This makes it possible for callers to detect whether a touch device is
single or multitouch (or even check for things like dual-touch vs real
multi-touch) and adjust the interface accordingly.
Note that this is for touch devices only, not touchpads that are just pointer
devices.
https://bugs.freedesktop.org/show_bug.cgi?id=104867
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This adds a third profile to the available profiles to map device-specific
speed to an acceleration factor, fully defined by the caller.
There has been a consistent call for different acceleration profiles in
libinput, but very little specifics in what actually needs to be changed.
"faster horses" and whatnot (some notable exceptions in e.g. bug 101139).
Attempts to change the actual acceleration function will likely break things
for others.
This approach opens up the profile itself to a user-specific acceleration
curve. A caller can set an acceleration curve by defining a number of points
on that curve to map input speed to an output factor. That factor is applied
to the input delta.
libinput does relatively little besides mapping the deltas to the
device-specific speed, querying the curve for that speed and applying that
factor. The curve is device-specific, the input speed is in device units/ms.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no guarantee that libinput does the right thing if memory allocation
fails and it's such a niche case on the systems we're targeting that it just
doesn't matter. Simply abort if zalloc ever fails.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Because otherwise things go boom, but unless you passed -fshort-enums this
shouldn't happen anyway. And gcc's documentation says don't do that. So don't
do that, or we'll scream at you.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Tested-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
../src/libinput.c:56:17: warning: passing an object that undergoes default
argument promotion to 'va_start' has undefined behavior [-Wvarargs]
The enum's size is compiler-defined, so the enum gets promoted to whatever the
compiler chose. That promotion is undefined, so let's use an int here.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Tested-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
This is for debugging purposes only, we cannot guarantee that event timestamps
always go up - at least not across devices. Example: tapping on a touchpad may
delay an event until a timeout expires, but that event is then sent with the
original touch timestamps (i.e. in the past). If any other device produces
events during that timeout period, our timestamps are out-of-order.
This isn't really a bug because we are forced to do that, but for bug-fixing
it can be useful to detect.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Usually we reply INVALID before we reply UNSUPPORTED but that's only for those
values where the value is a programming error. But in this case it's a bit
more complicated. INVALID is only for the cases where the button doesn't exist
on the device, if we don't have button scrolling at all then we have
UNSUPPORTED for all.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Not needed right now as everything assumes the listener was added before it
was removed. This helper is for the cases where we may call listener_remove
before it was ever added.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This will allow switch devices known to libinput to be exposed. Currently,
this is SW_LID.
libinput also handles switch events internally, e.g. a laptop touchpad will
be disabled autmoatically when the lid is closed. This is transparent to
the caller, although the caller will also receive the event. See
https://bugs.freedesktop.org/show_bug.cgi?id=86223
This features is intended to be the main driver for the interface.
Co-Authored-By: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: James Ye <jye836@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fixes the respective clang warnings
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
The previously hardcoded button map for tapping is 1/2/3 to LRM. But the
middle button is a common feature on the desktop (used for paste, most
prominently) and three-finger tapping is almost impossible to do reliably on
some touchpads (e.g. the T440 has a recognition rate of ~1 in 5).
Left and right buttons have a prominent physical position (either softbuttons
or physical buttons) so make the tap order configurable. Those that require
middle buttons reliably can use the [software] buttons for left/right and
2-finger tap for a middle button.
https://bugs.freedesktop.org/show_bug.cgi?id=96962
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Until the kernel patches to handle LED group switching are in place we provide
the external API backed by an implementation that simply exposes one group
with one mode and no toggle buttons. This allows us to ship a libinput release
with the API in place and switch libinput later without having all the stack
above us being delayed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Move mode control to libinput. This reduces some flexibility on what we can do
with modes but makes it a lot easier for anyone to implement modes correctly
and have the LEDs apply appropriately, etc. Let's go with the option to make
the 95% use-case easy. Note: whether the mode is actually used is up to the
caller, e.g. under Windows and OS X the mode only applies to the
rings/strips, not the buttons.
A tablet pad has 1 or more mode groups, all buttons/ring/strips are assigned
to a mode group. That group has a numeric mode index and is hooked to the
LEDs. libinput will switch the LEDs accordingly.
The mode group is a separate object. This allows for better APIs when it comes
to:
* checking whether a button/ring/strip is part of a mode group
* checking whether a button will trigger a mode transition
and in the future potentially:
* checking which mode transition will happen
* setting which button should change the mode transition
* changing what type of mode transition should happen.
* moving a button from one mode group to the other
This patch adds the basic scaffolding, without any real implementation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Proofread-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
This is only set on button events so use the same approach as for rings and
strips. No functional changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Make sure that the tool is valid while the event is valid, even if the device
gets destroyed before the event is destroyed.
