IP_TEX_PTR_T_SHIFT 6
# define RS_IP_TEX_PTR_T_MASK 0x00000fc0
# define RS_IP_TEX_PTR_R_SHIFT 12
# define RS_IP_TEX_PTR_R_MASK 0x0003f000
# define RS_IP_TEX_PTR_Q_SHIFT 18
# define RS_IP_TEX_PTR_Q_MASK 0x00fc0000
# define RS_IP_COL_PTR_SHIFT 24
# define RS_IP_COL_PTR_MASK 0x07000000
# define RS_IP_COL_FMT_RGBA (0 << 27)
# define RS_IP_COL_FMT_RGB0 (1 << 27)
# define RS_IP_COL_FMT_RGB1 (2 << 27)
#define R500_RS_IP_0 0x4074
#define R500_RS_IP_1 0x4078
#define R500_RS_IP_2 0x407C
#define R500_RS_IP_3 0x4080
#define R500_RS_IP_4 0x4084
#define R500_RS_IP_5 0x4088
#define R500_RS_IP_6 0x408C
#define R500_RS_IP_7 0x4090
#define R500_RS_IP_8 0x4094
#define R500_RS_IP_9 0x4098
#define R500_RS_IP_10 0x409C
#define R500_RS_IP_11 0x40A0
#define R500_RS_IP_12 0x40A4
#define R500_RS_IP_13 0x40A8
#define R500_RS_IP_14 0x40AC
#define R500_RS_IP_15 0x40B0
#define R500_RS_IP_TEX_PTR_S_SHIFT 0
#define R500_RS_IP_TEX_PTR_T_SHIFT 6
#define R500_RS_IP_TEX_PTR_R_SHIFT 12
#define R500_RS_IP_TEX_PTR_Q_SHIFT 18
#define R500_RS_IP_COL_PTR_SHIFT 24
#define R500_RS_IP_COL_FMT_SHIFT 27
#define R500_RS_IP_COL_FMT_RGBA (0 << 27)
#define R500_RS_IP_COL_FMT_RGB0 (1 << 27)
#define R500_RS_IP_COL_FMT_RGB1 (2 << 27)
/* gap */
# define RS_IP_COL_FMT_000A (4 << 27)
# define RS_IP_COL_FMT_0000 (5 << 27)
# define RS_IP_COL_FMT_0001 (6 << 27)
#define R500_RS_IP_COL_FMT_000A (4 << 27)
#define R500_RS_IP_COL_FMT_0000 (5 << 27)
#define R500_RS_IP_COL_FMT_0001 (6 << 27)
/* gap */
# define RS_IP_COL_FMT_111A (8 << 27)
# define RS_IP_COL_FMT_1110 (9 << 27)
# define RS_IP_COL_FMT_1111 (10 << 27)
#define R500_RS_IP_COL_FMT_111A (8 << 27)
#define R500_RS_IP_COL_FMT_1110 (9 << 27)
#define R500_RS_IP_COL_FMT_1111 (10 << 27)
/* gap */
# define RS_IP_OFFSET_DIS (0 << 31)
# define RS_IP_OFFSET_EN (1 << 31)
#define R500_RS_IP_OFFSET_DIS (0 << 31)
#define R500_RS_IP_OFFSET_EN (1 << 31)
/* gap */
@ -1124,52 +1120,64 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
* Note: The _UNKNOWN constants are always set in their respective
* register. I don't know if this is necessary.
