Quite a few bugs are caused by touchpad ranges being out of whack. If we get
input events significantly outside the expected range (5% width/height as
error margin) print a warning to the log.
And add a new doc page to explain what is happening and how to fix it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit faf7a6107f)
The Wacom Express Key Remote sends the serial number via EV_MSC. At some later
point we'll need the serial to match the LEDs correctly but for now we can
ignore them.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
(cherry picked from commit 0933650f66)
This was introduced for bug 94379 - an X1 Carbon 3rd. Other touchpads have
different pressure change ranges, causing this condition to trigger
randomly and resulting in a jerky pointer motion.
For now, reduce the check to the *50 and *60 series touchpads until we have
data for more touchpads that we can add one-by-one.
https://bugs.freedesktop.org/show_bug.cgi?id=95393
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 2f5231cc88)
Introduced in 6ad303b as part of an code flow optimization, causing any 3+
finger gesture to be posted as swipe gesture, even when gestures are disabled.
However, the event is filtered in the higher levels with a bug message printed
to the log.
Don't post swipe gestures for devices where gestures are disabled.
https://bugs.freedesktop.org/show_bug.cgi?id=95314
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 98ee1791ca)
It's a bit hard to find what can be configured in the wall of text that is the
doxygen output. Add a TOC of the various options so it's easy to get a quick
grasp.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a touch moves by more than 20mm within a single frame, reset the motion
history, effectively discarding the movement. This is a relatively common bug
and almost always needs a kernel fix, so add an explanatory page to the docs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The "latest" documentation link is the location for the master branch,
released versions have their own directory on the server.
The micro-versions of 90 and above are used for snapshots and release
candidates, so whenever we have a micro version of >= 90 we still want to link
to the "latest" documentation. In all other cases, we link to the current
release.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
25a9f39 changed the range to [-1, 1] but that's incorrect for the distance
values. Split the normalization up into two functions and make sure our
distance range is correct.
https://bugs.freedesktop.org/show_bug.cgi?id=95074
And while we're at it, sneak in a test for pressure ranges too.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Logitech does not sell internal touchpads, the closest ones are the TK820 and
the K400 series devices. Neither of which need DWT, the touchpad is next to
the keyboard.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
This interface handles the buttons on the physical tablet itself, including
the touch ring and the strip.
A notable difference to other libinput interfaces here is that we do not use
linux/input.h event codes for buttons. Instead, the buttons are merely
numbered sequentially, starting at button 1. This means:
* the API is different, instead of get_button() we have get_button_number() to
drive the point home
* there is no seat button count. pads are inherently different devices and
compositors should treat them as such. The seat button count makes sense
when you want to know how many devices have BTN_LEFT down, but it makes no
sense for buttons where all the semantics are handled by the compositor
anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
If a touchscreen has a fuzz value use it for motion hysteresis similar to how
we do it for a touchpad. This stops pointer wobbles as seen in
https://bugs.freedesktop.org/show_bug.cgi?id=94918
It's up to the system to override or set the kernel's fuzz value correctly,
i.e. a udev hwdb entry is required where the kernel driver does not set it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
If some elantech touchpads require a hysteresis, let's use some more generic
tag for those touchpads that require correct handling of pointer wobbles.
https://bugs.freedesktop.org/show_bug.cgi?id=94897
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
When the touchpad is disabled, the top software button on the Lenovo T440
series touchpads currently enlarge by a factor of 1.5 (to 15mm). This is not
enough, a user has to rotate the wrist quite uncomfortable when using
the left mouse button.
When the touchpad itself is off anyway we can extend the size of the top
software buttons to the factor 3, i.e. 30mm.
Signed-off-by: Peter Frühberger <peter.fruehberger@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Rather than checking the physical key's state, set a flag for the button to be
down. This enables us to use non-physical buttons (middle button emulation).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The only difference between evdev_pointer_notify_physical_button() and
evdev_pointer_notify_button() is that the former filters out middle button
emulations where applicable.
