.clang-format

@@ -1,82 +0,0 @@
-AlignAfterOpenBracket: Align
-# This option we want but it's frequently broken and causes bad
-# misalignment. The canary is wheel_click_count_parser, if that works
-# we can actually enable it.
-# AlignArrayOfStructures: Left
-AlignConsecutiveAssignments: false
-AlignConsecutiveDeclarations: false
-AlignConsecutiveMacros: true
-AlignConsecutiveShortCaseStatements:
-  Enabled: true
-  AcrossEmptyLines: false
-  AcrossComments: true
-  AlignCaseColons: false
-AlignEscapedNewlines: Right
-AlignOperands: Align
-AlignTrailingComments: true
-AllowAllArgumentsOnNextLine: false
-AllowAllParametersOfDeclarationOnNextLine: false
-AllowShortBlocksOnASingleLine: false
-AllowShortCaseLabelsOnASingleLine: false
-AllowShortFunctionsOnASingleLine: false
-AllowShortIfStatementsOnASingleLine: false
-AllowShortLoopsOnASingleLine: false
-AlwaysBreakBeforeMultilineStrings: true
-BinPackArguments: false
-BinPackParameters: OnePerLine
-BraceWrapping:
-  AfterFunction: true
-BreakAfterReturnType: All
-BreakBeforeBraces: Custom
-BreakStringLiterals: false
-ColumnLimit: 88
-ContinuationIndentWidth: 8
-Cpp11BracedListStyle: false
-IncludeBlocks: Regroup
-IncludeCategories:
-  - Regex:           '^(<|")config\.h(>|")'
-    Priority:        0
-    SortPriority:    0
-  - Regex:           '^<.*'
-    Priority:        1
-    SortPriority:    0
-  - Regex:           '^"util-.*'
-    Priority:        2
-    SortPriority:    0
-  - Regex:           '.*'
-    Priority:        3
-    SortPriority:    0
-IndentCaseLabels: false
-IndentGotoLabels: false
-IndentWidth: 8
-MaxEmptyLinesToKeep: 1
-PointerAlignment: Right
-ReflowComments: true
-RemoveEmptyLinesInUnwrappedLines: true
-RemoveParentheses: MultipleParentheses
-RemoveSemicolon: true
-SkipMacroDefinitionBody: true
-SortIncludes: true
-SpaceAfterCStyleCast: false
-SpaceAfterLogicalNot: false
-SpaceBeforeAssignmentOperators: true
-SpaceBeforeCaseColon: false
-SpaceBeforeParens: ControlStatementsExceptControlMacros
-SpacesInContainerLiterals: true
-SpacesInParens: Custom
-TabWidth: 8
-UseTab: ForContinuationAndIndentation
-
-ForEachMacros:
-  - ARRAY_FOR_EACH
-  - list_for_each
-  - list_for_each_safe
-  - tp_for_each_touch
-  - range_for_each
-  - litest_log_group
-  - litest_with_logcapture
-  - litest_with_parameters
-  - litest_with_event_frame
-  - udev_list_entry_foreach
-# END_TEST is defined as something that enforces a line break
-Macros: [ "CASE_RETURN_STRING(s)=case s: return s", "START_TEST(s)=static void s(void)", "END_TEST=enum foo;"]

.clang-format-ignore

@@ -1 +0,0 @@
-include/**/*

.clang-tidy

@@ -1,7 +0,0 @@
-# optin.core.unix.Malloc: disabled so we can use __attribute__((cleanup)) without leak complaints
-# optin.core.EnumCastOutOfRange: disabled because we use a lot of "wrong" enum values for testing
-#                                and internally and don't want those values leak into the public API
-Checks: >
-  -clang-analyzer-unix.Malloc,
-  -clang-analyzer-optin.core.EnumCastOutOfRange
-WarningsAsErrors: '*'

.clang-tidy-ignore

@@ -1 +0,0 @@
-include/*

.dir-locals.el

@@ -1,4 +0,0 @@
-((nil . ((indent-tabs-mode . t)
-         (tab-width . 8)
-         (fill-column . 80)))
- (c-mode . ((c-basic-offset . 8))))

.editorconfig

@@ -1,25 +0,0 @@
-# https://editorconfig.org/
-
-root = true
-
-[*]
-charset = utf-8
-end_of_line = lf
-trim_trailing_whitespace = true
-insert_final_newline = true
-
-[*.{c,h}]
-indent_size = 8
-indent_style = tab
-
-[*.py]
-indent_size = 4
-indent_style = space
-
-[{meson.build,meson_options.txt}]
-indent_size = 8
-indent_style = tab
-
-[*.sym]
-indent_size = 8
-indent_style = tab

.git-blame-ignore-revs

@@ -1,21 +0,0 @@
-# This file contains revisions to be ignored by git blame.
-# These revisions are expected to be formatting-only changes.
-#
-# Calling `git blame --ignore-revs-file .git-blame-ignore-revs` will
-# tell git blame to ignore changes made by these revisions when assigning
-# assigning blame, as if the change never happened.
-#
-# You can enable this as a default for your local repository by running
-# `git config blame.ignoreRevsFile .git-blame-ignore-revs`
-# Important: if you do this, then switch to a branch without this file,
-# `git blame` will fail with an error.
-#
-
-# Run clang-format over the code
-2a1095924b0be60f822bc0ff20d567e209a9db73
-
-# Add trailing commas to prevent clang-format oddities
-aebf3cd4915adc576cf055926caa621e098ec32b
-
-# Fix some inconsistent whitespace.
-60abf1575560cb8e2220ae48a67e7f74b5dc70dd

.gitignore

@@ -1,3 +1,7 @@
+*.o
+*.pc
+*.la
+*.lo
 *.swp
 *~
 *.sig
@@ -6,7 +10,29 @@
 *.patch
 *.rej
 *.trs
-*.gcda
+Makefile
-*.gcno
+Makefile.in
+aclocal.m4
+autom4te.cache/
+config.guess
+config.h
+config.h.in
+config.log
+config.status
+config.sub
+configure
+depcomp
+install-sh
+libtool
+ltmain.sh
+missing
+stamp-h1
+.libs/
+.deps/
+src/libinput-version.h
+doc/libinput.doxygen
+doc/html
 tags
-*.gnuplot
+test/test-*
+test/symbols-leak-test*
+test-driver

.gitlab-ci/ci.template

@@ -1,803 +0,0 @@
-# vim: set expandtab shiftwidth=2 tabstop=8 textwidth=0 filetype=yaml:
-
-{# You're looking at the template here, so you can ignore the below
-   warning. This is the right file to edit #}
-########################################
-#                                      #
-# THIS FILE IS GENERATED, DO NOT EDIT  #
-#                                      #
-########################################
-
-# To change the gitlab CI, edit .gitlab-ci/ci.template and/or .gitlab-ci/config.yaml
-# and run ci-fairy generate-template. For details, see
-# https://freedesktop.pages.freedesktop.org/ci-templates/ci-fairy.html#templating-gitlab-ci-yml
-
-# This is a bit complicated for two reasons:
-# - we really want to run dnf/apt/... only once, updating on the test runner for
-#   each job takes forever. So we create a container image for each distribution
-#   tested, then run the tests on this container image.
-#
-#   This is handled by the ci-templates, ensuring containers are only rebuilt
-#   when the TAG changes.
-#
-# - GitLab only allows one script: set per job but we have a bunch of commands
-#   we need to re-run for each build (meson && ninja && etc). YAML cannot merge
-#   arrays so we're screwed.
-#
-#   So instead we use a default_build template and override everything with
-#   variables. The only two variables that matter:
-#     MESON_ARGS=-Denable-something=true
-#     NINJA_ARGS=dist ... to run 'ninja -C builddir dist'
-#   Note that you cannot use scripts: in any target if you expect default_build
-#   to work.
-#
-#
-# All jobs must follow the naming scheme of
-# <distribution>:<version>@activity:
-#  e.g. fedora:31@build-default
-
-.templates_sha: &template_sha c6aeb16f86e32525fa630fb99c66c4f3e62fc3cb
-
-include:
-  - project: 'freedesktop/ci-templates'
-    ref: *template_sha
-    file:
-      - '/templates/ci-fairy.yml'
-  {% for distro in distributions|sort(attribute="name") %}
-      # {{ distro.name.capitalize() }} container builder template
-      - '/templates/{{distro.name}}.yml'
-  {% endfor %}
-
-workflow:
-  rules:
-    # do not duplicate pipelines on merge pipelines
-    - if: $CI_COMMIT_BRANCH && $CI_OPEN_MERGE_REQUESTS && $CI_PIPELINE_SOURCE == "push"
-      when: never
-    # merge pipeline
-    - if: &is-merge-attempt $GITLAB_USER_LOGIN == "marge-bot" && $CI_PIPELINE_SOURCE == "merge_request_event"
-      variables:
-        FDO_RUNNER_JOB_PRIORITY_TAG_X86_64: priority:high
-        FDO_RUNNER_JOB_PRIORITY_TAG_X86_64_KVM: priority:high-kvm
-        FDO_RUNNER_JOB_PRIORITY_TAG_AARCH64: priority:high-aarch64
-    # post-merge pipeline
-    - if: &is-post-merge $GITLAB_USER_LOGIN == "marge-bot" && $CI_PIPELINE_SOURCE == "push"
-      variables:
-        FDO_RUNNER_JOB_PRIORITY_TAG_X86_64: priority:high
-        FDO_RUNNER_JOB_PRIORITY_TAG_X86_64_KVM: priority:high-kvm
-        FDO_RUNNER_JOB_PRIORITY_TAG_AARCH64: priority:high-aarch64
-    # Pre-merge pipeline
-    - if: &is-pre-merge $CI_PIPELINE_SOURCE == "merge_request_event"
-    # Push to a branch on a fork
-    - if: $CI_COMMIT_BRANCH
-
-stages:
-  - sanity check     # CI/commit checks
-  - prep             # prep work like rebuilding the container images if there is a change
-  - build            # for actually building and testing things in a container
-  - test-suite       # for running the test suite in a VM
-  - test-suite-no-libwacom # for running the test suite in a VM (libwacom disabled)
-  - valgrind         # for running the test suite under valgrind in a VM
-  - distro           # distribs test
-  - deploy           # trigger wayland's website generation
-  - container_clean  # clean up unused container images (scheduled jobs only)
-
-variables:
-  ###############################################################################
-  # This is the list of packages required to build libinput with the default    #
-  # configuration.                                                              #
-  #                                                                             #
-  # Run dnf install/apt-get install/.. with the list of packages for your       #
-  # distribution                                                                #
-  #                                                                             #
-  # See the documentation here:                                                 #
-  # https://wayland.freedesktop.org/libinput/doc/latest/building.html           #
-  ###############################################################################
-{% for distro in distributions %}
-  {{"%-17s" | format(distro.name.upper() + '_PACKAGES:')}} '{{ distro.packages|join(' ')}}'
-{% endfor %}
-  ############################ end of package lists #############################
-
-  # these tags should be updated each time the list of packages is updated
-  # changing these will force rebuilding the associated image
-  # Note: these tags have no meaning and are not tied to a particular
-  # libinput version
-{% for distro in distributions %}
-  {{"%-13s"| format(distro.name.upper() + '_TAG:')}}'{{distro.tag}}'
-{% endfor %}
-
-  FDO_UPSTREAM_REPO: libinput/libinput
-
-  MESON_BUILDDIR: "build dir"
-  NINJA_ARGS: ''
-  MESON_ARGS: ''
-  MESON_TEST_ARGS: '--no-suite=hardware'
-
-  # udev isn't available/working properly in the containers
-  UDEV_NOT_AVAILABLE: 1
-  GIT_DEPTH: 1
-
-  # Default priority for non-merge pipelines
-  FDO_RUNNER_JOB_PRIORITY_TAG_X86_64: ""  # Empty tags are ignored by gitlab
-  FDO_RUNNER_JOB_PRIORITY_TAG_X86_64_KVM: kvm
-  FDO_RUNNER_JOB_PRIORITY_TAG_AARCH64: aarch64
-
-.policy:
-  retry:
-    max: 2
-    when:
-      - runner_system_failure
-      - stuck_or_timeout_failure
-  # cancel run when a newer version is pushed to the branch
-  interruptible: true
-  dependencies: []
-
-.policy-retry-on-failure:
-  retry:
-    max: 1
-    when:
-      - runner_system_failure
-      - stuck_or_timeout_failure
-  # cancel run when a newer version is pushed to the branch
-  interruptible: true
-  dependencies: []
-
-.default_artifacts:
-  artifacts:
-    name: "meson-logs-$CI_JOB_NAME"
-    when: always
-    expire_in: 1 week
-    paths:
-      - $MESON_BUILDDIR/meson-logs
-      - $MESON_BUILDDIR/valgrind.*.log
-    reports:
-      junit: $MESON_BUILDDIR/*junit*.xml
-
-.fdo-runner-tags:
-  tags:
-    - $FDO_RUNNER_JOB_PRIORITY_TAG_X86_64
-
-
-#################################################################
-#                                                               #
-#                     sanity check stage                        #
-#                                                               #
-#################################################################
-
-fail-if-fork-is-not-public:
-  extends:
-    - .fdo-runner-tags
-  stage: sanity check
-  script:
-    - |
-      if [ $CI_PROJECT_VISIBILITY != "public" ]; then
-           echo "*************************************************************************************"
-           echo "Project visibility must be set to 'public'"
-           echo "Change this in $CI_PROJECT_URL/edit under 'Visibility, project features, permissions'"
-           echo "*************************************************************************************"
-           exit 1
-      fi
-  except:
-    - main@libinput/libinput
-
-# Re-generate the CI script and make sure it's the one currently checked in
-# If this job fails, re-generate the gitlab-ci.yml script, see
-# $SRCDIR/.gitlab-ci/generate-gitlab-ci.py
-#
-check-ci-script:
-  extends:
-    - .fdo.ci-fairy
-    - .fdo-runner-tags
-  stage: sanity check
-  script:
-    - ci-fairy generate-template --verify && exit 0 || true
-    - >
-      printf "%s\n" \
-        "Committed gitlab-ci.yml differs from generated gitlab-ci.yml. Please verify" \
-        "https://wayland.freedesktop.org/libinput/doc/latest/contributing.html"
-    - exit 1
-
-#
-# Verify that commit messages are as expected, etc.
-#
-
-check-commit:
-  extends:
-    - .fdo.ci-fairy
-    - .fdo-runner-tags
-  stage: sanity check
-  script:
-    - ci-fairy -vv check-commits --junit-xml=results.xml && exit 0 || true
-    - >
-      printf "%s\n" \
-        "Error checking commit format. Please verify" \
-        "https://wayland.freedesktop.org/libinput/doc/latest/contributing.html"
-    - exit 1
-  except:
-    - main@libinput/libinput
-  variables:
-    GIT_DEPTH: 100
-  artifacts:
-    reports:
-      junit: results.xml
-
-
-#
-# Check for trailing whitespaces
-#
-
-check-whitespace:
-  extends:
-    - .fdo.ci-fairy
-    - .fdo-runner-tags
-  stage: sanity check
-  script:
-    - .gitlab-ci/whitespace-check.py $(git ls-files)
-
-#
-# pre-commit hooks
-#
-
-pre-commit-hooks:
-  extends:
-    - .fdo.ci-fairy
-    - .fdo-runner-tags
-  stage: sanity check
-  script:
-    - python3 -m venv venv
-    - source venv/bin/activate
-    - pip3 install pre-commit
-    - pre-commit run --all-files
-    - git diff --exit-code || (echo "ERROR - Code style errors found, please fix" && false)
-
-#################################################################
-#                                                               #
-#                          prep stage                           #
-#                                                               #
-#################################################################
-
-{% for distro in distributions %}
-{% for version in distro.versions %}
-{{distro.name}}:{{version}}@container-prep:
-  extends:
-{% if distro.qemu_based %}
-    - .fdo.qemu-build@{{distro.name}}
-{% else %}
-    - .fdo.container-build@{{distro.name}}
-{% endif %}
-    - .policy
-    - .fdo-runner-tags
-{% if distro.qemu_based %}
-  tags:
-    - $FDO_RUNNER_JOB_PRIORITY_TAG_X86_64_KVM
-{% endif %}
-  stage: prep
-  variables:
-    GIT_STRATEGY: none
-    FDO_DISTRIBUTION_VERSION: '{{version}}'
-    FDO_DISTRIBUTION_PACKAGES: ${{distro.name.upper()}}_PACKAGES
-    FDO_DISTRIBUTION_TAG: ${{distro.name.upper()}}_TAG
-
-{% endfor %}
-{% endfor %}
-
-
-#################################################################
-#                                                               #
-#                   container clean stage                       #
-#                 run during the clean stage                    #
-#                                                               #
-#################################################################
-
-#
-# This stage will look for the container images we currently have in
-# the registry and will remove any that are not tagged with the provided
-# $container_image:$tag
-#
-.container-clean:
-  extends:
-    - .policy
-    - .fdo.ci-fairy
-    - .fdo-runner-tags
-  stage: container_clean
-  script:
-    # Go to your Profile, Settings, Access Tokens
-    # Create a personal token with 'api' scope, copy the value.
-    # Go to CI/CD, Schedules, schedule a new monthly job (or edit the existing one)
-    # Define a variable of type File named AUTHFILE. Content is that token
-    # value.
-    - ci-fairy -v --authfile $AUTHFILE delete-image
-            --repository $FDO_DISTRIBUTION_NAME/$FDO_DISTRIBUTION_VERSION
-            --exclude-tag $FDO_DISTRIBUTION_TAG
-  allow_failure: true
-  only:
-    - schedules
-
-{% for distro in distributions %}
-{% for version in distro.versions %}
-{{distro.name}}:{{version}}@container-clean:
-  extends:
-    - .policy
-    - .container-clean
-  variables:
-    GIT_STRATEGY: none
-    CURRENT_CONTAINER_IMAGE: $CI_REGISTRY_IMAGE/{{distro.name}}/$FDO_DISTRIBUTION_VERSION:$FDO_DISTRIBUTION_TAG
-    FDO_DISTRIBUTION_VERSION: '{{version}}'
-    FDO_DISTRIBUTION_TAG: ${{distro.name.upper()}}_TAG
-
-{% endfor %}
-{% endfor %}
-
-#################################################################
-#                                                               #
-#                       build stage                             #
-#                                                               #
-#################################################################
-
-.build@template:
-  extends:
-    - .policy
-    - .default_artifacts
-    - .fdo-runner-tags
-  stage: build
-  script:
-    - .gitlab-ci/meson-build.sh
-
-
-# Run meson and meson test in the container image through qemu
-.build-in-vng@template:
-  extends:
-    - .policy
-    - .default_artifacts
-  tags:
-    - $FDO_RUNNER_JOB_PRIORITY_TAG_X86_64_KVM
-  variables:
-    MESON_BUILDDIR: build_dir
-    VNG_KERNEL: {{ vng.kernel }}
-  script:
-    # first build in the host container
-    - .gitlab-ci/meson-build.sh --skip-test
-
-    - mkdir -p $MESON_BUILDDIR
-    - curl -LO $VNG_KERNEL
-
-    - export -p > .vngenv
-
-    # runs the test suite only
-    - |
-      vng --run ./bzImage \
-          --user root \
-          --overlay-rwdir=$HOME \
-          --append HOME=$HOME \
-          --overlay-rwdir=$(pwd) \
-          --rwdir=$MESON_BUILDDIR \
-          --exec "source $PWD/.vngenv; rm $PWD/.vngenv; .gitlab-ci/meson-build.sh --skip-setup --skip-build --run-test"
-
-#
-# Fedora
-#
-
-.check_tainted: &check_tainted |
-  # make sure the kernel is not tainted
-  if [[ "$(ssh localhost -p 5555 cat /proc/sys/kernel/tainted)" -gt 0 ]];
-  then
-    echo tainted kernel ;
-    exit 1 ;
-  fi
-
-# Run meson and meson test in the qemu image
-.build-in-qemu@template:
-  extends:
-    - .policy
-  tags:
-    - $FDO_RUNNER_JOB_PRIORITY_TAG_X86_64_KVM
-  variables:
-    MESON_BUILDDIR: build_dir
-  script:
-    # start our vm, no args required
-    - /app/vmctl start || (echo "Error - Failed to start the VM." && exit 1)
-
-    - *check_tainted
-
-    - "scp -r $PWD vm:"
-    - echo "CI_JOB_ID=\"$CI_JOB_ID\"" > sshenv
-    - echo "CI_JOB_NAME=\"$CI_JOB_NAME\"" >> sshenv
-    - echo "MESON_ARGS=\"$MESON_ARGS\"" >> sshenv
-    - echo "MESON_BUILDDIR=\"$MESON_BUILDDIR\"" >> sshenv
-    - echo "MESON_TEST_ARGS=\"$MESON_TEST_ARGS\"" >> sshenv
-    - echo "NINJA_ARGS=\"$NINJA_ARGS\"" >> sshenv
-    - "scp sshenv vm:~/$CI_PROJECT_NAME/.meson_environment"
-    - /app/vmctl exec "cd $CI_PROJECT_NAME ; .gitlab-ci/meson-build.sh" && touch .success || true
-    # no matter the results of the tests, we want to fetch the logs
-    - scp -r vm:$CI_PROJECT_NAME/$MESON_BUILDDIR .
-
-    - *check_tainted
-
-    - /app/vmctl stop
-
-    - if [[ ! -e .success ]] ;
-      then
-        exit 1 ;
-      fi
-  artifacts:
-    name: "qemu-meson-logs-$CI_JOB_NAME"
-    when: always
-    expire_in: 1 week
-    paths:
-      - $MESON_BUILDDIR/meson-logs
-      - console.out
-    reports:
-      junit: $MESON_BUILDDIR/*junit*.xml
-
-
-# Run in a test suite. Special variables:
-# - SUITES: the meson test suites to run, or
-# - SUITE_NAMES: all elements will be expanded to libinput-test-suite-$value
-# Set one or the other, not both.
-.test-suite-vm:
-  extends:
-    - .build-in-vng@template
-  stage: test-suite
-  variables:
-    # remove the global --no-suite=hardware
-    MESON_TEST_ARGS: ''
-    LITEST_JOBS: 4
-  before_script:
-    - if ! [[ -z $SUITE_NAMES ]]; then SUITES=$(echo $SUITE_NAMES | sed 's/\([^ ]*\)/libinput-test-suite-\1/g'); fi
-    - echo "Testing $SUITES"
-    - export MESON_TEST_ARGS="$MESON_TEST_ARGS $SUITES"
-
-
-{# qemu tests are only done for the latest version of any distribution #}
-{% for distro in distributions if distro.use_for_qemu_tests %}
-{% set version = "{}".format(distro.versions|last()) %}
-.{{distro.name}}:{{version}}@test-suite-vm:
-  extends:
-    - .fdo.distribution-image@{{distro.name}}
-    - .test-suite-vm
-  variables:
-    FDO_DISTRIBUTION_VERSION: {{version}}
-    FDO_DISTRIBUTION_TAG: ${{distro.name.upper()}}_TAG
-  needs:
-    - "{{distro.name}}:{{version}}@container-prep"
-
-
-{% for suite in test_suites %}
-vm-{{suite.name}}:
-  extends:
-    - .{{distro.name}}:{{version}}@test-suite-vm
-  variables:
-    SUITE_NAMES: '{{suite.suites|join(' ')}}'
-
-vm-{{suite.name}}-no-libwacom:
-  extends:
-    - vm-{{suite.name}}
-  stage: test-suite-no-libwacom
-  variables:
-    MESON_ARGS: '-Dlibwacom=false'
-
-{% endfor %}
-
-{% for suite in test_suites %}
-vm-valgrind-{{suite.name}}:
-  stage: valgrind
-  extends:
-    - vm-{{suite.name}}
-    - .policy-retry-on-failure
-  variables:
-    MESON_TEST_ARGS: '--setup=valgrind'
-    LITEST_JOBS: 0
-  retry:
-    max: 2
-  rules:
-    - if: $GITLAB_USER_LOGIN != "marge-bot"
-
-{% endfor %}
-
-{% endfor %}{# for if distro.use_for_qemu_tests #}
-
-{% for distro in distributions if distro.use_for_custom_build_tests %}
-{% set version = "{}".format(distro.versions|last()) %}
-.{{distro.name}}-build@template:
-  extends:
-    - .fdo.distribution-image@{{distro.name}}
-    - .build@template
-  variables:
-    FDO_DISTRIBUTION_VERSION: '{{version}}'
-    FDO_DISTRIBUTION_TAG: ${{distro.name.upper()}}_TAG
-  needs:
-    - "{{distro.name}}:{{version}}@container-prep"
-
-default-build-release@{{distro.name}}:{{version}}:
-  stage: distro
-  extends:
-    - .{{distro.name}}-build@template
-  variables:
-    MESON_ARGS: "-Dbuildtype=release"
-    CFLAGS: "-Werror"
-
-clang-tidy@{{distro.name}}:{{version}}:
-  extends:
-    - .{{distro.name}}-build@template
-  variables:
-    NINJA_ARGS: ''
-    MESON_TEST_ARGS: ''
-    CC: 'clang'
-  script:
-    - .gitlab-ci/meson-build.sh
-    - ninja -C "$MESON_BUILDDIR" clang-tidy
-
-# Below jobs are build option combinations. We only
-# run them on one image, they shouldn't fail on one distro
-# when they succeed on another.
-
-build-no-libwacom@{{distro.name}}:{{version}}:
-  extends:
-    - .{{distro.name}}-build@template
-  variables:
-    MESON_ARGS: "-Dlibwacom=false"
-
-build-no-libwacom-nodeps@{{distro.name}}:{{version}}:
-  extends:
-    - .{{distro.name}}-build@template
-  variables:
-    MESON_ARGS: "-Dlibwacom=false"
-  before_script:
-    - dnf remove -y libwacom libwacom-devel
-
-build-no-mtdev@{{distro.name}}:{{version}}:
-  extends:
-    - .{{distro.name}}-build@template
-  variables:
-    MESON_ARGS: "-Dmtdev=false"
-
-build-no-mtdev-nodeps@{{distro.name}}:{{version}}:
-  extends:
-    - .{{distro.name}}-build@template
-  variables:
-    MESON_ARGS: "-Dmtdev=false"
-  before_script:
-    - dnf remove -y mtdev mtdev-devel
-
-build-no-lua@{{distro.name}}:{{version}}:
-  extends:
-    - .{{distro.name}}-build@template
-  variables:
-    MESON_ARGS: "-Dlua-plugins=disabled"
-
-build-no-lua-nodeps@{{distro.name}}:{{version}}:
-  extends:
-    - .{{distro.name}}-build@template
-  variables:
-    MESON_ARGS: "-Dlua-plugins=disabled"
-  before_script:
-    - dnf remove -y lua lua-devel
-
-build-docs@{{distro.name}}:{{version}}:
-  extends:
-    - .{{distro.name}}-build@template
-  variables:
-    MESON_ARGS: "-Ddocumentation=true"
-
-build-no-docs-nodeps@{{distro.name}}:{{version}}:
-  extends:
-    - .{{distro.name}}-build@template
-  variables:
-    MESON_ARGS: "-Ddocumentation=false"
-  before_script:
-    - dnf remove -y doxygen graphviz
-
-build-no-debuggui@{{distro.name}}:{{version}}:
-  extends:
-    - .{{distro.name}}-build@template
-  variables:
-    MESON_ARGS: "-Ddebug-gui=false"
-
-build-no-debuggui-nodeps@{{distro.name}}:{{version}}:
-  extends:
-    - .{{distro.name}}-build@template
-  variables:
-    MESON_ARGS: "-Ddebug-gui=false"
-  before_script:
-    - dnf remove -y gtk3-devel gtk4-devel
-
-build-no-tests@{{distro.name}}:{{version}}:
-  extends:
-    - .{{distro.name}}-build@template
-  variables:
-    MESON_ARGS: "-Dtests=false"
-
-build-no-tests-nodeps@{{distro.name}}:{{version}}:
-  extends:
-    - .{{distro.name}}-build@template
-  variables:
-    MESON_ARGS: "-Dtests=false"
-  before_script:
-    - dnf remove -y check-devel
-
-valgrind@{{distro.name}}:{{version}}:
-  extends:
-    - .{{distro.name}}-build@template
-  variables:
-    MESON_TEST_ARGS: '--suite=valgrind --no-suite=hardware --setup=valgrind'
-
-# Python checks, only run on Fedora
-
-usr-bin-env-python@{{distro.name}}:{{version}}:
-  extends:
-    - .{{distro.name}}-build@template
-  script:
-    - |
-      if git grep -l '^#!/usr/bin/python'; then
-        echo "Use '/usr/bin/env python3' in the above files";
-        /bin/false
-      fi
-
-# A job to check we're actually running all test suites in the CI
-check-test-suites:
-  extends:
-    - .{{distro.name}}-build@template
-  script:
-    - meson setup builddir
-    - meson introspect builddir --test | jq -r '.[].name' | grep 'libinput-test-suite' | sort > meson-testsuites
-    - |
-      cat <<EOF > ci-testsuites ;
-{% for suite in test_suites %}
-{% for name in suite.suites %}
-        libinput-test-suite-{{name}}
-{% endfor %}
-{% endfor %}
-      EOF
-    - sort -o ci-testsuites ci-testsuites
-    - diff -u8 -w ci-testsuites meson-testsuites || (echo "Some test suites are not run in the CI" && false)
-  only:
-    changes:
-      - "meson.build"
-      - ".gitlab-ci.yml"
-{% endfor %}
-
-#
-# coverity run
-#
-# This requires the COVERITY_SCAN_TOKEN. Log into scan.coverity.com and get
-# the token from the respective project settings page.
-# Schedule a pipeline and set a variable COVERITY_SCAN_TOKEN with the token value.
-# https://gitlab.freedesktop.org/$CI_PROJECT_PATH/-/pipeline_schedules
-# Email from coverity will be sent to the GITLAB_USER_EMAIL that scheduled the
-# job.
-#
-# Coverity ratelimits submissions and the coverity tools download is about
-# 700M, do not run this too often.
-#
-coverity:
-  extends:
-    - .fdo.distribution-image@debian
-    - .policy
-    - .fdo-runner-tags
-  stage: build
-  variables:
-    FDO_DISTRIBUTION_VERSION: 'stable'
-    FDO_DISTRIBUTION_TAG: $DEBIAN_TAG
-    # so git-describe works, or should work
-    GIT_DEPTH: 200
-  only:
-    variables:
-      - $COVERITY_SCAN_TOKEN
-  script:
-    - curl https://scan.coverity.com/download/linux64
-        -o /tmp/cov-analysis-linux64.tgz
-        --form project=$CI_PROJECT_NAME
-        --form token=$COVERITY_SCAN_TOKEN
-    - tar xfz /tmp/cov-analysis-linux64.tgz
-    # coverity has special build options in meson, make sure we enable those
-    - meson coverity-build -Ddocumentation=false -Dcoverity=true
-    - cov-analysis-linux64-*/bin/cov-build --dir cov-int  ninja -C coverity-build
-    - tar cfz cov-int.tar.gz cov-int
-    - curl https://scan.coverity.com/builds?project=$CI_PROJECT_NAME
-        --form token=$COVERITY_SCAN_TOKEN --form email=$GITLAB_USER_EMAIL
-        --form file=@cov-int.tar.gz --form version="$(git describe --tags)"
-        --form description="$(git describe --tags) / $CI_COMMIT_TITLE / $CI_COMMIT_REF_NAME:$CI_PIPELINE_ID"
-  artifacts:
-    name: "coverity-submit-data"
-    when: always
-    expire_in: 1 week
-    paths:
-      - cov-int.tar.gz
-  needs:
-    - "debian:stable@container-prep"
-
-#################################################################
-#                                                               #
-#                        distro stage                           #
-#                                                               #
-#################################################################
-
-{% for distro in distributions %}
-{% if not distro.qemu_based %}
-{% for version in distro.versions %}
-{{distro.name}}:{{version}}@default-build:
-  stage: distro
-  extends:
-    - .build@template
-    - .fdo.distribution-image@{{distro.name}}
-  variables:
-    FDO_DISTRIBUTION_VERSION: '{{version}}'
-    FDO_DISTRIBUTION_TAG: ${{distro.name.upper()}}_TAG
-    {# Where we have extra_variables defined, add them to the list #}
-    {% if distro.build is defined and distro.build.extra_variables is defined %}
-    {% for var in distro.build.extra_variables %}
-    {{var}}
-    {% endfor %}
-    {% endif %}
-  needs:
-    - "{{distro.name}}:{{version}}@container-prep"
-
-
-{% endfor %}
-{% else %}
-{% set version = "{}".format(distro.versions|last()) %}
-{{distro.name}}:{{version}}@default-build:
-  stage: distro
-  extends:
-    - .build-in-qemu@template
-    - .fdo.distribution-image@{{distro.name}}
-  variables:
-    FDO_DISTRIBUTION_VERSION: '{{version}}'
-    FDO_DISTRIBUTION_TAG: ${{distro.name.upper()}}_TAG
-    {# Where we have extra_variables defined, add them to the list #}
-    {% if distro.build is defined and distro.build.extra_variables is defined %}
-    {% for var in distro.build.extra_variables %}
-    {{var}}
-    {% endfor %}
-    {% endif %}
-  needs:
-    - "{{distro.name}}:{{version}}@container-prep"
-
-{% endif %}
-{% endfor %}
-
-#################################################################
-#                                                               #
-#                        deploy stage                           #
-#                                                               #
-#################################################################
-
-{% for distro in distributions if distro.name == "fedora" %}
-{% set version = "{}".format(distro.versions|last()) %}
-build rpm:
-  extends:
-    - .fdo.distribution-image@fedora
-    - .policy
-    - .fdo-runner-tags
-  stage: deploy
-  variables:
-    FDO_DISTRIBUTION_VERSION: '{{version}}'
-    FDO_DISTRIBUTION_TAG: $FEDORA_TAG
-  needs:
-    - "fedora:{{version}}@container-prep"
-  script:
-    - meson "$MESON_BUILDDIR"
-    - VERSION=$(meson introspect "$MESON_BUILDDIR" --projectinfo | jq -r .version)
-    - sed -e "s/@PIPELINEID@/${CI_PIPELINE_ID}/"
-          -e "s/@GITVERSION@/${CI_COMMIT_SHA}/"
-          -e "s/@VERSION@/${VERSION}/" .gitlab-ci/libinput.spec.in > libinput.spec
-    - git config --local user.name 'gitlab CI'
-    - git config --local user.email 'noreply@nowhere'
-    - git add libinput.spec && git commit -m 'Add libinput.spec for build testing' libinput.spec
-    - cd "$MESON_BUILDDIR"
-    - meson dist --no-test
-    - rpmbuild -ta meson-dist/libinput*.tar.xz
-{% endfor %}
-
-
-wayland-web:
-  stage: deploy
-  trigger: wayland/wayland.freedesktop.org
-  variables:
-    MESON_ARGS: '-Ddocumentation=true -Ddebug-gui=false -Dlibwacom=false -Dtests=false'
-    MESON_BUILDDIR: 'builddir'
-  rules:
-    - if: '$CI_PIPELINE_SOURCE == "schedule"'
-      when: never
-    - if: '$CI_COMMIT_BRANCH == "main" && $GITLAB_USER_LOGIN != "marge-bot" && $CI_PROJECT_PATH == $FDO_UPSTREAM_REPO'
-      when: on_success
-    - when: never

