Coverity claims they're used uninitialized which isn't true. The condition
that guards it's use also guards its initialization.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When we're only dealing with BTN_TOUCH we can make the tip event independent
of the axis event. Now that we handle pressure thresholds to trigger tip state
this does not work, we'd have to send an axis event with the new pressure and
then a tip event. Since the pressure triggers the tip event this seems
disconnected.
Make the tip event officially capable of carrying axes. A caller can then
decide how to forward this to the next layer.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
On tablets with ABS_PRESSURE use a pressure value to determine tip state, not
BTN_TOUCH. This enables us (down the road) to have device-specific pressure
thresholds. For now we use a 5% default for all devices.
The threshold is a range, if we go past the upper range we initiate the tip
down, if we go below the lower range we release the tip again.
This affects two current tests:
* Once we have pressure offsets and pressure thresholds, we're biased towards
pressure. So we can only check that distance is zero when there is a pressure
value, not the other way round.
* When the pressure threshold is exceeded on proximity in with a nonzero
distance, we can only warn and handle the pressure as normal. Since this is a
niche case anyway anything fancier is likely unnecessary.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
Preparation work for a pressure threshold where we can't just send a BTN_TOUCH
and expect it to trigger the tip event. So the event sequence now needs to
resemble the right order so the threshold will be triggered.
In some cases requires processing an axis event before the tip event. That
behavior will be changed in a follow-up commit.
It also requires that all tablets set ABS_PRESSURE on proximity in.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
Makes it even longer, but at least it's consistent with button and key state.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
litest_wait_for_event_of_type() skips all other events in the queue before the
one we want. This isn't appropriate in most cases, and unless we're dealing
with timeouts we should assume that a certain sequence triggered a specific
event rather than waiting some time for it to trigger.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For the puck/lens cursor tool we need to artificially reduce proximity
detection. These tools are usually used in a relative mode (i.e. like a mouse)
and thus require lifting and resetting the tool multiple times to move across
the screen. The tablets' distance detection goes too far, requiring the user
to lift the device several cm on every move. This is uncomfortable.
Introduce an artificial distance threshold for the devices with the default
value taken from the X.Org wacom driver. If a tool is in proximity but outside
of this range, fake proximity events accordingly.
If a button was pressed while we were out of range we discard that event and
send it later when we enter proximity again.
This is the simple implementation that only takes one proximity out value (the
one from the wacom driver) and applies it to all. Those devices that support a
button/lens tool and have a different default threshold are well out of date.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[rebased, tests updated for new axis percentage behavior (8d76734f)]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For checking if a tablet tool can be uniquely identified by libinput. In
practice this means checking for a nonzero serial number, but let's not
restrict ourselves to allowing just that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Part of the big revamp to get rid of libinput_tablet_tool_axis and
replace it with a set of axis-specific APIs.
Only the rel wheel has true delta events, everything else is a delta
calculated by libinput based on the previous position. Since we supply that
position to the callers anyway, they can determine that delta themselves
where needed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Part of the big revamp to get rid of libinput_tablet_tool_axis and
replace it with a set of axis-specific APIs.
Note that this commit drops the ability to check whether a tablet has an x or
y axis. If it doesn't, libinput won't initialize the tablet anyway so this was
superfluous already.
Likewise with the tilt axes - either we have x and y tilt or we have neither,
so separate checks for tilt_x and tilt_y is unnecessary.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Second part of the big revamp to get rid of libinput_tablet_tool_axis and
replace it with a set of axis-specific APIs.
Note that this commit drops the ability to get the absolute value from a
relative wheel. The previous API always returned 0 for this case, it is not
needed anymore.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude <cpaul@redhat.com>
First part of the big revamp to get rid of libinput_tablet_tool_axis and
replace it with a set of axis-specific APIs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude <cpaul@redhat.com>
If a tool wears out, it may have a pre-loaded pressure offset. In that case,
even when the tool is not physically in contact with the tablet surface it
will send pressure events.
Use automatic pressure offset detection, similar to what the X.Org wacom
driver does. On proximity-in, check the pressure and if the distance is above
50% of the range and the pressure is nonzero but below 20% of the range, use
that value as pressure offset.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Behavior for axis events in the same event frame as the BTN_TOUCH is to
always send axis events before any tip state.
Behavior for button events in the same event frame as the BTN_TOUCH is to
order button events to happen when the tip is in proximity, i.e. after the tip
event on tip down and before the tip event on tip up.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The tablet tip works like a button in the kernel but is otherwise not really
a button. Split it into an explicit tip up/down event instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
test.h:421:49: warning: ‘last_y’ may be used uninitialized in this function
[-Wmaybe-uninitialized]
Cannot actually happen, if we don't get into the while loop where we
initialize it, we would assert.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Quite similar to wacom tablets but the evdev protocol differs - no serials for
example and only two tools. The device has a wheel, but it's not apparently
part of the stylus like on the wacom tablets. And it has a bunch of keys.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a tool is in proximity when we init, send a proximity event immediately.
This is only partially reliable due to the current kernel behavior:
* if the tool comes into proximity when there is no evdev client, the device
won't send any events and must be lifted out-of-proximity first. Patch is in
the works, see https://patchwork.kernel.org/patch/5924611/
* before 3.19, if the tool was in proximity (with an evdev client attached),
but goes out of proximity and back in with no client connected, we get an
immediate proximity out event from the kernel once we connect to the device
and no further events after that.
See kernel commit b905811a49bcd6e6726ce5bbb591f57aaddfd3be
Otherwise, things work as expected. The above should be fixed in the kernel
anyway.
Note that this changes the order of events during a udev seat init, before we
had all DEVICE_ADDED events in a row, now the proximity event may be
interspersed.
Reported-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
The devices were never added to the libinput context we were checking, and the
while loop would quietly ignore not getting any events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
