Sync headers with drm-next

Synchronize drm.h, drm_mode.h and drm_fourcc.h to drm-next.

Generated using make headers_install
Generated from drm-next branch commit 0692602defb0c273f80dec9c564ca50726404aca

Signed-off-by: Simon Ser <contact@emersion.fr>

include/drm/drm.h

@@ -900,6 +900,21 @@ struct drm_get_cap {
  */
 #define DRM_CLIENT_CAP_CURSOR_PLANE_HOTSPOT	6
 
+/**
+ * DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
+ *
+ * If set to 1 the DRM core will allow setting the COLOR_PIPELINE
+ * property on a &drm_plane, as well as drm_colorop properties.
+ *
+ * Setting of these plane properties will be rejected when this client
+ * cap is set:
+ * - COLOR_ENCODING
+ * - COLOR_RANGE
+ *
+ * The client must enable &DRM_CLIENT_CAP_ATOMIC first.
+ */
+#define DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE	7
+
 /* DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */
 struct drm_set_client_cap {
 	__u64 capability;

include/drm/drm_fourcc.h

@@ -979,14 +979,20 @@ extern "C" {
  *               2 = Gob Height 8, Turing+ Page Kind mapping
  *               3 = Reserved for future use.
  *
- * 22:22 s     Sector layout.  On Tegra GPUs prior to Xavier, there is a further
+ * 22:22 s     Sector layout.  There is a further bit remapping step that occurs
- *             bit remapping step that occurs at an even lower level than the
+ * 26:27       at an even lower level than the page kind and block linear
- *             page kind and block linear swizzles.  This causes the layout of
+ *             swizzles.  This causes the bit arrangement of surfaces in memory
- *             surfaces mapped in those SOC's GPUs to be incompatible with the
+ *             to differ subtly, and prevents direct sharing of surfaces between
- *             equivalent mapping on other GPUs in the same system.
+ *             GPUs with different layouts.
  *
- *               0 = Tegra K1 - Tegra Parker/TX2 Layout.
+ *               0 = Tegra K1 - Tegra Parker/TX2 Layout
- *               1 = Desktop GPU and Tegra Xavier+ Layout
+ *               1 = Pre-GB20x, GB20x 32+ bpp, GB10, Tegra Xavier-Orin Layout
+ *               2 = GB20x(Blackwell 2)+ 8 bpp surface layout
+ *               3 = GB20x(Blackwell 2)+ 16 bpp surface layout
+ *               4 = Reserved for future use.
+ *               5 = Reserved for future use.
+ *               6 = Reserved for future use.
+ *               7 = Reserved for future use.
  *
  * 25:23 c     Lossless Framebuffer Compression type.
  *
@@ -1001,7 +1007,7 @@ extern "C" {
  *               6 = Reserved for future use
  *               7 = Reserved for future use
  *
- * 55:25 -     Reserved for future use.  Must be zero.
+ * 55:28 -     Reserved for future use.  Must be zero.
  */
 #define DRM_FORMAT_MOD_NVIDIA_BLOCK_LINEAR_2D(c, s, g, k, h) \
 	fourcc_mod_code(NVIDIA, (0x10 | \
@@ -1009,6 +1015,7 @@ extern "C" {
 				 (((k) & 0xff) << 12) | \
 				 (((g) & 0x3) << 20) | \
 				 (((s) & 0x1) << 22) | \
+				 (((s) & 0x6) << 25) | \
 				 (((c) & 0x7) << 23)))
 
 /* To grandfather in prior block linear format modifiers to the above layout,

include/drm/drm_mode.h

@@ -629,6 +629,7 @@ struct drm_mode_connector_set_property {
 #define DRM_MODE_OBJECT_FB 0xfbfbfbfb
 #define DRM_MODE_OBJECT_BLOB 0xbbbbbbbb
 #define DRM_MODE_OBJECT_PLANE 0xeeeeeeee
+#define DRM_MODE_OBJECT_COLOROP 0xfafafafa
 #define DRM_MODE_OBJECT_ANY 0
 
 struct drm_mode_obj_get_properties {
@@ -846,6 +847,20 @@ struct drm_color_ctm {
 	__u64 matrix[9];
 };
 
+struct drm_color_ctm_3x4 {
+	/*
+	 * Conversion matrix with 3x4 dimensions in S31.32 sign-magnitude
+	 * (not two's complement!) format.
+	 *
+	 * out   matrix          in
+	 * |R|   |0  1  2  3 |   | R |
+	 * |G| = |4  5  6  7 | x | G |
+	 * |B|   |8  9  10 11|   | B |
+	 *                       |1.0|
+	 */
+	__u64 matrix[12];
+};
+
 struct drm_color_lut {
 	/*
 	 * Values are mapped linearly to 0.0 - 1.0 range, with 0x0 == 0.0 and
@@ -857,6 +872,125 @@ struct drm_color_lut {
 	__u16 reserved;
 };
 