.gitlab-ci/config.yml

@@ -1,217 +0,0 @@
-# This file contains the configuration for the gitlab ci.
-# See the .gitlab-ci/generate-gitlab-ci.py file for more info
-#
-
-# We're happy to rebuild all containers when one changes.
-.default_tag: &default_tag '2026-01-09.0'
-
-distributions:
-  - name: fedora
-    tag: *default_tag
-    versions:
-      - '42'
-      - '43'
-    use_for_custom_build_tests: true
-    use_for_qemu_tests: true
-    packages:
-      - git-core
-      - gcc
-      - gcc-c++
-      - pkgconf-pkg-config
-      - meson
-      - check-devel
-      - libudev-devel
-      - libevdev-devel
-      - doxygen
-      - graphviz
-      - python3-sphinx
-      - python3-recommonmark
-      - python3-sphinx_rtd_theme
-      - python3-pytest-xdist
-      - libwacom-devel
-      - cairo-devel
-      - gtk4-devel
-      - glib2-devel
-      - mtdev-devel
-      - diffutils
-      - wayland-protocols-devel
-      - black           # for the Python black job, optional
-      - clang           # for the clang-tidy build, optional
-      - clang-tools-extra  # for clang-tidy, optional
-      - jq              # for the test suite check job, optional
-      - rpmdevtools     # for the rpm build job, optional
-      - valgrind        # for the valgrind run, optional
-      # below packages are for the qemu runs, so optional
-      - systemd-udev    # for the qemu run
-      - qemu-img
-      - qemu-system-x86-core
-      - qemu-system-aarch64-core
-      - jq
-      - python3-click
-      - python3-rich
-      - virtme-ng
-      - lua-devel
-  - name: debian
-    tag: *default_tag
-    versions:
-      - 'stable'
-    packages:
-      - git
-      - gcc
-      - g++
-      - pkg-config
-      - meson
-      - check
-      - libudev-dev
-      - libevdev-dev
-      - doxygen
-      - graphviz
-      - python3-sphinx
-      - python3-recommonmark
-      - python3-sphinx-rtd-theme
-      - python3-pytest-xdist
-      - libwacom-dev
-      - libcairo2-dev
-      - libgtk-3-dev
-      - libglib2.0-dev
-      - libmtdev-dev
-      - curl            # for the coverity job
-      - lua5.4-dev
-  - name: ubuntu
-    tag: *default_tag
-    versions:
-      - '25.10'
-    packages:
-      - git
-      - gcc
-      - g++
-      - pkg-config
-      - meson
-      - check
-      - libudev-dev
-      - libevdev-dev
-      - doxygen
-      - graphviz
-      - python3-sphinx
-      - python3-recommonmark
-      - python3-sphinx-rtd-theme
-      - python3-pytest-xdist
-      - libwacom-dev
-      - libcairo2-dev
-      - libgtk-3-dev
-      - libglib2.0-dev
-      - libmtdev-dev
-      - lua5.4-dev
-  - name: arch
-    tag: *default_tag
-    versions:
-      - 'rolling'
-    packages:
-      - git
-      - gcc
-      - pkgconfig
-      - meson
-      - check
-      - libsystemd
-      - libevdev
-      - python-pytest-xdist
-      - libwacom
-      - gtk4
-      - mtdev
-      - diffutils
-      - lua
-    build:
-      extra_variables:
-        - "MESON_ARGS: '-Ddocumentation=false'" # python-recommonmark is no longer in the repos
-  - name: alpine
-    tag: *default_tag
-    versions:
-      - 'latest'
-    packages:
-      - git
-      - gcc build-base
-      - pkgconfig
-      - meson
-      - check-dev
-      - eudev-dev
-      - libevdev-dev
-      - libwacom-dev
-      - cairo-dev
-      - gtk4.0-dev
-      - mtdev-dev
-      - bash
-      - lua5.4-dev
-    build:
-      extra_variables:
-        - "MESON_ARGS: '-Ddocumentation=false' # alpine does not have python-recommonmark"
-        # We don't run the tests on alpine. The litest-selftest fails
-        # for any tcase_add_exit_test/tcase_add_test_raise_signal
-        # but someone more invested in musl will have to figure that out.
-        - "MESON_TEST_ARGS: '' # litest-selftest fails on musl"
-
-test_suites:
-  - name: touchpad
-    suites:
-      - touchpad
-  - name: touchpad_palm
-    suites:
-      - touchpad_palm
-  - name: touchpad_dwt
-    suites:
-      - touchpad_dwt
-  - name: tap
-    suites:
-      - touchpad_tap
-  - name: tap-drag
-    suites:
-      - touchpad_tap_drag
-  - name: tap-palm
-    suites:
-      - touchpad_tap_palm
-  - name: touchpad-buttons
-    suites:
-      - touchpad_buttons
-  - name: tablet
-    suites:
-      - tablet
-  - name: tablet_left_handed
-    suites:
-      - tablet_left_handed
-  - name: tablet_proximity_tip
-    suites:
-      - tablet_proximity
-      - tablet_tip
-  - name: tablet_eraser
-    suites:
-      - tablet_eraser
-  - name: gestures
-    suites:
-      - gestures
-  - name: backends
-    suites:
-      - path
-      - udev
-  - name: misc
-    suites:
-      - log
-      - misc
-      - quirks
-      - device
-  - name: other devices
-    suites:
-      - keyboard
-      - pad
-      - switch
-      - trackball
-      - trackpoint
-      - totem
-      - touch
-  - name: pointer
-    suites:
-      - pointer
-  - name: lua
-    suites:
-      - lua
-
-vng:
-  kernel: https://gitlab.freedesktop.org/api/v4/projects/libevdev%2Fhid-tools/packages/generic/kernel-x86_64/v6.14/bzImage

.gitlab-ci/libinput.spec.in

@@ -1,149 +0,0 @@
-# This specfile should not be used outside the CI
-# Its main purpose is to sound alarm if files disappear or are added that
-# weren't intended.
-
-%global udevdir %(pkg-config --variable=udevdir udev)
-
-%global pipelineid @PIPELINEID@
-%global gitversion @GITVERSION@
-
-Name:           libinput
-Version:        @VERSION@
-Release:        %{pipelineid}git%{gitversion}%{?dist}
-Summary:        Input device library
-
-License:        MIT
-URL:            http://www.freedesktop.org/wiki/Software/libinput/
-Source0:        %{name}-%{version}.tar.xz
-
-# No BuildRequires, we rely on the container setup to have
-# all the requires installed
-
-%description
-libinput is a library that handles input devices for display servers and other
-applications that need to directly deal with input devices.
-
-It provides device detection, device handling, input device event processing
-and abstraction so minimize the amount of custom input code the user of
-libinput need to provide the common set of functionality that users expect.
-
-
-%package        devel
-Summary:        Development files for %{name}
-Requires:       %{name}%{?_isa} = %{version}-%{release}
-
-%description    devel
-The %{name}-devel package contains libraries and header files for
-developing applications that use %{name}.
-
-%package        utils
-Summary:        Utilities and tools for debugging %{name}
-Requires:       %{name}%{?_isa} = %{version}-%{release}
-Requires:       python3-pyudev python3-libevdev
-
-%description    utils
-The %{name}-utils package contains tools to debug hardware and analyze
-%{name}.
-
-%package        test
-Summary:        libinput integration test suite
-Requires:       %{name}%{?_isa} = %{version}-%{release}
-
-%description    test
-The %{name}-test package contains the libinput test suite. It is not
-intended to be run by users.
-
-%prep
-%autosetup -S git -n %{name}-%{version}
-
-%build
-%meson -Dtests=true \
-       -Dinstall-tests=true \
-       -Dudev-dir=%{udevdir}
-%meson_build
-
-%install
-%meson_install
-
-%post
-%{?ldconfig}
-
-%ldconfig_postun
-
-
-%files
-%doc COPYING
-%dir %{_sysconfdir}/libinput
-%{_libdir}/libinput.so.*
-%{udevdir}/libinput-device-group
-%{udevdir}/libinput-fuzz-extract
-%{udevdir}/libinput-fuzz-to-zero
-%{udevdir}/rules.d/80-libinput-device-groups.rules
-%{udevdir}/rules.d/90-libinput-fuzz-override.rules
-%{_bindir}/libinput
-%dir %{_libexecdir}/libinput/
-%{_libexecdir}/libinput/libinput-debug-events
-%{_libexecdir}/libinput/libinput-list-devices
-%{_mandir}/man1/libinput.1*
-%{_datadir}/libinput/*.quirks
-%dir %{_datadir}/zsh
-%dir %{_datadir}/zsh/site-functions
-%{_datadir}/zsh/site-functions/*
-%{_mandir}/man1/libinput-list-devices.1*
-%{_mandir}/man1/libinput-debug-events.1*
-
-%files devel
-%{_includedir}/libinput.h
-%{_libdir}/libinput.so
-%{_libdir}/pkgconfig/libinput.pc
-
-%files utils
-%{_libexecdir}/libinput/libinput-debug-gui
-%{_libexecdir}/libinput/libinput-debug-tablet
-%{_libexecdir}/libinput/libinput-debug-tablet-pad
-%{_libexecdir}/libinput/libinput-list-kernel-devices
-%{_libexecdir}/libinput/libinput-measure
-%{_libexecdir}/libinput/libinput-measure-fuzz
-%{_libexecdir}/libinput/libinput-measure-touchpad-tap
-%{_libexecdir}/libinput/libinput-measure-touchpad-pressure
-%{_libexecdir}/libinput/libinput-measure-touch-size
-%{_libexecdir}/libinput/libinput-measure-touchpad-size
-%{_libexecdir}/libinput/libinput-quirks
-%{_libexecdir}/libinput/libinput-record
-%{_libexecdir}/libinput/libinput-replay
-%{_libexecdir}/libinput/libinput-analyze
-%{_libexecdir}/libinput/libinput-analyze-buttons
-%{_libexecdir}/libinput/libinput-analyze-per-slot-delta
-%{_libexecdir}/libinput/libinput-analyze-recording
-%{_libexecdir}/libinput/libinput-analyze-touch-down-state
-%{_mandir}/man1/libinput-debug-gui.1*
-%{_mandir}/man1/libinput-debug-tablet.1*
-%{_mandir}/man1/libinput-debug-tablet-pad.1*
-%{_mandir}/man1/libinput-list-kernel-devices.1*
-%{_mandir}/man1/libinput-measure.1*
-%{_mandir}/man1/libinput-measure-fuzz.1*
-%{_mandir}/man1/libinput-measure-touchpad-tap.1*
-%{_mandir}/man1/libinput-measure-touch-size.1*
-%{_mandir}/man1/libinput-measure-touchpad-size.1*
-%{_mandir}/man1/libinput-measure-touchpad-pressure.1*
-%{_mandir}/man1/libinput-quirks.1*
-%{_mandir}/man1/libinput-quirks-list.1*
-%{_mandir}/man1/libinput-quirks-validate.1*
-%{_mandir}/man1/libinput-record.1*
-%{_mandir}/man1/libinput-replay.1*
-%{_mandir}/man1/libinput-analyze.1*
-%{_mandir}/man1/libinput-analyze-buttons.1*
-%{_mandir}/man1/libinput-analyze-per-slot-delta.1*
-%{_mandir}/man1/libinput-analyze-recording.1*
-%{_mandir}/man1/libinput-analyze-touch-down-state.1*
-
-%files test
-%{_libexecdir}/libinput/libinput-test
-%{_libexecdir}/libinput/libinput-test-suite
-%{_libexecdir}/libinput/libinput-test-utils
-%{_mandir}/man1/libinput-test.1*
-%{_mandir}/man1/libinput-test-suite.1*
-
-%changelog
-* Wed Jul 15 2020 Peter Hutterer <peter.hutterer@redhat.com>
-- Add basic spec file for package build testing

.gitlab-ci/meson-build.sh

@@ -1,88 +0,0 @@
-#!/usr/bin/env bash
-#
-# This script is sourced from here:
-# https://gitlab.freedesktop.org/whot/meson-helper
-#
-# SPDX-License-Identifier: MIT
-
-set -x
-if [[ -f .meson_environment ]]; then
-	. .meson_environment
-fi
-
-# If test args are set, we assume we want to run the tests
-MESON_RUN_TEST="$MESON_TEST_ARGS"
-
-while [[ $# -gt 0 ]]; do
-	case $1 in
-		--skip-setup)
-			shift
-			MESON_SKIP_SETUP="1"
-			;;
-		--skip-build)
-			shift
-			MESON_SKIP_BUILD="1"
-			;;
-		--skip-test)
-			shift
-			MESON_RUN_TEST=""
-			;;
-		--run-test)
-			shift
-			MESON_RUN_TEST="1"
-			;;
-		*)
-			echo "Unknow commandline argument $1"
-			exit 1
-			;;
-	esac
-done
-
-if [[ -z "$MESON_BUILDDIR" ]]; then
-	echo "\$MESON_BUILDDIR undefined."
-	exit 1
-fi
-
-# emulate a few gitlab variables to make it easier to
-# run and debug locally.
-if [[ -z "$CI_JOB_ID" ]] || [[ -z "$CI_JOB_NAME" ]]; then
-	echo "Missing \$CI_JOB_ID or \$CI_JOB_NAME".
-	CI_PROJECT_NAME=$(basename "$PWD")
-	CI_JOB_ID=$(date +%s)
-	CI_JOB_NAME="$CI_PROJECT_NAME-job-local"
-	echo "Simulating gitlab environment: "
-	echo " CI_JOB_ID=$CI_JOB_ID"
-	echo " CI_JOB_NAME=$CI_JOB_NAME"
-fi
-
-if [[ -n "$FDO_CI_CONCURRENT" ]]; then
-	jobcount="-j$FDO_CI_CONCURRENT"
-	export MESON_TESTTHREADS="$FDO_CI_CONCURRENT"
-fi
-
-echo "*************************************************"
-echo "builddir: $MESON_BUILDDIR"
-echo "meson args: $MESON_ARGS"
-echo "ninja args: $NINJA_ARGS"
-echo "meson test args: $MESON_TEST_ARGS"
-echo "job count: ${jobcount-0}"
-echo "*************************************************"
-
-set -e
-
-if [[ -z "$MESON_SKIP_SETUP" ]]; then
-	rm -rf "$MESON_BUILDDIR"
-	meson setup "$MESON_BUILDDIR" $MESON_ARGS
-fi
-meson configure "$MESON_BUILDDIR"
-
-if [[ -z "$MESON_SKIP_BUILD" ]]; then
-	if [[ -n "$NINJA_ARGS" ]]; then
-		ninja_args="--ninja-args $NINJA_ARGS"
-	fi
-	meson compile -v -C "$MESON_BUILDDIR" $jobcount $ninja_args
-fi
-
-if [[ -n "$MESON_RUN_TEST" ]]; then
-	meson test -C "$MESON_BUILDDIR" $MESON_TEST_ARGS --print-errorlogs
-fi

.gitlab-ci/scanbuild-wrapper.sh

@@ -1,2 +0,0 @@
-#!/bin/sh
-scan-build -v --status-bugs -plist-html "$@"

.gitlab-ci/whitespace-check.py

@@ -1,119 +0,0 @@
-#!/usr/bin/env python3
-# SPDX-License-Identifier: MIT
-
-from pathlib import Path
-from dataclasses import dataclass
-
-import argparse
-import itertools
-import os
-import sys
-
-
-@dataclass
-class WhitespaceError:
-    message: str
-    lineno: int
-    nlines: int = 1
-    column: None | int = None
-    ncolumns: int = 1
-
-
-def test_duplicate_empty_lines(lines: list[str]) -> list[WhitespaceError]:
-    errors = []
-    for idx, (l1, l2) in enumerate(itertools.pairwise(lines)):
-        if not l1 and not l2:
-            errors.append(WhitespaceError("Duplicated empty lines", idx, nlines=2))
-    return errors
-
-
-def test_tab_after_space(lines: list[str]) -> list[WhitespaceError]:
-    errors = []
-    for idx, l in enumerate(lines):
-        index = l.find(" \t")
-        if index > -1:
-            errors.append(
-                WhitespaceError(
-                    "Tab after space", idx, nlines=index, column=index, ncolumns=2
-                )
-            )
-    return errors
-
-
-def test_trailing_whitespace(lines: list[str]) -> list[WhitespaceError]:
-    errors = []
-    for idx, l in enumerate(lines):
-        if l.rstrip() != l:
-            errors.append(WhitespaceError("Trailing whitespace", idx))
-    return errors
-
-
-def test_empty_line_between_braces(lines: list[str]) -> list[WhitespaceError]:
-    errors = []
-    for idx in range(len(lines) - 3):
-        l1 = lines[idx]
-        l2 = lines[idx + 1]
-        l3 = lines[idx + 2]
-        if l1.strip() == "}" and l3.strip() == "}" and l2.strip() == "":
-            errors.append(WhitespaceError("Empty line between closing braces", idx + 1))
-    return errors
-
-
-def main():
-    parser = argparse.ArgumentParser(description="Whitespace checker script")
-    parser.add_argument(
-        "files",
-        metavar="FILES",
-        type=Path,
-        nargs="+",
-        help="The files to check",
-    )
-
-    args = parser.parse_args()
-
-    have_errors: bool = False
-
-    if os.isatty(sys.stderr.fileno()):
-        red = "\x1b[0;31m"
-        reset = "\x1b[0m"
-    else:
-        red = ""
-        reset = ""
-
-    for file in args.files:
-        lines = [l.rstrip("\n") for l in file.open().readlines()]
-
-        errors = []
-        errors.extend(test_tab_after_space(lines))
-        errors.extend(test_trailing_whitespace(lines))
-        if any(file.name.endswith(suffix) for suffix in [".c", ".h"]):
-            if not file.parts[0] == "include":
-                errors.extend(test_duplicate_empty_lines(lines))
-                errors.extend(test_empty_line_between_braces(lines))
-
-        for e in errors:
-            print(f"{red}ERROR: {e.message} in {file}:{reset}", file=sys.stderr)
-            print(f"{'-' * 72}", file=sys.stderr)
-            lineno = max(0, e.lineno - 5)
-            for idx, l in enumerate(lines[lineno : lineno + 10]):
-                if e.lineno <= lineno + idx < e.lineno + e.nlines:
-                    prefix = "->"
-                    hl = red
-                    nohl = reset
-                else:
-                    prefix = "  "
-                    hl = ""
-                    nohl = ""
-                print(f"{hl}{lineno + idx:3d}: {prefix} {l.rstrip()}{nohl}")
-
-            print(f"{'-' * 72}", file=sys.stderr)
-
-        if errors:
-            have_errors = True
-
-    if have_errors:
-        sys.exit(1)
-
-
-if __name__ == "__main__":
-    main()

.gitlab/issue_templates/FeatureRequest.md

@@ -1,32 +0,0 @@
-<!--
-
-Before your file a feature request, please read
-
-https://wayland.freedesktop.org/libinput/doc/latest/what-is-libinput.html
-
-The amount of developer time libinput has available is very small.
-Requesting a feature is no guarantee that it will get implemented. Someone
-(you!) needs to step up to do the work.
-
--->
-
-## Summary
-
-<!-- Summarize the requested feature in a few sentences.  -->
-
-## Feature details
-
-<!-- A step-by-step list of what the feature should achieve (where applicable) -->
-
-## Affected Hardware
-
-<!-- Which hardware types would be affected by this -->
-
-## Implementation in Other Systems
-
-<!-- Does this feature already exist elsewhere? How does it work there? Try
-to provide as many details as possible -->
-
-
-
-/label ~enhancement ~"needs triage"

.gitlab/issue_templates/default.md

@@ -1,35 +0,0 @@
-## Summary
-
-<!--
-Summarize the bug encountered concisely. See
-https://wayland.freedesktop.org/libinput/doc/latest/reporting-bugs.html for
-detailed instructions to report bugs
--->
-
-## Steps to reproduce
-
-<!-- How to reproduce the issue on a developer machine - this is very important -->
-
-## Required information
-
-<!-- Note: if your libinput version is older than the current stable version,
-please reproduce with a current version instead -->
-
-- libinput version:
-- hardware information:
-- `libinput record` output: do not paste, **attach** the file
-- `libinput debug-events --verbose` output: do not paste, **attach the file**
-
-<!--
-
-Paste any other relevant logs - please use code blocks (```) to format
-console output, logs, and code as it's very hard to read otherwise.)
-
-Do not paste logs longer than 10 lines, **attach** those instead.
-
-If your libinput record is longer than 5-10s, we will not be able to process
-it.
-
--->
-
-/label ~"bug" ~"needs triage"

.pre-commit-config.yaml

@@ -1,31 +0,0 @@
-repos:
-- repo: https://github.com/pre-commit/pre-commit-hooks
-  rev: v5.0.0
-  hooks:
-  - id: end-of-file-fixer
-  - id: trailing-whitespace
-  - id: no-commit-to-branch
-    args: ['--branch', 'main']
-- repo: https://github.com/astral-sh/ruff-pre-commit
-  rev: v0.12.2
-  hooks:
-  - id: ruff-check
-    args: ['--ignore=E741,E501', '--extend-exclude=subprojects', '.']
-  - id: ruff-format
-    args: ['--check', '--diff']
-- repo: https://gitlab.freedesktop.org/freedesktop/ci-templates.git
-  rev: e195d80f35b45cc73668be3767b923fd76c70ed5
-  hooks:
-  - id: check-commits
-  - id: generate-template
-- repo: local
-  hooks:
-  - id: run-sed-script
-    name: Check for whitespace errors
-    entry: ./.gitlab-ci/whitespace-check.py
-    language: system
-- repo: https://github.com/pre-commit/mirrors-clang-format
-  rev: v20.1.6
-  hooks:
-  - id: clang-format
-    types_or: [c]

.triage-policies.yml

@@ -1,244 +0,0 @@
-# This is a set of bugbot commands for issues and merge requests - setting any of the
-# bugbot::foo labels will trigger gitlab-triage to run with this ruleset (well, the
-# one we have on the main branch at the time)
-#
-# Note that for adding labels, the label must first created in the project.
-
-# Re-used in issues and mrs
-.close_needinfo: &close_needinfo
-  name: "Close stale needinfo bugs"
-  conditions:
-    labels:
-      - "bugbot::needinfo-timeout"
-  actions:
-    remove_labels:
-      - "bugbot::needinfo-timeout"
-    comment: |
-      I'm closing this bug because some information we requested a while ago was never supplied and
-      we're not able to continue without this information.
-      Please feel free to re-open.
-    status: "close"
-
-.remind_needinfo: &remind_needinfo
-  name: "Remind users of needinfo bugs"
-  conditions:
-    labels:
-      - "bugbot::needinfo-reminder"
-  actions:
-    labels:
-      - "waiting on reporter"
-    remove_labels:
-      - "bugbot::needinfo-reminder"
-    comment: |
-      Hi. This is a friendly reminder that the maintainers are waiting on some information by
-      you (or maybe someone cc'd on this bug). If the information is not provided we may not
-      be able to proceed with this issue or merge request. Please check the recent comments, thanks.
-
-.help_needed: &help_needed
-  name: "Remind users help is needed"
-  conditions:
-    labels:
-      - "bugbot::help-needed"
-  actions:
-    labels:
-      - "help needed"
-    remove_labels:
-      - "bugbot::help-needed"
-    comment: |
-      Hi. This issue or merge request needs help. This simply means that for
-      the foreseeable future, the maintainers will not have time to work on
-      this.
-
-      If this is a request for a new feature, then the feature is unlikely to
-      be implemented unless you or another contributor files a merge request.
-      If a merge request already exists maybe it needs finishing which often
-      involves adding documentation or tests.
-
-      If this is an issue affecting a specific device then it is unlikely to be
-      fixed. This may be because it requires specific hardware to reproduce or
-      it may be that the use case is niche enough that the maintainers do not
-      have time to implement it.
-
-      In short, to resolve this issue or get this merge request into libinput
-      help is needed.
-
-.libinput_record: &libinput_record
-  name: "Request libinput record output"
-  conditions:
-    labels:
-      - "bugbot::libinput-record"
-  actions:
-    remove_labels:
-      - "bugbot::libinput-record"
-    comment: |
-      Looks like we may need some extra information. Please **attach** (do not paste) the full output
-      of `libinput record` and `libinput debug-events --verbose` (if you haven't yet).
-      The [documentation](https://wayland.freedesktop.org/libinput/doc/latest/tools.html#libinput-record-and-libinput-replay)
-      has some information on what we're looking for to be able to triage bugs.
-
-.hid_recorder: &hid_recorder
-  name: "Request hid-recorder output"
-  conditions:
-    labels:
-      - "bugbot::hid-recorder"
-  actions:
-    remove_labels:
-      - "bugbot::hid-recorder"
-    comment: |
-      Looks like we may need some extra information that isn't yet available in this issue.
-      Please **attach** (do not paste) the output of [`hid-recorder`](https://github.com/hidutils/hid-recorder/)
-      for this device (run `sudo hid-recorder` without argument and it will let you pick the device).
-      This should show the data the kernel receives from the device and may provide a hint on what's going on here.
-
-.udev_hid_bpf: &udev_hid_bpf
-  name: "Punt to udev-hid-bpf"
-  conditions:
-    labels:
-      - "bugbot::udev-hid-bpf"
-  actions:
-    remove_labels:
-      - "bugbot::udev-hid-bpf"
-    comment: |
-      This issue looks like it could or should be fixed with [udev-hid-bpf](https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/).
-      udev-hid-bpf is a collection of BPF programs that modify the HID Report Descriptor and/or HID Reports from the device,
-      making it possible to change the properties of a device and/or the events to make them compatible with the
-      expectations the kernel and userspace has of such devices.
-
-      Please see the [udev-hid-bpf documentation](https://libevdev.pages.freedesktop.org/udev-hid-bpf/) for details
-      and/or in particular the [udev-hid-bpf tutorial](https://libevdev.pages.freedesktop.org/udev-hid-bpf/tutorial.html)
-      if you need to enable a new device.
-    status: "close"
-
-resource_rules:
-  issues:
-    rules:
-      - name: "Close kernel bugs"
-        conditions:
-          labels:
-            - "bugbot::kernel"
-        actions:
-          labels:
-            - "kernel"
-          remove_labels:
-            - "bugbot::kernel"
-          comment: |
-            This bug looks like a kernel issue and it cannot be fixed
-            in libinput directly. I'm closing this bug but do feel free
-            to continue discussing the issue here.
-
-            Kernel bugs are usually best sent to the [`linux-input` list](https://lore.kernel.org/linux-input/).
-          status: "close"
-      - name: "Expect a merge request"
-        conditions:
-          labels:
-            - "bugbot::expect-mr"
-        actions:
-          remove_labels:
-            - "bugbot::expect-mr"
-          comment: |
-            I'm closing this bug in anticipation of a merge request that fixes this issue.
-
-            If you are a new contributor, please see
-            [the freedesktop.org wiki](https://gitlab.freedesktop.org/freedesktop/freedesktop/-/wikis/home)
-            on how to get permissions to fork a project and file a merge request.
-
-            The [libinput documentation](https://wayland.freedesktop.org/libinput/doc/latest/contributing.html)
-            also has more details on how to get started.
-          status: "close"
-      - name: "Point to 60-evdev.hwdb"
-        conditions:
-          labels:
-            - "bugbot::evdev-hwdb"
-        actions:
-          remove_labels:
-            - "bugbot::evdev-hwdb"
-          comment: |
-            Looks like this issue may be solved with a device-specific entry in systemd's hwdb.
-
-            You should have a /usr/lib/udev/hwdb.d/60-evdev.hwdb file which includes those quirks. Please see
-            the top of the file for instructions and follow those. Once the quirk is confirmed working
-            this issue (or parts thereof) should be fixed and you can submit a pull request to the
-            [systemd](https://github.com/systemd/systemd/) repository to get that quirk included.
-            Please link to the systemd issue here, thanks.
-
-            I'm closing this issue now, if the hwdb entry does not fix this issue here, please re-open.
-          status: "close"
-      - name: "Close bug for reopening"
-        conditions:
-          labels:
-            - "bugbot::close"
-        actions:
-          remove_labels:
-            - "bugbot::close"
-          comment: |
-            I'm temporarily closing this bug. The bug may not be fixed yet (see any comments above)
-            and we **want you to reopen it when/if it becomes actionable again**.
-
-            This process may feel unfamiliar but unfortunately closing/re-opening is the only action
-            all GitLab users are permitted to do. So we close it, you re-open it when whatever
-            above has been addressed and then we know we need to look at it again.
-            This issue may be closed more than once in a similar fashion but I only leave this
-            comment once since now you understand how it works. :smile:
-
-            For a detailed explanation on the how and why of this process please see
-            the [Closed Issues wiki page](https://gitlab.freedesktop.org/libinput/libinput/-/wikis/Closed-Issues).
-          status: "close"
-      - name: "Re-close bug for reopening"
-        conditions:
-          labels:
-            - "bugbot::re-close"
-        actions:
-          remove_labels:
-            - "bugbot::re-close"
-          comment: |
-            I'm temporarily closing this bug again. This is not a final close, see my comments above for the open/close process.
-          status: "close"
-      - *udev_hid_bpf
-      - *libinput_record
-      - *hid_recorder
-      - *close_needinfo
-      - *remind_needinfo
-      - *help_needed
-  merge_requests:
-    rules:
-      - name: "Remind contributor of commit rules"
-        conditions:
-          labels:
-            - "bugbot::commit-rules"
-        actions:
-          remove_labels:
-            - "bugbot::commit-rules"
-          comment: |
-            Hi. Looks like the pipeline failed because one or more of the commits in this MR do not meet our requirements.
-            Most commonly this the format of the commit message itself. The "Test summary" above has the details.
-
-            Please see [our docs for commit messages](https://wayland.freedesktop.org/libinput/doc/latest/contributing.html#commit-messages)
-            and [our docs for submitting code](https://wayland.freedesktop.org/libinput/doc/latest/contributing.html#submitting-code)
-            that explain how to amend and force-push to this repo.
-      - name: "Remind contributor that info needs to be in commit messages"
-        conditions:
-          labels:
-            - "bugbot::info-in-commit-message"
-        actions:
-          remove_labels:
-            - "bugbot::info-in-commit-message"
-          comment: |
-            Hi. Thanks for the merge request. I'm here to request that you add
-            some documentation about this merge request to the
-            **commit message** (or messages). You may have already written some
-            in the merge request description and in many cases it's fine to
-            copy/paste that into the commit message(s).
-
-            The reason is simple: once merged, no-one really looks at this this
-            page here anymore. The git log on the other hand is what developers
-            will use to understand the code so the information must be quickly
-            accessible via git.
-
-            Please see [our docs for submitting code](https://wayland.freedesktop.org/libinput/doc/latest/contributing.html#submitting-code)
-            that explain how to amend and force-push to this repo.
-      - *udev_hid_bpf
-      - *libinput_record
-      - *hid_recorder
-      - *close_needinfo
-      - *remind_needinfo
-      - *help_needed

CODING_STYLE

@@ -0,0 +1,116 @@
+- Indentation in tabs, 8 characters wide, spaces after the tabs where
+  vertical alignment is required (see below)
+
+- Max line width 80ch, do not break up printed strings though
+
+- Break up long lines at logical groupings, one line for each logical group
+
+  int a = somelongname() +
+  	  someotherlongname();
+
+  if (a < 0 &&
+      (b > 20 & d < 10) &&
+      d != 0.0)
+
+
+  somelongfunctioncall(arg1,
+  		       arg2,
+  		       arg3);
+
+- Function declarations: return type on separate line, {} on separate line,
+  arguments broken up as above.
+
+  static inline int
+  foobar(int a, int b)
+  {
+
+  }
+
+  void
+  somenamethatiswaytoolong(int a,
+  			   int b,
+  			   int c)
+  {
+  }
+
+- /* comments only */, no // comments
+
+- variable_name, not VariableName or variableName. same for functions.
+
+- no typedefs of structs, enums, unions
+
+- if it generates a compiler warning, it needs to be fixed
+- if it generates a static checker warning, it needs to be fixed or
+  commented
+
+- declare variables at the top, try to keep them as local as possible.
+  Exception: if the same variable is re-used in multiple blocks, declare it
+  at the top.
+
+  int a;
+  int c;
+
+  if (foo) {
+  	int b;
+
+  	c = get_value();
+  	usevalue(c);
+  }
+
+  if (bar) {
+  	c = get_value();
+  	useit(c);
+  }
+
+- do not mix function invocations and variable definitions.
+
+  wrong:
+
+  {
+  	  int a = foo();
+  	  int b = 7;
+  }
+
+  right:
+  {
+  	  int a;
+  	  int b = 7;
+
+  	  a = foo();
+  }
+
+  There are exceptions here, e.g. tp_libinput_context(),
+  litest_current_device()
+
+- if/else: { on the same line, no curly braces if both blocks are a single
+  statement. If either if or else block are multiple statements, both must
+  have curly braces.
+
+  if (foo) {
+  	blah();
+  	bar();
+  } else {
+  	a = 10;
+  }
+
+- public functions MUST be doxygen-commented, use doxygen's @foo rather than
+  \foo notation
+
+- include "config.h" comes first, followed by system headers, followed by
+  external library headers, followed by internal headers.
+  sort alphabetically where it makes sense (specifically system headers)
+
+  #include "config.h"
+
+  #include <stdio.h>
+  #include <string.h>
+
+  #include <libevdev/libevdev.h>
+
+  #include "libinput-private.h"
+
+- goto jumps only to the end of the function, and only for good reasons
+  (usually cleanup). goto never jumps backwards
+
+- Use stdbool.h's bool for booleans within the library (instead of 'int').
+  Exception: the public API uses int, not bool.

CODING_STYLE.md

@@ -1,244 +0,0 @@
-# Coding style
-
-- Indentation in tabs, 8 characters wide, spaces after the tabs where
-  vertical alignment is required (see below)
-
-**Note: this file uses spaces due to markdown rendering issues for tabs.
-  Code must be implemented using tabs.**
-
-- Max line width 80ch, do not break up printed strings though
-
-- Break up long lines at logical groupings, one line for each logical group
-
-```c
-int a = somelongname() +
-        someotherlongname();
-
-if (a < 0 &&
-    (b > 20 & d < 10) &&
-    d != 0.0)
-
-
-somelongfunctioncall(arg1,
-                     arg2,
-                     arg3);
-```
-
-- Function declarations: return type on separate line, {} on separate line,
-  arguments broken up as above.
-
-```c
-static inline int
-foobar(int a, int b)
-{
-
-}
-
-void
-somenamethatiswaytoolong(int a,
-                         int b,
-                         int c)
-{
-}
-```
-
-- `/* comments only */`, no `// comments`
-
-- `variable_name`, not `VariableName` or `variableName`. same for functions.
-
-- no typedefs of structs, enums, unions
-
-- if it generates a compiler warning, it needs to be fixed
-- if it generates a static checker warning, it needs to be fixed or
-  commented
-
-- declare variables when they are used first and try to keep them as local as possible.
-  Exception: basic loop variables, e.g. for (int i = 0; ...) should always be
-  declared inside the loop even where multiple loops exist
-
-```c
-int a;
-
-if (foo) {
-        int b = 10;
-
-        a = get_value();
-        usevalue(a, b);
-}
-
-if (bar) {
-        a = get_value();
-        useit(a);
-}
-
-int c = a * 100;
-useit(c);
-```
-
-- avoid uninitialized variables where possible, declare them late instead.
-  Note that most of libinput predates this style, try to stick with the code
-  around you if in doubt.
-
-  wrong:
-
-```c
-        int *a;
-        int b = 7;
-
-        ... some code ...
-
-        a = zalloc(32);
-```
-
-  right:
-
-```c
-        int b = 7;
-        ... some code ...
-
-        int *a = zalloc(32);
-```
-
-- avoid calling non-obvious functions inside declaration blocks for multiple
-  variables.
-
-  bad:
-
-```c
-{
-        int a = 7;
-        int b = some_complicated_function();
-        int *c = zalloc(32);
-}
-```
-
-  better:
-```c
-{
-        int a = 7;
-        int *c = zalloc(32);
-
-        int b = some_complicated_function();
-}
-```
-
-  There is a bit of gut-feeling involved with this, but the goal is to make
-  the variable values immediately recognizable.
-
-- Where statements are near-identical and repeated, try to keep them
-  identical:
-
-  bad:
-```c
-int a = get_some_value(x++);
-do_something(a);
-a = get_some_value(x++);
-do_something(a);
-a = get_some_value(x++);
-do_something(a);
-```
-  better:
-
-```c
-int a;
-a = = get_some_value(x++);
-do_something(a);
-a = get_some_value(x++);
-do_something(a);
-a = get_some_value(x++);
-do_something(a);
-```
-
-- if/else: { on the same line, no curly braces if both blocks are a single
-  statement. If either if or else block are multiple statements, both must
-  have curly braces.
-
-```c
-if (foo) {
-        blah();
-        bar();
-} else {
-        a = 10;
-}
-```
-
-- public functions MUST be doxygen-commented, use doxygen's `@foo` rather than
-  `\foo` notation
-
-- `#include "config.h"` comes first, followed by system headers, followed by
-  external library headers, followed by internal headers.
-  sort alphabetically where it makes sense (specifically system headers)
-
-```c
-#include "config.h"
-
-#include <stdio.h>
-#include <string.h>
-
-#include <libevdev/libevdev.h>
-
-#include "libinput-private.h"
-```
-
-- goto jumps only to the end of the function, and only for good reasons
-  (usually cleanup). goto never jumps backwards
-
-- Use stdbool.h's bool for booleans within the library (instead of `int`).
-  Exception: the public API uses int, not bool.
-
-# Git commit message requirements
-
-Our CI will check the commit messages for a few requirements. Below is the
-list of what we expect from a git commit.
-
-## Commit message content
-
-A [good commit message](http://who-t.blogspot.com/2009/12/on-commit-messages.html) needs to
-answer three questions:
-
-- Why is it necessary? It may fix a bug, it may add a feature, it may
-  improve performance, reliabilty, stability, or just be a change for the
-  sake of correctness.
-- How does it address the issue? For short obvious patches this part can be
-  omitted, but it should be a high level description of what the approach
-  was.
-- What effects does the patch have? (In addition to the obvious ones, this
-  may include benchmarks, side effects, etc.)
-
-These three questions establish the context for the actual code changes, put
-reviewers and others into the frame of mind to look at the diff and check if
-the approach chosen was correct. A good commit message also helps
-maintainers to decide if a given patch is suitable for stable branches or
-inclusion in a distribution.
-
-## Commit message format
-
-The canonical git commit message format is:
-
-```
-one line as the subject line with a high-level note
-
-full explanation of the patch follows after an empty line. This explanation
-can be multiple paragraphs and is largely free-form. Markdown is not
-supported.
-
-You can include extra data where required like:
-- benchmark one says 10s
-- benchmark two says 12s
-```
-
-The subject line is the first thing everyone sees about this commit, so make
-sure it's on point.
-
-## Commit message technical requirements
-
-- The commit message should use present tense (not past tense). Do write
-  "change foo to bar", not "changed foo to bar".
-- The text width of the commit should be 78 chars or less, especially the
-  subject line.
-- The author must be the name you usually identify as and email address. We do
-  not accept the default `@users.noreply` gitlab addresses.
-  ```
-  git config --global user.name Your Name
-  git config --global user.email your@email
-  ```

CONTRIBUTING.md

@@ -1,4 +0,0 @@
-Thank you for your interest in contributing to libinput.
-
-Please find more information about how to contribute in
-[the documentation](https://wayland.freedesktop.org/libinput/doc/latest/contributing.html).