*/
#define R300_RS_INTERP_0 0x4310
#define R300_RS_INTERP_1 0x4314
# define R300_RS_INTERP_1_UNKNOWN 0x40
#define R300_RS_INTERP_2 0x4318
# define R300_RS_INTERP_2_UNKNOWN 0x80
#define R300_RS_INTERP_3 0x431C
# define R300_RS_INTERP_3_UNKNOWN 0xC0
# define R300_RS_INTERP_SRC_SHIFT 2
# define R300_RS_INTERP_SRC_MASK (7 << 2)
# define R300_RS_INTERP_USED 0x00D10000
#define R300_RS_IP_0 0x4310
#define R300_RS_IP_1 0x4314
#define R300_RS_IP_2 0x4318
#define R300_RS_IP_3 0x431C
# define R300_RS_INTERP_SRC_SHIFT 2 /* TODO: check for removal */
# define R300_RS_INTERP_SRC_MASK (7 << 2) /* TODO: check for removal */
# define R300_RS_TEX_PTR(x) (x << 0)
# define R300_RS_COL_PTR(x) (x << 6)
# define R300_RS_COL_FMT(x) (x << 9)
# define R300_RS_COL_FMT_RGBA 0
# define R300_RS_COL_FMT_RGB0 2
# define R300_RS_COL_FMT_RGB1 3
# define R300_RS_COL_FMT_000A 4
# define R300_RS_COL_FMT_0000 5
# define R300_RS_COL_FMT_0001 6
# define R300_RS_COL_FMT_111A 8
# define R300_RS_COL_FMT_1110 9
# define R300_RS_COL_FMT_1111 10
# define R300_RS_SEL_S(x) (x << 13)
# define R300_RS_SEL_T(x) (x << 16)
# define R300_RS_SEL_R(x) (x << 19)
# define R300_RS_SEL_Q(x) (x << 22)
# define R300_RS_SEL_C0 0
# define R300_RS_SEL_C1 1
# define R300_RS_SEL_C2 2
# define R300_RS_SEL_C3 3
# define R300_RS_SEL_K0 4
# define R300_RS_SEL_K1 5
/* */
#define RS_INST_0 0x4320
#define RS_INST_1 0x4324
#define RS_INST_2 0x4328
#define RS_INST_3 0x432c
#define RS_INST_4 0x4330
#define RS_INST_5 0x4334
#define RS_INST_6 0x4338
#define RS_INST_7 0x433c
#define RS_INST_8 0x4340
#define RS_INST_9 0x4344
#define RS_INST_10 0x4348
#define RS_INST_11 0x434c
#define RS_INST_12 0x4350
#define RS_INST_13 0x4354
#define RS_INST_14 0x4358
#define RS_INST_15 0x435c
# define RS_INST_TEX_ID_SHIFT 0
# define RS_INST_TEX_ID_MASK 0x0000000f
# define RS_INST_TEX_CN_NO_WRITE (0 << 4)
# define RS_INST_TEX_CN_WRITE (1 << 4)
# define RS_INST_TEX_ADDR_SHIFT 5
# define RS_INST_TEX_ADDR_MASK 0x00000fe0
# define RS_INST_COL_ID_SHIFT 12
# define RS_INST_COL_ID_MASK 0x0000f000
# define RS_INST_COL_CN_NO_WRITE (0 << 16)
# define RS_INST_COL_CN_WRITE (1 << 16)
# define RS_INST_COL_CN_FBUFFER (2 << 16)
# define RS_INST_COL_CN_BACKFACE (3 << 16)
# define RS_INST_COL_ADDR_SHIFT 18
# define RS_INST_COL_ADDR_MASK 0x01fc0000
# define RS_INST_TEX_ADJ_REAL (0 << 25)
# define RS_INST_TEX_ADJ_ADJ (1 << 25)
# define RS_INST_W_CB_NO_WRITE (0 << 26)
# define RS_INST_W_CB_WRITE (1 << 26)
#define R500_RS_INST_0 0x4320
#define R500_RS_INST_1 0x4324
#define R500_RS_INST_2 0x4328
#define R500_RS_INST_3 0x432c
#define R500_RS_INST_4 0x4330
#define R500_RS_INST_5 0x4334
#define R500_RS_INST_6 0x4338
#define R500_RS_INST_7 0x433c
#define R500_RS_INST_8 0x4340
#define R500_RS_INST_9 0x4344
#define R500_RS_INST_10 0x4348
#define R500_RS_INST_11 0x434c
#define R500_RS_INST_12 0x4350
#define R500_RS_INST_13 0x4354
#define R500_RS_INST_14 0x4358
#define R500_RS_INST_15 0x435c
#define R500_RS_INST_TEX_ID_SHIFT 0
#define R500_RS_INST_TEX_CN_WRITE (1 << 4)
#define R500_RS_INST_TEX_ADDR_SHIFT 5
#define R500_RS_INST_COL_ID_SHIFT 12
#define R500_RS_INST_COL_CN_NO_WRITE (0 << 16)
#define R500_RS_INST_COL_CN_WRITE (1 << 16)
#define R500_RS_INST_COL_CN_WRITE_FBUFFER (2 << 16)
#define R500_RS_INST_COL_CN_WRITE_BACKFACE (3 << 16)
#define R500_RS_INST_COL_COL_ADDR_SHIFT 18
#define R500_RS_INST_TEX_ADJ (1 << 25)
#define R500_RS_INST_W_CN (1 << 26)
/* These DWORDs control how vertex data is routed into fragment program
* registers, after interpolators.
