Bjørn Forsman 3dba00845c tablet: increase pressure offset limit from 20% to 50% ... detect_pressure_offset() currently rejects offsets that are greater than 20%. My graphics tablet (Wacom Bamboo Fun) is about 30%. The pen tip is 2 mm. Wacom recommends replacing at 1 mm, which means this isn't worn out yet and we should instead increase the limit to make these devices usable. Without this change a "pen down" event happens simultaneously with the pen being detected -- about 1 cm above the surface -- and producing libinput pressure of about 0.30. This means you start drawing "in the air", without knowing up front where the cursor is going to be. Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>		2023-08-24 08:04:03 +02:00
..
api	doc/api: set HAVE_DOT to YES	2023-01-17 10:54:10 +10:00
user	tablet: increase pressure offset limit from 20% to 50%	2023-08-24 08:04:03 +02:00
button-debouncing-state-machine.svg	evdev: restart debouncing timers after every event	2021-05-19 12:24:59 +02:00
button-debouncing-wave-diagram.txt	evdev: add new debouncing code	2017-11-20 09:55:05 +10:00
middle-button-emulation.svg	evdev: add support for middle button emulation	2015-04-17 12:50:03 +10:00
touchpad-edge-scrolling-state-machine.svg	touchpad: Add edge-scrolling support	2014-11-25 17:02:30 +10:00
touchpad-gestures-state-machine.svg	doc: document disambiguation between two finger pinch and scroll	2022-01-27 08:35:30 +01:00
touchpad-softbutton-state-machine.svg	touchpad: Route top softbuttons through the trackstick if we've one	2014-09-19 08:20:00 +10:00
touchpad-tap-state-machine.svg	touchpad: permit only one finger on the touchpad at the start of a tap-drag	2021-02-15 05:46:46 +00:00