COPYING

@@ -31,4 +31,4 @@ This copy is provided to provide consistent behavior regardless which kernel
 version libinput is compiled against. The header is used during compilation
 only, libinput does not link against GPL libraries.
 
-[1] https://gitlab.freedesktop.org/libinput/libinput/blob/main/include/linux/input.h
+[1] http://cgit.freedesktop.org/wayland/libinput/tree/include/linux/input.h

Makefile.am

@@ -0,0 +1,6 @@
+SUBDIRS = src doc test tools udev
+
+ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS}
+
+valgrind:
+	(cd test; $(MAKE) valgrind)

README.md

@@ -1,84 +0,0 @@
-libinput
-========
-
-libinput is a library that provides a full input stack for display servers
-and other applications that need to handle input devices provided by the
-kernel.
-
-libinput provides device detection, event handling and abstraction to
-minimize the amount of custom input code the user of libinput needs to
-provide the common set of functionality that users expect. Input event
-processing includes scaling touch coordinates, generating
-relative pointer events from touchpads, pointer acceleration, etc.
-
-User documentation
-------------------
-
-Documentation explaining features available in libinput is available
-[here](https://wayland.freedesktop.org/libinput/doc/latest/features.html).
-
-This includes the [FAQ](https://wayland.freedesktop.org/libinput/doc/latest/faqs.html)
-and the instructions on
-[reporting bugs](https://wayland.freedesktop.org/libinput/doc/latest/reporting-bugs.html).
-
-
-Source code
------------
-
-The source code of libinput can be found at:
-https://gitlab.freedesktop.org/libinput/libinput
-
-For a list of current and past releases visit:
-https://www.freedesktop.org/wiki/Software/libinput/
-
-Build instructions:
-https://wayland.freedesktop.org/libinput/doc/latest/building.html
-
-Reporting Bugs
---------------
-
-Bugs can be filed on freedesktop.org GitLab:
-https://gitlab.freedesktop.org/libinput/libinput/issues/
-
-Where possible, please provide the `libinput record` output
-of the input device and/or the event sequence in question.
-
-See https://wayland.freedesktop.org/libinput/doc/latest/reporting-bugs.html
-for more info.
-
-Documentation
--------------
-
-- Developer API documentation: https://wayland.freedesktop.org/libinput/doc/latest/development.html
-- High-level documentation about libinput's features:
-  https://wayland.freedesktop.org/libinput/doc/latest/features.html
-- Build instructions:
-  https://wayland.freedesktop.org/libinput/doc/latest/building.html
-- Documentation for previous versions of libinput: https://wayland.freedesktop.org/libinput/doc/
-
-Examples of how to use libinput are the debugging tools in the libinput
-repository. Developers are encouraged to look at those tools for a
-real-world (yet simple) example on how to use libinput.
-
-- A commandline debugging tool: https://gitlab.freedesktop.org/libinput/libinput/tree/main/tools/libinput-debug-events.c
-- A GTK application that draws cursor/touch/tablet positions: https://gitlab.freedesktop.org/libinput/libinput/tree/main/tools/libinput-debug-gui.c
-
-License
--------
-
-libinput is licensed under the MIT license.
-
-> Permission is hereby granted, free of charge, to any person obtaining a
-> copy of this software and associated documentation files (the "Software"),
-> to deal in the Software without restriction, including without limitation
-> the rights to use, copy, modify, merge, publish, distribute, sublicense,
-> and/or sell copies of the Software, and to permit persons to whom the
-> Software is furnished to do so, subject to the following conditions: [...]
-
-See the [COPYING](https://gitlab.freedesktop.org/libinput/libinput/tree/main/COPYING)
-file for the full license information.
-
-About
------
-
-Documentation generated from git commit [__GIT_VERSION__](https://gitlab.freedesktop.org/libinput/libinput/commit/__GIT_VERSION__)

README.txt

@@ -0,0 +1,85 @@
+/*!@mainpage
+
+libinput
+========
+
+libinput is a library that handles input devices for display servers and other
+applications that need to directly deal with input devices.
+
+It provides device detection, device handling, input device event processing
+and abstraction so minimize the amount of custom input code the user of
+libinput need to provide the common set of functionality that users expect.
+Input event processing includes scaling touch coordinates, generating
+pointer events from touchpads, pointer acceleration, etc.
+
+libinput originates from
+[weston](http://cgit.freedesktop.org/wayland/weston/), the Wayland reference
+compositor.
+
+Architecture
+------------
+
+libinput is not used directly by applications, rather it is used by the
+xf86-input-libinput X.Org driver or wayland compositors. The typical
+software stack for a system running Wayland is:
+
+@dotfile libinput-stack-wayland.gv
+
+Where the Wayland compositor may be Weston, mutter, KWin, etc. Note that
+Wayland encourages the use of toolkits, so the Wayland client (your
+application) does not usually talk directly to the compositor but rather
+employs a toolkit (e.g. GTK) to do so.
+
+The simplified software stack for a system running X.Org is:
+
+@dotfile libinput-stack-xorg.gv
+
+Again, on a modern system the application does not usually talk directly to
+the X server using Xlib but rather employs a toolkit to do so.
+
+Source code
+-----------
+
+The source code of libinput can be found at:
+http://cgit.freedesktop.org/wayland/libinput
+
+For a list of current and past releases visit:
+http://www.freedesktop.org/wiki/Software/libinput/
+
+Reporting Bugs
+--------------
+
+Bugs can be filed in the libinput component of Wayland:
+https://bugs.freedesktop.org/enter_bug.cgi?product=Wayland&component=libinput
+
+Where possible, please provide an
+[evemu](http://www.freedesktop.org/wiki/Evemu/) recording of the input
+device and/or the event sequence in question.
+
+See @ref reporting_bugs for more info.
+
+Documentation
+-------------
+
+Developer API documentation:
+http://wayland.freedesktop.org/libinput/doc/latest/modules.html
+
+High-level documentation about libinput's features:
+http://wayland.freedesktop.org/libinput/doc/latest/pages.html
+
+License
+-------
+
+libinput is licensed under the MIT license.
+
+> Permission is hereby granted, free of charge, to any person obtaining a
+> copy of this software and associated documentation files (the "Software"),
+> to deal in the Software without restriction, including without limitation
+> the rights to use, copy, modify, merge, publish, distribute, sublicense,
+> and/or sell copies of the Software, and to permit persons to whom the
+> Software is furnished to do so, subject to the following conditions: [...]
+
+See the [COPYING](http://cgit.freedesktop.org/wayland/libinput/tree/COPYING)
+file for the full license information.
+
+*/

autogen.sh

@@ -0,0 +1,9 @@
+#!/bin/sh
+
+test -n "$srcdir" || srcdir=`dirname "$0"`
+test -n "$srcdir" || srcdir=.
+(
+  cd "$srcdir" &&
+  autoreconf --force -v --install
+) || exit
+test -n "$NOCONFIGURE" || "$srcdir/configure" "$@"

completion/zsh/_libinput

@@ -1,282 +0,0 @@
-#compdef libinput
-
-(( $+functions[_libinput_commands] )) || _libinput_commands()
-{
-	local -a commands
-	commands=(
-		"list-devices:List all devices recognized by libinput"
-		"debug-events:Print all events as seen by libinput"
-		"debug-gui:Show a GUI to visualize libinput's events"
-		"debug-tablet:Show tablet axis and button values"
-		"measure:Measure various properties of devices"
-		"analyze:Analyze device data"
-		"record:Record the events from a device"
-		"replay:Replay the events from a device"
-	)
-
-	_describe -t commands 'command' commands
-}
-
-__all_seats()
-{
-	# Obviously only works with logind
-	local -a seats
-	seats=${(f)"$(loginctl --no-legend --no-pager list-seats 2>/dev/null)"}
-	if [[ -z $seats ]]; then
-		# Can always offer seat0, even if we can't enumerate the seats
-		compadd "$@" - seat0
-	else
-		compadd "$@" - $seats
-	fi
-}
-
-(( $+functions[_libinput_list-devices] )) || _libinput_list-devices()
-{
-	_arguments \
-		'--help[Show help and exit]' \
-		'--version[show version information and exit]'
-}
-
-(( $+functions[_libinput_debug-events] )) || _libinput_debug-events()
-{
-	_arguments \
-		'--help[Show debug-events help and exit]' \
-		'--quiet[Only print libinput messages and nothing from this tool]' \
-		'--verbose[Use verbose output]' \
-		'--show-keycodes[Make all keycodes visible]' \
-		'--grab[Exclusively grab all opened devices]' \
-		'--compress-motion-events[Compress repeated motion events on a TTY]' \
-		'--device=[Use the given device with the path backend]:device:_files -W /dev/input/ -P /dev/input/' \
-		'--udev=[Listen for notifications on the given seat]:seat:__all_seats' \
-		'--apply-to=[Apply configuration options where the device name matches the pattern]:pattern' \
-		'--disable-sendevents=[Disable send-events option for the devices matching the pattern]:pattern' \
-		'--set-area=[Set the desired area as "x1/y1 x2/y2" (within \[0.0, 1.0\]) ]' \
-		'--set-calibration=[Set the first 6 elements of the 3x3 calibration matrix ("1.0 0.0 0.0 0.0 1.0 0.0")]' \
-		'--set-click-method=[Set the desired click method]:click-method:(none clickfinger buttonareas)' \
-		'--set-clickfinger-map=[Set button mapping for clickfinger]:tap-map:((  \
-			lrm\:2-fingers\ right-click\ /\ 3-fingers\ middle-click \
-			lmr\:2-fingers\ middle-click\ /\ 3-fingers\ right-click \
-		))' \
-		'--set-eraser-button-button=[Set button mapping for the eraser button]:eraser-button:(BTN_STYLUS BTN_STYLUS2 BTN_STYLUS3)' \
-		'--set-eraser-button-mode=[Set the eraser button mode]:eraser-mode:(default button)' \
-		'--set-pressure-range=[Set the tablet tool pressure range (within range \[0.0, 1.0\])]' \
-		'--set-profile=[Set pointer acceleration profile]:accel-profile:(adaptive flat custom)' \
-		'--set-rotation-angle=[Set the rotation angle in degrees]' \
-		'--set-scroll-button=[Set the button to the given button code]' \
-		'--set-scroll-method=[Set the desired scroll method]:scroll-method:(none twofinger edge button)' \
-		'--set-speed=[Set pointer acceleration speed (within range \[-1, 1\])]' \
-		'--set-tap-map=[Set button mapping for tapping]:tap-map:((  \
-			lrm\:2-fingers\ right-click\ /\ 3-fingers\ middle-click \
-			lmr\:2-fingers\ middle-click\ /\ 3-fingers\ right-click \
-		))' \
-		+ '(custom pointer acceleration)' \
-		'--set-custom-points=[Set n points defining a custom acceleration function]' \
-		'--set-custom-step=[Set the distance along the x axis between the custom points]' \
-		'--set-custom-type=[Set the type of the acceleration function]:custom-type:(fallback motion scroll)' \
-		+ '(drag)' \
-		'--enable-drag[Enable tap-and-drag]' \
-		'--disable-drag[Disable tap-and-drag]' \
-		+ '(drag-lock)' \
-		'--enable-drag-lock[Enable drag-lock]' \
-		'--disable-drag-lock[Disable drag-lock]' \
-		+ '(dwt)' \
-		'--enable-dwt[Enable disable-while-typing]' \
-		'--disable-dwt[Disable disable-while-typing]' \
-		+ '(dwtp)' \
-		'--enable-dwtp[Enable disable-while-trackpointing]' \
-		'--disable-dwtp[Disable disable-while-trackpointing]' \
-		+ '(left-handed)' \
-		'--enable-left-handed[Enable left handed button configuration]' \
-		'--disable-left-handed[Disable left handed button configuration]' \
-		+ '(middlebutton)' \
-		'--enable-middlebutton[Enable middle button emulation]' \
-		'--disable-middlebutton[Disable middle button emulation]' \
-		+ '(natural-scrolling)' \
-		'--enable-natural-scrolling[Enable natural scrolling]' \
-		'--disable-natural-scrolling[Disable natural scrolling]' \
-		+ '(plugins)' \
-		'--enable-plugins[Enable plugins]' \
-		'--disable-plugins[Disable plugins]' \
-		+ '(tap-to-click)' \
-		'--enable-tap[Enable tap-to-click]' \
-		'--disable-tap[Disable tap-to-click]'
-}
-
-(( $+functions[_libinput_debug-gui] )) || _libinput_debug-gui()
-{
-	_arguments \
-		'--help[Show debug-gui help and exit]' \
-		'--verbose[Use verbose output]' \
-		'--grab[Exclusively grab all opened devices]' \
-		'--device=[Use the given device with the path backend]:device:_files -W /dev/input/ -P /dev/input/' \
-		'--udev=[Listen for notifications on the given seat]:seat:_libinput_all_seats'
-}
-
-(( $+functions[_libinput_debug-tablet] )) || _libinput_debug-tablet()
-{
-	_arguments \
-		'--help[Show debug-tablet help and exit]' \
-		'--device=[Use the given device with the path backend]:device:_files -W /dev/input/ -P /dev/input/' \
-		'--udev=[Use the first tablet device on the given seat]:seat:_libinput_all_seats'
-}
-
-
-(( $+functions[_libinput_measure] )) || _libinput_measure()
-{
-	local curcontext=$curcontext state line ret=1
-	local features
-	features=(
-		"fuzz:Measure touch fuzz to avoid pointer jitter"
-		"touch-size:Measure touch size and orientation"
-		"touchpad-tap:Measure tap-to-click time"
-		"touchpad-pressure:Measure touch pressure"
-	)
-
-	_arguments -C \
-		'--help[Print help and exit]' \
-		':feature:->feature' \
-		'*:: :->option-or-argument'
-
-	case $state in
-		(feature)
-			_describe -t features 'feature' features
-			;;
-		(option-or-argument)
-			curcontext=${curcontext%:*:*}:libinput-measure-$words[1]:
-			if ! _call_function ret _libinput_measure_$words[1]; then
-				_message "unknown feature: $words[1]"
-			fi
-			;;
-	esac
-	return ret
-}
-
-(( $+functions[_libinput_measure_fuzz] )) || _libinput_measure_fuzz()
-{
-	_arguments \
-		'--help[Show help message and exit]' \
-		':device:_files -W /dev/input/ -P /dev/input/'
-}
-
-(( $+functions[_libinput_measure_touch-size] )) || _libinput_measure_touch-size()
-{
-	_arguments \
-		'--help[Show help message and exit]' \
-		'--touch-threshold=[Assume a touch pressure threshold of "down:up"]' \
-		'--palm-threshold=[Assume a palm threshold of N]' \
-		':device:_files -W /dev/input/ -P /dev/input/'
-}
-
-(( $+functions[_libinput_measure_touchpad-pressure] )) || _libinput_measure_touchpad-pressure()
-{
-	_arguments \
-		'--help[Show help message and exit]' \
-		'--touch-threshold=[Assume a touch pressure threshold of "down:up"]' \
-		'--palm-threshold=[Assume a palm threshold of N]' \
-		':device:_files -W /dev/input/ -P /dev/input/'
-}
-
-(( $+functions[_libinput_measure_touchpad-tap] )) || _libinput_measure_touchpad-tap()
-{
-	_arguments \
-		'--help[Show help message and exit]' \
-		'--format=dat[Specify the data format to be printed. The default is "summary"]' \
-		':device:_files -W /dev/input/ -P /dev/input/'
-}
-
-(( $+functions[_libinput_analyze_per-slot-delta] )) || _libinput_analyze_per-slot-delta()
-{
-	_arguments \
-		'--help[Show help message and exit]' \
-		':recording:_files'
-}
-
-(( $+functions[_libinput_analyze_touch-down-state] )) || _libinput_analyze_touch-down-state()
-{
-	_arguments \
-		'--help[Show help message and exit]' \
-		':recording:_files'
-}
-
-(( $+functions[_libinput_analyze_recording] )) || _libinput_analyze_recording()
-{
-	_arguments \
-		'--help[Show help message and exit]' \
-		':recording:_files'
-}
-
-(( $+functions[_libinput_analyze] )) || _libinput_analyze()
-{
-	local curcontext=$curcontext state line ret=1
-	local features
-	features=(
-		"per-slot-delta:analyze relative movement per touch per slot"
-		"recording:analyze a recording by printing a pretty table"
-		"touch-down-state:analyze a recording for logical touch down states"
-	)
-
-	_arguments -C \
-		'--help[Print help and exit]' \
-		':feature:->feature' \
-		'*:: :->option-or-argument'
-
-	case $state in
-		(feature)
-			_describe -t features 'feature' features
-			;;
-		(option-or-argument)
-			curcontext=${curcontext%:*:*}:libinput-analyze-$words[1]:
-			if ! _call_function ret _libinput_analyze_$words[1]; then
-				_message "unknown feature: $words[1]"
-			fi
-			;;
-	esac
-	return ret
-}
-
-(( $+functions[_libinput_record] )) || _libinput_record()
-{
-	_arguments \
-		'--help[Show help message and exit]' \
-		'--all[Record all /dev/input/event* devices available on the system]' \
-		'--autorestart=[Terminate the current recording after s seconds of device inactivity]' \
-		{-o+,--output=}'[Specify the output file to use]:file:_files -g "*.yml"' \
-		'--multiple[Record multiple devices at once]' \
-		'--show-keycodes[Show keycodes as-is in the recording]' \
-		'--with-libinput[Record libinput events alongside device events]' \
-		'--with-hidraw[Record hidraw events alongside device events]' \
-		'*::device:_files -W /dev/input/ -P /dev/input/'
-}
-
-(( $+functions[_libinput_replay] )) || _libinput_replay()
-{
-	_arguments \
-		'--help[Show help message and exit]' \
-		':recording:_files'
-}
-
-_libinput()
-{
-	local curcontext=$curcontext state line ret=1
-
-	_arguments -C \
-		{-h,--help}'[Show help message and exit]' \
-		'--version[Show version information and exit]' \
-		':command:->command' \
-		'*:: :->option-or-argument' && return
-
-	case $state in
-		(command)
-			_libinput_commands && ret=0
-			;;
-		(option-or-argument)
-			curcontext=${curcontext%:*:*}:libinput-$words[1]:
-			if ! _call_function ret _libinput_$words[1]; then
-				_message "unknown libinput command: $words[1]"
-			fi
-			;;
-	esac
-	return ret
-}
-
-_libinput

completion/zsh/meson.build

@@ -1,12 +0,0 @@
-zshcompletiondir = get_option('zshcompletiondir')
-if zshcompletiondir == ''
-		zshcompletiondir = get_option('datadir') / 'zsh' / 'site-functions'
-endif
-
-if zshcompletiondir != 'no'
-	install_data(
-		'_libinput',
-		install_dir: zshcompletiondir,
-		install_mode: 'rw-r--r--',
-	)
-endif

configure.ac

@@ -0,0 +1,226 @@
+AC_PREREQ([2.64])
+
+m4_define([libinput_major_version], [1])
+m4_define([libinput_minor_version], [0])
+m4_define([libinput_micro_version], [0])
+m4_define([libinput_version],
+          [libinput_major_version.libinput_minor_version.libinput_micro_version])
+
+AC_INIT([libinput],
+        [libinput_version],
+        [https://bugs.freedesktop.org/enter_bug.cgi?product=Wayland&component=libinput&version=libinput_version],
+        [libinput],
+        [http://www.freedesktop.org/wiki/Software/libinput/])
+
+AC_SUBST([LIBINPUT_VERSION_MAJOR], [libinput_major_version])
+AC_SUBST([LIBINPUT_VERSION_MINOR], [libinput_minor_version])
+AC_SUBST([LIBINPUT_VERSION_MICRO], [libinput_micro_version])
+AC_SUBST([LIBINPUT_VERSION], [libinput_version])
+
+AC_CONFIG_HEADERS([config.h])
+AC_CONFIG_MACRO_DIR([m4])
+
+AM_INIT_AUTOMAKE([1.11 foreign no-dist-gzip dist-xz])
+
+# Before making a release, the LIBINPUT_LT_VERSION string should be
+# modified.
+# The string is of the form C:R:A.
+# a) If binary compatibility has been broken (eg removed or changed interfaces)
+#    change to C+1:0:0. DO NOT DO THIS! Use symbol versioning instead and
+#    do b) instead.
+# b) If interfaces have been changed or added, but binary compatibility has
+#    been preserved, change to C+1:0:A+1
+# c) If the interface is the same as the previous version, change to C:R+1:A
+LIBINPUT_LT_VERSION=15:2:5
+AC_SUBST(LIBINPUT_LT_VERSION)
+
+AM_SILENT_RULES([yes])
+AC_USE_SYSTEM_EXTENSIONS
+
+# Check for programs
+AC_PROG_CC_C99
+AC_PROG_CXX # Only used by build C++ test
+AC_PROG_GREP
+
+# Initialize libtool
+LT_PREREQ([2.2])
+LT_INIT
+
+AC_CHECK_DECL(EPOLL_CLOEXEC, [],
+	      [AC_MSG_ERROR("EPOLL_CLOEXEC is needed to compile libinput")],
+	      [[#include <sys/epoll.h>]])
+AC_CHECK_DECL(TFD_CLOEXEC,[],
+	      [AC_MSG_ERROR("TFD_CLOEXEC is needed to compile libinput")],
+	      [[#include <sys/timerfd.h>]])
+AC_CHECK_DECL(CLOCK_MONOTONIC,[],
+	      [AC_MSG_ERROR("CLOCK_MONOTONIC is needed to compile libinput")],
+	      [[#include <time.h>]])
+
+PKG_PROG_PKG_CONFIG()
+PKG_CHECK_MODULES(MTDEV, [mtdev >= 1.1.0])
+PKG_CHECK_MODULES(LIBUDEV, [libudev])
+PKG_CHECK_MODULES(LIBEVDEV, [libevdev >= 0.4])
+
+AC_ARG_WITH(libunwind,
+            AS_HELP_STRING([--without-libunwind],[Do not use libunwind]))
+
+AS_IF([test "x$with_libunwind" != "xno"],
+	[PKG_CHECK_MODULES(LIBUNWIND,
+		  [libunwind],
+		  [HAVE_LIBUNWIND=yes],
+		  [HAVE_LIBUNWIND=no])],
+	[HAVE_LIBUNWIND=no])
+
+AS_IF([test "x$HAVE_LIBUNWIND" = "xyes"],
+	[AC_DEFINE(HAVE_LIBUNWIND, 1, [Have libunwind support])],
+	[AS_IF([test "x$with_libunwind" = "xyes"],
+		[AC_MSG_ERROR([libunwind requested but not found])])])
+
+AM_CONDITIONAL(HAVE_LIBUNWIND, [test "x$HAVE_LIBUNWIND" = xyes])
+AC_PATH_PROG(ADDR2LINE, [addr2line])
+if test "x$ADDR2LINE" != "x"; then
+	AC_DEFINE_UNQUOTED(HAVE_ADDR2LINE, 1, [addr2line found])
+	AC_DEFINE_UNQUOTED(ADDR2LINE, ["$ADDR2LINE"], [Path to addr2line])
+fi
+
+AC_CHECK_LIB([m], [atan2])
+AC_CHECK_LIB([rt], [clock_gettime])
+
+if test "x$GCC" = "xyes"; then
+	GCC_CXXFLAGS="-Wall -Wextra -Wno-unused-parameter -g -fvisibility=hidden"
+	GCC_CFLAGS="$GCC_CXXFLAGS -Wmissing-prototypes -Wstrict-prototypes"
+fi
+AC_SUBST(GCC_CFLAGS)
+AC_SUBST(GCC_CXXFLAGS)
+
+udev_dir_default="$libdir/udev"
+AC_ARG_WITH(udev-dir,
+            AS_HELP_STRING([--with-udev-dir=DIR],
+                           [udev base directory [[default=$udev_dir_default]]]),
+            [],
+            [with_udev_dir="yes"])
+AS_CASE($with_udev_dir,
+	[no|""], [AC_MSG_ERROR([You must define a udev base directory])],
+	[yes], [udevdir="$udev_dir_default"],
+	[udevdir="$with_udev_dir"])
+UDEV_DIR=${udevdir}
+AC_SUBST(UDEV_DIR)
+
+AC_ARG_ENABLE([documentation],
+	      [AC_HELP_STRING([--enable-documentation],
+		              [Enable building the documentation (default=auto)])],
+	      [build_documentation="$enableval"],
+	      [build_documentation="auto"])
+
+if test "x$build_documentation" = "xyes" -o "x$build_documentation" = "xauto"; then
+	AC_PATH_PROG(DOXYGEN, doxygen)
+	if test "x$DOXYGEN" = "x"; then
+		if test "x$build_documentation" = "xyes"; then
+			AC_MSG_ERROR([Documentation build requested but doxygen not found. Install doxygen or disable the documentation using --disable-documentation])
+		fi
+	else
+		AC_MSG_CHECKING([for compatible doxygen version])
+		doxygen_version=`$DOXYGEN --version`
+		AS_VERSION_COMPARE([$doxygen_version], [1.6.0],
+		                   [AC_MSG_RESULT([no])
+		                    DOXYGEN=""],
+		                   [AC_MSG_RESULT([yes])],
+		                   [AC_MSG_RESULT([yes])])
+		if test "x$DOXYGEN" = "x" -a "x$build_documentation" = "xyes"; then
+			AC_MSG_ERROR([Doxygen $doxygen_version too old. Doxygen 1.6+ required for documentation build. Install required doxygen version or disable the documentation using --disable-documentation])
+		fi
+	fi
+
+	AC_PATH_PROG(DOT, dot)
+	if test "x$DOT" = "x"; then
+		if test "x$build_documentation" = "xyes"; then
+			AC_MSG_ERROR([Documentation build requested but graphviz's dot not found. Install graphviz or disable the documentation using --disable-documentation])
+		fi
+	else
+		AC_MSG_CHECKING([for compatible dot version])
+		dot_version=`$DOT -V 2>&1|$GREP -oP '(?<=version\W)@<:@0-9.@:>@*(?=\W(.*))'`
+		AS_VERSION_COMPARE([$dot_version], [2.26.0],
+		                   [AC_MSG_RESULT([no])
+		                    DOT=""],
+		                   [AC_MSG_RESULT([yes])],
+		                   [AC_MSG_RESULT([yes])])
+		if test "x$DOT" = "x" -a "x$build_documentation" = "xyes"; then
+			AC_MSG_ERROR([Graphviz dot $dot_version too old. Graphviz 2.26+ required for documentation build. Install required graphviz version or disable the documentation using --disable-documentation])
+		fi
+	fi
+
+	if test "x$DOXYGEN" != "x" -a "x$DOT" != "x"; then
+		build_documentation="yes"
+	else
+		build_documentation="no"
+	fi
+fi
+
+AC_ARG_ENABLE(event-gui,
+	      AS_HELP_STRING([--enable-event-gui], [Build the GUI event viewer (default=auto)]),
+	      [build_eventgui="$enableval"],
+	      [build_eventgui="auto"])
+PKG_CHECK_EXISTS([cairo glib-2.0 gtk+-3.0], [HAVE_GUILIBS="yes"], [HAVE_GUILIBS="no"])
+
+if test "x$build_eventgui" = "xauto"; then
+	build_eventgui="$HAVE_GUILIBS"
+fi
+if test "x$build_eventgui" = "xyes"; then
+	PKG_CHECK_MODULES(CAIRO, [cairo])
+	PKG_CHECK_MODULES(GTK, [glib-2.0 gtk+-3.0])
+fi
+AM_CONDITIONAL(BUILD_EVENTGUI, [test "x$build_eventgui" = "xyes"])
+
+AC_ARG_ENABLE(tests,
+	      AS_HELP_STRING([--enable-tests], [Build the tests (default=auto)]),
+	      [build_tests="$enableval"],
+	      [build_tests="auto"])
+
+PKG_CHECK_MODULES(CHECK, [check >= 0.9.10], [HAVE_CHECK="yes"], [HAVE_CHECK="no"])
+
+if test "x$build_tests" = "xauto"; then
+	build_tests="$HAVE_CHECK"
+fi
+if test "x$build_tests" = "xyes"; then
+	if test "x$HAVE_CHECK" = "xno"; then
+		AC_MSG_ERROR([Cannot build tests, check is missing])
+	fi
+
+	AC_PATH_PROG(VALGRIND, [valgrind])
+fi
+
+AM_CONDITIONAL(HAVE_VALGRIND, [test "x$VALGRIND" != "x"])
+AM_CONDITIONAL(BUILD_TESTS, [test "x$build_tests" = "xyes"])
+AM_CONDITIONAL(BUILD_DOCS, [test "x$build_documentation" = "xyes"])
+
+# Used by the udev rules so we can use callouts during testing without
+# installing everything first. Default is the empty string so the installed
+# rule will use udev's default path. Override is in udev/Makefile.am
+AC_SUBST(UDEV_TEST_PATH, "")
+AC_PATH_PROG(SED, [sed])
+
+AC_CONFIG_FILES([Makefile
+		 doc/Makefile
+		 doc/libinput.doxygen
+		 src/Makefile
+		 src/libinput.pc
+		 src/libinput-version.h
+		 test/Makefile
+		 tools/Makefile
+		 udev/Makefile
+		 udev/80-libinput-device-groups.rules
+		 udev/90-libinput-model-quirks.rules])
+AC_CONFIG_FILES([test/symbols-leak-test],
+		[chmod +x test/symbols-leak-test])
+AC_OUTPUT
+
+AC_MSG_RESULT([
+	Prefix			${prefix}
+	udev base dir		${UDEV_DIR}
+
+	Build documentation	${build_documentation}
+	Build tests		${build_tests}
+	Tests use valgrind	${VALGRIND}
+	Tests use libunwind	${HAVE_LIBUNWIND}
+	Build GUI event tool	${build_eventgui}
+	])

doc/Makefile.am

@@ -0,0 +1,84 @@
+EXTRA_DIST = \
+	     middle-button-emulation.svg \
+	     touchpad-tap-state-machine.svg \
+	     touchpad-softbutton-state-machine.svg
+
+if BUILD_DOCS
+
+noinst_DATA = html/index.html
+
+header_files = \
+	$(top_srcdir)/src/libinput.h \
+	$(top_srcdir)/README.txt \
+	$(srcdir)/absolute-axes.dox \
+	$(srcdir)/clickpad-softbuttons.dox \
+	$(srcdir)/device-configuration-via-udev.dox \
+	$(srcdir)/faqs.dox \
+	$(srcdir)/gestures.dox \
+	$(srcdir)/normalization-of-relative-motion.dox \
+	$(srcdir)/palm-detection.dox \
+	$(srcdir)/page-hierarchy.dox \
+	$(srcdir)/pointer-acceleration.dox \
+	$(srcdir)/reporting-bugs.dox \
+	$(srcdir)/scrolling.dox \
+	$(srcdir)/seats.dox \
+	$(srcdir)/t440-support.dox \
+	$(srcdir)/tapping.dox \
+	$(srcdir)/test-suite.dox \
+	$(srcdir)/tools.dox \
+	$(srcdir)/touchpads.dox
+
+diagram_files = \
+	$(srcdir)/dot/seats-sketch.gv \
+	$(srcdir)/dot/seats-sketch-libinput.gv \
+	$(srcdir)/dot/libinput-stack-wayland.gv \
+	$(srcdir)/dot/libinput-stack-xorg.gv \
+	$(srcdir)/dot/libinput-stack-gnome.gv \
+	$(srcdir)/dot/evemu.gv \
+	$(srcdir)/svg/software-buttons.svg \
+	$(srcdir)/svg/clickfinger.svg \
+	$(srcdir)/svg/button-scrolling.svg \
+	$(srcdir)/svg/edge-scrolling.svg \
+	$(srcdir)/svg/palm-detection.svg \
+	$(srcdir)/svg/pinch-gestures.svg \
+	$(srcdir)/svg/ptraccel-linear.svg \
+	$(srcdir)/svg/ptraccel-low-dpi.svg \
+	$(srcdir)/svg/ptraccel-touchpad.svg \
+	$(srcdir)/svg/ptraccel-trackpoint.svg \
+	$(srcdir)/svg/swipe-gestures.svg \
+	$(srcdir)/svg/tap-n-drag.svg \
+	$(srcdir)/svg/thumb-detection.svg \
+	$(srcdir)/svg/top-software-buttons.svg \
+	$(srcdir)/svg/touchscreen-gestures.svg \
+	$(srcdir)/svg/twofinger-scrolling.svg
+
+style_files = \
+	      style/header.html \
+	      style/footer.html \
+	      style/customdoxygen.css \
+	      style/bootstrap.css
+
+html/index.html: libinput.doxygen $(header_files) $(diagram_files) $(style_files)
+	$(AM_V_GEN)(cat $<; \
+          echo "INPUT = $(header_files)"; \
+          ) | $(DOXYGEN) -
+
+clean-local:
+	$(AM_V_at)rm -rf html
+
+doc_src= $(shell find html -type f -printf "html/%P\n" 2>/dev/null)
+EXTRA_DIST += $(builddir)/html/index.html \
+	      $(doc_src) \
+	      $(diagram_files) \
+	      $(header_files) \
+	      $(style_files)
+endif
+
+# make sure doc was built before running dist
+dist-hook:
+	@test -f $(distdir)/html/index.html || (\
+		echo "******************************************************" && \
+		echo "Couldn't find documentation files, refusing make dist." && \
+		echo "Install doxygen to build documentation for tarball." && \
+		echo "******************************************************" && \
+		test )

