check 0.11 has those macros, but they don't work the same way as our homemade
ones. So for now just #undef them
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This makes the tapping times shorter and hopefully more obvious. It also fixes
a bug where repeated tripletap (by tapping with one finger while leaving the
other two down) could cause incorrect timestamps.
https://bugs.freedesktop.org/show_bug.cgi?id=100796
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For multitap, we're one tap behind with the button clicks, i.e. we send the
first full click button on the second tap, etc. Remember the timestamps of the
touches so we can send the events with the right timestamps. This makes
tapping more accurate because the time between taps and various timeouts
matter less for double-click detection.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Without this enabled, we stay in the single/double tap part of the state
machine and a triple tap is just a double tap followed by a single tap.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Try to guess the default scroll buttons a bit better. Right now we default to
scroll button 0 (disabled) whenever a device doesn't have a middle button but
we might as well cast a wider net here as setting a scroll button only has a
direct effect when button scrolling is enabled.
Use the first extra button we find or fall back onto the right button if we
don't have any extra buttons.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
As of systemd commit f013e99e160f385a0c02793c612ef4c8a8ffc4d7, ID_BUS is now
set for all bluetooth devices, not just those with subsystem bluetooth. This
affects the Apple Magic Mouse and sets the systemd hwdb's MOUSE_DPI value.
That value is different to the test results we currently have, causing some
tests to fail because different deltas are generated (e.g.
pointer_scroll_button).
Our udev rules are prefixed 99 and thus apply after the various system rules.
So we can't easily set ID_BUS in our rule because it'll apply after
70-mouse.rules checks for the bustype. So we'd have to detect systemd version
or so, but the easy way is to simply force MOUSE_DPI to the empty value. For
our test cases it doesn't matter if the DPI is set correctly anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a single log message is composed of multiple calls (as are all from
evdev_log_*), don't prefix multiple times.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Taking the tablet events as-is produces the occasional wobble in what should
be a straight line. Bug 99961 has a jpg attachment to illustrate that.
Emulate the wacom driver behavior and average x/y across the last 4 values to
smoothen out these dents.
https://bugs.freedesktop.org/show_bug.cgi?id=99961
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <pingc@wacom.com>
No effect since we don't care about the mouse itself. But when running
on kernels without uinput's UI_GET_SYSNAME this can cause misdetection of
the uinput device and test case failures. Simply picking a differently named
device avoids that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a touch started hovering in the main area, the button state would start
with AREA and never move to the real button state, despite the finger
triggering the pressure thresholds correctly in one of the areas.
This could even happen across touch sequences if a touch went below pressure
in the software button area, it changed to hovering and the button state
changed to NONE. On the next event, the touch is still hovering and the
current position of the touch is taken for the button state machine.
https://bugs.freedesktop.org/show_bug.cgi?id=99976
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Introduced in commit 8e7f99c27a we only allowed horizontal edge scrolling
on devices larger than 50mm to leave enough reactive space on the touchpad.
Looking at a ruler, a 50mm high touchpad is still large enough to leave the
bottom 7mm as an horizontal edge scroll area. Reduce the minimum size to 40mm
instead, that's closer to where it starts to get a bit iffy.
https://bugzilla.redhat.com/show_bug.cgi?id=1422221
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This may be a feature for the future but for now be honest and don't claim
that button-based scrolling is available, it's not hooked up in the absolute
code path.
https://bugs.freedesktop.org/show_bug.cgi?id=99865
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Before, our states were idle, button down and scrolling. This adds a state
where the button is down and the timeout has expired (i.e. we're ready to send
scroll events) but we haven't actually sent any events anymore.
If the button is released in this state, we generate a normal click event.
https://bugs.freedesktop.org/show_bug.cgi?id=99666
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Device needs BTN_MIDDLE disabled, this way middle button emulation is present
by default.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The button-scroll by default behavior is only true on devices with a middle
button.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
And disable middle button emulation for this test, it would mess with the test
results.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This failed on devices without a middle button, we just didn't have a test
device to trigger this.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We don't have the same libevdev context that libinput has so if libinput
disables/enables event codes we don't see that and may get unexpected
behavior in the test.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Specify the layout of the combo so we know when to initialize palm detection.
This allows us to drop palm detection on external touchpads otherwise,
replacing the wacom-specific check with something more generic..
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Simplest implementation for what we need right now, it turns off an event on
the evdev device and turns it back on again. This allows us to change bits in
the 'normal' event stream, such as changing the tool type without triggering
proximity events for the BTN_TOOL_PEN that all test devices send by default.
This won't work for absolute devices because we need to re-enable with a
struct input_absinfo. But we don't need that ability for now anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We don't initialize click methods on devices with physical buttons. This model
is a special case, it's not a clickpad but it only has one button (because one
button is all you ever need and whatnot).
https://bugs.freedesktop.org/show_bug.cgi?id=99283
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Usually we reply INVALID before we reply UNSUPPORTED but that's only for those
values where the value is a programming error. But in this case it's a bit
more complicated. INVALID is only for the cases where the button doesn't exist
on the device, if we don't have button scrolling at all then we have
UNSUPPORTED for all.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Not much we can do here, our virtual devices don't have the sysfs files
required, so they have 0 modes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
