./configure --enable-gcov adds the required flags to link everything ready for
gcov. A new make gcov target runs the test suite, then pulls all the gcov bits
together into ./test/gcov-reports/ including a summary file.
The script to pull everything out is used in libevdev too, we just have an
extra condition here to ignore the selftest gcov bits (it overwrites the
useful litest.c coverage output).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Until the kernel patches to handle LED group switching are in place we provide
the external API backed by an implementation that simply exposes one group
with one mode and no toggle buttons. This allows us to ship a libinput release
with the API in place and switch libinput later without having all the stack
above us being delayed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
This is just the required framework, it's not hooked up to anything just yet.
Hooking it up comes as separate commit to better detail why/when a device
supports emulation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Prints the various pointer accel behaviors into a format understood by
gnuplot, which then provides prettiness.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
A tablet hotplug event is rare and not a time-critical event, so we load the
database on tablet init and throw it away again.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
Handle everything which is not handled by the tap, (soft)button or edge-scroll
code/statemachines in a unified way. Everything is treated as a X-finger
gesture now, and the action to take on finger movement is decided by
the gesture.finger_count setting. Pointer control now simply is seen as a
1 finger gesture, and 2fg scrolling as a 2fg gesture.
This removed the need for special-casing things like switching back to
pointer mode when lifting a finger in 2fg scrolling mode, and also lays the
groundwork for adding 3+ fg gesture support.
Note that 1 test-case needs to be updated to wait for the finger mode
switching when switching mode while a gesture has already been started.
This is actually an improvement as this stops sending spurious pointer
motion events at the end of 2fg scrolling when not lifting both fingers at
exactly the same time.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Manual changes:
* add tablet APIs to libinput.sym
* add the tablet-specific events to litest_event_type_str
* add NULL for device_remove in the tablet interface
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This isn't the final 0.8.0 API yet, but we might as well get started.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Fixes distcheck (automake 1.14.1)
make[2]: Entering directory '....../libinput-0.7.0/_build/test'
Makefile:926: ../src/.deps/libinput-util.Plo: No such file or directory
make[2]: *** No rule to make target '../src/.deps/libinput-util.Plo'. Stop.
make[2]: Leaving directory '....../libinput/libinput-0.7.0/_build/test'
Makefile:412: recipe for target 'distclean-recursive' failed
That was the only place we used subdir objects, so we can drop it from
configure now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Add edge-scrolling support for non multi-touch touchpads as well as for
users who prefer edge-scrolling (as long as they don't have a clickpad).
Note the percentage to use of the width / height as scroll-edge differs from
one manufacturer to the next, the various per model percentages were taken
from xf86-input-synaptics.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=85635
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
To keep the implementation of a filter separate from the users of a filter.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
sendevents config tests currently disabled for LITEST_TABLET until that gains
the matching bits in the dispatch.
Conflicts:
src/evdev.c
src/libinput.c
test/litest.c
test/litest.h
Our static library leaks symbols like crazy, some of which are likely
conflicts with users of this library (log_msg, open_restricted, ...).
Disale static linking by default so we don't have to spend time debugging
this.
Related to:
https://bugs.freedesktop.org/show_bug.cgi?id=82292https://bugs.freedesktop.org/show_bug.cgi?id=82785
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
These devices set the LIBINPUT_DEVICE_CAP_TABLET flag, and emit a lot more axis
information then mice and touchpads. As such, tablet events are in a whole new
group of events that is separate from everything else.
In this commit, only X and Y axes are reported in libinput.
Based off the patch originally written by Carlos Garnacho
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Currently we are using DIY timers in the touchpad softbutton and tap handling
code, and at least the softbutton code gets its wrong. It uses one timer-fd
per touchpad to set a timeout per touch, which means that if a timeout is
set for 100ms from now for touch 1, and then 50 ms later touch 2 sets a timeout
for 200 ms from now, then the timeout for touch 1 will come 150 ms too late.
This commits adds a proper timer subsystem so that we've one place to deal
with timer handling, and so that we can only get it wrong (well hopefully
we get it right) in one place.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Avoids having to #define any values we're trying to use.
Header file is from Linux 3.15-rc8.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
With the addition of software buttons for clickpads, the new touchpad code has
overtaken this driver in terms of features. The older driver was disabled in
6a61032625.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This is about to become more complicated with the support for software button
areas. Move it to a separate file to have it logically grouped together.
No functional changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The tapping state implementation will be in a separate file, so let's make
sure we can access the structs we need.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Doesn't do anything but initialize and destroy. This is not a permanent
separate implementation, it's just easier to start this way and then switch
over than to add to the current one.
Temporary measure: LIBINPUT_NEW_TOUCHPAD_DRIVER environment variable can be
used to enable the new driver
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
libevdev wraps the various peculiarities of the evdev kernel API into a
type-safe API. It also buffers the device so checking for specific features at
a later time is easier than re-issuing the ioctls. Plus, it gives us almost
free support for SYN_DROPPED events (in the following patch).
This patch switches all the bit checks over to libevdev and leaves the event
processing as-is. Makes it easier to review.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Hooking libinput up to udev isn't always possible, especially if libinput were
to be used in the X server which already has the udev handling built-in.
Add an option to create a context from a path.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch ports udev-seat from weston to libinput, including adapting
libinput internals and API to provide seat and device discovery.
The public API is extended with device discovery, object reference, a
seat object. As libinput takes care of creating and destroying its
objects user data getter/setter is added in order to make it possible
for the client to directly associate an object application side with an
object library side.
Device discovery API is made up of the 'seat added', 'seat removed',
'device added' and 'device removed' events. The seat added/removed
events contains a pointer to a libinput_seat struct, while the device
added/removed events contains a pointer to a libinput_device event.
The objects are reference counted with libinput holding one reference by
default. The application can increase the reference count with
libinput_seat_ref() and libinput_device_ref() and decrease the reference
count with libinput_seat_unref() and libinput_device_unref().
The basic event struct is changed to have a 'target' union parameter
that can be either a libinput, libinput_seat or libinput_device struct
pointer.
There is one known problem with the current API that is the potentially
racy initialization.
The problem is when a device is both discovered and lost during initial
dispatchig, causing libinput to first queue a 'added' message, creating
the device with default reference count 1, then before going back to the
application queuing a 'removed' message, while at same time decreasing
reference count of the device to 0, causing it o be destroyed. The queue
will at this state contain two messages with pointers to free:ed memory.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Instead of having the user manage added and removed fd's as well as the
fd used for creating evdev devices, introduce a libinput object that
itself has an epoll fd.
The user no longer manages multiple fd's per libinput instance, but
instead handles one fd, dispatches libinput when data is available, then
reading events using libinput_get_event().
libinput_event's are now per libinstance, but divided into categories.
So far the only category is device events. Device events are categorized
by the presence of a non-NULL device pointer in the event.
The current API usage should look like:
struct libinput libinput = ...;
struct libinput_event *event;
if (libinput_dispatch(libinput) != 0)
return -1;
while ((event = libinput_get_event(libinput))) {
if (event->device)
process_device_event(event);
free(event);
}
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
This commit introduces build script configuration for building a shared
library 'libinput.so' containing the evdev input device functionality
from weston.
evdev.c, evdev.h and evdev-touchpad.c are ported to not use the data
structures and API in weston and libwayland-server in order to minimize
dependencies.
The API of filter.c and filter.h are renamed to not include the
'weston_' prefix.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