doc/absolute-axes.dox

@@ -0,0 +1,130 @@
+/**
+@page absolute_axes Absolute axes
+
+Devices with absolute axes are those that send positioning data for an axis in
+a device-specific coordinate range, defined by a minimum and a maximum value.
+Compare this to relative devices (e.g. a mouse) that can only detect
+directional data, not positional data.
+
+libinput supports three types of devices with absolute axes:
+
+ - multi-touch screens
+ - single-touch screens
+ - graphics tablets (currently WIP)
+
+Touchpads are technically absolute devices but libinput converts the axis values
+to directional motion and posts events as relative events. Touchpads do not count
+as absolute devices in libinput.
+
+For all absolute devices in libinput, the default unit for x/y coordinates is
+in mm off the top left corner on the device, or more specifically off the
+device's sensor.
+
+@section absolute_axes_handling Handling of absolute coordinates
+
+In most use-cases, absolute input devices are mapped to a single screen. For
+direct input devices such as touchscreens the aspect ratio of the screen and
+the device match. Mapping the input device position to the output position is
+thus a simple mapping between two coordinates. libinput provides the API for
+this with
+
+- libinput_event_pointer_get_absolute_x_transformed() for pointer events
+- libinput_event_touch_get_x_transformed() for touch events
+
+libinput's API only provides the call to map into a single coordinate range.
+If the coordinate range has an offset, the compositor is responsible for
+applying that offset after the mapping. For example, if the device is mapped
+to the right of two outputs, add the output offset to the transformed
+coordinate.
+
+@section absolute_axes_nores Devices without x/y resolution
+
+An absolute device that does not provide a valid resolution is considered
+buggy and must be fixed in the kernel. Some touchpad devices that do not
+provide resolution, those devices are correctly handled within libinput
+(touchpads are not absolute devices, as mentioned above).
+
+@section calibration Calibration of absolute devices
+
+Absolute devices may require calibration to map precisely into the output
+range required. This is done by setting a transformation matrix, see
+libinput_device_config_calibration_set_matrix() which is applied to
+each input coordinate.
+
+@f[
+\begin{pmatrix}
+ cos\theta & -sin\theta & xoff \\
+ sin\theta &  cos\theta & yoff \\
+ 0   & 0    & 1
+\end{pmatrix} \begin{pmatrix}
+x \\ y \\ 1
+\end{pmatrix}
+@f]
+
+@f$\theta@f$ is the rotation angle. The offsets @f$xoff@f$ and @f$yoff@f$ are
+specified in device dimensions, i.e. a value of 1 equals one device width
+or height. Note that rotation applies to the device's origin, rotation
+usually requires an offset to move the coordinates back into the original
+range.
+
+The most common matrices are:
+
+- 90 degree clockwise:
+@f$
+\begin{pmatrix}
+ 0 & -1 & 1 \\
+ 1 & 0 & 0 \\
+ 0 & 0 & 1
+\end{pmatrix}
+@f$
+
+- 180 degree clockwise:
+@f$
+\begin{pmatrix}
+ -1 & 0 & 1 \\
+ 0 & -1 & 1 \\
+ 0 & 0 & 1
+\end{pmatrix}
+@f$
+
+- 270 degree clockwise:
+@f$
+\begin{pmatrix}
+ 0 & 1 & 0 \\
+ -1 & 0 & 1 \\
+ 0 & 0 & 1
+\end{pmatrix}
+@f$
+
+- reflection along y axis:
+@f$
+\begin{pmatrix}
+ -1 & 0 & 1 \\
+ 1 & 0 & 0 \\
+ 0 & 0 & 1
+\end{pmatrix}
+@f$
+
+See Wikipedia's
+<a href="http://en.wikipedia.org/wiki/Transformation_matrix">Transformation
+Matrix article</a> for more information on the matrix maths.
+
+See libinput_device_config_calibration_get_default_matrix() for how these
+matrices must be supplied to libinput.
+
+@section absolute_axes_nonorm Why x/y coordinates are not normalized
+
+x/y are not given in @ref motion_normalization "normalized coordinates"
+([0..1]) for one simple reason: the aspect ratio of virtually all current
+devices is something other than 1:1. A normalized axes thus is only useful to
+determine that the stylus is e.g. at 78% from the left, 34% from the top of
+the device. Without knowing the per-axis resolution, these numbers are
+meaningless. Worse, calculation based on previous coordinates is simply wrong:
+a movement from 0/0 to 50%/50% is not a 45% degree line.
+
+This could be alleviated by providing resolution and information about the
+aspect ratio to the caller. Which shifts processing and likely errors into the
+caller for little benefit. Providing the x/y axes in mm from the outset
+removes these errors.
+
+*/

doc/api/libinput.doxygen.in

@@ -1,34 +0,0 @@
-PROJECT_NAME           = @PACKAGE_NAME@
-PROJECT_NUMBER         = @PACKAGE_VERSION@
-PROJECT_BRIEF          = "A wrapper library for input devices"
-JAVADOC_AUTOBRIEF      = YES
-TAB_SIZE               = 8
-OPTIMIZE_OUTPUT_FOR_C  = YES
-EXTRACT_ALL            = YES
-EXTRACT_STATIC         = YES
-MAX_INITIALIZER_LINES  = 0
-WARNINGS               = YES
-QUIET                  = YES
-INPUT                  = "@builddir@"
-IMAGE_PATH             = "@builddir@"
-OUTPUT_DIRECTORY       = doc
-GENERATE_HTML          = YES
-HTML_OUTPUT            = html
-SEARCHENGINE           = NO
-USE_MATHJAX            = YES
-MATHJAX_RELPATH        = https://cdn.mathjax.org/mathjax/latest
-GENERATE_LATEX         = NO
-MACRO_EXPANSION        = YES
-EXPAND_ONLY_PREDEF     = YES
-PREDEFINED             = LIBINPUT_ATTRIBUTE_PRINTF(f, a)= \
-                         LIBINPUT_ATTRIBUTE_DEPRECATED
-DOTFILE_DIRS           = "@builddir@"
-EXAMPLE_PATH           = "@builddir@"
-SHOW_NAMESPACES        = NO
-HAVE_DOT               = YES
-
-HTML_HEADER = "@builddir@/header.html"
-HTML_FOOTER = "@builddir@/footer.html"
-HTML_EXTRA_STYLESHEET = "@builddir@/bootstrap.css" \
-			"@builddir@/customdoxygen.css" \
-			"@builddir@/libinputdoxygen.css"

doc/api/mainpage.dox

@@ -1,135 +0,0 @@
-/**
-@mainpage
-
-This is the libinput API reference.
-
-This documentation is aimed at developers of Wayland compositors. User
-documentation is available
-[here](https://wayland.freedesktop.org/libinput/doc/latest).
-
-@section concepts Concepts
-
-@subsection concepts_initialization Initialization of a libinput context
-
-libinput provides two different backends:
-- a @ref libinput_udev_create_context "udev backend" where notifications
-  about new and removed devices are provided by udev, and
-- a @ref libinput_path_create_context "path backend" where
-  @ref libinput_path_add_device "device addition" and
-  @ref libinput_path_remove_device "device removal" need to be handled by
-  the caller.
-
-See section @ref base for information about initializing a libinput context.
-
-@subsection concepts_events Monitoring for events
-
-libinput exposes a single @ref libinput_get_fd "file descriptor" to the
-caller. This file descriptor should be monitored by the caller, whenever
-data is available the caller **must** immediately call libinput_dispatch().
-Failure to do so will result in erroneous behavior.
-
-libinput_dispatch() may result in one or more events being available to the
-caller. After libinput_dispatch() a caller **should** call
-libinput_get_event() to retrieve and process this event. Whenever
-libinput_get_event() returns `NULL`, no further events are available.
-
-See section @ref event for more information about events.
-
-@subsection concepts_seats Device grouping into seats
-
-All devices are grouped into physical and logical seats. Button and key
-states are available per-device and per-seat. See @ref seat for more
-information.
-
-@subsection concepts_devices Device capabilities
-
-libinput does not use device types. All devices have @ref
-libinput_device_has_capability "capabilities" that define which events may
-be generated. See @ref device for more information about devices.
-
-Specific event types include:
-- @ref event_keyboard
-- @ref event_pointer
-- @ref event_touch
-- @ref event_gesture
-- @ref event_tablet
-- @ref event_tablet_pad
-- @ref event_switch
-
-
-@subsection concepts_configuration Device configuration
-
-libinput relies on the caller for device configuration. See
-@ref config for more information.
-
-@subsection example An example libinput program
-
-The simplest libinput program looks like this:
-
-@code
-static int open_restricted(const char *path, int flags, void *user_data)
-{
-	int fd = open(path, flags);
-	return fd < 0 ? -errno : fd;
-}
-
-static void close_restricted(int fd, void *user_data)
-{
-	close(fd);
-}
-
-const static struct libinput_interface interface = {
-	.open_restricted = open_restricted,
-	.close_restricted = close_restricted,
-};
-
-
-int main(void) {
-	struct libinput *li;
-	struct libinput_event *event;
-
-	li = libinput_udev_create_context(&interface, NULL, udev);
-	libinput_udev_assign_seat(li, "seat0");
-	libinput_dispatch(li);
-
-	while ((event = libinput_get_event(li)) != NULL) {
-
-		// handle the event here
-
-		libinput_event_destroy(event);
-		libinput_dispatch(li);
-	}
-
-	libinput_unref(li);
-
-	return 0;
-}
-
-@endcode
-
-@section building_against Building against libinput
-
-libinput provides a
-[pkg-config](https://www.freedesktop.org/wiki/Software/pkg-config/) file.
-Software that uses libinput should use pkg-config and the
-`PKG_CHECK_MODULES` autoconf macro.
-Otherwise, the most rudimentary way to compile and link a program against
-libinput is:
-
-@verbatim
-    gcc -o myprogram myprogram.c `pkg-config --cflags --libs libinput`
-@endverbatim
-
-For further information on using pkgconfig see the pkg-config documentation.
-
-@section stability Backwards-compatibility
-
-libinput promises backwards-compatibility across all the 1.x.y version. An
-application built against libinput 1.x.y will work with any future 1.*.*
-release.
-
-@section About
-
-Documentation generated from git commit [__GIT_VERSION__](https://gitlab.freedesktop.org/libinput/libinput/commit/__GIT_VERSION__)
-
-*/

doc/api/meson.build

@@ -1,52 +0,0 @@
-prg_install = find_program('install')
-
-doxygen = find_program('doxygen', required : false)
-if not doxygen.found()
-	error('Program "doxygen" not found or not executable. Try building with -Ddocumentation=false')
-endif
-dot = find_program('dot', required : false)
-if not dot.found()
-	error('Program "dot" not found or not executable. Try building with -Ddocumentation=false')
-endif
-
-mainpage = vcs_tag(command : ['git', 'log', '-1', '--format=%h'],
-		 fallback : 'unknown',
-		 input : 'mainpage.dox',
-		 output : 'mainpage.dox',
-		 replace_string: '__GIT_VERSION__')
-
-src_doxygen = files(
-	# source files
-	'../../src/libinput.h',
-	# style files
-	'style/header.html',
-	'style/footer.html',
-	'style/customdoxygen.css',
-	'style/bootstrap.css',
-	'style/libinputdoxygen.css',
-)
-
-doxyfiles = []
-foreach f : src_doxygen
-	df = configure_file(input: f,
-			    output: '@PLAINNAME@',
-			    copy : true)
-	doxyfiles += [ df ]
-endforeach
-
-doc_config = configuration_data()
-doc_config.set('PACKAGE_NAME', meson.project_name())
-doc_config.set('PACKAGE_VERSION', meson.project_version())
-doc_config.set('builddir', meson.current_build_dir())
-
-doxyfile = configure_file(input : 'libinput.doxygen.in',
-			  output : 'libinput.doxygen',
-			  configuration : doc_config)
-
-custom_target('doxygen',
-	      input : [ doxyfiles, doxyfile, mainpage ] + src_doxygen,
-	      output : [ 'html' ],
-	      command : [ doxygen, doxyfile ],
-	      install : false,
-	      depends: [ mainpage ],
-	      build_by_default : true)

doc/api/page-hierarchy.dox

@@ -1,7 +0,0 @@
-/**
-
-@page Tablets
-
-- @subpage tablet serial numbers
-
-*/

doc/api/style/libinputdoxygen.css

@@ -1,120 +0,0 @@
-@import url("https://fonts.googleapis.com/css?family=Roboto+Mono");
-
-dd {
-    margin-left: 30px;
-}
-
-.title {
-	font-size: 200%;
-	font-weight: bold;
-}
-
-.title .ingroups {
-	font-size: 50%;
-}
-
-h1 {
-	font-size: 150%;
-	color: #354C7B;
-	background: none;
-	border-bottom: 1px solid #879ECB;
-	font-size: 150%;
-	font-weight: normal;
-	padding-top: 8px;
-	padding-bottom: 8px;
-	padding-left: 0px;
-	width: 100%;
-}
-
-h2 {
-	font-size: 120%;
-	color: #354C7B;
-	background: none;
-	border-bottom: 1px solid #879ECB;
-	font-size: 150%;
-	font-weight: normal;
-	padding-top: 8px;
-	padding-bottom: 8px;
-	padding-left: 0px;
-	width: 100%;
-}
-
-.sm-dox li {
-	float:left;
-	border-top: 0;
-	padding-right: 20px;
-}
-
-.sm li, .sm a {
-	position: relative;
-}
-
-.sm, .sm ul, .sm li {
-	list-style: none;
-	display: block;
-	line-height: normal;
-	direction: ltr;
-	text-align: left;
-}
-
-.sm, .sm *, .sm *::before, .sm *::after {
-	box-sizing: border-box;
-}
-
-#main-nav {
-	padding: 30px;
-}
-
-/* Main menu sub-items like file-list, etc */
-#main-menu li ul {
-	display: none;
-}
-
-.paramname {
-	padding-right: 10px;
-}
-
-.memtitle {
-	background-image: none;
-	background-color: #F0F0F0;
-}
-
-.memproto {
-	background-color: #F0F0F0;
-}
-
-.headertitle {
-	background-image: none;
-	background-color: #F0F0F0;
-}
-
-div.header {
-	border: none;
-}
-
-td.fieldname {
-	font-family: 'Roboto Mono', monospace;
-}
-
-.fieldtable th {
-	background-image: none;
-	background-color: #F0F0F0;
-}
-
-body {
-	letter-spacing: 0px;
-}
-
-.mdescLeft, .mdescRight, .memItemLeft, .memItemRight, .memTemplItemLeft, .memTemplItemRight, .memTemplParams {
-	background-color: #F0F0F0;
-}
-
-a {
-	color: #2873b0;
-
-}
-
-.navpath ul {
-	background-image: none;
-	background-color: #F0F0F0;
-}

doc/button-debouncing-wave-diagram.txt

@@ -1,50 +0,0 @@
-# Source for the button debouncing wave diagram
-# Paste into http://wavedrom.com/editor.html
-{signal: [
- {name:'current mode',    wave: '3............', data: ['normal button press and release']},
-  {name:'physical button', wave: '01......0....'},
-  {name:'application ',    wave: '01......0....'},
-  {},
- ['bounce mode',
-  {name:'current mode',    wave: '4............', data: ['debounced button press']},
-  {name:'physical button', wave: '0101...0.....'},
-  {name: 'timeouts',       wave: '01...0.1...0.'},
-  {name:'application ',    wave: '01.....0.....'},
-  {},
-  {name:'current mode',    wave: '4............', data: ['debounced button release']},
-  {name:'physical button', wave: '1...010......'},
-  {name: 'timeouts',       wave: '0...1...0....'},
-  {name:'application ',    wave: '1...0........'},
-  {},
-  {name:'current mode',    wave: '5............', data: ['delayed button press']},
-  {name:'physical button', wave: '1...01.......'},
-  {name: 'timeouts',       wave: '0...1...0....'},
-  {name:'application ',    wave: '1...0...1....'},
-  {},
-  {name:'current mode',    wave: '5............', data: ['delayed button release']},
-  {name:'physical button', wave: '0...10.......'},
-  {name: 'timeouts',       wave: '0...1...0....'},
-  {name:'application ',    wave: '0...1...0....'},
-   ],
-  {},
-  ['spurious mode',
-  {name:'current mode',    wave: '3............', data: ['first spurious button release ']},
-  {name:'physical button', wave: '1.......01...'},
-  {name:'application ',    wave: '1.......01...'},
-  {},
-  {name:'current mode',    wave: '3............', data: ['later spurious button release ']},
-  {name:'physical button', wave: '1....01......'},
-  {name: 'timeouts',       wave: '0....1..0....'},
-  {name:'application ',    wave: '1............'},
-  {},
-  {name:'current mode',    wave: '3............', data: ['delayed release in spurious mode ']},
-  {name:'physical button', wave: '1....0.......'},
-  {name: 'timeouts',       wave: '0....1..0....'},
-  {name:'application ',    wave: '1.......0....'}
-   ],
-
-],
- head:{
-   text:'Button Debouncing Scenarios',
- },
-}

doc/clickpad-softbuttons.dox

@@ -0,0 +1,95 @@
+/**
+@page clickpad_softbuttons Clickpad software button behavior
+
+Clickpad is the name given to touchpads without physical buttons below the
+touchpad. Instead, the whole touchpad acts as a button and left or right
+button clicks are distinguished by the location and/or number of fingers on
+the touchpad. <a href="http://www.synaptics.com/en/clickpad.php">"ClickPad" is
+a trademark by Synaptics Inc.</a> but for simplicity we refer to any
+touchpad with the above feature as Clickpad, regardless of the manufacturer.
+
+A clickpad is always marked with the <a
+href="https://www.kernel.org/doc/Documentation/input/event-codes.txt">INPUT_PROP_BUTTONPAD</a> property.
+To perform a right-click on a Clickpad, libinput provides @ref
+software_buttons and @ref clickfinger.
+
+In the page below, the term "click" shall refer to a physical button press
+and/or release of the touchpad, the term "button event" refers to the events
+generated by libinput and passed to the caller in response to a click.
+
+@section software_buttons Software button areas
+
+On most clickpads, this is the default behavior. The bottom of the touchpad
+is split in the middle to generate left or right button events on click. The
+height of the button area depends on the hardware but is usually around
+10mm.
+
+Left, right and middle button events can be triggered as follows:
+- if a finger is in the main area or the left button area, a click generates
+  left button events.
+- if a finger is in the right area, a click generates right button events.
+- if there is a finger in both the left and right button area, a click
+  generates middle button events.
+
+@image html software-buttons.svg "Left, right and middle-button click with software button areas"
+
+If fingers are down in the main area in addition to fingers in the
+left or right button area, those fingers are are ignored.
+A release event always releases the buttons logically down, regardless of
+the current finger position
+
+The movement of a finger can alter the button area behavior:
+- if a finger starts in the main area and moves into the software button
+  area, the software buttons do not apply to that finger
+- a finger in the software button area does not move the pointer
+- if a finger moves out out of the button area it will control the pointer
+  if it's the first finger in the main area
+- once a finger has moved out of the button area, it cannot move back in and
+  trigger a right or middle button event
+
+On some touchpads, notably the 2015 Lenovo X1 Carbon 3rd series, the very
+bottom end of the touchpad is outside of the sensor range but it is possible
+to trigger a physical click there. To libinput, the click merely shows up as
+a left button click without any positional finger data and it is
+impossible to determine whether it is a left or a right click. libinput
+ignores such button clicks, this behavior is intentional.
+
+@section clickfinger Clickfinger behavior
+
+This is the default behavior on Apple touchpads.
+Here, a left, right, middle button event is generated when one, two, or
+three fingers are held down on the touchpad when a physical click is
+generated. The location of the fingers does not matter and there are no
+software-defined button areas.
+
+@image html clickfinger.svg "One, two and three-finger click with Clickfinger behavior"
+
+On some touchpads, libinput imposes a limit on how the fingers may be placed
+on the touchpad. In the most common use-case this allows for a user to
+trigger a click with the thumb while leaving the pointer-moving finger on
+the touchpad.
+
+@image html clickfinger-distance.svg "Illustration of the distance detection algorithm"
+
+In the illustration above the red area marks the proximity area around the
+first finger. Since the thumb is outside of that area libinput considers the
+click a single-finger click rather than a two-finger click.
+
+Clickfinger configuration can be enabled through the
+libinput_device_config_click_set_method() call. If clickfingers are
+enabled on a touchpad with top software buttons, the top area will keep
+acting as softbuttons for use with the trackpoint. Clickfingers will be used
+everywhere else on the touchpad.
+
+@section special_clickpads Special Clickpads
+
+The Lenovo *40 series laptops have a clickpad that provides two software button sections, one at
+the top and one at the bottom. See @ref t440_support "Lenovo *40 series touchpad support"
+for details on the top software button.
+
+Some Clickpads, notably some Cypress ones, perform right button detection in
+firmware and appear to userspace as if the touchpad had physical buttons.
+While physically clickpads, these are not handled by the software and
+treated like traditional touchpads.
+
+*/

doc/device-configuration-via-udev.dox

@@ -0,0 +1,120 @@
+/**
+@page udev_config Static device configuration via udev
+
+libinput supports some static configuration through udev properties.
+These properties are read when the device is initially added
+to libinput's device list, i.e. before the @ref
+LIBINPUT_EVENT_DEVICE_ADDED event is generated.
+
+The following udev properties are supported:
+<dl>
+<dt>LIBINPUT_CALIBRATION_MATRIX</dt>
+<dd>Sets the calibration matrix, see
+libinput_device_config_calibration_get_default_matrix(). If unset,
+defaults to the identity matrix.
+
+The udev property is parsed as 6 floating point numbers separated by a
+single space each (scanf(3) format "%f %f %f %f %f %f").
+The 6 values represent the first two rows of the calibration matrix as
+described in libinput_device_config_calibration_set_matrix().
+
+Example values are:
+@code
+ ENV{LIBINPUT_CALIBRATION_MATRIX}="1 0 0 0 1 0" # default
+ ENV{LIBINPUT_CALIBRATION_MATRIX}="0 -1 1 1 0 0" # 90 degree clockwise
+ ENV{LIBINPUT_CALIBRATION_MATRIX}="-1 0 1 0 -1 1" # 180 degree clockwise
+ ENV{LIBINPUT_CALIBRATION_MATRIX}="0 1 0 -1 0 1" # 270 degree clockwise
+ ENV{LIBINPUT_CALIBRATION_MATRIX}="-1 0 1 1 0 0" # reflect along y axis
+@endcode
+</dd>
+<dt>LIBINPUT_DEVICE_GROUP</dt>
+<dd>A string identifying the @ref libinput_device_group for this device. Two
+devices with the same property value are grouped into the same device group,
+the value itself is irrelevant otherwise.
+</dd>
+<dt>ID_SEAT</dt>
+<dd>Assigns the physical seat for this device. See
+libinput_seat_get_physical_name(). Defaults to "seat0".</dd>
+<dt>ID_INPUT</dt>
+<dd>If this property is set, the device is considered an input device. Any
+device with this property missing will be ignored, see @ref
+udev_device_type.</dt>
+</dd>
+<dt>ID_INPUT_KEYBOARD, ID_INPUT_KEY, ID_INPUT_MOUSE, ID_INPUT_TOUCHPAD,
+ID_INPUT_TOUCHSCREEN, ID_INPUT_TABLET, ID_INPUT_JOYSTICK,
+ID_INPUT_ACCELEROMETER</dt>
+<dd>If any of the above is set, libinput initializes the device as the given
+type, see @ref udev_device_type. Note that for historical reasons more than
+one of these may be set at any time, libinput will select only one of these
+to determine the device type. To ensure libinput selects the correct device
+type, only set one of them.</dd>
+<dt>WL_SEAT</dt>
+<dd>Assigns the logical seat for this device. See
+libinput_seat_get_logical_name()
+context. Defaults to "default".</dd>
+<dt>MOUSE_DPI</dt>
+<dd>HW resolution and sampling frequency of a relative pointer device.
+See @ref motion_normalization for details.
+</dd>
+<dt>MOUSE_WHEEL_CLICK_ANGLE</dt>
+<dd>The angle in degrees for each click on a mouse wheel. See
+libinput_pointer_get_axis_source() for details.
+</dd>
+<dt>POINTINGSTICK_CONST_ACCEL</dt>
+<dd>A constant (linear) acceleration factor to apply to pointingstick deltas
+to normalize them.
+<dt>LIBINPUT_MODEL_*</dt>
+<dd><b>This prefix is reserved as private API, do not use.</b>. See @ref
+model_specific_configuration for details.
+</dd>
+<dt>LIBINPUT_ATTR_*</dt>
+<dd><b>This prefix is reserved as private API, do not use.</b>. See @ref
+model_specific_configuration for details.
+</dd>
+</dl>
+
+Below is an example udev rule to assign "seat1" to a device from vendor
+0x012a with the model ID of 0x034b.
+@code
+ACTION=="add|change", KERNEL=="event[0-9]*", ENV{ID_VENDOR_ID}=="012a", \
+ENV{ID_MODEL_ID}=="034b", ENV{ID_SEAT}="seat1"
+@endcode
+
+
+@section udev_device_type Device type assignment via udev
+
+libinput requires the <b>ID_INPUT</b> property to be set on a device,
+otherwise the device will be ignored. In addition, one of <b>
+ID_INPUT_KEYBOARD, ID_INPUT_KEY, ID_INPUT_MOUSE, ID_INPUT_TOUCHPAD,
+ID_INPUT_TOUCHSCREEN, ID_INPUT_TABLET, ID_INPUT_JOYSTICK,
+ID_INPUT_ACCELEROMETER</b> must be set on the device to determine the
+device type. The usual error handling applies within libinput and a device
+type label does not guarantee that the device is initialized by libinput.
+If a device fails to meet the requirements for a device type (e.g. a keyboard
+labelled as touchpad) the device will not be available through libinput.
+
+Only one device type should be set per device at a type, though libinput can
+handle some combinations for historical reasons.
+
+Below is an example udev rule  to remove an <b>ID_INPUT_TOUCHPAD</b> setting
+and change it into an <b>ID_INPUT_TABLET</b> setting. This rule would apply
+for a device with the vendor/model ID of 012a/034b.
+
+@code
+ACTION=="add|change", KERNEL=="event[0-9]*", ENV{ID_VENDOR_ID}=="012a", \
+ENV{ID_MODEL_ID}=="034b", ENV{ID_INPUT_TOUCHPAD}="", ENV{ID_INPUT_TABLET}="1"
+@endcode
+
+@section model_specific_configuration Model-specific configuration
+
+libinput reserves the property prefixes <b>LIBINPUT_MODEL_</b> and
+<b>LIBINPUT_ATTR_*</b> for model-specific configuration. <b>These prefixes
+are reserved as private API, do not use.</b>
+
+The effect of these properties may be to enable or disable certain
+features on a specific device or set of devices, to change configuration
+defaults or any other reason. The effects of setting these properties, the
+format of the property and the value of the property are subject to change
+at any time.
+
+*/

doc/dot/libinput-stack-gnome.gv

@@ -23,7 +23,7 @@ digraph stack
     gsettings
   }
 
-  gsd [label="mutter"];
+  gsd [label="gnome-settings-daemon"];
 
   gsd -> gsettings
   gsd -> xserver

doc/dot/libinput-stack-wayland.gv

@@ -0,0 +1,17 @@
+digraph stack
+{
+  rankdir="LR";
+  node [
+    shape="box";
+  ]
+
+  kernel [label="Kernel"];
+
+  libinput;
+  compositor [label="Wayland Compositor"];
+  client [label="Wayland Client"];
+
+  kernel -> libinput
+  libinput -> compositor
+  compositor -> client
+}

doc/dot/libinput-stack-xorg.gv

@@ -1,6 +1,5 @@
 digraph stack
 {
-  compound=true;
   rankdir="LR";
   node [
     shape="box";
@@ -9,12 +8,12 @@ digraph stack
   kernel [label="Kernel"];
 
   libinput;
+  xf86libinput [label="xf86-input-libinput"];
   xserver [label="X Server"];
-  record [label="libinput record"];
+  client [label="X11 client"];
 
   kernel -> libinput
-  libinput -> xserver
+  libinput -> xf86libinput
-
+  xf86libinput -> xserver
-  kernel -> record;
+  xserver -> client
-  record -> stdout
 }

doc/faqs.dox

@@ -0,0 +1,57 @@
+/**
+@page faq FAQs - Frequently Asked Questions
+
+Frequently asked questions about libinput.
+
+@section faq_fast_mouse My mouse moves too fast, even at the slowest setting
+
+This is a symptom of high-dpi mice (greater than 1000dpi). These devices
+need a udev hwdb entry to normalize their motion. See @ref
+motion_normalization for a detailed explanation.
+
+@section faq_kinetic_scrolling Kinetic scrolling does not work
+
+The X.Org synaptics driver implemented kinetic scrolling in the driver. It
+measures the scroll speed and once the finger leaves the touchpad the driver
+keeps sending scroll events for a predetermined time. This effectively
+provides for kinetic scrolling without client support but triggers an
+unfixable [bug](https://bugs.freedesktop.org/show_bug.cgi?id=38909): the
+client cannot know that the events are from a kinetic scroll source. Scroll
+events in X are always sent to the current cursor position, a movement of the
+cursor after lifting the finger will send the kinetic scroll events to the
+new client, something the user does not usually expect. A key event during
+the kinetic scroll procedure causes side-effects such as triggering zoom.
+
+libinput does not implement kinetic scrolling for touchpads. Instead it
+provides the libinput_event_pointer_get_axis_source() function that enables
+callers to implement kinetic scrolling on a per-widget basis, see @ref
+scroll_sources.
+
+@section faq_gpl Is libinput GPL-licensed?
+
+No, libinput is MIT licensed. The Linux kernel header file linux/input.h in
+libinput's tree is provided to ensure the same behavior regardless of which
+kernel version libinput is built on. It does not make libinput GPL-licensed.
+
+@section faq_config_options Where is the configuration stored?
+
+libinput does not store configuration options, it is up to the caller to
+manage these and decide which configuration option to apply to each device.
+This must be done at startup, after a resume and whenever a new device is
+detected.
+
+In a GNOME X.Org stack a user would usually toggle an option in
+the gnome-control-center which adjusts a gsettings entry. That change is
+picked up by gnome-settings-daemon and applied to the device by adjusting
+input device properties that the xf86-input-libinput driver provides.
+The input device property changes map to the respective libinput
+configuration options.
+
+@dotfile libinput-stack-gnome.gv
+
+This has an effect on the availability of configuration options: if an
+option is not exposed by the intermediary, it cannot be configured by the
+client. Also some configuration options that are provided by the
+intermediary may not be libinput-specific configuration options.
+
+*/

doc/gestures.dox

@@ -0,0 +1,91 @@
+/**
+@page gestures Gestures
+
+libinput supports basic gestures on touchpads and other indirect input
+devices. Two types of gestures are supported: @ref gestures_pinch and @ref
+gestures_swipe. Support for gestures depends on the hardware device, most
+touchpads support both gestures and any device that may send gesture events
+has the @ref LIBINPUT_DEVICE_CAP_GESTURE capability set.
+
+Note that libinput **does not** support gestures on touchscreens, see
+@ref gestures_touchscreens.
+
+@section gestures_lifetime Lifetime of a gesture
+
+A gesture's lifetime has three distinct stages: begin, update and end, each
+with their own event types. Begin is sent when the fingers are first set
+down or libinput decides that the gesture begins. For @ref gestures_pinch
+this sets the initial scale. Any events changing properties of the gesture
+are sent as update events. On termination of the gesture, an end event is
+sent.
+
+A gesture includes the finger count (see
+libinput_event_gesture_get_finger_count()) and that finger count remains the
+same for the lifetime of a gesture. Thus, if a user puts down a fourth
+finger during a three-finger swipe gesture, libinput will end
+the three-finger gesture and, if applicable, start a four-finger swipe
+gesture. A caller may decide that those gestures are semantically identical
+and continue the two gestures as one single gesture.
+
+@see LIBINPUT_EVENT_GESTURE_PINCH_BEGIN
+@see LIBINPUT_EVENT_GESTURE_PINCH_UPDATE
+@see LIBINPUT_EVENT_GESTURE_PINCH_END
+@see LIBINPUT_EVENT_GESTURE_PINCH_BEGIN
+@see LIBINPUT_EVENT_GESTURE_SWIPE_UPDATE
+@see LIBINPUT_EVENT_GESTURE_SWIPE_END
+
+@section gestures_pinch Pinch gestures
+
+Pinch gestures are executed when two or more fingers are located on the
+touchpad and are either changing the relative distance to each other
+(pinching) or are changing the relative angle (rotate). Pinch gestures may
+change both rotation and distance at the same time. For such gestures,
+libinput calculates a logical center for the gestures and provides the
+caller with the delta x/y coordinates of that center, the relative angle of
+the fingers compared to the previous event, and the absolute scale compared
+to the initial finger position.
+
+@image html pinch-gestures.svg "The pinch and rotate gestures"
+
+The illustration above shows a basic pinch in the left image and a rotate in
+the right angle. Not shown is a movement of the logical center if the
+fingers move unevenly. Such a movement is supported by libinput, it is
+merely left out of the illustration.
+
+Note that while position and angle is relative to the previous event, the
+scale is always absolute and a multiplier of the initial finger position's
+scale.
+
+@section gestures_swipe Swipe gestures
+
+Swipe gestures are executed when three or more fingers are moved
+synchronously in the same direction. libinput provides x and y coordinates
+in the gesture and thus allows swipe gestures in any direction, including
+the tracing of complex paths. It is up to the caller to interpret the
+gesture into an action or limit a gesture to specific directions only.
+
+@image html swipe-gestures.svg "The swipe gestures"
+
+The illustration above shows a vertical three-finger swipe. The coordinates
+provided during the gesture are the movements of the logical center.
+
+@section gestures_touchscreens Touchscreen gestures
+
+Touchscreen gestures are **not** interpreted by libinput. Rather, any touch
+point is passed to the caller and any interpretation of gestures is up to
+the caller or, eventually, the X or Wayland client.
+
+Interpreting gestures on a touchscreen requires context that libinput does
+not have, such as the location of windows and other virtual objects on the
+screen as well as the context of those virtual objects:
+
+@image html touchscreen-gestures.svg "Context-sensitivity of touchscreen gestures"
+
+In this example, the finger movements are identical but in the left case
+both fingers are located within the same window, thus suggesting an attempt
+to zoom. In the right case  both fingers are located on a window border,
+thus suggesting a window movement. libinput only has knowledge of the finger
+coordinates (and even then only in device coordinates, not in screen
+coordinates) and thus cannot differentiate the two.
+
+*/

doc/libinput.doxygen.in

@@ -0,0 +1,29 @@
+PROJECT_NAME           = @PACKAGE_NAME@
+PROJECT_NUMBER         = @PACKAGE_VERSION@
+PROJECT_BRIEF          = "A wrapper library for input devices"
+JAVADOC_AUTOBRIEF      = YES
+TAB_SIZE               = 8
+OPTIMIZE_OUTPUT_FOR_C  = YES
+EXTRACT_ALL            = YES
+EXTRACT_STATIC         = YES
+MAX_INITIALIZER_LINES  = 0
+QUIET                  = YES
+INPUT                  = @top_srcdir@/src/libinput.h \
+			 @top_srcdir@/README.txt
+IMAGE_PATH             = @top_srcdir@/doc/svg \
+			 @top_srcdir@/doc/dot
+GENERATE_HTML          = YES
+HTML_TIMESTAMP         = YES
+USE_MATHJAX            = YES
+GENERATE_LATEX         = NO
+MACRO_EXPANSION        = YES
+EXPAND_ONLY_PREDEF     = YES
+PREDEFINED             = LIBINPUT_ATTRIBUTE_PRINTF(f, \
+                         a)= \
+                         LIBINPUT_ATTRIBUTE_DEPRECATED
+DOTFILE_DIRS           = @top_srcdir@/doc/dot
+
+HTML_HEADER = @top_srcdir@/doc/style/header.html
+HTML_FOOTER = @top_srcdir@/doc/style/footer.html
+HTML_EXTRA_STYLESHEET = @top_srcdir@/doc/style/customdoxygen.css \
+			@top_srcdir@/doc/style/bootstrap.css

doc/normalization-of-relative-motion.dox

@@ -1,8 +1,5 @@
-.. _motion_normalization:
+/**
-
+@page motion_normalization Normalization of relative motion
-==============================================================================
-Normalization of relative motion
-==============================================================================
 
 Most relative input devices generate input in so-called "mickeys". A
 mickey is in device-specific units that depend on the resolution
@@ -27,20 +24,11 @@ libinput applies a dpi-dependent acceleration function. At low speeds, a
 movement speed increases, acceleration is applied - at high speeds a low-dpi
 device will roughly feel the same as a higher-dpi mouse.
 