@ -1303,27 +1311,46 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
* unit. This means that e.g. the offset for texture image unit N is found in
* register TX_OFFSET_0 + (4*N)
*/
#define R300_TX_FILTER_0 0x4400
#define R300_TX_FILTER0_0 0x4400
#define R300_TX_FILTER0_1 0x4404
#define R300_TX_FILTER0_2 0x4408
#define R300_TX_FILTER0_3 0x440c
#define R300_TX_FILTER0_4 0x4410
#define R300_TX_FILTER0_5 0x4414
#define R300_TX_FILTER0_6 0x4418
#define R300_TX_FILTER0_7 0x441c
#define R300_TX_FILTER0_8 0x4420
#define R300_TX_FILTER0_9 0x4424
#define R300_TX_FILTER0_10 0x4428
#define R300_TX_FILTER0_11 0x442c
#define R300_TX_FILTER0_12 0x4430
#define R300_TX_FILTER0_13 0x4434
#define R300_TX_FILTER0_14 0x4438
#define R300_TX_FILTER0_15 0x443c
# define R300_TX_REPEAT 0
# define R300_TX_MIRRORED 1
# define R300_TX_CLAMP 4
# define R300_TX_CLAMP_TO_EDGE 2
# define R300_TX_MIRROR_ONCE_TO_EDGE 3
# define R300_TX_CLAMP 4
# define R300_TX_MIRROR_ONCE 5
# define R300_TX_CLAMP_TO_BORDER 6
# define R300_TX_MIRROR_ONCE_TO_BORDER 7
# define R300_TX_WRAP_S_SHIFT 0
# define R300_TX_WRAP_S_MASK (7 << 0)
# define R300_TX_WRAP_T_SHIFT 3
# define R300_TX_WRAP_T_MASK (7 << 3)
# define R300_TX_WRAP_Q_SHIFT 6
# define R300_TX_WRAP_Q_MASK (7 << 6)
# define R300_TX_MAG_FILTER_4 (0 << 9)
# define R300_TX_MAG_FILTER_NEAREST (1 << 9)
# define R300_TX_MAG_FILTER_LINEAR (2 << 9)
# define R300_TX_MAG_FILTER_MASK (3 << 9)
# define R300_TX_MIN_FILTER_NEAREST (1 << 11)
# define R300_TX_MIN_FILTER_LINEAR (2 << 11)
# define R300_TX_MIN_FILTER_NEAREST_MIP_NEAREST (5 << 11)
# define R300_TX_MIN_FILTER_NEAREST_MIP_LINEAR (9 << 11)
# define R300_TX_MIN_FILTER_LINEAR_MIP_NEAREST (6 << 11)
# define R300_TX_MIN_FILTER_LINEAR_MIP_LINEAR (10 << 11)
# define R300_TX_MIN_FILTER_NEAREST_MIP_NEAREST (5 << 11) /* TODO: use spec */
# define R300_TX_MIN_FILTER_NEAREST_MIP_LINEAR (9 << 11) /* TODO: use spec */
# define R300_TX_MIN_FILTER_LINEAR_MIP_NEAREST (6 << 11) /* TODO: use spec */
# define R300_TX_MIN_FILTER_LINEAR_MIP_LINEAR (10 << 11) /* TODO: use spec */
/* NOTE: NEAREST doesnt seem to exist.
