Instead of having this ifdef'd out split the main and directly
associated functions out into a separate file.
That ifdef used to exist so we can use parts of litest in some other
files (the selftest and the utils test). Those tests care mostly
about the assertion helpers so long-term a split into
assert helpers and "rest of litest" would be better. For now, this will
do.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1174>
A tablet with multiple mode toggle buttons had each mode toggle button
merely cycle to the next mode in the sequence, removing the whole point
of having multiple toggle buttons.
Fix this by defaulting each mode toggle button to "next". Once we
have initialized all buttons we can check if we have multiple buttons -
if so we number them sequentially so that the first button maps to mode
0, the second maps to mode 1, etc.
Closes#1082
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1132>
These have been behind #if 0 for ages but there are more to come, let's
make it possible to toggle those on/off with a meson option.
This is an option that must not be used in a release build, it will leak
key codes to the logs.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1156>
This replaces check. The code is a copy of pwtest which I wrote years
ago for pipewire but adjusted for us here the last few days.
There are a few advantages over check:
- Ability to SKIP tests or mark them as NOT_APPLICABLE, the latter
of which is used for early checks if a device doesn't meet
requirements.
- it captures stdout/stderr separately
- colors!
- YAML output format makes it a lot easier to read the results and
eventually parse them for e.g. "restart failed tests"
Less abstraction: we set up the tests, pass them to the runner and run
them with the given number of forks. This is an improvement over before
where we forked into N test suites which each called check which then
forked again. Since we're now keeping track of those processes
ourselves we can also write tests that are expected to fail with
signals.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1067>
These take a long time and have a reasonable high chance of failure due
to the timing constraints. Let's split them up so they don't hog the
runners for that long and in case they fail, we only need to re-run a
short test.
Before: one test running approx 21 min, now 3 tests running approx 7 +
11 + 4 min.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1065>
Instead of extracting the suite name from the test's file name use the
current suite that is being parsed. This way we pave the way for
multiple suites in the same file.
This uses a global because otherwise we'd have to redo all the
litest_add() functions but it does the job here.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1065>
Some tablets such as those in the XP-PEN PRO series use "dials" which
are actually scrollwheels and emit EV_REL events. These should not be
emulated as rings (which are absolute) so we must expose them as a new
tablet event.
Adds LIBINPUT_EVENT_TABLET_PAD_DIAL that work largely identical as our
high-resolution wheel events (i.e. the values are in multiples or
fractions of of 120). Currently supports two dials.
This is a lot of copy/paste from the ring axes because the interface is
virtually identical. The main difference is that dials give us a v120
value in the same manner as our scroll axes.
Notes:
- REL_DIAL is mutually exclusive with REL_WHEEL, we assume the kernel
doesn't (at this point) give us devices with both. If this changes for
devices with three dials (wheel + hwheel + dial) we need to add code
for that.
- REL_DIAL does not have a high-resolution axis and we assume that any
device with REL_WHEEL_HI_RES will also have REL_HWHEEL_HI_RES (if the
second wheel exists).
- With dials being REL_DIAL or REL_WHEEL there is no possibility of
detecting a finger release (the kernel does not route EV_RELs with a
value of zero). Unless this is implemented via a side-channel - and it
doesn't look like any hardware that supports dials does that - we
cannot forward any information here. So unlike absolute rings we
cannot provide a source information here.
Closes#600
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/967>
Where a more generic match assigns a palm threshold to a device, allow
unsetting this by assigning a threshold of zero.
And remove the bug log for palm size threshold of 0 for the same reason.
We need to set the `native` flag:
meson.build:704: WARNING: add_languages is missing native:,
assuming languages are wanted for both host and build.
As documented [1]:
If set to true, the language will be used to compile for the build
machine, if false, for the host machine.