-The reason for the normalization is convenience: a caller can assume that a
-delta of 1 should result in a movement of 1 pixel on a traditional
-(low-dpi) screen. On screens with high resolutions, the caller must scale
-according to the UI scale factors.
-
 This normalization only applies to accelerated coordinates, unaccelerated
 coordinates are left in device-units. It is up to the caller to interpret
 those coordinates correctly.
 
-.. _motion_normalization_touchpad:
+@section Normalization of touchpad coordinates
-
-------------------------------------------------------------------------------
-Normalization of touchpad coordinates
-------------------------------------------------------------------------------
 
 Touchpads may have a different resolution for the horizontal and vertical
 axis. Interpreting coordinates from the touchpad without taking resolution
@@ -48,50 +36,45 @@ into account results in uneven motion.
 
 libinput scales unaccelerated touchpad motion to the resolution of the
 touchpad's x axis, i.e. the unaccelerated value for the y axis is:
-``y = (x / resolution_x) * resolution_y``.
+     y = (x / resolution_x) * resolution_y
 
-.. _motion_normalization_tablet:
+@section Setting custom DPI settings
-
-------------------------------------------------------------------------------
-Normalization of tablet coordinates
-------------------------------------------------------------------------------
-
-See :ref:`tablet-relative-motion`
-
-.. _motion_normalization_customization:
-
-------------------------------------------------------------------------------
-Setting custom DPI settings
-------------------------------------------------------------------------------
 
 Devices usually do not advertise their resolution and libinput relies on
-the udev property **MOUSE_DPI** for this information. This property is usually
+the udev property <b>MOUSE_DPI</b> for this information. This property is usually
-set via the
+set via the <a
-`udev hwdb <http://cgit.freedesktop.org/systemd/systemd/tree/hwdb/70-mouse.hwdb>`_.
+href="http://cgit.freedesktop.org/systemd/systemd/tree/hwdb/70-mouse.hwdb">udev hwdb</a>.
-The ``mouse-dpi-tool`` utility provided by
+The "mouse-dpi-tool" utility provided by <a
-`libevdev <https://freedesktop.org/wiki/Software/libevdev/>`_ should be
+href="http://freedesktop.org/wiki/Software/libevdev/">libevdev</a> should be
 used to measure a device's resolution.
 
-The format of the property for single-resolution mice is: ::
+The format of the property for single-resolution mice is:
-
+@code
-          MOUSE_DPI=resolution@frequency
+     MOUSE_DPI=resolution@frequency
+@endcode
 
 The resolution is in dots per inch, the frequency in Hz.
 The format of the property for multi-resolution mice may list multiple
-resolutions and frequencies: ::
+resolutions and frequencies:
-
+@code
-          MOUSE_DPI=r1@f1 *r2@f2 r3@f3
+     MOUSE_DPI=r1@f1 *r2@f2 r3@f3
+@endcode
 
 The default frequency must be pre-fixed with an asterisk.
 
-For example, these two properties are valid: ::
+For example, these two properties are valid:
+@code
+     MOUSE_DPI=800@125
+     MOUSE_DPI=400@125 800@125 *1000@500 5500@500
+@endcode
 
-          MOUSE_DPI=800@125
+The behavior for a malformed property is undefined.
-          MOUSE_DPI=400@125 800@125 *1000@500 5500@500
 
-The behavior for a malformed property is undefined. If the property is
+If the property is unset, libinput assumes the resolution is 1000dpi.
-unset, libinput assumes the resolution is 1000dpi.
 
 Note that HW does not usually provide information about run-time
 resolution changes, libinput will thus not detect when a resolution
 changes to the non-default value.
+
+*/
+

doc/page-hierarchy.dox

@@ -0,0 +1,36 @@
+/**
+@page touchpads Touchpads
+
+- @subpage scrolling
+- @subpage clickpad_softbuttons
+- @subpage tapping
+- @subpage gestures
+- @subpage palm_detection
+- @subpage t440_support
+
+@page touchscreens Touchscreens
+
+- @subpage absolute_axes
+
+@page pointers Mice, Trackballs, etc.
+
+- @subpage motion_normalization
+
+@page general General setup
+
+- @subpage udev_config
+- @subpage seats
+
+@page misc Users
+
+- @subpage faq
+- @subpage tools
+- @subpage reporting_bugs
+
+@page developers Developers
+
+- @subpage test-suite
+- @subpage tools
+- @subpage pointer-acceleration
+
+*/

doc/palm-detection.dox

@@ -0,0 +1,111 @@
+/**
+@page palm_detection Palm detection
+
+Palm detection tries to identify accidental touches while typing.
+
+On most laptops typing on the keyboard generates accidental touches on the
+touchpad with the palm (usually the area below the thumb). This can lead to
+cursor jumps or accidental clicks.
+
+Interference from a palm depends on the size of the touchpad and the position
+of the user's hand. Data from touchpads showed that almost all palm events on a
+Lenovo T440 happened in the left-most and right-most 5% of the touchpad. The
+T440 series has one of the largest touchpads, other touchpads are less
+affected by palm touches.
+
+@section palm_exclusion_zones Palm exclusion zones
+
+libinput enables palm detection on the edge of the touchpad. Two exclusion
+zones are defined  on the left and right edge of the touchpad.
+If a touch starts in the exclusion zone, it is considered a palm and the
+touch point is ignored. However, for fast cursor movements across the
+screen, it is common for a finger to start inside an exclusion zone and move
+rapidly across the touchpad. libinput detects such movements and avoids palm
+detection on such touch sequences.
+
+Each exclusion zone is divided into a top part and a bottom part. A touch
+starting in the top part of the exclusion zone does not trigger a
+tap (see @ref tapping).
+
+In the diagram below, the exclusion zones are painted red.
+Touch 'A' starts inside the exclusion zone and moves
+almost vertically. It is considered a palm and ignored for cursor movement,
+despite moving out of the exclusion zone.
+
+Touch 'B' starts inside the exclusion zone but moves horizontally out of the
+zone. It is considered a valid touch and controls the cursor.
+
+Touch 'C' occurs in the top part of the exclusion zone. Despite being a
+tapping motion, it does not generate an emulated button event. Touch 'D'
+likewise occurs within the exclusion zone but in the bottom half. libinput
+will generate a button event for this touch.
+
+@image html palm-detection.svg
+
+@section trackpoint-disabling Palm detection during trackpoint use
+
+If a device provides a <a
+href="http://en.wikipedia.org/wiki/Pointing_stick">trackpoint</a>, it is
+usually located above the touchpad. This increases the likelihood of
+accidental touches whenever the trackpoint is used.
+
+libinput disables the touchpad whenever it detects trackpoint activity for a
+certain timeout until after trackpoint activity stops. Touches generated
+during this timeout will not move the pointer, and touches started during
+this timeout will likewise not move the pointer (allowing for a user to rest
+the palm on the touchpad while using the trackstick).
+If the touchpad is disabled, the @ref t440_support "top software buttons"
+remain enabled.
+
+@section disable-while-typing Disable-while-typing
+
+libinput automatically disables the touchpad for a timeout after a key
+press, a feature traditionally referred to as "disable while typing" and
+previously available through the
+[syndaemon(1)](http://linux.die.net/man/1/syndaemon) command. libinput does
+not require an external command and the feature is currently enabled for all
+touchpads but will be reduced in the future to only apply to touchpads where
+finger width or pressure data is unreliable.
+
+Notable behaviors of libinput's disable-while-typing feature:
+- Two different timeouts are used, after a single key press the timeout is
+  short to ensure responsiveness. After multiple key events, the timeout is
+  longer to avoid accidental pointer manipulation while typing.
+- Some keys do not trigger the timeout, specifically some modifier keys 
+  (Ctrl, Alt, Shift, and Fn). Actions such as Ctrl + click thus stay
+  responsive.
+- Touches started while typing do not control the cursor even after typing
+  has stopped, it is thus possible to rest the palm on the touchpad while
+  typing.
+- Physical buttons work even while the touchpad is disabled. This includes
+  software-emulated buttons.
+
+@section thumb-detection Thumb detection
+
+Many users rest their thumb on the touchpad while using the index finger to
+move the finger around. For clicks, often the thumb is used rather than the
+finger. The thumb should otherwise be ignored as a touch, i.e. it should not
+count towards @ref clickfinger and it should not cause a single-finger
+movement to trigger @ref twofinger_scrolling.
+
+libinput uses two triggers for thumb detection: pressure and
+location. A touch exceeding a pressure threshold is considered a thumb if it
+is within the thumb detection zone.
+
+@note "Pressure" on touchpads is synonymous with "contact area", a large
+touch surface area has a higher pressure and thus hints at a thumb or palm
+touching the surface.
+
+Pressure readings are unreliable at the far bottom of the touchpad as a
+thumb hanging mostly off the touchpad will have a small surface area.
+libinput has a definitive thumb zone where any touch is considered a resting
+thumb.
+
+@image html thumb-detection.svg
+
+The picture above shows the two detection areas. In the larger (light red)
+area, a touch is labelled as thumb when it exceeds a device-specific
+pressure threshold. In the lower (dark red) area, a touch is labelled as
+thumb if it remains in that area for a time without moving outside.
+
+*/

doc/pointer-acceleration.dox

@@ -0,0 +1,110 @@
+/**
+@page pointer-acceleration  Pointer acceleration
+
+libinput uses device-specific pointer acceleration methods, with the default
+being the @ref ptraccel-linear. The methods share common properties, such as
+@ref ptraccel-velocity.
+
+This page explains the high-level concepts used in the code. It aims to
+provide an overview for developers and is not necessarily useful for
+users.
+
+@section ptraccel-velocity Velocity calculation
+
+The device's speed of movement is measured across multiple input events
+through so-called "trackers". Each event prepends a the tracker item, each
+subsequent tracker contains the delta of that item to the current position,
+the timestamp of the event that created it and the cardinal direction of the
+movement at the time. If a device moves into the same direction, the
+velocity is calculated across multiple trackers. For example, if a device
+moves steadily for 10 events to the left, the velocity is calculated across
+all 10 events.
+
+Whenever the movement changes direction or significantly changes speed, the
+velocity is calculated from the direction/speed change only. For example, if
+a device moves steadily for 8 events to the left and then 2 events to the
+right, the velocity is only that of the last 2 events.
+
+An extra time limit prevents events that are too old to factor into the
+velocity calculation. For example, if a device moves steadily for 5 events
+to the left, then pauses, then moves again for 5 events to the left, only
+the last 5 events are used for velocity calculation.
+
+The velocity is then used to calculate the acceleration factor
+
+@section ptraccel-factor Acceleration factor
+
+The acceleration factor is the final outcome of the pointer acceleration
+calculations. It is a unitless factor that is applied to the current delta,
+a factor of 2 doubles the delta (i.e. speeds up the movement), a factor of
+less than 1 reduces the delta (i.e. slows the movement).
+
+Any factor less than 1 requires the user to move the device further to move
+the visible pointer. This is called deceleration and enables high precision
+target selection through subpixel movements. libinput's current maximum
+deceleration factor is 0.3 (i.e. slow down to 30% of the pointer speed).
+
+A factor higher than 1 moves the pointer further than the physical device
+moves. This is acceleration and allows a user to cross the screen quickly
+but effectively skips pixels. libinput's current maximum acceleration factor
+is 3.5.
+
+@section ptraccel-linear Linear pointer acceleration
+
+The linear pointer acceleration method is the default for most pointer
+devices. It provides deceleration at very slow movements, a 1:1 mapping for
+regular movements and a linear increase to the maximum acceleration factor
+for fast movements.
+
+Linear pointer acceleration applies to devices with above 1000dpi resolution
+and after @ref motion_normalization is applied.
+
+@image html ptraccel-linear.svg "Linear pointer acceleration"
+
+The image above shows the linear pointer acceleration settings at various
+speeds. The line for 0.0 is the default acceleration curve, speed settings
+above 0.0 accelerate sooner, faster and to a higher maximum acceleration.
+Speed settings below 0 delay when acceleration kicks in, how soon the
+maximum acceleration is reached and the maximum acceleration factor.
+
+Extremely low speed settings provide no acceleration and additionally
+decelerate all movement by a constant factor.
+
+@section ptraccel-low-dpi Pointer acceleration for low-dpi devices
+
+Low-dpi devices are those with a physical resolution of less than 1000 dots
+per inch (dpi). The pointer acceleration is adjusted to provide roughly the
+same feel for all devices at normal to high speeds. At slow speeds, the
+pointer acceleration works on device-units rather than normalized
+coordinates (see @ref motion_normalization).
+
+@image html ptraccel-low-dpi.svg "Pointer acceleration for low-dpi devices"
+
+The image above shows the default pointer acceleration curve for a speed of
+0.0 at different DPI settings. A device with low DPI has the acceleration
+applied sooner and with a stronger acceleration factor.
+
+@section ptraccel-touchpad Pointer acceleration on touchpads
+
+Touchpad pointer acceleration uses the @ref ptraccel-linear profile, with a
+constant deceleration factor applied. The user expectation of how much a
+pointer should move in response to finger movement is different to that of a
+mouse device, hence the constant deceleration factor.
+
+@image html ptraccel-touchpad.svg "Pointer acceleration curve for touchpads"
+
+The image above shows the touchpad acceleration profile in comparison to the
+@ref ptraccel-linear. The shape of the curve is identical but vertically squashed.
+
+@section ptraccel-trackpoint Pointer acceleration on trackpoints
+
+Trackpoint pointer acceleration uses the @ref ptraccel-low-dpi profile, with a
+constant deceleration factor taking the place of the DPI settings.
+
+@image html ptraccel-trackpoint.svg "Pointer acceleration curves for trackpoints"
+
+The image above shows the trackpoint acceleration profile in comparison to the
+@ref ptraccel-linear. The constant acceleration factor, usually applied by
+udev, shapes the acceleration profile.
+
+*/

doc/reporting-bugs.dox

@@ -0,0 +1,94 @@
+/**
+@page reporting_bugs Reporting bugs
+
+A new bug can be filed here:
+https://bugs.freedesktop.org/enter_bug.cgi?product=Wayland&component=libinput
+
+When reporting bugs against libinput, please follow the instructions below
+and provide the required data. This will speed up triage, resulting in a
+quicker bugfix.
+
+First, try to identify the bug by reproducing it reliably. The more
+specific a bug description is, the easier it is to fix. The @ref
+libinput-debug-events helper tool can help identify whether the bug is in
+libinput at all. This tool is a direct hook to libinput without a desktop
+stack in between and can thus help to identify whether a bug is in libinput
+or in one of the higher layers. See the @ref libinput-debug-events section
+for information on this tool.
+
+@section triage Required information for triage
+
+When you file a bug, please attach the following information:
+- a virtual description of your input device, see @ref evemu. This is the
+  most important piece of information, do not forget it!
+- the libinput version. Either the package version from your distribution
+  or, when running from git: <tt>git log -n 1 HEAD</tt> or <tt>git describe
+  HEAD</tt>. As a last resort: <tt>libinput-list-devices --version</tt>.
+- the current libinput settings for the device. This is a bit harder to
+  obtain, for now we'll assume you are running X11. The current settings can
+  be obtained with <tt>xinput list-props "your device name"</tt>. Use
+  <tt>xinput list</tt> to obtain the device name.
+- if the device is a touchpad or a pointing stick, the vendor model number
+  of your laptop, and the content of <tt>/sys/class/dmi/id/modalias</tt>.
+- if the device is a touchpad, the physical dimensions of your touchpad in
+  mm
+
+@section evemu Recording devices with evemu
+
+<a href="http://www.freedesktop.org/wiki/Evemu/">evemu</a> records the
+device capabilities together with the event stream from the kernel. On our
+side, this allows us to recreate a virtual device identical to your device
+and re-play the event sequence, hopefully triggering the same bug.
+
+evemu-record takes a <tt>/dev/input/eventX</tt> event node, but without arguments
+it will simply show the list of devices and let you select:
+@code
+$ sudo evemu-record > scroll.evemu
+Available devices:
+/dev/input/event0:	Lid Switch
+/dev/input/event1:	Sleep Button
+/dev/input/event2:	Power Button
+/dev/input/event3:	AT Translated Set 2 keyboard
+/dev/input/event4:	SynPS/2 Synaptics TouchPad
+/dev/input/event5:	Video Bus
+/dev/input/event6:	ELAN Touchscreen
+/dev/input/event10:	ThinkPad Extra Buttons
+/dev/input/event11:	HDA Intel HDMI HDMI/DP,pcm=3
+/dev/input/event12:	HDA Intel HDMI HDMI/DP,pcm=7
+/dev/input/event13:	HDA Intel HDMI HDMI/DP,pcm=8
+/dev/input/event14:	HDA Intel PCH Dock Mic
+/dev/input/event15:	HDA Intel PCH Mic
+/dev/input/event16:	HDA Intel PCH Dock Headphone
+/dev/input/event17:	HDA Intel PCH Headphone
+/dev/input/event18:	Integrated Camera
+/dev/input/event19:	TPPS/2 IBM TrackPoint
+Select the device event number [0-19]:
+@endcode
+
+Select the device that triggers the issue, then reproduce the bug and Ctrl+C
+the process. The resulting recording, ("scroll.evemu" in this example) will
+contain the sequence required to reproduce the bug. If the bug fails to
+reproduce during recording, simply Ctrl+C and restart evemu-record.
+Always start the recording from a neutral state, i.e. without any buttons or
+keys down, with the position of the device in the neutral position, without
+touching the screen/touchpad.
+
+@note The longer the recording, the harder it is to identify the event
+sequence triggering the bug. Please keep the event sequence as short as possible.
+
+To verify that the recording contains the bug, you can replay it on your
+device. For example, to replay the sequence recorded in the example above:
+@code
+$ sudo evemu-play /dev/input/event4 < scroll.evemu
+@endcode
+
+If the bug is triggered by replaying on your device, attach the recording to
+the bug report.
+
+@note libinput does not affect the evemu recording. libinput and evemu talk
+directly to the kernel's device nodes. An evemu recording is not influenced
+by the libinput version or whether a libinput context is currently active.
+
+@dotfile evemu.gv
+
+*/

doc/scrolling.dox

@@ -0,0 +1,106 @@
+/**
+@page scrolling Scrolling
+
+libinput supports three different types of scrolling methods: @ref
+twofinger_scrolling, @ref edge_scrolling and @ref button_scrolling. Some
+devices support multiple methods, though only one can be enabled at a time.
+As a general overview:
+- touchpad devices with physical buttons below the touchpad support edge and
+  two-finger scrolling
+- touchpad devices without physical buttons (@ref clickpad_softbuttons
+  "clickpads") support two-finger scrolling only
+- pointing sticks provide on-button scrolling by default
+- mice and other pointing devices support on-button scrolling but it is not
+  enabled by default
+
+A device may differ from the above based on its capabilities. See
+libinput_device_config_scroll_set_method() for documentation on how to
+switch methods and libinput_device_config_scroll_get_methods() for
+documentation on how to query a device for available scroll methods.
+
+@section horizontal_scrolling Horizontal scrolling
+
+Scroll movements provide vertical and horizontal directions, each
+scroll event contains both directions where applicable, see
+libinput_event_pointer_get_axis_value(). libinput does not provide separate
+toggles to enable or disable horizontal scrolling. Instead, horizontal
+scrolling is always enabled. This is intentional, libinput does not have
+enough context to know when horizontal scrolling is appropriate for a given
+widget. The task of filtering horizontal movements is up to the caller.
+
+@section twofinger_scrolling Two-finger scrolling
+
+The default on two-finger capable touchpads (almost all modern touchpads are
+capable of detecting two fingers). Scrolling is triggered by two fingers
+being placed on the surface of the touchpad, then moving those fingers
+vertically or horizontally.
+
+@image html twofinger-scrolling.svg "Vertical and horizontal two-finger scrolling"
+
+For scrolling to trigger, a built-in distance threshold has to be met but once
+engaged any movement will scroll. In other words, to start scrolling a
+sufficiently large movement is required, once scrolling tiny amounts of
+movements will translate into tiny scroll movements.
+Scrolling in both directions at once is possible by meeting the required
+distance thresholds to enable each direction separately.
+
+Two-finger scrolling requires the touchpad to track both touch points with
+reasonable precision. Unfortunately, some so-called "semi-mt" touchpads can
+only track the bounding box of the two fingers rather than the actual
+position of each finger. In addition, that bounding box usually suffers from
+a low resolution, causing jumpy movement during two-finger scrolling.
+libinput does not provide two-finger scrolling on those touchpads.
+
+@section edge_scrolling Edge scrolling
+
+On some touchpads, edge scrolling is available, triggered by moving a single
+finger along the right edge (vertical scroll) or bottom edge (horizontal
+scroll).
+
+@image html edge-scrolling.svg "Vertical and horizontal edge scrolling"
+
+Due to the layout of the edges, diagonal scrolling is not possible. The
+behavior of edge scrolling using both edges at the same time is undefined.
+
+Edge scrolling overlaps with @ref clickpad_softbuttons. A physical click on
+a clickpad ends scrolling.
+
+@section button_scrolling On-Button scrolling
+
+On-button scrolling converts the motion of a device into scroll events while
+a designated button is held down. For example, Lenovo devices provide a
+<a href="http://en.wikipedia.org/wiki/Pointing_stick">pointing stick</a> that emulates
+scroll events when the trackstick's middle mouse button is held down.
+
+@note On-button scrolling is enabled by default for pointing sticks. This
+prevents middle-button dragging; all motion events while the middle button is
+down are converted to scroll events.
+
+@image html button-scrolling.svg "Button scrolling"
+
+The button may be changed with
+libinput_device_config_scroll_set_button() but must be on the same device as
+the motion events. Cross-device scrolling is not supported but
+for one exception: libinput's @ref t440_support enables the use of the middle
+button for button scrolling (even when the touchpad is disabled).
+
+@section scroll_sources Scroll sources
+
+libinput provides a pointer axis *source* for each scroll event. The
+source can be obtained with the libinput_event_pointer_get_axis_source()
+function and is one of **wheel**, **finger**, or **continuous**. The source
+information lets a caller decide when to implement kinetic scrolling.
+Usually, a caller will process events of source wheel as they come in.
+For events of source finger a caller should calculate the velocity of the
+scroll motion and upon finger release start a kinetic scrolling motion (i.e.
+continue executing a scroll according to some friction factor).
+libinput expects the caller to be in charge of widget handling, the source
+information is thus enough to provide kinetic scrolling on a per-widget
+basis. A caller should cancel kinetic scrolling when the pointer leaves the
+current widget or when a key is pressed.
+
+See the libinput_event_pointer_get_axis_source() for details on the
+behavior of each scroll source.
+
+See also http://who-t.blogspot.com.au/2015/03/libinput-scroll-sources.html
+*/

doc/seats.dox

@@ -1,8 +1,5 @@
-.. _seats:
+/**
-
+@page seats Seats
-==============================================================================
-Seats
-==============================================================================
 
 Each device in libinput is assigned to one seat.
 A seat has two identifiers, the physical name and the logical name. The
@@ -13,15 +10,11 @@ seats as independent device sets. Alternatively, a compositor may limit
 itself to a single logical seat, leaving a second compositor to manage
 devices on the other logical seats.
 
-.. _seats_overview:
+@section Overview
-
-------------------------------------------------------------------------------
-Overview
-------------------------------------------------------------------------------
 
 Below is an illustration of how physical seats and logical seats interact:
 
-.. graphviz:: seats-sketch.gv
+@dotfile seats-sketch.gv
 
 The devices "Foo", "Bar" and "Spam" share the same physical seat and are
 thus available in the same libinput context. Only "Foo" and "Bar" share the
@@ -29,19 +22,15 @@ same logical seat. The device "Egg" is not available in the libinput context
 associated with the physical seat 0.
 
 The above graph is for illustration purposes only. In libinput, a struct
-**libinput_seat** comprises both physical seat and logical seat. From a
+@ref libinput_seat comprises both physical seat and logical seat. From a
 caller's point-of-view the above device layout is presented as:
 
-.. graphviz:: seats-sketch-libinput.gv
+@dotfile seats-sketch-libinput.gv
 
-Thus, devices "Foo" and "Bar" both reference the same struct
+Thus, devices "Foo" and "Bar" both reference the same struct @ref
-**libinput_seat**, all other devices reference their own respective seats.
+libinput_seat, all other devices reference their own respective seats.
 
-.. _seats_and_features:
+@section seats_and_features The effect of seat assignment
-
-------------------------------------------------------------------------------
-The effect of seat assignment
-------------------------------------------------------------------------------
 
 A logical set is interpreted as a group of devices that usually belong to a
 single user that interacts with a computer. Thus, the devices are
@@ -59,27 +48,26 @@ semantically related. This means for devices within the same logical seat:
   two touches down.
 
 libinput provides functions to aid with the above:
-**libinput_event_pointer_get_seat_button_count()**,
+libinput_event_pointer_get_seat_button_count(),
-**libinput_event_keyboard_get_seat_key_count()**, and
+libinput_event_keyboard_get_seat_key_count(), and
-**libinput_event_touch_get_seat_slot()**.
+libinput_event_touch_get_seat_slot().
 
 Internally, libinput counts devices within the same logical seat as related.
 Cross-device features only activate if all required devices are in the same
 logical seat. For example, libinput will only activate the top software
-buttons (see :ref:`t440_support`) if both trackstick and touchpad are assigned
+buttons (see @ref t440_support) if both trackstick and touchpad are assigned
 to the same logical seat.
 
 
-.. _changing_seats:
+@section changing_seats Changing seats
-
-------------------------------------------------------------------------------
-Changing seats
-------------------------------------------------------------------------------
 
 A device may change the logical seat it is assigned to at runtime with
-**libinput_device_set_seat_logical_name()**. The physical seat is immutable and
+libinput_device_set_seat_logical_name(). The physical seat is immutable and
 may not be changed.
 
 Changing the logical seat for a device is equivalent to unplugging the
 device and plugging it back in with the new logical seat. No device state
 carries over across a logical seat change.
+
+
+*/

doc/style/customdoxygen.css

@@ -252,3 +252,4 @@ blockquote {
     margin: 0 24px 0 4px;
     padding: 0 12px 0 16px;
 }
+

doc/style/header.html

@@ -8,7 +8,7 @@
 
         <meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
         <meta name="generator" content="Doxygen $doxygenversion"/>
-
+        
         <script type="text/javascript" src="https://code.jquery.com/jquery-2.1.1.min.js"></script>
 
         <!--BEGIN PROJECT_NAME--><title>$projectname: $title</title><!--END PROJECT_NAME-->
@@ -20,6 +20,8 @@
         $mathjax
         <link href="$relpath^$stylesheet" rel="stylesheet" type="text/css" />
         $extrastylesheet
+
+        <link href="bootstrap.css" rel="stylesheet" type="text/css" />
         <script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.1/js/bootstrap.min.js"></script>
         <script type="text/javascript" src="doxy-boot.js"></script>
     </head>

doc/svg/edge-scrolling.svg

@@ -105,7 +105,7 @@
     <path
        d="m 455.56456,762.87232 c 0,0 -235.01231,1.01015 -235.01231,1.01015"
        id="path3702"
-       style="fill:none;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-start:url(#Arrow1Lstart-4);marker-end:url(#Arrow1Lend-2)" />
+       style="fill:none;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-start:url(#Arrow1Lstart);marker-end:url(#Arrow1Lstart)" />
     <g
        transform="matrix(0.98314313,0.18283763,-0.18283763,0.98314313,132.81621,-12.620089)"
        id="g3663-9">

doc/svg/palm-detection.svg

@@ -36,17 +36,16 @@
      inkscape:pageopacity="0"
      inkscape:pageshadow="2"
      inkscape:window-width="1920"
-     inkscape:window-height="1016"
+     inkscape:window-height="1136"
      id="namedview3477"
      showgrid="false"
      inkscape:zoom="3.5662625"
-     inkscape:cx="180.54059"
+     inkscape:cx="199.35048"
-     inkscape:cy="269.48563"
+     inkscape:cy="156.74673"
      inkscape:window-x="0"
      inkscape:window-y="27"
      inkscape:window-maximized="1"
-     inkscape:current-layer="svg2"
+     inkscape:current-layer="svg2" />
-     inkscape:document-rotation="0" />
   <defs
      id="defs4">
     <marker
@@ -138,8 +137,16 @@
      style="fill:none;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:6, 1;stroke-dashoffset:0;stroke-opacity:1;marker-mid:none;marker-end:url(#Arrow1Lend-2)"
      id="path13492"
      d="m 38.928571,67.914286 c 0,0 3.508205,24.810617 9.642857,57.857144 6.134651,33.04652 23.277202,79.68584 89.642852,90.35714" />
+  <rect
+     style="fill:#000000;fill-opacity:0.3559322;fill-rule:evenodd;stroke:none;stroke-width:3.30527353px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+     id="rect3490"
+     width="65.272476"
+     height="136.21509"
+     x="7.0411549"
+     y="7.0411549" />
   <text
-     style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:0%;font-family:Utopia;-inkscape-font-specification:Utopia;text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"
+     sodipodi:linespacing="100%"
+     style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:100%;font-family:Utopia;-inkscape-font-specification:Utopia;text-align:start;writing-mode:lr-tb;text-anchor:start;fill:#000000;fill-opacity:1;stroke:none"
      xml:space="preserve"
      id="text13874"
      y="63.628628"
@@ -148,8 +155,16 @@
        id="tspan13876"
        y="63.628628"
        x="33.214291">A</tspan></text>
+  <rect
+     style="fill:#000000;fill-opacity:0.3559322;fill-rule:evenodd;stroke:none;stroke-width:3.30527353px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+     id="rect3490-2"
+     width="65.272476"
+     height="136.21509"
+     x="321.23563"
+     y="6.7607527" />
   <text
-     style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:0%;font-family:Utopia;-inkscape-font-specification:Utopia;text-align:start;writing-mode:lr-tb;text-anchor:start;display:inline;fill:#000000;fill-opacity:1;stroke:none"
+     sodipodi:linespacing="100%"
+     style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:100%;font-family:Utopia;-inkscape-font-specification:Utopia;text-align:start;writing-mode:lr-tb;text-anchor:start;display:inline;fill:#000000;fill-opacity:1;stroke:none"
      xml:space="preserve"
      id="text13874-8"
      y="98.748993"
@@ -168,7 +183,8 @@
      id="layer1"
      style="display:inline" />
   <text
-     style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:0%;font-family:Utopia;-inkscape-font-specification:Utopia;text-align:start;writing-mode:lr-tb;text-anchor:start;display:inline;fill:#000000;fill-opacity:1;stroke:none"
+     sodipodi:linespacing="100%"
+     style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:100%;font-family:Utopia;-inkscape-font-specification:Utopia;text-align:start;writing-mode:lr-tb;text-anchor:start;display:inline;fill:#000000;fill-opacity:1;stroke:none"
      xml:space="preserve"
      id="text13874-8-1"
      y="46.009491"
@@ -177,6 +193,17 @@
        id="tspan13876-7-9"
        y="46.009491"
        x="342.27759">C</tspan></text>
+  <text
+     sodipodi:linespacing="100%"
+     style="font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:12px;line-height:100%;font-family:Utopia;-inkscape-font-specification:Utopia;text-align:start;writing-mode:lr-tb;text-anchor:start;display:inline;fill:#000000;fill-opacity:1;stroke:none"
+     xml:space="preserve"
+     id="text13874-8-1-4"
+     y="215.65927"
+     x="37.970726"><tspan
+       style="font-size:18px;font-family:Arial;-inkscape-font-specification:Arial"
+       id="tspan13876-7-9-5"
+       y="215.65927"
+       x="37.970726">D</tspan></text>
   <circle
      style="fill:#000000;fill-opacity:1;stroke:none;stroke-opacity:1"
      id="path4401"
@@ -184,18 +211,11 @@
      cy="24.53549"
      r="4.0658817"
      transform="scale(-1,1)" />
-  <rect
+  <circle
-     width="248.87633"
+     style="fill:#000000;fill-opacity:1;stroke:none;stroke-opacity:1"
-     height="6.8111157"
+     id="path4401-9"
-     x="72.35215"
+     cx="-36.452721"
-     y="7.1355872"
+     cy="194.8819"
-     id="rect4355"
+     r="4.0658817"
-     style="color:#000000;display:inline;overflow:visible;visibility:visible;fill:#ff0000;fill-opacity:0.32017547;fill-rule:nonzero;stroke:none;stroke-width:1.11822701;marker:none;enable-background:accumulate" />
+     transform="scale(-1,1)" />
-  <rect
-     y="7.1355872"
-     x="72.35215"
-     height="6.8111153"
-     width="248.87634"
-     id="rect4353"
-     style="fill:#000000;fill-opacity:0.3559322;fill-rule:evenodd;stroke:none;stroke-width:1.44321382px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
 </svg>

doc/svg/ptraccel-low-dpi.svg

@@ -1,7 +1,7 @@
 <?xml version="1.0" encoding="utf-8"  standalone="no"?>
 <!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN"
  "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
-<svg
+<svg 
  width="600" height="480"
  viewBox="0 0 600 480"
  xmlns="http://www.w3.org/2000/svg"
@@ -3745,3 +3745,4 @@
 </g>
 </g>
 </svg>
+

doc/svg/software-buttons.svg

@@ -41,8 +41,8 @@
      id="namedview4312"
      showgrid="false"
      inkscape:zoom="0.57798581"
-     inkscape:cx="842.57758"
+     inkscape:cx="1134.9723"
-     inkscape:cy="-74.644166"
+     inkscape:cy="-71.183873"
      inkscape:window-x="0"
      inkscape:window-y="27"
      inkscape:window-maximized="1"
@@ -106,7 +106,7 @@
      id="rect2858-7"
      style="color:#000000;display:inline;overflow:visible;visibility:visible;fill:#b3b3b3;fill-opacity:1;fill-rule:nonzero;stroke:#000000;stroke-width:5.19376326;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker:none;enable-background:accumulate" />
   <g
-     transform="matrix(0.79657897,0.11742288,-0.14814182,0.631399,749.8966,-336.99044)"
+     transform="matrix(0.79657897,0.11742288,-0.14814182,0.631399,665.11943,-345.64117)"
      id="g3663-9-8">
     <path
        d="m 388.57143,893.79076 -57.14285,-130 c 0,0 -30.0247,-58.84827 4.28571,-70.00001 27.07438,-8.79984 37.32196,9.59496 40,14.64286 27.54455,51.91936 84.64285,173.21429 84.64285,173.21429 l -0.71428,0 -71.07143,12.14286 z"
@@ -124,6 +124,30 @@
        style="color:#000000;display:inline;overflow:visible;visibility:visible;opacity:0.92000002;fill:#ffe6d5;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;marker:none;enable-background:accumulate"
        inkscape:connector-curvature="0" />
   </g>
+  <g
+     id="g4656"
+     transform="translate(-0.31997204,0.28487182)">
+    <g
+       id="g4639">
+      <path
+         inkscape:connector-curvature="0"
+         style="fill:none;stroke:#000000;stroke-width:0.72135597px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+         id="path2820-0-5"
+         d="m 970.15914,263.93369 32.58666,-97.47985 c 0,0 12.2603,-46.32869 38.5506,-33.925 20.7457,9.78778 17.4301,24.72594 16.4399,28.75425 -10.1846,41.43257 -30.105,105.84033 -30.105,105.84033 l -0.428,-0.37827 z"
+         sodipodi:nodetypes="ccssccc" />
+      <path
+         inkscape:connector-curvature="0"
+         style="color:#000000;display:inline;overflow:visible;visibility:visible;fill:#ffccaa;fill-opacity:1;fill-rule:nonzero;stroke:#000000;stroke-width:0.00144271;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;marker:none;enable-background:accumulate"
+         id="path2824-9-3"
+         d="m 987.16367,214.84092 c 8.97014,-26.84686 16.75933,-50.19953 17.30923,-51.89481 3.8651,-11.91483 10.3862,-22.76212 16.5622,-27.54951 6.8496,-5.30946 13.8243,-5.75615 21.9108,-1.40323 3.7999,2.04543 6.0302,3.61208 8.2265,5.77836 2.5214,2.487 3.6881,4.17002 5.1008,7.35828 1.3655,3.08181 1.9391,7.11725 1.5051,10.58923 -0.597,4.77663 -10.2821,40.41668 -20.9931,77.25236 -7.7256,26.56907 -9.371,31.11182 -9.5644,31.10964 -0.1479,-0.002 -55.70067,-1.83937 -56.08626,-2.18017 -0.16723,-0.1478 6.29681,-19.93218 16.02913,-49.06015 z"
+         sodipodi:nodetypes="scsssscsccs" />
+      <path
+         inkscape:connector-curvature="0"
+         style="color:#000000;display:inline;overflow:visible;visibility:visible;opacity:0.92000002;fill:#ffe6d5;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.2;marker:none;enable-background:accumulate"
+         id="path2824-7-8-8"
+         d="m 1008.3595,164.57667 c 3.8651,-11.91483 7.6606,-19.35039 13.8366,-24.13778 6.8495,-5.30946 12.0833,-5.57765 20.1698,-1.22474 9.3061,4.73331 12.9905,9.62271 11.9094,19.03362 -6.3459,19.3209 -6.9054,22.12042 -9.2168,26.32727 -0.1479,-0.002 -33.6651,-14.70742 -35.0296,-15.23839 -1.4035,-0.54616 -1.8884,-3.70289 -1.6694,-4.75998 z" />
+    </g>
+  </g>
   <g
      transform="translate(-386.56163,2.2570367)"
      id="g4656-3">

doc/svg/twofinger-scrolling.svg

@@ -127,7 +127,7 @@
       <path
          d="m 400.17949,657.93904 c 0,0 -235.01231,1.01015 -235.01231,1.01015"
          id="path3702"
-         style="fill:none;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-start:url(#Arrow1Lstart-4);marker-end:url(#Arrow1Lend-2)" />
+         style="fill:none;stroke:#000000;stroke-width:1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-opacity:1;stroke-dasharray:none;marker-start:url(#Arrow1Lstart);marker-end:url(#Arrow1Lstart)" />
       <g
          transform="matrix(0.98196551,0.12493315,-0.14261338,1.1209308,78.621186,-191.74129)"
          id="g3663">

doc/t440-support.dox

@@ -1,43 +1,29 @@
-.. _t440_support:
+/**
+@page t440_support Lenovo *40 series touchpad support
 
-==============================================================================
+The Lenovo *40 series emulates trackstick buttons on the top part of the
-Lenovo \*40 series touchpad support
-==============================================================================
-
-The Lenovo \*40 series emulates trackstick buttons on the top part of the
 touchpads.
 