* Im not seting MAG_FILTER_MASK and (3 << 11) on for all
@ -1492,8 +1519,41 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
/* 32 bit chroma key */
#define R300_TX_CHROMA_KEY_0 0x4580
#define R300_TX_CHROMA_KEY_1 0x4584
#define R300_TX_CHROMA_KEY_2 0x4588
#define R300_TX_CHROMA_KEY_3 0x458c
#define R300_TX_CHROMA_KEY_4 0x4590
#define R300_TX_CHROMA_KEY_5 0x4594
#define R300_TX_CHROMA_KEY_6 0x4598
#define R300_TX_CHROMA_KEY_7 0x459c
#define R300_TX_CHROMA_KEY_8 0x45a0
#define R300_TX_CHROMA_KEY_9 0x45a4
#define R300_TX_CHROMA_KEY_10 0x45a8
#define R300_TX_CHROMA_KEY_11 0x45ac
#define R300_TX_CHROMA_KEY_12 0x45b0
#define R300_TX_CHROMA_KEY_13 0x45b4
#define R300_TX_CHROMA_KEY_14 0x45b8
#define R300_TX_CHROMA_KEY_15 0x45bc
/* ff00ff00 == { 0, 1.0, 0, 1.0 } */
#define R300_TX_BORDER_COLOR_0 0x45C0
/* Border Color */
#define R300_TX_BORDER_COLOR_0 0x45c0
#define R300_TX_BORDER_COLOR_1 0x45c4
#define R300_TX_BORDER_COLOR_2 0x45c8
#define R300_TX_BORDER_COLOR_3 0x45cc
#define R300_TX_BORDER_COLOR_4 0x45d0
#define R300_TX_BORDER_COLOR_5 0x45d4
#define R300_TX_BORDER_COLOR_6 0x45d8
#define R300_TX_BORDER_COLOR_7 0x45dc
#define R300_TX_BORDER_COLOR_8 0x45e0
#define R300_TX_BORDER_COLOR_9 0x45e4
#define R300_TX_BORDER_COLOR_10 0x45e8
#define R300_TX_BORDER_COLOR_11 0x45ec
#define R300_TX_BORDER_COLOR_12 0x45f0
#define R300_TX_BORDER_COLOR_13 0x45f4
#define R300_TX_BORDER_COLOR_14 0x45f8
#define R300_TX_BORDER_COLOR_15 0x45fc
/* END: Texture specification */

View file

@ -1417,7 +1417,7 @@ static void r300SetupTextures(GLcontext * ctx)
}
r300->hw.tex.filter.cmd[R300_TEX_CMD_0] =
cmdpacket0(R300_TX_FILTER_0, last_hw_tmu + 1);
cmdpacket0(R300_TX_FILTER0_0, last_hw_tmu + 1);
r300->hw.tex.filter_1.cmd[R300_TEX_CMD_0] =
cmdpacket0(R300_TX_FILTER1_0, last_hw_tmu + 1);
r300->hw.tex.size.cmd[R300_TEX_CMD_0] =
@ -1490,9 +1490,9 @@ static void r300SetupRSUnit(GLcontext * ctx)
/* I'm still unsure if these are needed */
GLuint interp_magic[8] = {
0x00,
R300_RS_INTERP_1_UNKNOWN,
R300_RS_INTERP_2_UNKNOWN,
R300_RS_INTERP_3_UNKNOWN,
R300_RS_COL_PTR(1),
R300_RS_COL_PTR(2),
R300_RS_COL_PTR(3),
0x00,
0x00,
0x00,
@ -1539,7 +1539,7 @@ static void r300SetupRSUnit(GLcontext * ctx)
}
for (i = 0; i < ctx->Const.MaxTextureUnits; i++) {
r300->hw.ri.cmd[R300_RI_INTERP_0 + i] = 0 | R300_RS_INTERP_USED | (in_texcoords << R300_RS_INTERP_SRC_SHIFT)
r300->hw.ri.cmd[R300_RI_INTERP_0 + i] = 0 | R300_RS_SEL_T(1) | R300_RS_SEL_R(2) | R300_RS_SEL_Q(3) | (in_texcoords << R300_RS_INTERP_SRC_SHIFT)
| interp_magic[i];
r300->hw.rr.cmd[R300_RR_ROUTE_0 + fp_reg] = 0;