Doing so effectively disables using a button for scrolling that is also used
for middle button emulation. This is intentional, it is a niche use-case
(and prone to timer races). OTOH some devices exist that only have two buttons
on the pointing stick and require button scrolling. This use-case is given
preference.
https://bugs.freedesktop.org/show_bug.cgi?id=94856
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This is especially a problem for the cursor tool which can be legitimately
left on the tablet. It wobbles by a couple of device units, resulting in
continuous axis updates to the caller. Pre-filter any of these events by the
axis' fuzz value so we don't even process them.
For ABS_DISTANCE which doesn't have a fuzz we hard-code a minimum fuzz of 2.
This should eventually land in the kernel though.
https://bugs.freedesktop.org/show_bug.cgi?id=94892
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Supposed to be [-1, 1] but we only generated [0, 1]
Reported-by: Carlos Garnacho <carlosg@gnome.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Carlos Garnacho <carlosg@gnome.org>
Makes it easier to determine if this is a libinput bug or something triggered
by the caller waiting too long to call libinput_dispatch().
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We just returned the current profile instead of the default one. Fix
that.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Middle button interaction is most commonly to paste and it is a single-event
interaction (button press). We provided middle button in software button mode
by emulating it with a two-finger press with L+R down at the same time. This
is also what many touchpads are spectacularly bad at, it is very common to
detect the physical button down event before the second finger registers,
resulting in left or right clicks where a middle button should be triggered.
Unless the fingers are resting on the touchpad for at least one scanout, the
success rate for middle button emulation is only at 70% or so.
This patch adds a 25%-width middle button area between the left and the right
software button, everything else stays the same. To avoid immediate breakage,
the middle button emulation remains but may be removed in the future.
The doc is updated to only refer to the middle button area now.
https://bugs.freedesktop.org/show_bug.cgi?id=94755
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The previous code would swap the top software buttons depending on the
touchpad's left-handed setting, not the trackpoint setting. Changing both
devices to left-handed resulted in a double-swap, i.e. the trackpoint was
always right-handed.
https://bugs.freedesktop.org/show_bug.cgi?id=94733
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Resetting the motion history has the side-effect of swallowing movements, we
don't calculate deltas until we have 4 motion events. During a finger release,
we're likely to get a large pressure change between two events, resetting the
motion history prevents the cursor from jumping on release.
The value of 7 found by trial-and-error, tested on the T440 and T450 hardware.
The absolute value is highly variable but recordings show that the pressure
changes only by 1 or 2 units during normal interaction. Higher pressure
changes are during finger position changes but since those should not cause a
jump anyway, we tend to win there too.
Currently only enabled for negative pressure changes, let's see how we go with
that.
https://bugs.freedesktop.org/show_bug.cgi?id=94379
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Because our delta calculation factors in previous events on touchpads (to
reduce jitter) we may get a nonzero delta if we have an event that doesn't
actually change x or y.
Drop the t->dirty workaround introduced in a608d9d, an event that virtually
disappears can mess up our state machines.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Left over from an earlier version of the t450 quirk (see a608d9dc2c) and
unused in the merged version.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The touchpad's sensors are too far apart (or the firmware interferes), causing
in a jerky movement visible especially on slow motion. We get a bunch of
normal motion events, then only ABS_MT_PRESSURE updates without x/y updates.
After about one mm of movement x/y updates resume, with the first event
covering the distance between the last motion event. That event is usually
accelerated and thus causes a large jump. Subsequent events are sufficiently
fine-grained again.
This patch counts the number of non-motion events. Once we hit 10 in a row, we
mark the first motion update as non-dirty, effectively discarding the motion
and thus stopping the pointer jumps.
https://bugs.freedesktop.org/show_bug.cgi?id=94379
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
The HUION 580 has a "consumer control" event node that has an ABS_VOLUME, keys
and a REL_HWHEEL. It has the same VID/PID as the pen tablet and libwacom
labels it as ID_INPUT_TABLET. This causes a crash later when we try to init
pointer acceleration for a device that doesn't have axes.
https://bugzilla.redhat.com/show_bug.cgi?id=1314955
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Had this in a private bug report recently. Missing hooks for open/close just
segfault with little information to debug. Add an assert, this is definitely a
bug in the caller and we don't need to recover from that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