-.. _t440_support_overview:
+@section t440_support_overview Overview
 
-------------------------------------------------------------------------------
+The Lenovo *40 series introduced a new type of touchpad. Previously, all
-Overview
-------------------------------------------------------------------------------
-
-The Lenovo \*40 series introduced a new type of touchpad. Previously, all
 laptops had a separate set of physical buttons for the
-`trackstick <http://en.wikipedia.org/wiki/Pointing_stick>`_. This
+<a href="http://en.wikipedia.org/wiki/Pointing_stick">trackstick</a>. This
 series removed these buttons, relying on a software emulation of the top
 section of the touchpad. This is visually marked on the trackpad itself,
 and clicks can be triggered by pressing the touchpad down with a finger in
 the respective area:
 
-.. figure:: top-software-buttons.svg
+@image html top-software-buttons.svg "Left, right and middle-button click with top software button areas"
-    :align: center
-
-    Left, right and middle-button click with top software button areas
 
 This page only covers the top software buttons, the bottom button behavior
-is covered in :ref:`Clickpad software buttons <clickpad_softbuttons>`.
+is covered in @ref clickpad_softbuttons "Clickpad software buttons".
 
-Clickpads with a top button area are marked with the
+Clickpads with a top button area are marked with the <a
-`INPUT_PROP_TOPBUTTONPAD <https://www.kernel.org/doc/Documentation/input/event-codes.txt>`_
+href="https://www.kernel.org/doc/Documentation/input/event-codes.txt">INPUT_PROP_TOPBUTTONPAD</a>
 property.
 
-.. _t440_support_btn_size:
+@section t440_support_btn_size Size of the buttons
-
-------------------------------------------------------------------------------
-Size of the buttons
-------------------------------------------------------------------------------
 
 The size of the buttons matches the visual markings on this touchpad.
 The width of the left and right buttons is approximately 42% of the
@@ -49,23 +35,16 @@ measurements of button presses showed that the size of the buttons needs to
 be approximately 10mm high to work reliable (especially when using the
 thumb to press the button).
 
-.. _t440_support_btn_behavior:
+@section t440_support_btn_behavior Button behavior
-
-------------------------------------------------------------------------------
-Button behavior
-------------------------------------------------------------------------------
 
 Movement in the top button area does not generate pointer movement. These
 buttons are not replacement buttons for the bottom button area but have
 their own behavior. Semantically attached to the trackstick device, libinput
 re-routes events from these buttons to appear through the trackstick device.
 
-
+@dot
-.. graphviz::
+digraph top_button_routing
-
+{
-
-    digraph top_button_routing
-    {
 	rankdir="LR";
 	node [shape="box";]
 
@@ -91,12 +70,12 @@ re-routes events from these buttons to appear through the trackstick device.
 	touchpad -> libinput_tp [color="red4"]
 
 	events_tp [label="other touchpad events"];
-	events_topbutton [label="top software button events"];
+	events_topbutton [label="top sofware button events"];
 
 	libinput_tp -> events_tp [arrowhead="none"]
 	libinput_ts -> events_topbutton [color="red4"]
-    }
+}
-
+@enddot
 
 
 The top button areas work even if the touchpad is disabled but will be
@@ -106,23 +85,20 @@ and must be lifted to generate future buttons.  Likewise, movement into the
 top button area does not trigger button events, a click has to start inside
 this area to take effect.
 
-.. _t440_support_identification:
+@section t440_support_identification Kernel support
-
-------------------------------------------------------------------------------
-Kernel support
-------------------------------------------------------------------------------
 
 The firmware on the first generation of touchpads providing top software
 buttons is buggy and announces wrong ranges.
-`Kernel patches <https://lkml.org/lkml/2014/3/7/722>`_ are required;
+<a href="https://lkml.org/lkml/2014/3/7/722">Kernel patches</a> are required;
 these fixes are available in kernels 3.14.1, 3.15 and later but each
 touchpad needs a separate fix.
 
 The October 2014 refresh of these laptops do not have this firmware bug
 anymore and should work without per-device patches, though
-`this kernel commit <http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=02e07492cdfae9c86e3bd21c0beec88dbcc1e9e8>`_
+<a href="http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=02e07492cdfae9c86e3bd21c0beec88dbcc1e9e8">this kernel commit</a> is required.
-is required.
 
-For a complete list of supported touchpads check
+For a complete list of supported touchpads check <a
-`the kernel source <http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/input/mouse/synaptics.c>`_
+href="http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/input/mouse/synaptics.c">the
-(search for "topbuttonpad_pnp_ids").
+kernel source</a> (search for "topbuttonpad_pnp_ids").
+
+*/

doc/tapping.dox

@@ -0,0 +1,66 @@
+/**
+@page tapping Tap-to-click behaviour
+
+"Tapping" or "tap-to-click" is the name given to the behavior where a short
+finger touch down/up sequence maps into a button click. This is most
+commonly used on touchpads, but may be available on other devices.
+
+libinput implements tapping for one, two, and three fingers, where supported
+by the hardware, and maps those taps into a left, right, and middle button
+click, respectively. Not all devices support three fingers, libinput will
+support tapping up to whatever is supported by the hardware. libinput does
+not support four-finger taps or any tapping with more than four fingers,
+even though some hardware can distinguish between that many fingers.
+
+Tapping is **disabled** by default, see [this
+commit](http://cgit.freedesktop.org/wayland/libinput/commit/?id=2219c12c3aa45b80f235e761e87c17fb9ec70eae)
+because:
+- if you don't know that tapping is a thing (or enabled by default), you get
+  spurious button events that make the desktop feel buggy.
+- if you do know what tapping is and you want it, you usually know where to
+  enable it, or at least you can search for it.
+
+Tapping can be enabled on a per-device basis. See
+libinput_device_config_tap_set_enabled() for details.
+
+@section tapndrag Tap-and-drag 
+
+libinput also supports "tap-and-drag" where a tap immediately followed by a
+finger down and that finger being held down emulates a button press. Moving
+the finger around can thus drag the selected item on the screen.
+
+Optional is a feature called "drag lock". With drag lock disabled, lifting
+the finger will stop any drag process. When enabled, libinput will ignore a
+finger up event during a drag process, provided the finger is set down again
+within a implementation-specific timeout. Drag lock can be enabled and
+disabled with libinput_device_config_tap_set_drag_lock_enabled().
+
+@image html tap-n-drag.svg "Tap-and-drag process"
+
+The above diagram explains the process, a tap (a) followed by a finger held
+down (b) starts the drag process and logically holds the left mouse button
+down. A movement of the finger (c) will drag the selected item until the
+finger is released (e). If needed and drag lock is enabled, the finger's
+position can be reset by lifting and quickly setting it down again on the
+touchpad (d). This will be interpreted as continuing move and is especially
+useful on small touchpads or with slow pointer acceleration.
+If drag lock is enabled, the release of the mouse buttons after the finger
+release (e) is triggered by a timeout. To release the button immediately,
+simply tap again (f).
+
+If two fingers are supported by the hardware, a second finger can be used to
+drag while the first is held in-place.
+
+@section tap_constraints Constraints while tapping
+
+A couple of constraints apply to the contact to be converted into a press, the most common ones are:
+- the touch down and touch up must happen within an implementation-defined timeout
+- if a finger moves more than an implementation-defined distance while in contact, it's not a tap
+- tapping within @ref clickpad_softbuttons "clickpad software buttons" may not trigger an event
+- a tap not meeting required pressure thresholds can be ignored as accidental touch
+- a tap exceeding certain pressure thresholds can be ignored (see @ref
+  palm_detection)
+- a tap on the edges of the touchpad can usually be ignored (see @ref
+  palm_detection)
+
+*/

doc/test-suite.dox

@@ -0,0 +1,92 @@
+/**
+@page test-suite libinput test suite
+
+The libinput test suite is based on
+[Check](http://check.sourceforge.net/doc/check_html/) and runs automatically
+during `make check`. Check itself is wrapped into a libinput-specific test
+suite called *litest*. Tests are found in `$srcdir/test/`, the test binaries are
+prefixed with `test-` and can be run individually. 
+
+@section test-config X.Org config to avoid interference
+
+uinput devices created by the test suite are usually recognised by X as
+input devices. All events sent through these devices will generate X events
+and interfere with your desktop.
+
+Copy the file `$srcdir/test/50-litest.conf` into your `/etc/X11/xorg.conf.d`
+and restart X. This will ignore any litest devices and thus not interfere
+with your desktop.
+
+@section test-root Permissions required to run tests
+
+Most tests require the creation of uinput devices and access to the
+resulting `/dev/input/eventX` nodes. Some tests require temporary udev rules.
+<b>This usually requires the tests to be run as root</b>.
+
+@section test-filtering Selective running of tests
+
+litest's tests are grouped by test groups and devices. A test group is e.g.
+"touchpad:tap" and incorporates all tapping-related tests for touchpads.
+Each test function is (usually) run with one or more specific devices.
+The `--list` commandline argument shows the list of suites and tests.
+@code
+$ ./test/test-device --list
+device:wheel:
+	wheel only
+	blackwidow
+device:invalid devices:
+	no device
+device:group:
+	no device
+	logitech trackball
+	MS surface cover
+	mouse_roccat
+	wheel only
+	blackwidow
+...
+@endcode
+
+In the above example, the "device:wheel" suite is run for the "wheel only" and
+the "blackwidow" device. Both devices are automatically instantiated through
+uinput by litest. The "no device" entry signals that litest does not
+instantiate a uinput device for a specific test (though the test itself may
+instantiate one).
+
+The `--filter-test` argument enables selective running of tests through
+basic shell-style function name matching. For example:
+
+@code
+$ ./test/test-touchpad --filter-test="*1fg_tap*"
+@endcode
+
+The `--filter-device` argument enables selective running of tests through
+basic shell-style device name matching. The device names matched are the
+litest-specific shortnames, see the output of `--list`. For example:
+
+@code
+$ ./test/test-touchpad --filter-device="synaptics*"
+@endcode
+
+The `--filter-group` argument enables selective running of test groups
+through basic shell-style test group matching. The test groups matched are
+litest-specific test groups, see the output of `--list`. For example:
+
+@code
+$ ./test/test-touchpad --filter-group="touchpad:*hover*"
+@endcode
+
+The `--filter-device` and `--filter-group` arguments can be combined with
+`--list` to show which groups and devices will be affected.
+
+@section test-verbosity Controlling test output
+
+Each test supports the `--verbose` commandline option to enable debugging
+output, see libinput_log_set_priority() for details. The `LITEST_VERBOSE`
+environment variable, if set, also enables verbose mode.
+
+@code
+$ ./test/test-device --verbose
+$ LITEST_VERBOSE=1 make check
+@endcode
+
+*/

doc/tools.dox

@@ -0,0 +1,102 @@
+/**
+@page tools Helper tools
+
+libinput provides a couple of tools to query state and events. Two of these
+tools are usually installed, others are @ref developer_tools only.
+
+@section user_tools User tools
+
+libinput ships with two tools to gather information about devices:
+@ref libinput-list-devices and @ref libinput-debug-events. Both tools must
+be run as root to have access to the kernel's @c /dev/input/event* device
+files.
+
+@subsection libinput-list-devices
+
+The libinput-list-devices tool shows information about devices recognized by
+libinput and can help identifying why a device behaves different than
+expected. For example, if a device does not show up in the output, it is not
+a supported input device.
+
+@verbatim
+$ sudo libinput-list-devices
+[...]
+Device:           SynPS/2 Synaptics TouchPad
+Kernel:           /dev/input/event4
+Group:            9
+Seat:             seat0, default
+Size:             97.33x66.86mm
+Capabilities:     pointer 
+Tap-to-click:     disabled
+Tap drag lock:    disabled
+Left-handed:      disabled
+Nat.scrolling:    disabled
+Middle emulation: n/a
+Calibration:      n/a
+Scroll methods:   *two-finger 
+Click methods:    *button-areas clickfinger 
+[...]
+@endverbatim
+
+The above listing shows example output for a touchpad. The
+libinput-list-devices tool lists general information about the device (the
+kernel event node) but also the configuration options. If an option is
+"n/a" it does not exist on this device. Otherwise, the tool will show the
+default configuration for this device, for options that have more than a
+binary state all available options are listed, with the default one prefixed
+with an asterisk (*). In the example above, the default click method is
+button-areas but clickinger is available.
+
+Note that the default configuration may differ from the configuration
+applied by the desktop environment.
+
+@note This tool is intended to be human-readable and may change its output
+at any time.
+
+@subsection libinput-debug-events
+This is an installed version of the @ref event-debug developer tool. It
+prints events from devices and can help to identify why a device behaves
+different than expected.
+
+@verbatim
+$ sudo libinput-debug-events --enable-tapping --set-click-method=clickfinger
+@endverbatim
+
+See the man page or the @c --help output for information about the available
+options.
+
+@section developer_tools Developer tools
+
+The two most common tools used by developers are @ref event-debug and @ref
+event-gui.
+
+@subsection event-debug
+This is the in-tree version of the @ref libinput-debug-events tool and is
+linked to allow for easy debugging (i.e. it avoids libtool shenanigans). The
+code is the same. For debugging, run it against a single device only and
+enable the --verbose flag. This will print the various state machine
+transitions in addition to the events.
+
+@verbatim
+$ sudo ./tools/event-debug --verbose --device /dev/input/event3
+@endverbatim
+
+See the @c --help output for information about the available options.
+
+@subsection event-gui
+
+A simple GTK-based graphical tool that shows the behavior and location of
+touch events, pointer motion, scroll axes and gestures. Since this tool
+gathers data directly from libinput, it is thus suitable for
+pointer-acceleration testing.
+
+@verbatim
+$ sudo ./tools/event-gui
+@endverbatim
+
+See the @c --help output for information about the available options.
+
+@note The @c --grab flag puts an exclusive @c EVIOCGRAB on the device to
+avoid interference with the desktop while testing.
+
+*/

doc/touchpads.dox

@@ -0,0 +1,162 @@
+/**
+@page touchpads Touchpads
+
+This page provides an outline of touchpad devices. Touchpads aren't simply
+categorised into a single type, instead they have a set of properties, a
+combination of number of physical buttons, multitouch support abilities and
+other properties.
+
+@section touchpads_buttons Number of buttons
+
+@subsection touchapds_buttons_phys Physically separate buttons
+
+Touchpads with physical buttons usually provide two buttons, left and right.
+A few touchpads with three buttons exist, and Apple used to have touchpads
+with a single physical buttons until ca 2008. Touchpads with only two
+buttons require the software stack to emulate a middle button. libinput does
+this when both buttons are pressed simultaneously.
+
+Note that many Lenovo laptops provide a pointing stick above the touchpad.
+This pointing stick has a set of physical buttons just above the touchpad.
+While many users use those as substitute touchpad buttons, they logically
+belong to the pointing stick. The *40 and *50 series are an exception here,
+the former had no physical buttons on the touchpad and required the top
+section of the pad to emulate pointing stick buttons, the *50 series has
+physical buttons but they are wired to the touchpads. The kernel re-routes
+those buttons through the trackstick device. See @ref t440_support for more
+information.
+
+@subsection touchpads_buttons_clickpads Clickpads
+
+Clickpads are the most common type of touchpads these days. A Clickpad has
+no separate physical buttons, instead the touchpad itself is clickable as a
+whole, i.e. a user presses down on the touch area and triggers a physical
+click. Clickpads thus only provide a single button, everything else needs to
+be software-emulated. See @ref clickpad_softbuttons for more information.
+
+Clickpads are labelled by the kernel with the @c INPUT_PROP_BUTTONPAD input
+property.
+
+@subsection touchpads_buttons_forcepads Forcepads
+
+Forcepads are Clickpads without a physical button underneath the hardware.
+They provide pressure and may have a vibration element that is
+software-controlled. This element can simulate the feel of a physical
+click or be co-opted for other tasks.
+
+
+@section touchpads_touch Touch capabilities
+
+Virtually all touchpads available now can <b>detect</b> multiple fingers on
+the touchpad, i.e. provide information on how many fingers are on the
+touchpad. The touch capabilities described here specify how many fingers a
+device can <b>track</b>, i.e. provide reliable positional information for. 
+In the kernel each finger is tracked in a so-called "slot", the number of
+slots thus equals the number of simultaneous touches a device can track.
+
+@subsection touchapds_touch_st Single-touch touchpads
+
+Single-finger touchpads can track a single touchpoint. Most single-touch
+touchpads can also detect three fingers on the touchpad, but no positional
+information is provided for those. In libinput, these touches are termed
+"fake touches". The kernel sends @c BTN_TOOL_DOUBLETAP, @c
+BTN_TOOL_TRIPLETAP, @c BTN_TOOL_QUADTAP and @c BTN_TOOL_QUINTTAP events when
+multiple fingers are detected.
+
+@subsection touchpads_touch_mt Pure multi-touch touchpads
+
+Pure multi-touch touchpads are those that can track, i.e. identify the
+location of all fingers on the touchpad. Apple's touchpads support 16
+touches, others support 5 touches like the Synaptics touchpads when using
+SMBus.
+
+These touchpads usually also provide extra information. Apple touchpads
+provide an ellipse and the orientation of the ellipse for each touch point.
+Other touchpads provide a pressure value for each touch point (see @ref
+touchpads_pressure_handling).
+
+Note that the kernel sends @c BTN_TOOL_DOUBLETAP, @c
+BTN_TOOL_TRIPLETAP, @c BTN_TOOL_QUADTAP and @c BTN_TOOL_QUINTTAP events for
+all touches for backwards compatibility. libinput ignores these events if
+the touchpad can track touches correctly.
+
+@subsection touchpads_touch_partial_mt Partial multi-touch touchpads
+
+The vast majority of touchpads fall into this category, the half-way
+point between single-touch and pure multi-touch. These devices can track N
+fingers, but detect more than N. For example, when using the serial
+protocol, Synaptics touchpads can track two fingers but may detect up to
+five.
+
+The number of slots may limit which features are available in libinput.
+Any device with two slots can support two-finger scrolling, but @ref
+thumb-detection or @ref palm_detection may be limited if only two slots are
+available.
+
+@subsection touchpads_touch_semi_mt Semi-mt touchpads
+
+A sub-class of partial multi-touch touchpads. These touchpads can
+technically detect two fingers but the location of both is limited to the
+bounding box, i.e. the first touch is always the top-left one and the second
+touch is the bottom-right one. Coordinates jump around as fingers move past
+each other.
+
+Many semi-mt touchpads also have a lower resolution for the second touch, or
+both touches. This may limit some features such as @ref gestures or
+@ref scrolling.
+
+Semi-mt are labelled by the kernel with the @c INPUT_PROP_SEMI_MT input
+property.
+
+@section touchpads_mis Other touchpad properties
+
+@subsection touchpads_external External touchpads
+
+External touchpads are USB or Bluetooth touchpads not in a laptop chassis,
+e.g. Apple Magic Trackpad or the Logitech T650. These are usually @ref
+touchpads_buttons_clickpads the biggest difference is that they can be
+removed or added at runtime. 
+
+One interaction method that is only possible on external touchpads is a
+thumb resting on the very edge/immediately next to the touchpad. On the far
+edge, touchpads don't always detect the finger location so clicking with a
+thumb barely touching the edge makes it hard or impossible to figure out
+which software button area the finger is on.
+
+These touchpads also don't need @ref palm_detection - since they're not
+located underneath the keyboard, accidental palm touches are a non-issue.
+
+@subsection touchpads_pressure_handling Touchpads pressure handling
+
+Pressure is usually directly related to contact area. Human fingers flatten
+out as the pressure on the pad increases, resulting in a bigger contact area
+and the firmware then calculates that back into a pressure reading.
+
+libinput uses pressure to detect accidental palm contact and thumbs, though
+pressure data is often device-specific and unreliable.
+
+@subsection touchpads_circular Circular touchpads
+
+Only listed for completeness, circular touchpads have not been used in
+laptops for a number of years. These touchpad shaped in an ellipse or
+straight.
+
+@subsection touchpads_tablets Graphics tablets
+
+Touch-capable graphics tablets are effectively external touchpads, with two
+differentiators: they are larger than normal touchpads and they have no
+regular touchpad buttons. They either work like a @ref
+touchpads_buttons_forcepads Forcepad, or rely on interaction methods that
+don't require buttons (like @ref tapping). Since the physical device is
+shared with the pen input, some touch arbitration is required to avoid touch
+input interfering when the pen is in use.  
+
+@subsection touchpads_edge_zone Dedicated edge scroll area
+
+Before @ref twofinger_scrolling became the default scroll method, some
+touchpads provided a marking on the touch area that designates the
+edge to be used for scrolling. A finger movement in that edge zone should
+trigger vertical motions. Some touchpads had markers for a horizontal
+scroll area too at the bottom of the touchpad.
+*/
+

doc/user/404.rst

@@ -1,9 +0,0 @@
-:orphan:
-
-===
-404
-===
-
-This page has permanently moved, probably to `<@TARGET@>`_
-
-This placeholder page will be removed soon.

doc/user/absolute-axes.rst

@@ -1,144 +0,0 @@
-.. _absolute_axes:
-
-==============================================================================
-Absolute axes
-==============================================================================
-
-Devices with absolute axes are those that send positioning data for an axis in
-a device-specific coordinate range, defined by a minimum and a maximum value.
-Compare this to relative devices (e.g. a mouse) that can only detect
-directional data, not positional data.
-
-libinput supports three types of devices with absolute axes:
-
- - multi-touch screens
- - single-touch screens
- - :ref:`graphics tablets <tablet-support>`
-
-Touchpads are technically absolute devices but libinput converts the axis values
-to directional motion and posts events as relative events. Touchpads do not count
-as absolute devices in libinput.
-
-For all absolute devices in libinput, the default unit for x/y coordinates is
-in mm off the top left corner on the device, or more specifically off the
-device's sensor. If the device is physically rotated from its natural
-position and this rotation was communicated to libinput (e.g. by setting
-the device left-handed),
-the coordinate origin is the top left corner in the current rotation.
-
-.. _absolute_axes_handling:
-
-------------------------------------------------------------------------------
-Handling of absolute coordinates
-------------------------------------------------------------------------------
-
-In most use-cases, absolute input devices are mapped to a single screen. For
-direct input devices such as touchscreens the aspect ratio of the screen and
-the device match. Mapping the input device position to the output position is
-thus a simple mapping between two coordinates. libinput provides the API for
-this with
-
-- **libinput_event_pointer_get_absolute_x_transformed()** for pointer events
-- **libinput_event_touch_get_x_transformed()** for touch events
-
-libinput's API only provides the call to map into a single coordinate range.
-If the coordinate range has an offset, the compositor is responsible for
-applying that offset after the mapping. For example, if the device is mapped
-to the right of two outputs, add the output offset to the transformed
-coordinate.
-
-.. _absolute_axes_nores:
-
-------------------------------------------------------------------------------
-Devices without x/y resolution
-------------------------------------------------------------------------------
-
-An absolute device that does not provide a valid resolution is considered
-buggy and must be fixed in the kernel. Some touchpad devices do not
-provide resolution, those devices are correctly handled within libinput
-(touchpads are not absolute devices, as mentioned above).
-
-.. _calibration:
-
-------------------------------------------------------------------------------
-Calibration of absolute devices
-------------------------------------------------------------------------------
-
-Absolute devices may require calibration to map precisely into the output
-range required. This is done by setting a transformation matrix, see
-**libinput_device_config_calibration_set_matrix()** which is applied to
-each input coordinate.
-
-.. math::
-    \begin{pmatrix}
-     cos\theta & -sin\theta & xoff \\
-     sin\theta &  cos\theta & yoff \\
-     0   & 0    & 1
-    \end{pmatrix} \begin{pmatrix}
-    x \\ y \\ 1
-    \end{pmatrix}
-
-:math:`\theta` is the rotation angle. The offsets :math:`xoff` and :math:`yoff` are
-specified in device dimensions, i.e. a value of 1 equals one device width or
-height. Note that rotation applies to the device's origin, rotation usually
-requires an offset to move the coordinates back into the original range.
-
-The most common matrices are:
-
-- 90 degree clockwise:
-     .. math::
-         \begin{pmatrix}
-          0 & -1 & 1 \\
-          1 & 0 & 0 \\
-          0 & 0 & 1
-         \end{pmatrix}
-- 180 degree clockwise:
-     .. math::
-         \begin{pmatrix}
-          -1 & 0 & 1 \\
-          0 & -1 & 1 \\
-          0 & 0 & 1
-         \end{pmatrix}
-- 270 degree clockwise:
-     .. math::
-         \begin{pmatrix}
-          0 & 1 & 0 \\
-          -1 & 0 & 1 \\
-          0 & 0 & 1
-         \end{pmatrix}
-- reflection along y axis:
-     .. math::
-         \begin{pmatrix}
-          -1 & 0 & 1 \\
-          1 & 0 & 0 \\
-          0 & 0 & 1
-         \end{pmatrix}
-
-See Wikipedia's
-`Transformation Matrix article <http://en.wikipedia.org/wiki/Transformation_matrix>`_
-for more information on the matrix maths. See
-**libinput_device_config_calibration_get_default_matrix()** for how these
-matrices must be supplied to libinput.
-
-Once applied, any x and y axis value has the calibration applied before it
-is made available to the caller. libinput does not provide access to the
-raw coordinates before the calibration is applied.
-
-.. _absolute_axes_nonorm:
-
-------------------------------------------------------------------------------
-Why x/y coordinates are not normalized
-------------------------------------------------------------------------------
-
-x/y are not given in :ref:`normalized coordinates <motion_normalization>`
-([0..1]) for one simple reason: the aspect ratio of virtually all current
-devices is something other than 1:1. A normalized axes thus is only useful to
-determine that the stylus is e.g. at 78% from the left, 34% from the top of
-the device. Without knowing the per-axis resolution, these numbers are
-meaningless. Worse, calculation based on previous coordinates is simply wrong:
-a movement from 0/0 to 50%/50% is not a 45-degree line.
-
-This could be alleviated by providing resolution and information about the
-aspect ratio to the caller. Which shifts processing and likely errors into the
-caller for little benefit. Providing the x/y axes in mm from the outset
-removes these errors.

doc/user/absolute-coordinate-ranges.rst

@@ -1,153 +0,0 @@
-.. _absolute_coordinate_ranges:
-
-==============================================================================
-Coordinate ranges for absolute axes
-==============================================================================
-
-libinput requires that all touchpads provide a correct axis range and
-resolution. These are used to enable or disable certain features or adapt
-the interaction with the touchpad. For example, the software button area is
-narrower on small touchpads to avoid reducing the interactive surface too
-much. Likewise, palm detection works differently on small touchpads as palm
-interference is less likely to happen.
-
-Touchpads with incorrect axis ranges generate error messages
-in the form:
-<blockquote>
-Axis 0x35 value 4000 is outside expected range [0, 3000]
-</blockquote>
-
-This error message indicates that the ABS_MT_POSITION_X axis (i.e. the x
-axis) generated an event outside the expected range of 0-3000. In this case
-the value was 4000.
-This discrepancy between the coordinate range the kernels advertises vs.
-what the touchpad sends can be the source of a number of perceived
-bugs in libinput.
-
-.. _absolute_coordinate_ranges_fix:
-
-------------------------------------------------------------------------------
-Measuring and fixing touchpad ranges
-------------------------------------------------------------------------------
-
-To fix the touchpad you need to:
-
-#. measure the physical size of your touchpad in mm
-#. run the ``libinput measure touchpad-size`` tool
-#. verify the hwdb entry provided by this tool
-#. test locally
-#. send a patch to the `systemd project <https://github.com/systemd/systemd>`_.
-
-Detailed explanations are below.
-
-The ``libinput measure touchpad-size`` tool is an interactive tool. It must
-be called with the physical dimensions of the touchpad in mm. In the example
-below, we use 100mm wide and 55mm high. The tool will find the touchpad device
-automatically.
-
-::
-
-     $> sudo libinput measure touchpad-size 100x55
-     Using "Touchpad SynPS/2 Synaptics TouchPad": /dev/input/event4
-
-     Kernel specified touchpad size: 99.7x75.9mm
-     User specified touchpad size:   100.0x55.0mm
-
-     Kernel axis range:   x [1024..5112], y [2024..4832]
-     Detected axis range: x [   0..   0], y [   0..   0]
-
-     Move one finger along all edges of the touchpad
-     until the detected axis range stops changing.
-
-     ...
-
-Move the finger around until the detected axis range matches the data sent
-by the device. ``Ctrl+C`` terminates the tool and prints a
-suggested hwdb entry. ::
-
-    ...
-    Kernel axis range:   x [1024..5112], y [2024..4832]
-    ^C
-    Detected axis range: x [2072..4880], y [2159..4832]
-    Resolutions calculated based on user-specified size: x 28, y 49 units/mm
-
-    Suggested hwdb entry:
-    Note: the dmi modalias match is a guess based on your machine's modalias:
-      dmi:bvnLENOVO:bvrGJET72WW(2.22):bd02/21/2014:svnLENOVO:pn20ARS25701:pvrThinkPadT440s:rvnLENOVO:rn20ARS25701:rvrSDK0E50512STD:cvnLENOVO:ct10:cvrNotAvailable:
-    Please verify that this is the most sensible match and adjust if necessary.
-    -8<--------------------------
-    # Laptop model description (e.g. Lenovo X1 Carbon 5th)
-    evdev:name:SynPS/2 Synaptics TouchPad:dmi:*svnLENOVO:*pvrThinkPadT440s*
-     EVDEV_ABS_00=2072:4880:28
-     EVDEV_ABS_01=2159:4832:49
-     EVDEV_ABS_35=2072:4880:28
-     EVDEV_ABS_36=2159:4832:49
-    -8<--------------------------
-    Instructions on what to do with this snippet are in /usr/lib/udev/hwdb.d/60-evdev.hwdb
-
-
-If there are discrepancies between the coordinate range the kernels
-advertises and what what the touchpad sends, the hwdb entry should be added to the
-``60-evdev.hwdb`` file provided by the `systemd project <https://github.com/systemd/systemd>`_.
-An example commit can be found
-`here <https://github.com/systemd/systemd/commit/26f667eac1c5e89b689aa0a1daef6a80f473e045>`_.
-
-The ``libinput measure touchpad-size`` tool attempts to provide the correct
-dmi match but it does require user verification.
-
-In most cases the dmi match can and should be trimmed to the system vendor (``svn``)
-and the product version (``pvr``) or product name (``pn``), with everything else
-replaced by a wildcard (``*``). In the above case, the match string is:
-
-::
-
-     evdev:name:SynPS/2 Synaptics TouchPad:dmi:*svnLENOVO:*pvrThinkPadT440s*
-
-As a general rule: for Lenovo devices use ``pvr`` and for all others use
-``pn``.
-
-.. note:: hwdb match strings only allow for alphanumeric ascii characters. Use a
-	wildcard (* or ?, whichever appropriate) for special characters.
-
-The actual axis overrides are in the form:
-
-::
-
-     # axis number=min:max:resolution
-      EVDEV_ABS_00=2072:4880:28
-
-or, if the range is correct but the resolution is wrong
-
-::
-
-     # axis number=::resolution
-      EVDEV_ABS_00=::28
-
-
-Note the leading single space. The axis numbers are in hex and can be found
-in ``linux/input-event-codes.h``. For touchpads ``ABS_X``, ``ABS_Y``,
-``ABS_MT_POSITION_X`` and ``ABS_MT_POSITION_Y`` are required.
-
-.. note:: The touchpad's ranges and/or resolution should only be fixed when
-	there is a significant discrepancy. A few units do not make a
-	difference and a resolution that is off by 2 or less usually does
-	not matter either.
-
-Once a match and override rule has been found, follow the instructions at
-the top of the
-`60-evdev.hwdb <https://github.com/systemd/systemd/blob/main/hwdb.d/60-evdev.hwdb>`_
-file to save it locally and trigger the udev hwdb reload. Rebooting is
-always a good idea. If the match string is correct, the new properties will
-show up in the
-output of
-
-::
-
-        udevadm info /sys/class/input/event4
-
-
-Adjust the command for the event node of your touchpad.
-A udev builtin will apply the new axis ranges automatically.
-
-When the axis override is confirmed to work, please submit it as a pull
-request to the `systemd project <https://github.com/systemd/systemd>`_.