+/*
+ * struct drm_color_lut32
+ *
+ * 32-bit per channel color LUT entry, similar to drm_color_lut.
+ */
+struct drm_color_lut32 {
+	__u32 red;
+	__u32 green;
+	__u32 blue;
+	__u32 reserved;
+};
+
+/**
+ * enum drm_colorop_type - Type of color operation
+ *
+ * drm_colorops can be of many different types. Each type behaves differently
+ * and defines a different set of properties. This enum defines all types and
+ * gives a high-level description.
+ */
+enum drm_colorop_type {
+	/**
+	 * @DRM_COLOROP_1D_CURVE:
+	 *
+	 * enum string "1D Curve"
+	 *
+	 * A 1D curve that is being applied to all color channels. The
+	 * curve is specified via the CURVE_1D_TYPE colorop property.
+	 */
+	DRM_COLOROP_1D_CURVE,
+
+	/**
+	 * @DRM_COLOROP_1D_LUT:
+	 *
+	 * enum string "1D LUT"
+	 *
+	 * A simple 1D LUT of uniformly spaced &drm_color_lut32 entries,
+	 * packed into a blob via the DATA property. The driver's
+	 * expected LUT size is advertised via the SIZE property.
+	 *
+	 * The DATA blob is an array of struct drm_color_lut32 with size
+	 * of "size".
+	 */
+	DRM_COLOROP_1D_LUT,
+
+	/**
+	 * @DRM_COLOROP_CTM_3X4:
+	 *
+	 * enum string "3x4 Matrix"
+	 *
+	 * A 3x4 matrix. Its values are specified via the
+	 * &drm_color_ctm_3x4 struct provided via the DATA property.
+	 *
+	 * The DATA blob is a float[12]:
+	 * out   matrix          in
+	 * | R |   | 0  1  2  3  |   | R |
+	 * | G | = | 4  5  6  7  | x | G |
+	 * | B |   | 8  9  10 12 |   | B |
+	 */
+	DRM_COLOROP_CTM_3X4,
+
+	/**
+	 * @DRM_COLOROP_MULTIPLIER:
+	 *
+	 * enum string "Multiplier"
+	 *
+	 * A simple multiplier, applied to all color values. The
+	 * multiplier is specified as a S31.32 via the MULTIPLIER
+	 * property.
+	 */
+	DRM_COLOROP_MULTIPLIER,
+
+	/**
+	 * @DRM_COLOROP_3D_LUT:
+	 *
+	 * enum string "3D LUT"
+	 *
+	 * A 3D LUT of &drm_color_lut32 entries,
+	 * packed into a blob via the DATA property. The driver's expected
+	 * LUT size is advertised via the SIZE property, i.e., a 3D LUT with
+	 * 17x17x17 entries will have SIZE set to 17.
+	 *
+	 * The DATA blob is a 3D array of struct drm_color_lut32 with dimension
+	 * length of "size".
+	 * The LUT elements are traversed like so:
+	 *
+	 *   for B in range 0..n
+	 *     for G in range 0..n
+	 *       for R in range 0..n
+	 *        index = R + n * (G + n * B)
+	 *         color = lut3d[index]
+	 */
+	DRM_COLOROP_3D_LUT,
+};
+
+/**
+ * enum drm_colorop_lut3d_interpolation_type - type of 3DLUT interpolation
+ */
+enum drm_colorop_lut3d_interpolation_type {
+	/**
+	 * @DRM_COLOROP_LUT3D_INTERPOLATION_TETRAHEDRAL:
+	 *
+	 * Tetrahedral 3DLUT interpolation
+	 */
+	DRM_COLOROP_LUT3D_INTERPOLATION_TETRAHEDRAL,
+};
+
+/**
+ * enum drm_colorop_lut1d_interpolation_type - type of interpolation for 1D LUTs
+ */
+enum drm_colorop_lut1d_interpolation_type {
+	/**
+	 * @DRM_COLOROP_LUT1D_INTERPOLATION_LINEAR:
+	 *
+	 * Linear interpolation. Values between points of the LUT will be
+	 * linearly interpolated.
+	 */
+	DRM_COLOROP_LUT1D_INTERPOLATION_LINEAR,
+};
+
 /**
  * struct drm_plane_size_hint - Plane size hints
  * @width: The width of the plane in pixel