Devices tagged as accelerometers may also be other devices like tablet pads.
Only ignore pure accelerometer devices but disable the accelerometer axes for
devices that have multiple types.
https://bugs.freedesktop.org/show_bug.cgi?id=102100
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
The recommended way to have libinput ignore specific devices so far was to
remove the ID_INPUT* properties from the device. That may also affect other
pieces of the stack that need access to this device.
For the niche case of a device that should only be ignored by libinput but
otherwise be treated normally by the system, we now support the
LIBINPUT_IGNORE_DEVICE property.
If the property is set to "0", it's equivalent to being unset. This gets
around some technical limitations in udev where unsetting a property is
impossible via a hwdb entry.
https://bugs.freedesktop.org/show_bug.cgi?id=102229
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
It seems the unit tests rely on another part of <linux/input.h> which I
missed in the previous commit (5cf4b35b).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Various files use #include <linux/input.h> and, if the system input.h is
too old, will fail to compile. Use the internal copy by adding -Iinclude
to the build command lines. This was the case in the old autotools build
system.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The lid dispatch interface is a one-trick pony and can only handle SW_LID. It
ignores other switches but crashes on any event type other than EV_SW and
EV_SYN. Disable those types so we just ignore the event instead of asserting.
https://bugs.freedesktop.org/show_bug.cgi?id=101853
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Some devices have worn-out switches or just cheap switches that trigger
multiple button events for each press. These can be identified by unfeasably
short time deltas between the release and the next press event. In the
recordings I've seen so far, that timeout is 8ms.
We have a two-stage behavior: by default, we do not delay any events but we
monitor timestamps. The first time a bouncing button is detected we switch to
debounce mode. From then on, release events are delayed slightly to check for
subsequent button events. If one occurs, the releas and press are filtered. If
none occurs, the release event is passed to the caller.
https://bugs.freedesktop.org/show_bug.cgi?id=100057
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Trackpoints can send very different ranges between the various pressures.
Collect the data and print it out to get an idea of what ranges are realistic.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Triggered an error because we still used dep_libwacom unconditionally:
Meson encountered an error in file meson.build, line 76, column 0:
Unknown variable "dep_libwacom".
https://bugs.freedesktop.org/show_bug.cgi?id=101693
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
And update the documentation for how to use the new tool. It's much more
interactive than evemu and easier to grasp, so let's advertise that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Meson does not have a single style but the "foo : bar" style is more common in
the docs and in our meson.build file. Make it consistent.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Since meson commit ae9b238 "ninja: De-dup libraries and use --start/end-group"
we get linker errors with the tools. The duplication is apparently a bit too
agressive, swapping the order here make sure libinput isn't removed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reported-by: Michel Dänzer <michel@daenzer.net>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
This is the behavior of configure as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
All the other config options have a simple true/false as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
This is the first tool of many more to come to enable users to gather
information aobut their devices and/or usage of these devices. Previously,
these required the users to record events, submit them to a bugzilla, have me
run various scripts over it and then decree that the scripts have spoken.
Push some of this into the hands of the users so they can query the numbers
locally and start investigating (or at least get an idea of what's happening).
This tool measures the time deltas between touch up and touch down and prints
a basic summary, together with the ability to print a dat file with the data
for visualization by e.g. gnuplot. Eventually, more of the current analysis
scripts will be moved into this or other helpers.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Removed with commit 863fd1f0eb but now that we
exec each subcommand, the previous per-target compilation flags aren't needed
anymore. Build a static library to avoid rebuilding the source files for each
target.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
It's common enough for users to want to debug libinput behavior without
interference by the compositor or the X server. Being able to run a GUI
without having to compile from git is helpful.
Note that this changes --enable-event-gui autotools option to
--enable-debug-gui and the event-gui mesonconf option to debug-gui.
This also drops the standalone event-gui binary in both autotools and meson.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Chaining args together inside a single binary would be nice, but it gets nasty
quickly (as I found out adding 3, 4 extra commands). Switch over to using a
git-style exec-ing command where libinput merely changes argv[0] and then
executes whatever it assembled. And those binaries can hide in libexec so they
don't clutter up the global namespace.
This also makes it a lot easier to write man pages, adopt the same style as
git uses.
Compatibilty wrapper scripts are provided for libinput-list-devices and
libinput-debug events. These warn the user about the changed command, then
exec the new one. Expect these wrappers to be removed at some point in the
future.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
It's the same thing as libinput-debug-events and the newer "libinput
debug-events" command. The only reason it existed after we started providing
libinput-debug-events is the -no-install libtool flag that makes debugging
with gdb bearable.
Now that we're slowly moving to meson, this isn't needed anymore. If you want
to gdb directly in the source tree, build with meson.
Or use "libtool --mode=execute gdb" for an autotools build.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
To run valgrind properly, we need a couple of arguments passed in so we check
for leaks and don't fail on bits of the stack we don't control. Add a
mesontest setup for this, the lot can now be run by
mesontest --setup=valgrind
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This was motivated by the need to run the test runner from any directory, so
we need absolute paths to the files we copy.
Unfortunately, we can't get the absolute path from the object returned by
configure_file() and we can't feed that directly into join_paths() either.
So let' make it at least easier to handle: create a configure_file for all the
files we need (so they all end up in builddir/) and simply hardcode the name
for join_paths. Define the lot in config.h, no need to pass compiler flags
around.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This tool will eventually replace the different libinput tools we ship atm
with the various functionalities being commands to the single tool, rather
than multiple tools.
Right now, we still build both tools separately.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We never installed the device groups file for the tests, effectively relying
on a system copy to be installed already.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
v2:
- meson 0.40 requirement
- add_project_arguments() instead of add_global_arguments()
- use cc.get_define('static_assert')
- use config.set10 and config.set_quoted instead of manual handling
- more use of join_paths
- use files() for model quirks hwdb check
- update options to all state 'true' as default instead of variations of
'true', 'enabled' and 'yes'
v3:
- drop -Wall -Wextra and -g, let meson set that with warning_level/debug build
- add meson files to EXTRA_DIST
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