doc/user/architecture.rst

@@ -1,416 +0,0 @@
-.. _architecture:
-
-==============================================================================
-libinput's internal architecture
-==============================================================================
-
-This page provides an outline of libinput's internal architecture. The goal
-here is to get the high-level picture across and point out the components
-and their interplay to new developers.
-
-The public facing API is in ``libinput.c``, this file is thus the entry point
-for almost all API calls. General device handling is in ``evdev.c`` with the
-device-type-specific implementations in ``evdev-<type>.c``. It is not
-necessary to understand all of libinput to contribute a patch.
-
-As of libinput 1.29 libinput has an internal plugin pipeline that modifies
-the event stream before libinput proper sees it, see
-:ref:`architecture-plugins`.
-
-:ref:`architecture-contexts` is the only user-visible implementation detail,
-everything else is purely internal implementation and may change when
-required.
-
-.. _architecture-contexts:
-
-------------------------------------------------------------------------------
-The udev and path contexts
-------------------------------------------------------------------------------
-
-The first building block is the "context" which can be one of
-two types, "path" and "udev". See **libinput_path_create_context()** and
-**libinput_udev_create_context()**. The path/udev specific bits are in
-``path-seat.c`` and ``udev-seat.c``. This includes the functions that add new
-devices to a context.
-
-
-.. graphviz::
-
-
-    digraph context
-    {
-      compound=true;
-      rankdir="LR";
-      node [
-        shape="box";
-      ]
-
-      libudev [label="libudev 'add' event"]
-      udev [label="**libinput_udev_create_context()**"];
-      udev_backend [label="udev-specific backend"];
-      context [label="libinput context"]
-      udev -> udev_backend;
-      libudev -> udev_backend;
-      udev_backend -> context;
-    }
-
-
-The udev context provides automatic device hotplugging as udev's "add"
-events are handled directly by libinput. The path context requires that the
-caller adds devices.
-
-
-.. graphviz::
-
-
-    digraph context
-    {
-      compound=true;
-      rankdir="LR";
-      node [
-        shape="box";
-      ]
-
-      path [label="**libinput_path_create_context()**"];
-      path_backend [label="path-specific backend"];
-      xdriver [label="**libinput_path_add_device()**"]
-      context [label="libinput context"]
-      path -> path_backend;
-      xdriver -> path_backend;
-      path_backend -> context;
-    }
-
-
-As a general rule: all Wayland compositors use a udev context, the X.org
-stack uses a path context.
-
-Which context was initialized only matters for creating/destroying a context
-and adding devices. The device handling itself is the same for both types of
-context.
-
-.. _architecture-device:
-
-------------------------------------------------------------------------------
-Device initialization
-------------------------------------------------------------------------------
-
-libinput only supports evdev devices, all the device initialization is done
-in ``evdev.c``. Much of the libinput public API is also a thin wrapper around
-the matching implementation in the evdev device.
-
-There is a 1:1 mapping between libinput devices and ``/dev/input/eventX``
-device nodes.
-
-
-
-.. graphviz::
-
-
-    digraph context
-    {
-      compound=true;
-      rankdir="LR";
-      node [
-        shape="box";
-      ]
-
-      devnode [label="/dev/input/event0"]
-
-      libudev [label="libudev 'add' event"]
-      xdriver [label="**libinput_path_add_device()**"]
-      context [label="libinput context"]
-
-      evdev [label="evdev_device_create()"]
-
-      devnode -> xdriver;
-      devnode -> libudev;
-      xdriver -> context;
-      libudev -> context;
-
-      context->evdev;
-
-    }
-
-
-Entry point for all devices is ``evdev_device_create()``, this function
-decides to create a ``struct evdev_device`` for the given device node.
-Based on the udev tags (e.g. ``ID_INPUT_TOUCHPAD``), a
-:ref:`architecture-dispatch` is initialized. All event handling is then in this
-dispatch.
-
-Rejection of devices and the application of quirks is generally handled in
-``evdev.c`` as well. Common functionality shared across multiple device types
-(like button-scrolling) is also handled here.
-
-.. _architecture-dispatch:
-
-------------------------------------------------------------------------------
-Device-type specific event dispatch
-------------------------------------------------------------------------------
-
-Depending on the device type, ``evdev_configure_device`` creates the matching
-``struct evdev_dispatch``. This dispatch interface contains the function
-pointers to handle events. Four such dispatch methods are currently
-implemented: touchpad, tablet, tablet pad, and the fallback dispatch which
-handles mice, keyboards and touchscreens.
-
-.. graphviz::
-
-    digraph context
-    {
-      compound=true;
-      rankdir="LR";
-      node [
-        shape="box";
-      ]
-
-      evdev [label="evdev_device_create()"]
-
-      fallback [label="evdev-fallback.c"]
-      touchpad [label="evdev-mt-touchpad.c"]
-      tablet [label="evdev-tablet.c"]
-      pad [label="evdev-tablet-pad.c"]
-
-      evdev -> fallback;
-      evdev -> touchpad;
-      evdev -> tablet;
-      evdev -> pad;
-
-    }
-
-
-Event dispatch is done per "evdev frame", a collection of events up until including
-the ``SYN_REPORT``. One such ``struct evdev_frame`` represents all state **updates**
-to the previous frame.
-
-While ``evdev.c`` pulls the event out of libevdev, the actual handling of the
-events is performed within the dispatch method.
-
-.. graphviz::
-
-    digraph context
-    {
-      compound=true;
-      rankdir="LR";
-      node [
-        shape="box";
-      ]
-
-      evdev [label="evdev_device_dispatch()"]
-
-      plugins [label="plugin pipline"]
-
-      fallback [label="fallback_interface_process()"];
-      touchpad [label="tp_interface_process()"]
-      tablet [label="tablet_process()"]
-      pad [label="pad_process()"]
-
-      evdev -> plugins;
-      plugins -> fallback;
-      plugins -> touchpad;
-      plugins -> tablet;
-      plugins -> pad;
-    }
-
-
-The dispatch methods then look at the ``struct evdev_frame`` and proceed to
-update the state.
-
-.. _architecture-plugins:
-
-------------------------------------------------------------------------------
-The Plugin Pipeline
-------------------------------------------------------------------------------
-
-As of libinput 1.29 libinput has an **internal** plugin pipeline. These plugins
-logically sit between libevdev and the :ref:`architecture-dispatch` and modify
-the device and/or event stream. The primary motivation of such plugins is that
-modifying the event stream is often simpler than analyzing the state later.
-
-Plugins are loaded on libinput context startup and are executed in-order. The last
-plugin is the hardcoded `evdev-plugin.c` which takes the modified event stream and
-passes the events to the dispatch.
-
-.. graphviz::
-
-    digraph context
-    {
-      compound=true;
-      rankdir="LR";
-      node [
-        shape="box";
-      ]
-
-      evdev [label="evdev_device_dispatch()"]
-
-      p1 [label="P1"]
-      p2 [label="P2"]
-      p3 [label="P3"]
-      ep [label="evdev-plugin"]
-
-      fallback [label="fallback_interface_process()"];
-      touchpad [label="tp_interface_process()"]
-      tablet [label="tablet_process()"]
-      pad [label="pad_process()"]
-
-      evdev -> p1;
-      p1 -> p2;
-      p2 -> p3;
-      p3 -> ep;
-      ep -> fallback;
-      ep -> touchpad;
-      ep -> tablet;
-      ep -> pad;
-    }
-
-Each plugin may not only modify the current event frame (this includes adding/removing events
-from the frame), it may also append or prepend additional event frames. For
-example the tablet proximity-timer plugin adds proximity in/out events to the
-event stream.
-
-.. graphviz::
-
-    digraph context
-    {
-      compound=true;
-      rankdir="LR";
-      node [
-        shape="box";
-      ]
-      n0 [label= "", shape=none,height=.0,width=.0]
-      n1 [label= "", shape=none,height=.0,width=.0]
-
-      p1 [label="P1"]
-      p2 [label="P2"]
-      p3 [label="P3"]
-      ep [label="evdev-plugin"]
-
-      n0 -> p1 [label="F1"];
-      p1 -> p2 [label="F1"];
-      p2 -> p3 [label="F1,F2"];
-      p3 -> ep [label="F3,F1,F2"];
-      ep -> n1 [label="F3,F1,F2"];
-    }
-
-In the diagram above, the plugin ``P2`` *appends* a new frame (``F2``), the plugin ``P3``
-*prepends* a new frame (``F3``). The original event frame ``F1`` thus becomes the event frame
-sequence ``F3``, ``F1``, ``F2`` by the time it reaches the :ref:`architecture-dispatch`.
-
-Note that each plugin only sees one event frame at a time, so ``P3`` would see ``F1`` first,
-decides to prepend ``F3`` and passes ``F1`` through. It then sees ``F2`` but does nothing with
-it (optionally modified in-place).
-
-.. _architecture-configuration:
-
-------------------------------------------------------------------------------
-Device configuration
-------------------------------------------------------------------------------
-
-All device-specific configuration is handled through ``struct
-libinput_device_config_FOO`` instances. These are set up during device init
-and provide the function pointers for the ``get``, ``set``, ``get_default``
-triplet of configuration queries (or more, where applicable).
-
-For example, the ``struct tablet_dispatch`` for tablet devices has a
-``struct libinput_device_config_accel``. This struct is set up with the
-required function pointers to change the profiles.
-
-
-.. graphviz::
-
-
-    digraph context
-    {
-      compound=true;
-      rankdir="LR";
-      node [
-        shape="box";
-      ]
-
-      tablet [label="struct tablet_dispatch"]
-      config [label="struct libinput_device_config_accel"];
-      tablet_config [label="tablet_accel_config_set_profile()"];
-      tablet->config;
-      config->tablet_config;
-    }
-
-
-When the matching ``**libinput_device_config_set_FOO()**`` is called, this goes
-through to the config struct and invokes the function there. Thus, it is
-possible to have different configuration functions for a mouse vs a
-touchpad, even though the interface is the same.
-
-
-.. graphviz::
-
-
-    digraph context
-    {
-      compound=true;
-      rankdir="LR";
-      node [
-        shape="box";
-      ]
-
-      libinput [label="**libinput_device_config_accel_set_profile()**"];
-      tablet_config [label="tablet_accel_config_set_profile()"];
-      libinput->tablet_config;
-    }
-
-
-.. _architecture-filter:
-
-------------------------------------------------------------------------------
-Pointer acceleration filters
-------------------------------------------------------------------------------
-
-All pointer acceleration is handled in the ``filter.c`` file and its
-associated files.
-
-The ``struct motion_filter`` is initialized during device init, whenever
-deltas are available they are passed to ``filter_dispatch()``. This function
-returns a set of :ref:`normalized coordinates <motion_normalization_customization>`.
-
-All actual acceleration is handled within the filter, the device itself has
-no further knowledge. Thus it is possible to have different acceleration
-filters for the same device types (e.g. the Lenovo X230 touchpad has a
-custom filter).
-
-
-.. graphviz::
-
-
-    digraph context
-    {
-      compound=true;
-      rankdir="LR";
-      node [
-        shape="box";
-      ]
-
-      fallback [label="fallback deltas"];
-      touchpad [label="touchpad deltas"];
-      tablet [label="tablet deltas"];
-
-      filter [label="filter_dispatch"];
-
-      fallback->filter;
-      touchpad->filter;
-      tablet->filter;
-
-      flat [label="accelerator_interface_flat()"];
-      x230 [label="accelerator_filter_x230()"];
-      pen [label="tablet_accelerator_filter_flat_pen()"];
-
-      filter->flat;
-      filter->x230;
-      filter->pen;
-
-    }
-
-
-Most filters convert the deltas (incl. timestamps) to a motion speed and
-then apply a so-called profile function. This function returns a factor that
-is then applied to the current delta, converting it into an accelerated
-delta. See :ref:`pointer-acceleration` for more details.
-the current

doc/user/building.rst

@@ -1,299 +0,0 @@
-.. _building_libinput:
-
-==============================================================================
-libinput build instructions
-==============================================================================
-
-
-.. contents::
-    :local:
-    :backlinks: entry
-
-Instructions on how to build libinput and its tools and how to build against
-libinput.
-
-The build instruction on this page detail how to overwrite your
-system-provided libinput with one from the git repository, see
-see :ref:`reverting_install` to revert to the previous state.
-
-.. _distribution_repos:
-
-------------------------------------------------------------------------------
-Distribution repositories for libinput from git
-------------------------------------------------------------------------------
-
-Some distributions provide package repositories for users that want to test
-the latest libinput without building it manually.
-
-.. note:: The list below is provided for convenience. The libinput community
-   cannot provide any guarantees that the packages in those repositories are
-   correct, up-to-date and/or unmodified from the git branch. Due dilligence
-   is recommended.
-
-The following repositories provide an up-to-date package for libinput:
-
-- **Arch:** https://aur.archlinux.org/packages/libinput-git/
-- **Fedora:** https://copr.fedorainfracloud.org/coprs/whot/libinput-git/
-
-Please follow the respective repositories for instructions on how to enable
-the repository and install libinput.
-
-
-.. _building:
-
-------------------------------------------------------------------------------
-Building libinput
-------------------------------------------------------------------------------
-
-libinput uses `meson <https://www.mesonbuild.com>`_ and
-`ninja <https://www.ninja-build.org>`_. A build is usually the three-step
-process below.  A successful build requires the
-:ref:`building_dependencies` to be installed before running meson.
-
-
-::
-
-     $> git clone https://gitlab.freedesktop.org/libinput/libinput
-     $> cd libinput
-     $> meson setup --prefix=/usr builddir/
-     $> ninja -C builddir/
-     $> sudo ninja -C builddir/ install
-
-
-When running libinput versions 1.11.x or earlier, you must run
-
-::
-
-     $> sudo systemd-hwdb update
-
-
-Additional options may also be specified. For example:
-
-::
-
-     $> meson setup --prefix=/usr -Ddocumentation=false builddir/
-
-
-We recommend that users disable the documentation, it's not usually required
-for testing and reduces the number of dependencies needed.
-
-The ``prefix`` or other options can be changed later with the
-``meson configure`` command. For example:
-
-::
-
-     $> meson configure builddir/ -Dprefix=/some/other/prefix -Ddocumentation=true
-     $> ninja -C builddir
-     $> sudo ninja -C builddir/ install
-
-
-Running ``meson configure builddir/`` with no other arguments lists all
-configurable options meson provides.
-
-To rebuild from scratch, simply remove the build directory and run meson
-again:
-
-::
-
-     $> rm -r builddir/
-     $> meson setup --prefix=....
-
-
-.. _verifying_install:
-
-..............................................................................
-Verifying the install
-..............................................................................
-
-To verify the install worked correctly, check that libinput.so.x.x.x is in
-the library path and that all symlinks point to the new library.
-
-::
-
-     $> ldconfig -p | grep libinput | awk '{print $NF}' | xargs ls -l
-     lrwxrwxrwx 1 root root      14 lug 22 13:06 /usr/lib/x86_64-linux-gnu/libinput.so -> libinput.so.10
-     lrwxrwxrwx 1 root root      19 lug 22 13:06 /usr/lib/x86_64-linux-gnu/libinput.so.10 -> libinput.so.10.13.0
-     -rwxr-xr-x 1 root root 1064144 lug 22 13:06 /usr/lib/x86_64-linux-gnu/libinput.so.10.13.0
-
-.. _reverting_install:
-
-..............................................................................
-Reverting to the system-provided libinput package
-..............................................................................
-
-The recommended way to revert to the system install is to use the package
-manager to reinstall the libinput package. In some cases, this may leave
-files in the system (e.g. ``/usr/lib/libinput.la``) but these files are
-usually harmless. To definitely remove all files, run the following command
-from the libinput source directory:
-
-
-::
-
-     $> sudo ninja -C builddir/ uninstall
-     # WARNING: Do not restart the computer/X/the Wayland compositor after
-     # uninstall, reinstall the system package immediately!
-
-
-The following commands reinstall the current system package for libinput,
-overwriting manually installed files.
-
-- **Debian/Ubuntu** based distributions: ``sudo apt-get install --reinstall libinput``
-- **Fedora 22** and later: ``sudo dnf reinstall libinput``
-- **RHEL/CentOS/Fedora 21** and earlier: ``sudo yum reinstall libinput``
-- **openSUSE**: ``sudo zypper install --force libinput10``
-- **Arch**: ``sudo pacman -S libinput``
-
-.. _building_selinux:
-
-..............................................................................
-SELinux adjustments
-..............................................................................
-
-.. note:: This section only applies to meson version < 0.42.0
-
-On systems with SELinux, overwriting the distribution-provided package with
-a manually built libinput may cause SELinux denials. This usually manifests
-when gdm does not start because it is denied access to libinput. The journal
-shows a log message in the form of:
-
-
-::
-
-     May 25 15:28:42 localhost.localdomain audit[23268]: AVC avc:  denied  { execute } for  pid=23268 comm="gnome-shell" path="/usr/lib64/libinput.so.10.12.2" dev="dm-0" ino=1709093 scontext=system_u:system_r:xdm_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:user_home_t:s0 tclass=file permissive=0
-     May 25 15:28:42 localhost.localdomain org.gnome.Shell.desktop[23270]: /usr/bin/gnome-shell: error while loading shared libraries: libinput.so.10: failed to map segment from shared object
-
-
-The summary of this error message is that gdm's gnome-shell runs in the
-``system_u:system_r:xdm_t`` context but libinput is installed with the
-context ``unconfined_u:object_r:user_home_t``.
-
-To avoid this issue, restore the SELinux context for any system files.
-
-
-::
-
-     $> sudo restorecon /usr/lib*/libinput.so.*
-
-
-This issue is tracked in https://github.com/mesonbuild/meson/issues/1967.
-
-.. _building_dependencies:
-
-------------------------------------------------------------------------------
-Build dependencies
-------------------------------------------------------------------------------
-
-libinput has a few build-time dependencies that must be installed prior to
-running meson.
-
-.. hint:: The build dependencies for some distributions can be found in the
-	`GitLab Continuous Integration file <https://gitlab.freedesktop.org/libinput/libinput/blob/main/.gitlab-ci.yml>`_.
-	Search for **FEDORA_PACKAGES** in the **variables:** definition
-	and check the list for an entry for your distribution.
-
-In most cases, it is sufficient to install the dependencies that your
-distribution uses to build the libinput package.  These can be installed
-with one of the following commands:
-
-- **Debian/Ubuntu** based distributions: ``sudo apt-get build-dep libinput``
-- **Fedora 22** and later: ``sudo dnf builddep libinput``
-- **RHEL/CentOS/Fedora 21** and earlier: ``sudo yum-builddep libinput``
-- **openSUSE**: ::
-
-     $> sudo zypper modifyrepo --enable ``zypper repos | grep source | awk '{print $5}'``
-     $> sudo zypper source-install -d libinput10
-     $> sudo zypper install autoconf automake libtool
-     $> sudo zypper modifyrepo --disable ``zypper repos | grep source | awk '{print $5}'``
-
-
-- **Arch**: ::
-
-     $> sudo pacman -S asp
-     $> cd $(mktemp -d)
-     $> asp export libinput
-     $> cd libinput
-     $> makepkg --syncdeps --nobuild --noextract
-
-
-
-If dependencies are missing, meson shows a message ``No package 'foo'
-found``.  See
-`this blog post here <https://who-t.blogspot.com/2018/07/meson-fails-with-native-dependency-not-found.html>`_
-for instructions on how to fix it.
-
-..............................................................................
-Build dependencies per distribution
-..............................................................................
-
-
-.. include:: dependencies.rst
-
-
-.. _building_conditional:
-
-------------------------------------------------------------------------------
-Conditional builds
-------------------------------------------------------------------------------
-
-libinput supports several meson options to disable parts of the build. See
-the ``meson_options.txt`` file in the source tree for a full list of
-available options. The default build enables most options and thus requires
-more build dependencies. On systems where build dependencies are an issue,
-options may be disabled with this meson command: ::
-
-    meson setup --prefix=/usr -Dsomefeature=false builddir
-
-Where ``-Dsomefeature=false`` may be one of:
-
-- ``-Ddocumentation=false``
-    Disables the documentation build (this website). Building the
-    documentation is only needed on the maintainer machine.
-- ``-Dtests=false``
-    Disables the test suite. The test suite is only needed on developer
-    systems.
-- ``-Ddebug-gui=false``
-    Disables the ``libinput debug-gui`` helper tool (see :ref:`tools`),
-    dropping GTK and other build dependencies. The debug-gui is only
-    required for troubleshooting.
-- ``-Dlibwacom=false``
-    libwacom is required by libinput's tablet code to gather additional
-    information about tablets that is not available from the kernel device.
-    It is not recommended to disable libwacom unless libinput is used in an
-    environment where tablet support is not required. libinput provides tablet
-    support even without libwacom, but some features may be missing or working
-    differently.
-
-.. _building_against:
-
-------------------------------------------------------------------------------
-Building against libinput
-------------------------------------------------------------------------------
-
-libinput provides a
-`pkg-config <https://www.freedesktop.org/wiki/Software/pkg-config/>`_ file.
-Software that uses autotools should use the ``PKG_CHECK_MODULES`` autoconf
-macro: ::
-
-    PKG_CHECK_MODULES(LIBINPUT, "libinput")
-
-Software that uses meson should use the ``dependency()`` function: ::
-
-    pkgconfig = import('pkgconfig')
-    dep_libinput = dependency('libinput')
-
-Software that uses CMake should use: ::
-
-    find_package(Libinput)
-    target_link_libraries(myprogram PRIVATE Libinput::Libinput)
-
-Otherwise, the most rudimentary way to compile and link a program against
-libinput is:
-
-
-::
-
-         gcc -o myprogram myprogram.c ``pkg-config --cflags --libs libinput``
-
-
-For further information on using pkgconfig see the pkg-config documentation.

doc/user/button-debouncing.rst

@@ -1,56 +0,0 @@
-
-.. _button_debouncing:
-
-==============================================================================
-Button debouncing
-==============================================================================
-
-Physical buttons experience wear-and-tear with usage. On some devices this
-can result in an effect called "contact bouncing" or "chatter". This effect
-can cause the button to send multiple events within a short time frame, even
-though the user only pressed or clicked the button once. This effect can be
-counteracted by "debouncing" the buttons, usually by ignoring erroneous
-events.
-
-libinput provides two methods of debouncing buttons, referred to as the
-"bounce" and "spurious" methods:
-
-- In the "bounce" method, libinput monitors hardware bouncing on button
-  state changes, i.e. when a user clicks or releases a button. For example,
-  if a user presses a button but the hardware generates a
-  press-release-press sequence in quick succession, libinput ignores the
-  release and second press event. This method is always enabled.
-- in the "spurious" method, libinput detects spurious releases of a button
-  while the button is physically held down by the user. These releases are
-  immediately followed by a press event. libinput monitors for these events
-  and ignores the release and press event. This method is disabled by
-  default and enables once libinput detects the first faulty event sequence.
-
-The "bounce" method guarantees that all press events are delivered
-immediately and most release events are delivered immediately. The
-"spurious" method requires that release events are delayed, libinput thus
-does not enable this method unless a faulty event sequence is detected. A
-message is printed to the log when spurious deboucing was detected.
-
-libinput's debouncing is supposed to correct hardware damage or
-substandard hardware. Debouncing also exists as an accessibility feature
-but the requirements are different. In the accessibility feature, multiple
-physical key presses, usually caused by involuntary muscle movement, must be
-filtered to only one key press. This feature must be implemented higher in
-the stack, libinput is limited to hardware debouncing.
-
-Below is an illustration of the button debouncing modes to show the relation
-of the physical button state and the application state. Where applicable, an
-extra line is added to show the timeouts used by libinput that
-affect the button state handling. The waveform's high and low states
-correspond to the buttons 'pressed' and 'released' states, respectively.
-
-.. figure:: button-debouncing-wave-diagram.svg
-    :align: center
-
-    Diagram illustrating button debouncing
-
-
-Some devices send events in bursts, erroneously triggering the button
-debouncing detection. Please :ref:`file a bug <reporting_bugs>` if that
-occurs for your device.

doc/user/clickpad-softbuttons.rst

@@ -1,144 +0,0 @@
-.. _clickpad_softbuttons:
-
-==============================================================================
-Clickpad software button behavior
-==============================================================================
-
-"Clickpads" are touchpads without separate physical buttons. Instead, the
-whole touchpad acts as a button and left or right button clicks are
-distinguished by :ref:`the location of the fingers <software_buttons>` or
-the :ref:`number of fingers on the touchpad <clickfinger>`.
-"ClickPad" is a trademark by `Synaptics Inc. <http://www.synaptics.com/en/clickpad.php>`_
-but for simplicity we refer to any touchpad with the above feature as Clickpad,
-regardless of the manufacturer.
-
-The kernel marks clickpads with the
-`INPUT_PROP_BUTTONPAD <https://www.kernel.org/doc/Documentation/input/event-codes.txt>`_
-property. Without this property, libinput would not know whether a touchpad
-is a clickpad or not. To perform a right-click on a Clickpad, libinput
-provides :ref:`software_buttons` and :ref:`clickfinger`.
-
-.. note:: The term "click" refers refer to a physical button press
-	  and/or release of the touchpad, the term "button event" refers to
-	  the events generated by libinput in response to a click.
-
-.. _software_buttons:
-
-------------------------------------------------------------------------------
-Software button areas
-------------------------------------------------------------------------------
-
-The bottom of the touchpad is split into three distinct areas generate left,
-middle or right button events on click. The height of the button area
-depends on the hardware but is usually around 10mm.
-
-.. figure :: software-buttons-visualized.svg
-     :align: center
-
-     The locations of the virtual button areas.
-
-
-Left, right and middle button events can be triggered as follows:
-
-- if a finger is in the main area or the left button area, a click generates
-  left button events.
-- if a finger is in the right area, a click generates right button events.
-- if a finger is in the middle area, a click generates middle button events.
-
-.. figure:: software-buttons.svg
-    :align: center
-
-    Left, right and middle-button click with software button areas
-
-The middle button is always centered on the touchpad and smaller in size
-than the left or right button. The actual size is device-dependent. Many
-touchpads do not have visible markings so the exact location of the button
-is unfortunately not visibly obvious.
-
-.. note:: If :ref:`middle button emulation <middle_button_emulation>` is
-	  enabled on a clickpad, only left and right button areas are
-	  available.
-
-If fingers are down in the main area in addition to fingers in the
-left or right button area, those fingers are are ignored.
-A release event always releases the buttons logically down, regardless of
-the current finger position
-
-.. figure:: software-buttons-thumbpress.svg
-    :align: center
-
-    Only the location of the thumb determines whether it is a left, right or
-    middle click.
-
-The movement of a finger can alter the button area behavior:
-
-- if a finger starts in the main area and moves into the software button
-  area, the software buttons do not apply to that finger
-- once a finger has moved out of the button area, it cannot move back in and
-  trigger a right or middle button event
-- a finger moving within the software button area does not move the pointer
-- once a finger moves out out of the button area it will control the
-  pointer (this only applies if there is no other finger down on the
-  touchpad)
-
-.. figure:: software-buttons-conditions.svg
-    :align: center
-
-    **Left:** moving a finger into the right button area does not trigger a
-    right-button click.
-    **Right:** moving within the button areas does not generate pointer
-    motion.
-
-On some touchpads, notably the 2015 Lenovo X1 Carbon 3rd series, the very
-bottom end of the touchpad is outside of the sensor range but it is possible
-to trigger a physical click there. To libinput, the click merely shows up as
-a left button click without any positional finger data and it is
-impossible to determine whether it is a left or a right click. libinput
-ignores such button clicks, this behavior is intentional.
-
-.. _clickfinger:
-
-------------------------------------------------------------------------------
-Clickfinger behavior
-------------------------------------------------------------------------------
-
-This is the default behavior on Apple touchpads. Here, a left, right, middle
-button event is generated when one, two, or three fingers are held down on the
-touchpad when a physical click is generated, given the default mapping. The
-location of the fingers does not matter and there are no software-defined
-button areas. It is possible to swap right and middle buttons, the same way as
-with :ref:`tapping <tapping>`.
-
-.. figure:: clickfinger.svg
-    :align: center
-
-    One, two and three-finger click with Clickfinger behavior
-
-On some touchpads, libinput imposes a limit on how the fingers may be placed
-on the touchpad. In the most common use-case this allows for a user to
-trigger a click with the thumb while leaving the pointer-moving finger on
-the touchpad.
-
-.. figure:: clickfinger-distance.svg
-    :align: center
-
-    Illustration of the distance detection algorithm
-
-In the illustration above the red area marks the proximity area around the
-first finger. Since the thumb is outside of that area libinput considers the
-click a single-finger click rather than a two-finger click.
-
-.. _special_clickpads:
-
-------------------------------------------------------------------------------
-Special Clickpads
-------------------------------------------------------------------------------
-
-The Lenovo \*40 series laptops have a clickpad that provides two software button sections, one at
-the top and one at the bottom. See :ref:`Lenovo \*40 series touchpad support <t440_support>`
-for details on the top software button.
-
-Some Clickpads, notably some Cypress ones, perform right button detection in
-firmware and appear to userspace as if the touchpad had physical buttons.
-While physically clickpads, these are not handled by the software and
-treated like traditional touchpads.

doc/user/clickpad-with-right-button.rst

@@ -1,46 +0,0 @@
-.. _clickpads_with_right_buttons:
-
-==============================================================================
-Clickpads with a fake right button
-==============================================================================
-
-libinput relies on the kernel to label :ref:`Clickpads <touchpads_buttons_clickpads>`
-with the ``INPUT_PROP_BUTTONPAD`` property so it can enable the correct
-:ref:`clickpad_softbuttons`. Clickpads are not expected to have a right button
-since the whole surface can be depressed.
-
-A common bug encountered with :ref:`Clickpads <touchpads_buttons_clickpads>`
-is that the device advertises a physical right button where no such button
-exists. This is usually a bug in the firmware of the device and causes the
-following warning to be emitted by libinput::
-
-    "<device name> clickpad advertising right button"
-
-The user-visible effect of this is usually negligible since these devices
-cannot actually trigger a right click and libinput's default behaviors for
-clickpads work as expected.
-
-However, we should nonetheless correct the device to get rid of this warning
-and avoid potential issues with future features. The :ref:`device-quirks`
-provide a simple way to disable the fake right button on the device. The
-following quirk disables the right button on the MyModel laptop from the
-MyVendor OEM::
-
-    [MyVendor MyModel Touchpad]
-    MatchName=Foo Bar Touchpad
-    MatchUdevtype=touchpad
-    MatchDMIModAlias=dmi:*:svnMyVendor:pnMyModel:*
-    AttrEventCode=-BTN_RIGHT
-
-The name of the device can be obtained using :ref:`libinput record <libinput-record>`,
-the modalias match is a shell-style glob against the value of ``/sys/class/dmi/id/modalias``.
-In most cases, matching should be against ``svn`` (system vendor) and one of
-``pn`` (product name) or ``pvr`` (product version), whichever provides a
-useful description of the individual laptop model. See the
-:ref:`device-quirks` documentation for details on testing local quirks.
-
-For reference, some example commits that add such a quirk are:
-
- - `bf61ab9bb0694d0ac3d60a7f815779abfe4886e6 <https://gitlab.freedesktop.org/libinput/libinput/-/commit/bf61ab9bb0694d0ac3d60a7f815779abfe4886e6>`__
- - `74fac6d040ac62048882dfb6f73da567ace6a6f5 <https://gitlab.freedesktop.org/libinput/libinput/-/commit/74fac6d040ac62048882dfb6f73da567ace6a6f5>`__
- - `89cd0f990e3bee9906754d6ca8484ed5aa392249 <https://gitlab.freedesktop.org/libinput/libinput/-/commit/89cd0f990e3bee9906754d6ca8484ed5aa392249>`__

doc/user/conf.py.in

@@ -1,193 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-# Configuration file for the Sphinx documentation builder.
-#
-# This file does only contain a selection of the most common options. For a
-# full list see the documentation:
-# http://www.sphinx-doc.org/en/stable/config
-
-# -- Path setup --------------------------------------------------------------
-
-# If extensions (or modules to document with autodoc) are in another directory,
-# add these directories to sys.path here. If the directory is relative to the
-# documentation root, use os.path.abspath to make it absolute, like shown here.
-#
-# sys.path.insert(0, os.path.abspath('.'))
-
-import sys
-import os
-sys.path.insert(0, os.path.abspath('@BUILDDIR@'))
-
-# -- Project information -----------------------------------------------------
-
-project = '@PROJECT_NAME@'
-copyright = '2019, the libinput authors'
-author = 'the libinput authors'
-
-# The short X.Y version
-version = '@PROJECT_VERSION@'
-# The full version, including alpha/beta/rc tags
-release = '@PROJECT_VERSION@'
-
-
-# -- General configuration ---------------------------------------------------
-
-# If your documentation needs a minimal Sphinx version, state it here.
-#
-# needs_sphinx = '1.0'
-
-# Add any Sphinx extension module names here, as strings. They can be
-# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
-# ones.
-extensions = [
-    'sphinx.ext.mathjax',
-    'sphinx.ext.graphviz',
-    'sphinx.ext.extlinks',
-]
-
-# Add any paths that contain templates here, relative to this directory.
-templates_path = ['_templates']
-
-# The suffix(es) of source filenames.
-# You can specify multiple suffix as a list of string:
-#
-# source_suffix = ['.rst', '.md']
-source_suffix = '.rst'
-
-# The master toctree document.
-master_doc = 'index'
-
-# The language for content autogenerated by Sphinx. Refer to documentation
-# for a list of supported languages.
-#
-# This is also used if you do content translation via gettext catalogs.
-# Usually you set "language" from the command line for these cases.
-language = 'en'
-
-# List of patterns, relative to source directory, that match files and
-# directories to ignore when looking for source files.
-# This pattern also affects html_static_path and html_extra_path .
-exclude_patterns = []
-
-# The name of the Pygments (syntax highlighting) style to use.
-pygments_style = 'sphinx'
-
-highlight_language = 'none'
-
-# -- Options for HTML output -------------------------------------------------
-
-# The theme to use for HTML and HTML Help pages.  See the documentation for
-# a list of builtin themes.
-#
-html_theme = 'sphinx_rtd_theme'
-
-# Theme options are theme-specific and customize the look and feel of a theme
-# further.  For a list of options available for each theme, see the
-# documentation.
-#
-html_theme_options = {
-    'collapse_navigation': False,
-    'navigation_depth': 3,
-}
-
-# Add any paths that contain custom static files (such as style sheets) here,
-# relative to this directory. They are copied after the builtin static files,
-# so a file named "default.css" will overwrite the builtin "default.css".
-# html_static_path = ['_static']
-
-# Custom sidebar templates, must be a dictionary that maps document names
-# to template names.
-#
-# The default sidebars (for documents that don't match any pattern) are
-# defined by theme itself.  Builtin themes are using these templates by
-# default: ``['localtoc.html', 'relations.html', 'sourcelink.html',
-# 'searchbox.html']``.
-#
-# html_sidebars = {}
-
-
-# -- Options for HTMLHelp output ---------------------------------------------
-
-# Output file base name for HTML help builder.
-htmlhelp_basename = '@PROJECT_NAME@doc'
-
-
-# -- Options for LaTeX output ------------------------------------------------
-
-latex_elements = {
-    # The paper size ('letterpaper' or 'a4paper').
-    #
-    # 'papersize': 'letterpaper',
-
-    # The font size ('10pt', '11pt' or '12pt').
-    #
-    # 'pointsize': '10pt',
-
-    # Additional stuff for the LaTeX preamble.
-    #
-    # 'preamble': '',
-
-    # Latex figure (float) alignment
-    #
-    # 'figure_align': 'htbp',
-}
-
-# Grouping the document tree into LaTeX files. List of tuples
-# (source start file, target name, title,
-#  author, documentclass [howto, manual, or own class]).
-latex_documents = [
-    (master_doc, '@PROJECT_NAME@.tex', '@PROJECT_NAME@ Documentation',
-     'Peter Hutterer', 'manual'),
-]
-
-
-# -- Options for manual page output ------------------------------------------
-
-# One entry per manual page. List of tuples
-# (source start file, name, description, authors, manual section).
-man_pages = [
-    (master_doc, '@PROJECT_NAME@', '@PROJECT_NAME@ Documentation',
-     [author], 1)
-]
-
-
-# -- Options for Texinfo output ----------------------------------------------
-
-# Grouping the document tree into Texinfo files. List of tuples
-# (source start file, target name, title, author,
-#  dir menu entry, description, category)
-texinfo_documents = [
-    (master_doc, '@PROJECT_NAME@', '@PROJECT_NAME@ Documentation',
-     author, '@PROJECT_NAME@', 'One line description of project.',
-     'Miscellaneous'),
-]
-
-
-# -- Extension configuration -------------------------------------------------
-
-from recommonmark.parser import CommonMarkParser
-
-extlinks = { 'commit' :
-		('https://gitlab.freedesktop.org/libinput/libinput/commit/%s',
-			'git commit %s')
-}
-
-# -- git version hack -------------------------------------------------
-#
-# meson doesn't take configuration_data() for vcs_tag, so we cannot replace
-# two substrings in the same file.
-#
-# sphinx cannot do ..include:: without linebreaks, so in-line replacements
-# are a no-go.
-#
-# Work around this by generating a mini python module in meson through
-# vcs_tag, then use that to generate the replacements in rst_prolog.
-
-import git_version
-
-rst_prolog = """
-   .. |git_version| replace:: :commit:`{}`
-   .. |git_version_full| replace:: :commit:`{}`
-
-""".format(git_version.get_git_version(),
-	   git_version.get_git_version_full)

