libinput/test/litest-device-wacom-cintiq-13hdt-pen.c

/*
 * Copyright © 2016 Red Hat, Inc.
 *
 * Permission to use, copy, modify, distribute, and sell this software and its
 * documentation for any purpose is hereby granted without fee, provided that
 * the above copyright notice appear in all copies and that both that copyright
 * notice and this permission notice appear in supporting documentation, and
 * that the name of the copyright holders not be used in advertising or
 * publicity pertaining to distribution of the software without specific,
 * written prior permission.  The copyright holders make no representations
 * about the suitability of this software for any purpose.  It is provided "as
 * is" without express or implied warranty.
 *
 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
 * OF THIS SOFTWARE.
 */

#if HAVE_CONFIG_H
#include "config.h"
#endif

#include "litest.h"
#include "litest-int.h"

static void litest_wacom_cintiq_tablet_setup(void)
{
	struct litest_device *d = litest_create_device(LITEST_WACOM_CINTIQ_13HDT_PEN);
	litest_set_current_device(d);
}

static struct input_event proximity_in[] = {
	{ .type = EV_ABS, .code = ABS_X, .value = LITEST_AUTO_ASSIGN },
	{ .type = EV_ABS, .code = ABS_Y, .value = LITEST_AUTO_ASSIGN },
	{ .type = EV_ABS, .code = ABS_DISTANCE, .value = LITEST_AUTO_ASSIGN },
	{ .type = EV_ABS, .code = ABS_PRESSURE, .value = LITEST_AUTO_ASSIGN },
	{ .type = EV_ABS, .code = ABS_TILT_X, .value = LITEST_AUTO_ASSIGN },
	{ .type = EV_ABS, .code = ABS_TILT_Y, .value = LITEST_AUTO_ASSIGN },
	{ .type = EV_ABS, .code = ABS_MISC, .value = 2083 },
	{ .type = EV_MSC, .code = MSC_SERIAL, .value = 297797542 },
	{ .type = EV_KEY, .code = BTN_TOOL_PEN, .value = 1 },
	{ .type = EV_SYN, .code = SYN_REPORT, .value = 0 },
	{ .type = -1, .code = -1 },
};

static struct input_event proximity_out[] = {
	{ .type = EV_ABS, .code = ABS_X, .value = 0 },
	{ .type = EV_ABS, .code = ABS_Y, .value = 0 },
	{ .type = EV_ABS, .code = ABS_DISTANCE, .value = 0 },
	{ .type = EV_ABS, .code = ABS_TILT_X, .value = 0 },
	{ .type = EV_ABS, .code = ABS_TILT_Y, .value = 0 },
	{ .type = EV_ABS, .code = ABS_MISC, .value = 0 },
	{ .type = EV_MSC, .code = MSC_SERIAL, .value = 297797542 },
	{ .type = EV_KEY, .code = BTN_TOOL_PEN, .value = 0 },
	{ .type = EV_SYN, .code = SYN_REPORT, .value = 0 },
	{ .type = -1, .code = -1 },
};

static struct input_event motion[] = {
	{ .type = EV_ABS, .code = ABS_X, .value = LITEST_AUTO_ASSIGN },
	{ .type = EV_ABS, .code = ABS_Y, .value = LITEST_AUTO_ASSIGN },
	{ .type = EV_ABS, .code = ABS_DISTANCE, .value = LITEST_AUTO_ASSIGN },
	{ .type = EV_ABS, .code = ABS_PRESSURE, .value = LITEST_AUTO_ASSIGN },
	{ .type = EV_ABS, .code = ABS_TILT_X, .value = LITEST_AUTO_ASSIGN },
	{ .type = EV_ABS, .code = ABS_TILT_Y, .value = LITEST_AUTO_ASSIGN },
	{ .type = EV_MSC, .code = MSC_SERIAL, .value = 297797542 },
	{ .type = EV_SYN, .code = SYN_REPORT, .value = 0 },
	{ .type = -1, .code = -1 },
};

static int
get_axis_default(struct litest_device *d, unsigned int evcode, int32_t *value)
{
	switch (evcode) {
	case ABS_TILT_X:
	case ABS_TILT_Y:
		*value = 0;
		return 0;
	case ABS_PRESSURE:
		*value = 100;
		return 0;
	case ABS_DISTANCE:
		*value = 0;
		return 0;
	}
	return 1;
}

static struct litest_device_interface interface = {
	.tablet_proximity_in_events = proximity_in,
	.tablet_proximity_out_events = proximity_out,
	.tablet_motion_events = motion,

	.get_axis_default = get_axis_default,
};

static struct input_absinfo absinfo[] = {
	{ ABS_X, 400, 59152, 4, 0, 200 },
	{ ABS_Y, 400, 33448, 4, 0, 200 },
	{ ABS_Z, -900, 899, 0, 0, 287 },
	{ ABS_WHEEL, 0, 1023, 0, 0, 0 },
	{ ABS_THROTTLE, 0, 71, 0, 0, 0 },
	{ ABS_PRESSURE, 0, 2047, 0, 0, 0 },
	{ ABS_DISTANCE, 0, 63, 1, 0, 0 },
	{ ABS_TILT_X, -64, 63, 1, 0, 57 },
	{ ABS_TILT_Y, -64, 63, 1, 0, 57 },
	{ ABS_MISC, 0, 0, 0, 0, 0 },
	{ .value = -1 },
};

static struct input_id input_id = {
	.bustype = 0x3,
	.vendor = 0x56a,
	.product = 0x333,
	.version = 0x110,
};

static int events[] = {
	EV_KEY, BTN_TOOL_PEN,
	EV_KEY, BTN_TOOL_RUBBER,
	EV_KEY, BTN_TOOL_BRUSH,
	EV_KEY, BTN_TOOL_PENCIL,
	EV_KEY, BTN_TOOL_AIRBRUSH,
	EV_KEY, BTN_TOUCH,
	EV_KEY, BTN_STYLUS,
	EV_KEY, BTN_STYLUS2,
	EV_MSC, MSC_SERIAL,
	INPUT_PROP_MAX, INPUT_PROP_DIRECT,
	-1, -1,
};

static const char udev_rule[] =
"ACTION==\"remove\", GOTO=\"rule_end\"\n"
"KERNEL!=\"event*\", GOTO=\"rule_end\"\n"
"\n"
"ATTRS{name}==\"litest Wacom Cintiq 13 HD touch Pen*\",\\\n"
"    ENV{LIBINPUT_DEVICE_GROUP}=\"wacom-13hdt-group\"\n"
"\n"
"LABEL=\"rule_end\"";

struct litest_test_device litest_wacom_cintiq_13hdt_pen_device = {
	.type = LITEST_WACOM_CINTIQ_13HDT_PEN,
	.features = LITEST_TABLET | LITEST_DISTANCE | LITEST_TOOL_SERIAL | LITEST_TILT,
	.shortname = "wacom-cintiq-13hdt-pen-tablet",
	.setup = litest_wacom_cintiq_tablet_setup,
	.interface = &interface,

	.name = "Wacom Cintiq 13 HD touch Pen",
	.id = &input_id,
	.events = events,
	.absinfo = absinfo,
	.udev_rule = udev_rule,
};