Had this in a private bug report recently. Missing hooks for open/close just
segfault with little information to debug. Add an assert, this is definitely a
bug in the caller and we don't need to recover from that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If the fingers are vertically apart by more than 20mm we used to assume a
pinch gesture immediately. This is too close together for some users during
two-finger scrolling. Since we should always bias towards scrolling, only
trigger this detection for three fingers, the rest has to go through the
movement detection.
The reason for the pinch detection here was to differentiate from 3fg swipe
gestures (83f3dbd1), hence we're still in spirit of that patch.
https://bugs.freedesktop.org/show_bug.cgi?id=94264
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
A nonzero resolution on the tilt axes is units/rad so we can calculate the
physical min/max based. Uneven min/max ranges are supported.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
We previously used the half-way mark of the touchpad's y axis to decide where
to ignore tapping. Move this down to the top edge of the software buttons
instead. Users may tap with a finger in the software button areas, on the rest
of the touchpad it's unlikely that they tap within 5% of the edge.
On touchpads with physical buttons or if clickfinger is enabled, the
no-tapping zone extends to the bottom of the touchpad. This required splitting
the tests into clickfinger, softbuttons and hardbuttons.
https://bugs.freedesktop.org/show_bug.cgi?id=93947
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The newer Cintiqs have a minimum value of 400/400 advertised by the kernel but
the actual sensor goes past the 0/0 origin. Test this, make sure that a value
outside the boundaries generates negative mm values.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If the tablet is already in proximity on startup, we used to immediately sent
a proximity event. We can't fetch MSC_SERIAL from the kernel, so that tool
always had a serial of 0, followed by events with the real serial. Since
clients are supposed to use the serial for the tracking of tools, this is
suboptimal.
When the tablet is added, merely set the internal proximity flags. This way we
wait until the first real event from the device (which includes the serial
number) and convert that into a proximity event.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The Wacom tilt range is 64 degrees so we map everything into that until we
know otherwise.
This commit also switches the tilt axes around to align the angles with the
x/y orientation, i.e. tilting the top of the stylus towards the positive x
axis now generates a positive x tilt.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
If dwt is disabled on the commandline, e.g. by setting an xinput property it
may be disabled before the release event comes in. This caused the timer to
refresh indefinitely since the key state mask was still on for that key.
Always updating the key state mask (even when dwt is disabled) fixes that.
If a key is held down while dwt is disabled, this can still cause a indefinite
timer refresh, so in the timer func, check if dwt is enabled before refreshing
the timer.
https://bugs.freedesktop.org/show_bug.cgi?id=94015
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
If a USB keyboard like the YubiKey is found before the internal keyboard, it
will be paired with the touchpad when it is seen. The internal keyboard is
seen later bug ignored because we already have a keyboard paired with the
touchpad.
This is obviously wrong. For now, give priority to serio keyboards, and
override existing dwt pairings with the new keyboard.
https://bugs.freedesktop.org/show_bug.cgi?id=93983
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
If a key enables dwt and is held down when the timeout expires, re-issue the
timeout.
There is a corner case where dwt may not work as expected:
1. key down and held down
2. dwt timer expires, dwt is re-issued
3. touch starts
4. key is released
5. dwt timer expires
6. touch now starts moving the pointer
This is an effect of the smart touch detection. A touch starting after the
last key press is released for pointer motion once dwt turns off again. This
is what happens in the above case, the dwt timer expiring is the last virtual
key press. This is a corner case and likely hard to trigger by a real user.
https://bugs.freedesktop.org/show_bug.cgi?id=93984
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Some older touchpad devices jitter a fair bit when a finger is resting on the
touchpad. That's why the hysteresis was introduced in the synaptics driver
back in 2011. However, the default value of the hysteresis in the synaptics
driver ended up being 0, even though the code looks like it's using a fraction
of the touchpad diagonal. When the hysteresis code was ported to libinput it
was eventually set to 0.5mm.
Turns out this is still too high and tiny finger motions are either
nonreactive or quite jumpy, making it hard to select small targets. Drop the
default hysteresis by reducing its margin to 0, but leave it in place for
those devices where we need them (e.g. the cyapa touchpads).
https://bugs.freedesktop.org/show_bug.cgi?id=93503
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This button sends a release N, press N+1 on each press, cycling through the
three event codes supported. This causes a stuck button since the current mode
is never released.
Long-term this better served by a set of switches that toggle accordingly, for
now disable the button codes.
https://bugs.freedesktop.org/show_bug.cgi?id=92127
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
There are a number of use-cases where tapping may be desirable, but
tap-and-drag is not, e.g. where tapping is used to select multiple items in a
list. Having tap-and-drag on hinders this, and the nature of the interaction
means it cannot be detected based on timeouts, movement thresholds, etc.
Provide an option instead to turn tap-an-drag off. Tap-and-drag remains
enabled by default (though tapping is disabled by default).
For the touchpad tap state diagram, the new option disables the transition
from state TOUCH to state TAPPED and releases the button immediately instead.
This means that multitap-and-drag is disabled too since we now just loop
around in the single-tap state for multitap.
It also makes tapping more responsive - we don't have to wait for the timeout
before we know whether it's a tap event. The first touch time is noted, we now
send the button press with the time of the first touch and the release with
the time of the release. This ensures a realistic time diff between the two
events.
https://bugs.freedesktop.org/show_bug.cgi?id=93502
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.netto>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
When two fingers move slowly, an event frame may only have one finger motion,
followed by a frame with the other finger's motion. If we only divide by the
number of dirty touches, the speed of the gesture increases whenever that
happens.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The first/second variables are only needed for pinch, so we can skip them
here.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Instead of an explicit tablet mode that device must be changed into, let the
caller decide which coordinates are preferred. The tablet mode may be
application-specific and usually depends on the tool as well.
This patch adds an interface to get a motion delta for the x/y axes in
pixel-like coordinates. libinput provides some magic to convert the tablet
data into something that resembles pixels from a mouse motion.
For unaccelerated relative motion, the caller should use the mm values from
the tablet and calculate deltas manually.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
No point trying to detect pinch gestures if we only have one set of
coordinates. This makes two-finger scrolling on ST touchpads more reactive.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Synaptics, Elantech and Alps semi-mt devices all have issues with reporting
correct MT data, even the bounding box which semi-mt devices are supposed to
report is wrong.
Synaptics devices have massive jumps with two fingers down. Elantech devices
may open slots without coordinate data. Alps devices may send 0/0 coordinates
as initial slot position.
All these may be addressable with specific quirks, but the actual benefit is
largely restricted to better palm detection (though even with quirks this is
unlikely to work) and support for pinch gestures (again, lack of coordinates
makes supporting those hard anyway).
Elantech: https://bugs.freedesktop.org/show_bug.cgi?id=93583
Alps: https://bugzilla.redhat.com/show_bug.cgi?id=1295073
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
If the touch hasn't updated, the distance hasn't changed so there is no need
to unhover.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Pure movement detection is quite unreliable when trying 3-finger pinch
gestures, and many gestures are misdetected as swipes. Before looking at the
motion, look at the constellation of the fingers. If one finger is 20mm below
the other one, assume they're in a pinch position.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Setting TRIPLETAP unsets DOUBLETAP, etc. This doesn't usually happen with
kernel devices, but every once in a while I get this wrong in a test and spend
hours debugging the code...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