doc/user/configuration.rst

@@ -1,237 +0,0 @@
-.. _config_options:
-
-==============================================================================
-Configuration options
-==============================================================================
-
-Below is a list of configurable options exposed to the users.
-
-.. contents::
-   :depth: 1
-   :local:
-
-
-.. hint:: Not all configuration options are available on all devices. Use
-	  :ref:`libinput list-devices <libinput-list-devices>` to show the
-	  configuration options for local devices.
-
-libinput's configuration interface is available to the caller only, not
-directly to the user. Thus it is the responsibility of the caller to expose
-the various options and how these options are exposed. For example, the
-`xf86-input-libinput driver <https://gitlab.freedesktop.org/xorg/driver/xf86-input-libinput/>`_
-exposes the options through X Input device properties and `xorg.conf.d
-<https://linux.die.net/man/5/xorg.conf.d>`_ options.  See the `libinput(4)
-<https://www.mankier.com/4/libinput>`_ man page for more details.
-
-
-------------------------------------------------------------------------------
-Tap-to-click
-------------------------------------------------------------------------------
-
-See :ref:`tapping` for details on how this feature works. Configuration
-options exposed by libinput are:
-
-- how many tapping fingers are supported by this device
-- a toggle to enable/disable tapping
-- a toggle to enable/disable tap-and-drag, see :ref:`tapndrag`.
-- a toggle to enable/disable tap-and-drag drag lock, see :ref:`tapndrag`
-- The default order is 1, 2, 3 finger tap mapping to left, right, middle
-  click, respectively. This order can be changed to left, middle, right click,
-  respectively.
-
-Tapping is usually available on touchpads and the touchpad part of external
-graphics tablets. Tapping is usually **not** available on touch screens,
-for those devices it is expected to be implemented by the toolkit.
-
-------------------------------------------------------------------------------
-Three-finger drag
-------------------------------------------------------------------------------
-
-Three-finger drag allows emulates the mouse button down while three fingers
-are down on a touchpad without the need to press a physical button or use
-:ref:`tapndrag`. See :ref:`drag_3fg` for details on how this feature works.
-
-Three-finger drag is usually available on touchpads and the touchpad part of
-external graphics tablets. Three-finger drag is usually **not** available on
-touch screens, for those devices it is expected to be implemented by the
-toolkit.
-
-------------------------------------------------------------------------------
-Send Events Mode
-------------------------------------------------------------------------------
-
-The Send Events Mode is libinput's terminology for disabling a device. It is
-more precise in that the device only stops sending events but may not get
-fully disabled. For example, disabling the touchpad on a
-:ref:`Lenovo T440 and similar <t440_support>` leaves the top software
-buttons enabled for the trackpoint. Available options are
-**enabled** (send events normally), **disabled** ( do not send events),
-**disabled on external mouse** (disable the device while an external mouse
-is plugged in).
-
-
-.. _config_pointer_acceleration:
-
-------------------------------------------------------------------------------
-Pointer acceleration
-------------------------------------------------------------------------------
-
-Pointer acceleration is a function to convert input deltas to output deltas,
-usually based on the movement speed of the device, see
-:ref:`pointer-acceleration` for details.
-
-Pointer acceleration is normalized into a [-1, 1] range, where -1 is
-"slowest" and 1 is "fastest". Most devices use a default speed of 0.
-
-The pointer acceleration profile defines **how** the input deltas are
-converted, see :ref:`ptraccel-profiles`. Most devices have their default
-profile (usually called "adaptive") and a "flat" profile. The flat profile
-does not apply any acceleration.
-
-------------------------------------------------------------------------------
-Scrolling
-------------------------------------------------------------------------------
-
-"Natural scrolling" is the terminology for moving the content in the
-direction of scrolling, i.e. moving the wheel or fingers down moves the page
-down. Traditional scrolling moves the content in the opposite direction.
-Natural scrolling can be turned on or off, it is usually off by default.
-
-The scroll method defines how to trigger scroll events. On touchpads
-libinput provides two-finger scrolling and edge scrolling. Two-finger
-scrolling converts a movement with two fingers to a series of scroll events.
-Edge scrolling converts a movement with one finger along the right or bottom
-edge of the touchpad into a series of scroll events.
-
-On other libinput provides button-scrolling - movement of the device while
-the designated scroll button is down is converted to scroll events. The
-button used for scrolling is configurable.
-
-The scroll method can be chosen or disabled altogether but most devices only
-support a subset of available scroll methods. libinput's default is
-two-finger scrolling for multi-touch touchpads, edge scrolling for
-single-touch touchpads. On tracksticks, button scrolling is enabled by
-default.
-
-See :ref:`scrolling` for more details on how the scroll methods work.
-
-------------------------------------------------------------------------------
-Left-handed Mode
-------------------------------------------------------------------------------
-
-Left-handed mode switches the device's functionality to be more
-accommodating for left-handed users. On mice this usually means swapping the
-left and right mouse button, on tablets this allows the tablet to be used
-upside-down to present the pad buttons for the non-dominant right hand. Not
-all devices have left-handed mode.
-
-Left-handed mode can be enabled or disabled and is disabled by default.
-
-------------------------------------------------------------------------------
-Middle Button Emulation
-------------------------------------------------------------------------------
-
-Middle button emulation converts a simultaneous left and right button click
-into a middle button. The emulation can be enabled or disabled. Middle
-button emulation is usually enabled when the device does not provide a
-middle button.
-
-------------------------------------------------------------------------------
-Click method
-------------------------------------------------------------------------------
-
-The click method defines how button events are triggered on a :ref:`clickpad
-<clickpad_softbuttons>`. When set to button areas, the bottom area of the
-touchpad is divided into a left, middle and right button area. When set to
-clickfinger, the number of fingers on the touchpad decide the button type.
-Clicking with 1, 2, 3 fingers triggers a left, right, or middle click,
-respectively. The default click method is software button areas. Click
-methods are usually only available on :ref:`clickpads
-<clickpad_softbuttons>`.
-
-------------------------------------------------------------------------------
-Disable while typing
-------------------------------------------------------------------------------
-
-DWT is the most generic form of palm detection on touchpad. While the user
-is typing on an internal keyboard the touchpad is disabled, the touchpad
-is enabled again after a timeout.  See :ref:`disable-while-typing` for more
-info.
-
-Disable-while-typing can be enabled or disabled, it is enabled by default on
-most touchpads.
-
-------------------------------------------------------------------------------
-Disable while trackpointing
-------------------------------------------------------------------------------
-
-DWTP is a form of palm detecion for devices that have a trackpoint (like
-Thinkpads). While the user is using the trackpoint, the touchpad is disabled,
-being enabled again after a timeout. See :ref:`disable-while-trackpointing` for
-more info.
-
-Disable-while-trackpointing can be enabled or disabled, it is enabled by
-default.
-
-------------------------------------------------------------------------------
-Calibration
-------------------------------------------------------------------------------
-
-Calibration is available for some direct-input devices (touch screens,
-graphics tablets, etc.). The purpose of calibration is to ensure the input
-lines up with the output and the configuration data is a transformation
-matrix. It is thus not expected that the user sets this option. The desktop
-environment should provide an interface for this.
-
-------------------------------------------------------------------------------
-Rotation
-------------------------------------------------------------------------------
-
-The device rotation applies a corrective angle to relative input events,
-allowing the device to be used e.g. sideways or upside-down. For example, a
-trackball may be used in a 90° rotated position for accessibility reasons -
-such a rotated position allows triggering the buttons with the thumb or
-the non-dominant hand.
-
-Note that where a device rotation is higher than 160 but less than 200 degrees,
-the direction of wheels is also inverted. For all other angles, the wheel
-direction is left as-is.
-
-.. _config-tablet-pressure-range:
-
-------------------------------------------------------------------------------
-Tablet tool pressure range
-------------------------------------------------------------------------------
-
-The pressure range on a :ref:`Tablet tool <tablet-tools>` can be reduced
-from the full available hardware range to a subset of that range. The effect
-of this is that the tablet will not register pressure below the given
-the given threshold is met, and will reach the maximum logical pressure
-before the maximum hardware-supported pressure is reached.
-
-See :ref:`tablet-pressure-range` for more info.
-
-.. _config-tablet-eraser-buttons:
-
-------------------------------------------------------------------------------
-Tablet tool eraser buttons
-------------------------------------------------------------------------------
-
-On many contemporary :ref:`Tablet tools <tablet-tools>` one button is hardcoded
-in firmware to emulate an eraser. This button can be remapped to provide
-a normal stylus button instead.
-
-See :ref:`tablet-eraser-button` for more info.
-
-------------------------------------------------------------------------------
-Area configuration
-------------------------------------------------------------------------------
-
-Area configuration is available for some indirect input devices such as
-graphics tablets. This configuration allows reducing the active area of
-such a device to a subset of the physically possible area.
-
-An example use-case for this is to match the aspect ratio of the device to that
-of the screen.
-
-See :ref:`tablet-area` for more info.

doc/user/contributing.rst

@@ -1,421 +0,0 @@
-
-.. _contributing:
-
-==============================================================================
-Contributing to libinput
-==============================================================================
-
-
-So you want to contribute to libinput? Great! We'd love to help you be a part
-of our community. Here is some important information to help you.
-
-.. contents::
-    :local:
-
-------------------------------------------------------------------------------
-Code of Conduct
-------------------------------------------------------------------------------
-
-As a freedesktop.org project, libinput follows the `freedesktop.org
-Contributor Covenant <https://www.freedesktop.org/wiki/CodeOfConduct>`_.
-
-Please conduct yourself in a respectful and civilised manner when
-interacting with community members on mailing lists, IRC, or bug trackers.
-The community represents the project as a whole, and abusive or bullying
-behaviour is not tolerated by the project.
-
-------------------------------------------------------------------------------
-Contact
-------------------------------------------------------------------------------
-
-Questions can be asked on ``#wayland`` on oftc or on the
-`wayland-devel@lists.freedesktop.org
-<https://lists.freedesktop.org/mailman/listinfo/wayland-devel>`_ mailing
-list.
-
-For IRC, ping user ``whot`` (Peter Hutterer, the libinput maintainer) though
-note that he lives on UTC+10 and thus the rest of the world is out of sync
-by default ;)
-
-For anything that appears to be device specific and/or related to a new
-feature, just file `an issue in our issue tracker
-<https://gitlab.freedesktop.org/libinput/libinput/issues>`_. It's usually the
-most efficient way to get answers.
-
-------------------------------------------------------------------------------
-What to work on?
-------------------------------------------------------------------------------
-
-If you don't already know what you want to improve or fix with libinput,
-then a good way of finding something is to search for the ``help needed``
-tag in our `issue tracker <https://gitlab.freedesktop.org/libinput/libinput/issues?label_name%5B%5D=help+needed>`_.
-These are issues that have been triaged to some degree and deemed to be a
-possible future feature to libinput.
-
-.. note:: Some of these issue may require specific hardware to reproduce.
-
-Another good place to help out with is the documentation. For anything you
-find in these pages that isn't clear enough please feel free to reword it
-and add what is missing.
-
-------------------------------------------------------------------------------
-Getting the code
-------------------------------------------------------------------------------
-
-The :ref:`building_libinput` have all the details but the short solution
-will be:
-
-::
-
-     $> git clone https://gitlab.freedesktop.org/libinput/libinput
-     $> cd libinput
-     $> meson setup --prefix=/usr builddir/
-     $> ninja -C builddir/
-     $> sudo ninja -C builddir/ install
-
-You can omit the last step if you only want to test locally.
-
-------------------------------------------------------------------------------
-Working on the code
-------------------------------------------------------------------------------
-
-If you are planning to send patches, it's a good idea to set up
-`pre-commit <https://pre-commit.com/>`_ with these commands::
-
-     $> pre-commit install
-     $> pre-commit install --hook-type pre-push
-
-This will check a few things before you commit and/or push to your repos to
-reduce the turnaround time for some common mistakes.
-
-libinput has a roughly three-parts architecture:
-
--  the front-end code which handles the ``libinput_some_function()`` API calls in ``libinput.c``
--  the generic evdev interface handling which maps those API calls to the
-   backend calls (``evdev.c``).
-- there are device-specific backends which do most of the actual work -
-  ``evdev-mt-touchpad.c`` is the one for touchpads for example.
-
-In general, things that only affect the internal workings of a device only
-get implemented in the device-specific backend. You only need to touch the
-API when you are adding configuration options. For more details, please read
-the :ref:`architecture` document. There's also a `blog post describing the
-building blocks
-<https://who-t.blogspot.com/2019/03/libinputs-internal-building-blocks.html>`_
-that may help to understand how it all fits together.
-
-Documentation is in ``/doc/api`` for the doxygen-generated API documentation.
-These are extracted from the libinput source code directly. The
-documentation you're reading right now is in ``/doc/user`` and generated with
-sphinx. Simply running ``ninja -C builddir`` will rebuild it and the final
-product ends up in ``builddir/Documentation``.
-
-------------------------------------------------------------------------------
-Testing the code
-------------------------------------------------------------------------------
-
-libinput provides a bunch of :ref:`tools` to debug any changes - without
-having to install libinput.
-
-The two most useful ones are :ref:`libinput debug-events
-<libinput-debug-events>` and :ref:`libinput debug-gui <libinput-debug-gui>`.
-Both tools can be run from the build directory directly and are great for
-quick test iterations::
-
-  $> sudo ./builddir/libinput-debug-events --verbose
-  $> sudo ./builddir/libinput-debug-gui --verbose
-
-The former provides purely textual output and is useful for verifying event
-streams from buttons, etc. The latter is particularly useful when you are
-trying to debug pointer movement or placement. ``libinput debug-gui`` will
-also visualize the raw data from the device so you can compare pointer
-behavior with what comes from the kernel.
-
-These tools create a new libinput context and will not affect your session's
-behavior. Only once you've installed libinput and restarted your session
-will your changes affect the X server/Wayland compositor.
-
-Once everything seems to be correct, it's time to run the
-:ref:`test-suite`::
-
-  $> sudo ./builddir/libinput-test-suite
-
-This test suite can take test names etc. as arguments, have a look at
-:ref:`test-suite` for more info. There are a bunch of other tests that are
-run by the CI on merge requests, you can run those locally with ::
-
-  $> sudo ninja -C builddir check
-
-So it always pays to run that before submitting. This will also run the code
-through valgrind and pick up any memory leaks.
-
-.. _contributing_submitting_code:
-
-------------------------------------------------------------------------------
-Submitting Code
-------------------------------------------------------------------------------
-
-Any patches should be sent via a Merge Request (see the `GitLab docs
-<https://docs.gitlab.com/ce/gitlab-basics/add-merge-request.htm>`_)
-in the `libinput GitLab instance hosted by freedesktop.org
-<https://gitlab.freedesktop.org/libinput/libinput>`_.
-
-.. note:: freedesktop.org's GitLab instance has restrictions to prevent Spam
-          and you cannot fork libinput until you have successfully
-          `applied for fork permissions <https://gitlab.freedesktop.org/freedesktop/freedesktop/-/wikis/home>`_.
-
-Below are the steps required to submit a merge request. They do not
-replace `learning git <https://git-scm.com/doc>`__ but they should be
-sufficient to make some of the more confusing steps obvious.
-
-- `Register an account <https://gitlab.freedesktop.org/users/sign_in>`_ in
-  the freedesktop.org GitLab instance and
-  `apply for fork permissions <https://gitlab.freedesktop.org/freedesktop/freedesktop/-/wikis/home>`_.
-- `Fork libinput <https://gitlab.freedesktop.org/libinput/libinput/-/forks/new>`_
-  into your username's namespace. Select public visibility.
-- Get libinput's main repository. git will call this repository ``origin``. ::
-
-    git clone https://gitlab.freedesktop.org/libinput/libinput.git
-
-- Add the forked git repository to your remotes (replace ``USERNAME``
-  with your username). git will call this repository ``gitlab``. ::
-
-    cd /path/to/libinput.git
-    git remote add gitlab git@ssh.gitlab.freedesktop.org:USERNAME/libinput.git
-    git fetch gitlab
-
-- Create a new branch and commit your changes to that branch. ::
-
-    git switch -C mynewbranch
-    # edit files, make changes
-    git add file1 file2
-    git commit -s
-    # edit commit message in the editor
-
-  Replace ``mynewbranch`` (here and in the commands below) with a meaningful
-  name. See :ref:`contributing_commit_messages` for details on the commit
-  message format.
-
-- Push your changes to your fork and submit a merge request ::
-
-    git push gitlab mynewbranch
-
-  This command will print the URL to file a merge request, you then only
-  have to click through. Alternatively you can go to:
-
-    https://gitlab.freedesktop.org/USERNAME/libinput/merge_requests
-
-  Select your branch name to merge and ``libinput/libinput`` ``main`` as target branch.
-
-- Verify that the CI completes successfully by visiting the merge request
-  page. A successful pipeline shows only green ticks, failure is indicated
-  by a red cross or a yellow exclamation mark (see
-  the `GitLab Docs
-  <https://docs.gitlab.com/ee/ci/pipelines/#pipeline-mini-graphs>`__). For
-  details about the failures, click on the failed jobs in the pipelines
-  and/or click the ``Expand`` button in the box for the test summaries.
-
-  A merge request without a successful pipeline may never be looked at by a
-  maintainer.
-
-- If changes are requested by the maintainers, please **amend** the
-  commit(s) and **force-push** the updated branch. ::
-
-    # edits in file foo.c
-    git add foo.c
-    git commit --amend
-    git push -f gitlab mynewbranch
-
-  A force-push will re-trigger the CI and notify the merge request that new
-  changes are available.
-
-  If the branch contains more than one commit, please look at
-  `git interactive rebases
-  <https://git-scm.com/book/en/v2/Git-Tools-Rewriting-History>`__
-  to learn how to change multiple commits, or squash new changes into older
-  commits.
-
-------------------------------------------------------------------------------
-Commit History
-------------------------------------------------------------------------------
-
-libinput strives to have a
-`linear, 'recipe' style history <http://www.bitsnbites.eu/git-history-work-log-vs-recipe/>`_
-This means that every commit should be small, digestible, stand-alone, and
-functional. Rather than a purely chronological commit history like this: ::
-
-	doc: final docs for view transforms
-	fix tests when disabled, redo broken doc formatting
-	better transformed-view iteration (thanks Hannah!)
-	try to catch more cases in tests
-	tests: add new spline test
-	fix compilation on splines
-	doc: notes on reticulating splines
-	compositor: add spline reticulation for view transforms
-
-We aim to have a clean history which only reflects the final state, broken up
-into functional groupings: ::
-
-	compositor: add spline reticulation for view transforms
-	compositor: new iterator for view transforms
-	tests: add view-transform correctness tests
-	doc: fix Doxygen formatting for view transforms
-
-This ensures that the final patch series only contains the final state,
-without the changes and missteps taken along the development process.
-
-The first line of a commit message should contain a prefix indicating
-what part is affected by the patch followed by one sentence that
-describes the change. For example: ::
-
-	touchpad: add software button behavior
-	fallback: disable button debouncing on device foo
-
-If in doubt what prefix to use, look at other commits that change the
-same file(s) as the patch being sent.
-
-.. _contributing_commit_messages:
-
-------------------------------------------------------------------------------
-Commit Messages
-------------------------------------------------------------------------------
-
-When you re-send patches, revised or not, it would be very good to document the
-changes compared to the previous revision in the commit message and/or the
-merge request. If you have already received Reviewed-by or Acked-by tags, you
-should evaluate whether they still apply and include them in the respective
-commit messages. Otherwise the tags may be lost, reviewers miss the credit they
-deserve, and the patches may cause redundant review effort.
-
-If your commit solves a GitLab issue, add a ``Closes:`` tag followed by the
-issue number at the end of your commit message. For example: ::
-
-  Closes: #974
-
-If your commit fixes an issue introduced by another commit, use a ``Fixes`` tag
-followed by the first 12 characters of the SHA-1 ID and the commit one line
-summary at the end of your commit message. For example: ::
-
-  Fixes: 123456789012 ("The commit that caused the issue")
-
-For further reading, please see
-`'on commit messages' <http://who-t.blogspot.de/2009/12/on-commit-messages.html>`_
-as a general guideline on what commit messages should contain.
-
-------------------------------------------------------------------------------
-Coding Style
-------------------------------------------------------------------------------
-
-Please see the `CODING_STYLE.md
-<https://gitlab.freedesktop.org/libinput/libinput/blob/main/CODING_STYLE.md>`_
-document in the source tree.
-
-------------------------------------------------------------------------------
-Tracking patches and follow-ups
-------------------------------------------------------------------------------
-
-Once submitted to GitLab, your patches will be reviewed by the libinput
-development team on GitLab. Review may be entirely positive and result in your
-code landing instantly, in which case, great! You're done. However, we may ask
-you to make some revisions: fixing some bugs we've noticed, working to a
-slightly different design, or adding documentation and tests.
-
-If you do get asked to revise the patches, please bear in mind the notes above.
-You should use ``git rebase -i`` to make revisions, so that your patches
-follow the clear linear split documented above. Following that split makes
-it easier for reviewers to understand your work, and to verify that the code
-you're submitting is correct.
-
-A common request is to split single large patch into multiple patches. This can
-happen, for example, if when adding a new feature you notice a bug in
-libinput's core which you need to fix to progress. Separating these changes
-into separate commits will allow us to verify and land the bugfix quickly,
-pushing part of your work for the good of everyone, whilst revision and
-discussion continues on the larger feature part. It also allows us to direct
-you towards reviewers who best understand the different areas you are
-working on.
-
-When you have made any requested changes, please rebase the commits, verify
-that they still individually look good, then force-push your new branch to
-GitLab. This will update the merge request and notify everyone subscribed to
-your merge request, so they can review it again.
-
-There are also many GitLab CLI clients, if you prefer to avoid the web
-interface. It may be difficult to follow review comments without using the
-web interface though, so we do recommend using this to go through the review
-process, even if you use other clients to track the list of available
-patches.
-
-------------------------------------------------------------------------------
-Failed pipeline errors
-------------------------------------------------------------------------------
-
-After submitting your merge request to GitLab, you might receive an email
-informing you that your pipeline failed.
-
-Visit your merge request page and check the `pipeline mini graph
-<https://docs.gitlab.com/ee/ci/pipelines/#pipeline-mini-graphs>`_ to know which
-step failed.
-
-Follow the appropriate section to fix the errors.
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Committed gitlab-ci.yml differs from generated gitlab-ci.yml. Please verify
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-When your merge request modifies the CI templates, you might see this error
-mainly due two reasons: the wrong file was modified and/or
-``ci-fairy generate-template`` wasn't run.
-
-``.gitlab-ci.yaml`` is auto generated, changes should be made in:
-
-- ``.gitlab-ci/ci.template``
-
-- ``.gitlab-ci/config.yaml``
-
-Once the changes are ready, run
-`ci-fairy <https://freedesktop.pages.freedesktop.org/ci-templates/ci-fairy.html#templating-gitlab-ci-yml>`_
-to update ``.gitlab-ci.yaml``: ::
-
-  ci-fairy generate-template
-
-Finally, force-push you changes. See :ref:`contributing_submitting_code` for
-more details.
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Build errors
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Usually, checking the CI log is enough to catch this errors. However, your merge
-request is built using different configurations you might have not tested.
-
-In order to fix this kind of problems, you can compile libinput using the same
-flags used by the CI.
-
-For example, if an error is found in the ``build-no-libwacom`` step, open the
-log and search the build options: ::
-
-  [...]
-  + rm -rf 'build dir'
-  + meson 'build dir' -Dlibwacom=false
-  The Meson build system
-  [...]
-
-Use the same flags to fix the issue and force-push you changes. See
-:ref:`contributing_submitting_code` for more details.
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Test errors
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The test suite is run for your merge request to check for bugs, regressions and
-memory leaks among other issues.
-
-Open the CI error log and search for a message similar to: ::
-
-  :: Failure: ../test/test-touchpad.c:465: touchpad_2fg_scroll_slow_distance(synaptics-t440)
-
-See :ref:`test-suite` to learn how to run the failing tests.
-
-Once the tests are fixed, force-push you changes. See
-:ref:`contributing_submitting_code` for more details.

doc/user/dependencies.rst

@@ -1,21 +0,0 @@
-.. warning:: The package lists are autogenerated from the `CI <https://gitlab.freedesktop.org/libinput/libinput/-/tree/master/.gitlab-ci.yml>`_.
-
-- Fedora: ::
-
-    dnf install @FEDORA_PACKAGES@
-
-- Ubuntu: ::
-
-    apt install @UBUNTU_PACKAGES@
-
-- Debian: ::
-
-    apt install @DEBIAN_PACKAGES@
-
-- Arch: ::
-
-    pacman -S @ARCH_PACKAGES@
-
-- Alpine: ::
-
-    apk add @ALPINE_PACKAGES@

doc/user/development.rst

@@ -1,53 +0,0 @@
-.. _development:
-
-==============================================================================
-Information for developers
-==============================================================================
-
-Below is a list of topics of interest to developers, divided into
-information for those :ref:`using_libinput_as_library` in a Wayland compositor
-or other project. The :ref:`hacking_on_libinput` section applies to developers working on
-libinput itself.
-
-.. note:: If you use or work on libinput you should get in touch with the
-          libinput developers on the wayland-devel@lists.freedesktop.org
-          mailing lists
-
-.. _using_libinput_as_library:
-
-------------------------------------------------------------------------------
-Using libinput as library
-------------------------------------------------------------------------------
-
-See :ref:`building_against` for information on how to integrate libinput
-with your project's build system.
-
-.. note:: **libinput's API documentation is available here:**
-           http://wayland.freedesktop.org/libinput/doc/latest/api/
-
-
-Topics below explain some behaviors of libinput.
-
-.. toctree::
-   :maxdepth: 1
-
-   absolute-axes.rst
-   absolute-coordinate-ranges.rst
-   normalization-of-relative-motion.rst
-   seats.rst
-   timestamps.rst
-   wheel-api.rst
-
-.. _hacking_on_libinput:
-
-------------------------------------------------------------------------------
-Hacking on libinput
-------------------------------------------------------------------------------
-
-.. toctree::
-   :maxdepth: 1
-
-   architecture
-   test-suite.rst
-   pointer-acceleration.rst
-   device-configuration-via-udev.rst

doc/user/device-configuration-via-udev.rst

@@ -1,245 +0,0 @@
-.. _udev_config:
-
-==============================================================================
-Static device configuration via udev
-==============================================================================
-
-libinput supports some static configuration through udev properties.
-These properties are read when the device is initially added
-to libinput's device list, i.e. before the
-**LIBINPUT_EVENT_DEVICE_ADDED** event is generated.
-
-The following udev properties are supported:
-
-LIBINPUT_CALIBRATION_MATRIX
-    Sets the calibration matrix, see
-    **libinput_device_config_calibration_get_default_matrix()**. If unset,
-    defaults to the identity matrix.
-
-    The udev property is parsed as 6 floating point numbers separated by a
-    single space each (scanf(3) format ``"%f %f %f %f %f %f"``).
-    The 6 values represent the first two rows of the calibration matrix as
-    described in **libinput_device_config_calibration_set_matrix()**.
-
-    Example values are: ::
-
-          ENV{LIBINPUT_CALIBRATION_MATRIX}="1 0 0 0 1 0" # default
-          ENV{LIBINPUT_CALIBRATION_MATRIX}="0 -1 1 1 0 0" # 90 degree clockwise
-          ENV{LIBINPUT_CALIBRATION_MATRIX}="-1 0 1 0 -1 1" # 180 degree clockwise
-          ENV{LIBINPUT_CALIBRATION_MATRIX}="0 1 0 -1 0 1" # 270 degree clockwise
-          ENV{LIBINPUT_CALIBRATION_MATRIX}="-1 0 1 0 1 0" # reflect along y axis
-
-
-LIBINPUT_DEVICE_GROUP
-    A string identifying the **libinput_device_group** for this device. Two
-    devices with the same property value are grouped into the same device group,
-    the value itself is irrelevant otherwise.
-
-LIBINPUT_IGNORE_DEVICE
-    If set to anything other than "0", the device is ignored by libinput.
-    See :ref:`ignoring_devices` for more details.
-
-ID_SEAT
-    Assigns the physical :ref:`seat <seats>` for this device. See
-    **libinput_seat_get_physical_name()**. Defaults to "seat0".
-
-ID_INPUT
-    If this property is set, the device is considered an input device. Any
-    device with this property missing will be ignored, see :ref:`udev_device_type`.
-
-ID_INPUT_KEYBOARD, ID_INPUT_KEY, ID_INPUT_MOUSE, ID_INPUT_TOUCHPAD, ID_INPUT_TOUCHSCREEN, ID_INPUT_TABLET, ID_INPUT_JOYSTICK, ID_INPUT_ACCELEROMETER
-    If any of the above is set, libinput initializes the device as the given
-    type, see :ref:`udev_device_type`. Note that for historical reasons more than
-    one of these may be set at any time, libinput will select only one of these
-    to determine the device type. To ensure libinput selects the correct device
-    type, only set one of them.
-
-WL_SEAT
-    Assigns the logical :ref:`seat <seats>` for this device. See
-    **libinput_seat_get_logical_name()** context. Defaults to "default".
-
-MOUSE_DPI
-    HW resolution and sampling frequency of a relative pointer device.
-    See :ref:`motion_normalization` for details.
-
-MOUSE_WHEEL_CLICK_ANGLE
-    The angle in degrees for each click on a mouse wheel. See
-    **libinput_pointer_get_axis_source()** for details.
-
-
-Below is an example udev rule to assign "seat1" to a device from vendor
-``0x012a`` with the model ID of ``0x034b``. ::
-
-   $ cat /etc/udev/rules.d/99-my-device-is-on-seat1.rules
-     ACTION!="remove", KERNEL=="event[0-9]*", \
-     ENV{ID_VENDOR_ID}=="012a", \
-     ENV{ID_MODEL_ID}=="034b", \
-     ENV{ID_SEAT}="seat1"
-
-
-
-.. _udev_device_type:
-
-------------------------------------------------------------------------------
-Device type assignment via udev
-------------------------------------------------------------------------------
-
-libinput requires the **ID_INPUT** property to be set on a device,
-otherwise the device will be ignored. In addition, one of
-**ID_INPUT_KEYBOARD, ID_INPUT_KEY, ID_INPUT_MOUSE, ID_INPUT_TOUCHPAD,
-ID_INPUT_TOUCHSCREEN, ID_INPUT_TABLET, ID_INPUT_JOYSTICK,
-ID_INPUT_ACCELEROMETER** must be set on the device to determine the
-device type. The usual error handling applies within libinput and a device
-type label does not guarantee that the device is initialized by libinput.
-If a device fails to meet the requirements for a device type (e.g. a keyboard
-labelled as touchpad) the device will not be available through libinput.
-
-Only one device type should be set per device at a type, though libinput can
-handle some combinations for historical reasons.
-
-Below is an example udev rule  to remove an **ID_INPUT_TOUCHPAD** setting
-and change it into an **ID_INPUT_TABLET** setting. This rule would apply
-for a device with the vendor/model ID of ``012a``/``034b``. ::
-
-   $ cat /etc/udev/rules.d/99-my-device-is-a-tablet.rules
-     ACTION!="remove", KERNEL=="event[0-9]*", \
-     ENV{ID_VENDOR_ID}=="012a", \
-     ENV{ID_MODEL_ID}=="034b", \
-     ENV{ID_INPUT_TOUCHPAD}="", ENV{ID_INPUT_TABLET}="1"
-
-
-.. _model_specific_configuration:
-
-------------------------------------------------------------------------------
-Model-specific configuration
-------------------------------------------------------------------------------
-
-As of libinput 1.12, model-specific configuration is stored in the
-:ref:`device-quirks` and not in the hwdb anymore. Please see
-:ref:`device-quirks` for
-details.
-
-.. _model_specific_configuration_x220fw81:
-
-..............................................................................
-Lenovo x220 with touchpad firmware v8.1
-..............................................................................
-
-The property **LIBINPUT_MODEL_LENOVO_X220_TOUCHPAD_FW81** may be set by a
-user in a local hwdb file. This property designates the touchpad on a Lenovo
-x220 with a touchpad firmware version 8.1. When this firmware version is
-installed, the touchpad is imprecise. The touchpad device does not send
-continuous x/y axis position updates, a behavior also observed on its
-successor model, the Lenovo x230 which has the same firmware version. If the
-above property is set, libinput adjusts its behavior to better suit this
-particular model.
-
-The touchpad firmware version cannot be detected automatically by libinput,
-local configuration is required to set this property. Refer to the libinput
-model quirks hwdb for instructions.
-
-This property must not be used for any other purpose, no specific behavior
-is guaranteed.
-
-
-.. _hwdb:
-
-------------------------------------------------------------------------------
-Configuring the hwdb
-------------------------------------------------------------------------------
-
-This section outlines how to query the
-`udev hwdb <https://www.freedesktop.org/software/systemd/man/hwdb.html>`_
-and reload properties so they are available to libinput.
-
-The hwdb contains a set of match rules that assign udev properties that are
-available to libinput when the device is connected and/or libinput is
-initialized. This section only describes the hwdb in relation to libinput,
-it is not a full documentation on how the hwdb works.
-
-libinput's use of the hwdb is limited to properties systemd and custom
-rules files (where available) provide. Hardware-specific quirks as used by
-libinput are in the :ref:`device-quirks` system.
-
-.. _hwdb_querying:
-
-..............................................................................
-Querying the hwdb
-..............................................................................
-
-libinput only uses device nodes in the form of ``/dev/input/eventX`` where X
-is the number of the specific device. Running ``libinput debug-events`` lists
-all devices currently available to libinput and their event node name: ::
-
-    $> sudo libinput debug-events
-    -event2   DEVICE_ADDED     Power Button                      seat0 default group1  cap:k
-    -event5   DEVICE_ADDED     Video Bus                         seat0 default group2  cap:k
-    -event0   DEVICE_ADDED     Lid Switch                        seat0 default group3  cap:S
-
-    ...
-
-Note the event node name for your device and translate it into a syspath in
-the form of ``/sys/class/input/eventX``. This path can be supplied to ``udevadm
-info`` ::
-
-    $> udevadm info
-    P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0/event0
-    N: input/event0
-    E: DEVNAME=/dev/input/event0
-    E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0/event0
-    E: ID_INPUT=1
-    E: ID_INPUT_SWITCH=1
-    E: MAJOR=13
-    E: MINOR=64
-    E: SUBSYSTEM=input
-    E: TAGS=:power-switch:
-    E: USEC_INITIALIZED=7167898
-
-Lines starting with ``E:`` are udev properties available to libinput. For
-example, the above device's ``ID_INPUT_SWITCH`` property will cause libinput
-to treat this device as switch device.
-
-
-.. _hwdb_reloading:
-
-..............................................................................
-Reloading the hwdb
-..............................................................................
-
-The actual hwdb is stored in binary file on-disk and must be updated
-manually whenever a ``.hwdb`` file changes. This is required both when a user
-manually edits the ``.hwdb`` file but also when the git tree is updated (and
-that update causes a hwdb change).
-
-To update the binary file on-disk, run: ::
-
-    sudo systemd-hwdb update
-
-Then, to trigger a reload of all properties on your device, run: ::
-
-    sudo udevadm trigger /sys/class/input/eventX
-
-Then check with ``udevadm info`` whether the properties were updated, see
-:ref:`hwdb_querying`. If a new property does not appear on the device, use ``udevadm
-test`` to check for error messages by udev and the hwdb (e.g. syntax errors
-in the udev rules files). ::
-
-    sudo udevadm test /sys/class/input/eventX
-
-.. warning::  ``udevadm test`` does not run commands specified in ``RUN``
-	      directives. This affects the udev properties relying on e.g.
-	      the udev keyboard builtin such as the :ref:`touchpad_jitter`
-	      workarounds.
-
-.. _hwdb_modifying:
-
-..............................................................................
-Modifying the hwdb
-..............................................................................
-
-.. warning:: This section has been removed as it no longer applies in libinput 1.12
-             and later. libinput users should not need to modify the hwdb, any
-             device-specific quirks must go in to the :ref:`device-quirks` system.
-
-For information about older libinput versions, please see the documentation
-for your version available in: https://wayland.freedesktop.org/libinput/doc/