[1] https://mesonbuild.com/Reference-manual_functions.html#add_languages
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
The meson version was `>= 0.49.0` but features from `0.56.0` were used:
meson.build:485: WARNING: Project targets '>= 0.49.0' but uses
feature introduced in '0.56.0': meson.project_source_root.
Update meson's target version to reflect the features used.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Swap any input for both x/y and default to a calibration matrix that
swaps it back. In theory, that device will then behave as every other
device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some touchpads, notably those on the Dell XPS 15 9500, are prone to registering
touchpad clicks when the case is sufficiently flexed. Ignore these by
disregarding any clicks that are registered without touchpad touch.
Signed-off-by: Rob Glossop <robgssp@gmail.com>
Now that we're Python ConfigParser compatible (again), we can check our
quirks file for things our actual parser doesn't care about, but that we
should honour. Right now that means that bustypes and vid/pid matches are
all spelled consistently.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The custom acceleration profile allow the user to define custom
acceleration functions for each movement type per device, giving
full control over accelerations behavior at different speeds.
This commit introduces 2 movement types which corresponds to the
2 profiles currently in use by libinput.
regular filter is Motion type.
constant filter is Fallback type.
This allows possible expansion of new movement types for the
different devices.
The custom pointer acceleration profile gives the user full control over the
acceleration behavior at different speeds.
The user needs to provide a custom acceleration function f(x) where
the x-axis is the device speed and the y-axis is the pointer speed.
The user should take into account the native device dpi and screen dpi in
order to achieve the desired behavior/feel of the acceleration.
The custom acceleration function is defined using n points which are spaced
uniformly along the x-axis, starting from 0 and continuing in constant steps.
There by the points defining the custom function are:
(0 * step, f[0]), (1 * step, f[1]), ..., ((n-1) * step, f[n-1])
where f is a list of n unitless values defining the acceleration
factor for each velocity.
When a velocity value does not lie exactly on those points, a linear
interpolation of the two closest points will be calculated.
When a velocity value is greater than the max point defined, a linear
extrapolation of the two biggest points will be calculated.
Signed-off-by: Yinon Burgansky <51504-Yinon@users.noreply.gitlab.freedesktop.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Allows e.g. compositors to setup libinput as a subproject. Makes
it easier to ad support for libinput features which haven't been
released yet.
Signed-off-by: Simon Ser <contact@emersion.fr>
Same as libinput list-devices, but lists the available event nodes. This
effectively does the same as libinput record without arguments but it's
more obvious in what it is supposed to do and thus easier to point to.
Also, it uses pyudev instead of libevdev so it does not need to run as
root to discover devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some distributions, like Fedora, compile libinput with the debug-gui
option set to false.
Running "libinput debug-gui" indicates that the program is not
installed; however, the help message suggests that the command is
available.
Hide debug-gui from the help message when it is not included.
Fix https://gitlab.freedesktop.org/libinput/libinput/-/issues/480
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
In commit 6a1bd5b0c9 ("meson.build: check gtk targets before
building") introduced a custom config option to check whether Wayland
is supported by GTK or not.
However, in some cases the config option is not set generating this
warning:
../tools/libinput-debug-gui.c:51:5: warning: "HAVE_GTK_WAYLAND" is
not defined, evaluates to 0 [-Wundef]
51 | #if HAVE_GTK_WAYLAND
| ^~~~~~~~~~~~~~~~
Make sure to always set HAVE_GTK_WAYLAND.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Previously, trackpoints got assigned the normal flat profile which does not
accommodate for the trackpoint magic multiplier *and* had a config range
that was too small if you take the multiplire indo account anyway.
Fix this by adding a trackpoint-specific flat accel that has a wider
configuration range and take sthe magic multiplier into account.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
instead of install_subdir. Fixes muon - a strictly-conforming meson
implementation which doesn't implement deprecated and broken-by-design
functionality.
For more info, see: https://mesonbuild.com/Reference-manual_functions.html#install_subdir
Signed-off-by: illiliti <illiliti@protonmail.com>
