When mode is selected we only give the name of the mode as parameter.
But sometime, two different modes have the same name but not
the same vrefresh frequency.
This patch give the possibility to select a mode by its name
and optionally by its refresh frequency.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
This is helpful for differentiating between multiple devices that use
the same module.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
The compiler is unaware of that we have at least one crts/connector/plane
thus it complains that some of our variables will be used uninitialised.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Multiple the image height by 1.5 for NV12/NV21 and by 2 for NV16/NV61 to
make room for the chroma plane.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The line stride passed to the function is expressed in bytes, there's no
need to multiply it by 2.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
When building the pipeline, instead of using only the encoders attached
to a connector, take all possible encoders into account to locate a
CRTC.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The -s argument can now take a list of connectors. Configure all of them
in cloned mode using a single CRTC.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This prepares the code for handling multiple connectors in a single
pipeline in a cloned configuration.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
There's not reason to require setting a mode to test planes. Split the
two operations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Planes are associated with CRTCs, not connectors. Don't try to be too
clever, use the CRTC ID in the -P option. This prepares for splitting
CRTC and planes setup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This prepares the code for the split in separate functions of CRTC and
planes setup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This prepares the code for the split in separate functions of CRTC and
planes setup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Instead of passing the device fd and resources as global variables group
them in a device structure and pass it explictly to all functions that
need it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
As modetest automatically selects an unused plan, providing the plane ID
allows modifying plane properties for the selected planes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Extend the -P option to allow specifying the plane x and y offsets. The
position is optional, if not specified the plane will be positioned at
the center of the screen as before.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The -w parameter can be used to set a property value from the command
line, using the target object ID and the property name.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Configuring mode on more than two connectors or two planes is perfectly
valid. Support it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Instead of retrieving resources as they are needed, retrieve them all
(except property blobs) in one go at startup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
If the -d parameter is specified, modetest will drop master permissions
after setting the mode.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
If the -M parameter is specified, modetest will use the requested device
name instead of trying its builtin list of device names.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The current mostly random sort order hinders code readability. Sort the
options alphabetically in the code, and by group in the help message.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Those variables are declared in unistd.h, there's no need to redeclare
them here.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Enable all standard automake warnings except for -Wpointer-arith (as the
test pattern generation code uses void pointer arithmetics) and fix
them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Render the crosshairs for 565 and x888/a888 formats.
v2: Use the drm format to determine cairo format
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
YUV420 support is trivial to add since the code already supports
YVU420.
But it looks like the YVU420 support is a bit broken. The chroma
planes are passed in the wrong order to the fill functions, so
fix that while were at it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
The fourcc is inside the format_info structure, so if we want to use
it inside the various fill_tiles functions, we need to pass down the
whole format_info, not just the rgb/yuv infos.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Spelling out eDP or DP make for a ridicilously long string which plays
havoc with formatting. Just say eDP or DP.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
libkms only has the xrgb8888 format, so we're overallocating the bo by
quite a lot in some cases. But we still need to get the pitch from the
libkms since it's the driver that decides how to align it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Install test programs is useful in cross compilation case. By default
the behavior is the same and test programs aren't installed in $bindir.
If --enable-install-test-programs is set then test programs are
installed in $bindir.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We don't want to build libdrm tests with Cairo support under Poky, since
they're never used and also cause a build loop from libdrm -> cairo ->
mesa-dri -> libdrm.
To avoid variance in build results, introduce a --disable-cairo-tests
switch.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If color format for CRTC layer is not specified on commandline, then
c->fourcc is unintialized resulting in addfb call failing.
Signed-off-by: Rob Clark <rob@ti.com>
As the modeset test application is often referred to as an example of
the KMS API usage, move test pattern generation and buffer allocation to
a separate file to keep it simple and clear.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This will make it easier to add additional parameters to the connector
and plane arguments.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Implement tiles and SMPTE test pattern generation for the RGB565,
BGR888, RGB888, ARGB8888, BGRA8888 and BGRX8888 formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Implement tiles and SMPTE test pattern generation for the NV12, NV21,
NV16 and NV61 formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Implement tiles and SMPTE test pattern generation for the UYVY, VYUY and
YVYU formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Merge the create_test_buffer() and create_grey_buffer() functions into a
single buffer allocation function that takes the pixel format and fill
pattern as parameters.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