This cannot actually be triggered right now, the event has a ref to the device
and the tools do not get removed until the device is destroyed. But for future
implementations (e.g. where the tool is otherwise automatically destroyed on
proximity out) we need to ensure the tool remains valid for the event
lifetime.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Trackballs are effectively stationary devices and can be positioned at any
rotation. They are also employed by users with impaired dexterity which
sometimes implies that they are positioned at an non-default angle to make the
buttons easier to reach.
Add a config option for rotation for trackball devices. Currently only
supported for 90-degree angles, if there is a need we can add more angles
later.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
This interface handles the buttons on the physical tablet itself, including
the touch ring and the strip.
A notable difference to other libinput interfaces here is that we do not use
linux/input.h event codes for buttons. Instead, the buttons are merely
numbered sequentially, starting at button 1. This means:
* the API is different, instead of get_button() we have get_button_number() to
drive the point home
* there is no seat button count. pads are inherently different devices and
compositors should treat them as such. The seat button count makes sense
when you want to know how many devices have BTN_LEFT down, but it makes no
sense for buttons where all the semantics are handled by the compositor
anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
We just returned the current profile instead of the default one. Fix
that.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Had this in a private bug report recently. Missing hooks for open/close just
segfault with little information to debug. Add an assert, this is definitely a
bug in the caller and we don't need to recover from that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There are a number of use-cases where tapping may be desirable, but
tap-and-drag is not, e.g. where tapping is used to select multiple items in a
list. Having tap-and-drag on hinders this, and the nature of the interaction
means it cannot be detected based on timeouts, movement thresholds, etc.
Provide an option instead to turn tap-an-drag off. Tap-and-drag remains
enabled by default (though tapping is disabled by default).
For the touchpad tap state diagram, the new option disables the transition
from state TOUCH to state TAPPED and releases the button immediately instead.
This means that multitap-and-drag is disabled too since we now just loop
around in the single-tap state for multitap.
It also makes tapping more responsive - we don't have to wait for the timeout
before we know whether it's a tap event. The first touch time is noted, we now
send the button press with the time of the first touch and the release with
the time of the release. This ensures a realistic time diff between the two
events.
https://bugs.freedesktop.org/show_bug.cgi?id=93502
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.netto>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Instead of an explicit tablet mode that device must be changed into, let the
caller decide which coordinates are preferred. The tablet mode may be
application-specific and usually depends on the tool as well.
This patch adds an interface to get a motion delta for the x/y axes in
pixel-like coordinates. libinput provides some magic to convert the tablet
data into something that resembles pixels from a mouse motion.
For unaccelerated relative motion, the caller should use the mm values from
the tablet and calculate deltas manually.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
Makes the code less generic, but more expressive. No visible functional
changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
There's no reason to prevent this for button events. Unlike the pointer
which is a relative device a tablet is (usually) a device with a lot of state.
Caller code that handles axes is likely shared between the various events,
treating button events separately here doesn't get us any benefit.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
When we're only dealing with BTN_TOUCH we can make the tip event independent
of the axis event. Now that we handle pressure thresholds to trigger tip state
this does not work, we'd have to send an axis event with the new pressure and
then a tip event. Since the pressure triggers the tip event this seems
disconnected.
Make the tip event officially capable of carrying axes. A caller can then
decide how to forward this to the next layer.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
Makes it even longer, but at least it's consistent with button and key state.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Print the type of event when it is queued up internally. This makes it a lot
easier to associate evdev events with the libinput event queued up and does
not depend on the caller calling libinput_dispatch().
Since this should only be used during development, hide it behind an if 0.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For checking if a tablet tool can be uniquely identified by libinput. In
practice this means checking for a nonzero serial number, but let's not
restrict ourselves to allowing just that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Now that we don't provide an API anymore to access the absolute value of the
wheel and the axes are handled separately, we can safely store the wheel delta
in the normal axis array.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The wheel is the only one axis that has actual deltas, all others have
straightforward deltas that we don't need to care about, the caller can
calculate those where needed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Only the wheel has a discrete value, no need to keep arrays for a single
value.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Part of the big revamp to get rid of libinput_tablet_tool_axis and
replace it with a set of axis-specific APIs.
Only the rel wheel has true delta events, everything else is a delta
calculated by libinput based on the previous position. Since we supply that
position to the callers anyway, they can determine that delta themselves
where needed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Part of the big revamp to get rid of libinput_tablet_tool_axis and
replace it with a set of axis-specific APIs.
Note that this commit drops the ability to check whether a tablet has an x or
y axis. If it doesn't, libinput won't initialize the tablet anyway so this was
superfluous already.
Likewise with the tilt axes - either we have x and y tilt or we have neither,
so separate checks for tilt_x and tilt_y is unnecessary.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Second part of the big revamp to get rid of libinput_tablet_tool_axis and
replace it with a set of axis-specific APIs.
Note that this commit drops the ability to get the absolute value from a
relative wheel. The previous API always returned 0 for this case, it is not
needed anymore.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude <cpaul@redhat.com>
First part of the big revamp to get rid of libinput_tablet_tool_axis and
replace it with a set of axis-specific APIs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude <cpaul@redhat.com>
