../src/evdev-mt-touchpad-buttons.c:1233:16: warning: Value stored to 'button' during its initialization is never read [clang-analyzer-deadcode.DeadStores]
1233 | evdev_usage_t button = evdev_usage_from_uint32_t(0);
| ^~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1292>
No functional changes, all the actual interfaces now simply loop through
the frame instead of expecting the dispatcher to do so.
The mtdev code changed slightly since we can shortcut in the non-mtdev
case.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1245>
Some touchpads, notably those on the Dell XPS 15 9500, are prone to registering
touchpad clicks when the case is sufficiently flexed. Ignore these by
disregarding any clicks that are registered without touchpad touch.
Signed-off-by: Rob Glossop <robgssp@gmail.com>
The tool used to generate diagrams (draw.io) is now diagrams.net.
Update the URL in the comments.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
This assumption dates back roughly a decade when INPUT_PROP_BUTTONPAD was
introduced into the kernel. To my knowledge, devices right now erroneously
advertise INPUT_PROP_BUTTONPAD when they are not a clickpad (but then they
have BTN_RIGHT) or they lack INPUT_PROP_BUTTONPAD (and only have BTN_LEFT).
So let's change our assumption here - if a clickpad has a right button log the
kernel bug and continue with the assumption the device is a touchpad with
physical buttons.
To disable that warning, fix the kernel or add an AttrInputPropDisable quirk
for the device.
Fixes#595
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There is only one touchpad with a physical left button but no right button and
that is the old Apple touchpad, discontinued in 2008. Not a huge number of
those left, I assume.
So let's change our assumptions because these days the vast majority of
touchpads are clickpads - any touchpad that only has a left button is treated
as clickpad, even where the kernel doesn't set the INPUT_PROP_BUTTONPAD.
We do need to check for BTN_LEFT as well though, because Wacom touchpads (i.e.
the touch part of non-integrated Wacom tablets) don't have a left button
either.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Don't middle click on clickpads with click method clickfinger when more than
3 fingers are used.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
The way touchpads (generally) work is that they get the position of each
finger on each scanout. The kernel filters touches that haven't moved to
reduce bandwidth so any touch that is logically down that we don't see an
update for is in the same position as during the last scanout.
Previously, touches that didn't sent events were effectively ignored, causing
our jump detection to fail:
- time t0: touch moves to position x/y, motion history time is set to t0
- time t1..t5: touch remains at position for several frames, no updates to the
motion history
- time t6: touch jumps to position x+a/y+b
- tp_detect_jumps() sees the last update time is t0 which is too long ago
and exits without detecting a jump
This is fixed by pushing to the motion history any time we have *any* update -
if the touchpad notices a state change on any touch update all touches with
their current position, whether it changed or not.
This obsoletes the `time` field in the tp_touch struct, most of this patch is
passing down the current time to the few users of t->time.
Fixes#578
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
draw.io is playing up with old files and sending me into a redirect loop.
Duplicating files works but that changes the links. So to avoid dead links,
let's just remove the direct link and let anyone who cares enough about it ask
me.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Recent Apple touchpads use a proper Bluetooth vendor ID assigned to Apple instead of the USB one,
so this code would have to check for two vendor IDs and their udev types. However, we already
have that matching done via models in quirks, so let's just use that.
Signed-off-by: Sebastian Krzyszkowiak <dos@dosowisko.net>
This leaves a bug open, on a Lenovo T440 generation touchpad with top software
buttons, the button will not be leased correctly. This is caused by
device->is_suspended=true by the time we try to clear the state and the
button events thus getting filtered.
This used to affect all touchpads, this patch just moves it so it only affects
the T440-like devices now.
Fixes#233
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a 2fg scroll motion starts with both fingers in the bottom button area and
one finger moves into the main area before the other, we used to send motion
events for that finger. Once the second finger moved into the main area the
scroll was detected correctly but by then the cursor may have moved out of the
intended focus area.
We have two transitions where we may start sending motion events: when we move
out of the bottom area and when the finger moves by more than 5mm within the
button area. In both cases, check for any touches that are in the
bottom area and started at the 'same' time as our moving touch. Mark those as
'moved' to release them for gestures so we get the right finger count and
axis/gesture events instead of just motion events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's one state with a name longer than allocated but it's virtually never
triggered so let's just ignore the misalignment in that case.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Anything that merely requires a once-off check during initialization can just
use the quirks directly, no need to copy them over to the model flags.
Fixes#146
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No functional changes, anything that's in the top/bottom area but not in the
respective middle/right area is a left button.
Introduced by 13bda5adcb
Fixes coverity complaint about use of uninitialized variable.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The software button area is currently a partially-dead area. If the finger
moves into or out of the area pointer motion works. Finger motion within the
area however does not generate motion.
The main motivation for this was to avoid accidental pointer motion when a
button is pressed. This is required for stationary fingers but once you move a
significant distance, those bets are off.
So if the finger moves by more than 5mm from where it was put down, release it
and let it move the pointer.
The full impact is largely limited to horizontal movements within the button
area because:
- leaving the finger at the bottom area for 300ms without movement triggers
the thumb identification, so it won't move anyway.
- moving the finger north is likely to go off the button area before we
trigger this threshold.
https://gitlab.freedesktop.org/libinput/libinput/issues/86
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This has no real effect at the moment because the fallback interface doesn't
care much about SYN_REPORT, it processes events as they come in. But it's a
bug nonetheless, the process() callback expects correct event frames.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We used to completely ignore a finger that was within the top software button
area and then moved to the main area and remained there for a timeout. This
avoids erroneous pointer movements when the user moves the finger while using
the trackpoint.
But we also ignored physical clicks, something we should not be doing. This
patch fixes that behavior: we still ignore the finger for movement, but a
physical click now triggers a left click once we've been in the area for the
timeout.
This new behavior doesn't apply within the timeout, i.e. if a finger is in the
right top button area, moves out and immediately clicks, we still trigger a
right click. This avoids erroneous switches to left-clicks when the finger is
at the edge of the button area and moves out during the press.
Related to: https://bugs.freedesktop.org/show_bug.cgi?id=99212
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a touch started hovering in the main area, the button state would start
with AREA and never move to the real button state, despite the finger
triggering the pressure thresholds correctly in one of the areas.
This could even happen across touch sequences if a touch went below pressure
in the software button area, it changed to hovering and the button state
changed to NONE. On the next event, the touch is still hovering and the
current position of the touch is taken for the button state machine.
https://bugs.freedesktop.org/show_bug.cgi?id=99976
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Prefix device log messages with the device's sysname so it's more obvious
where the messages are coming from. This makes it much easier to grep for a
specific device's messages but also adds some identifier to messages that
were previously without any identifier (e.g. all the state machine debugging)
All info and error messages also automatically prefix the device name, so
those messages are standardised too, e.g
an info message now:
event4 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
a debug message now:
event4 - using pressure-based touch detection
And since this required changing a lot of the strings in messages anyway,
polish a few minor things too.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
We don't initialize click methods on devices with physical buttons. This model
is a special case, it's not a clickpad but it only has one button (because one
button is all you ever need and whatnot).
https://bugs.freedesktop.org/show_bug.cgi?id=99283
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
