If some elantech touchpads require a hysteresis, let's use some more generic
tag for those touchpads that require correct handling of pointer wobbles.
https://bugs.freedesktop.org/show_bug.cgi?id=94897
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Rather than checking the physical key's state, set a flag for the button to be
down. This enables us to use non-physical buttons (middle button emulation).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The touchpad's sensors are too far apart (or the firmware interferes), causing
in a jerky movement visible especially on slow motion. We get a bunch of
normal motion events, then only ABS_MT_PRESSURE updates without x/y updates.
After about one mm of movement x/y updates resume, with the first event
covering the distance between the last motion event. That event is usually
accelerated and thus causes a large jump. Subsequent events are sufficiently
fine-grained again.
This patch counts the number of non-motion events. Once we hit 10 in a row, we
mark the first motion update as non-dirty, effectively discarding the motion
and thus stopping the pointer jumps.
https://bugs.freedesktop.org/show_bug.cgi?id=94379
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Some older touchpad devices jitter a fair bit when a finger is resting on the
touchpad. That's why the hysteresis was introduced in the synaptics driver
back in 2011. However, the default value of the hysteresis in the synaptics
driver ended up being 0, even though the code looks like it's using a fraction
of the touchpad diagonal. When the hysteresis code was ported to libinput it
was eventually set to 0.5mm.
Turns out this is still too high and tiny finger motions are either
nonreactive or quite jumpy, making it hard to select small targets. Drop the
default hysteresis by reducing its margin to 0, but leave it in place for
those devices where we need them (e.g. the cyapa touchpads).
https://bugs.freedesktop.org/show_bug.cgi?id=93503
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This button sends a release N, press N+1 on each press, cycling through the
three event codes supported. This causes a stuck button since the current mode
is never released.
Long-term this better served by a set of switches that toggle accordingly, for
now disable the button codes.
https://bugs.freedesktop.org/show_bug.cgi?id=92127
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Label internal keyboards through the udev hwdb and only pair the internal
(usb) Apple touchpads with those keyboards labelled as such.
https://bugs.freedesktop.org/show_bug.cgi?id=93367
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
If an x220 is updated to the touchpad firmware version 8.1, the touchpad
suffers from the same issues as the x230 and needs custom acceleration code.
Unfortunately we cannot detect this otherwise, so it is left to the user as a
custom hwdb setting.
https://bugzilla.redhat.com/show_bug.cgi?id=1264453
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
A device with REL_X/Y and keys gets marked only as ID_INPUT_KEY, initializes
as keyboard and then segfaults when we send x/y coordinates - pointer
acceleration never initializes.
Ignore the events and log a bug instead. This intentionally only papers over
the underlying issue, let's wait for a real device to trigger this and then
look at the correct solution.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Instead of going straight to pointer_notify_axis, go through
evdev_notify_axis() which flips the scroll direction around for us.
https://bugs.freedesktop.org/show_bug.cgi?id=91597
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The previous approach to pointer acceleration was to initialize the same
motion filter behavior but a different acceleration profile depending on the
hardware (the profile converts a speed to a multiplier for input deltas).
To be more flexible for hardware-specifics, change this into a set of specific
pointer acceleration init functions. This patch has no effective functional
changes, they're still all the same.
The acceleration functions are kept for direct access by the ptraccel-debug
tool.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
The previous code used a 5mm threshold before axis events were posted. This
threshold was on top of the 2mm 2fg threshold (and timeout handling) in the
gesture code and effectively prevented events from being sent after a timeout,
or in the 2mm-5mm range.
We still want a directional lock though, so split the two out. The default 5mm
threshold is set to 0 for touchpads since we have our own handling of the
threshold there. The directional lock only applies once scrollin has started
and remains on 5mm.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Unlike ALPS and Synaptics semi-mt touchpads, the Elantech touchpads appear to
be precise enough to allow a smaller motion threshold before we decide on the
type of gesture (pinch vs scroll).
https://bugs.freedesktop.org/show_bug.cgi?id=91475
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
In most places we use 64 bit unsigned integers; lets be consistent and
use it everywhere.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
These touchpads have a terrible resolution when two fingers are down, causing
scrolling to jump around a lot. That then turns into bug reports that we can't
do much about, the data is simply garbage.
https://bugs.freedesktop.org/show_bug.cgi?id=91135
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This was a stopgap measure to support the Lenovo Carbon X1 3rd and the Lenovo
*50 series. These devices have the trackpoint buttons wired to the touchpad
and thus trackpoint events came from the touchpad device.
This was fixed in the kernel commit cdd9dc195916ef5644cfac079094c3c1d1616e4c,
the systemd hwdb to set this property was removed in 05304592457e01 so nothing
sets this property anymore. Drop it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Hallelujah-expressed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
On some devices we need to set more than one flag, i.e. make it into actual
flags.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Hallelujah-expressed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
For touchscreens we always send raw touch events to the compositor, and the
compositor or application toolkits do gesture recognition. This makes sense
because on a touchscreen which window / widget the touches are over is
important context to know to interpret gestures.
On touchpads however we never send raw events since a touchpad is an absolute
device which primary function is to send pointer motion delta-s, so we always
need to do processing (and a lot of it) on the raw events.
Moreover there is nothing underneath the finger which influences how to
interpret gestures, and there is a lot of touchpad and libinput configuration
specific context necessary for gesture recognition. E.g. is this a clickpad,
and if so are softbuttons or clickfinger used? What is the size of the
softbuttons? Is this a true multi-touch touchpad or a semi multi-touch touchpad
which only gives us a bounding box enclosing the fingers? Etc.
So for touchpads it is better to do gesture processing in libinput, this commit
adds an initial implementation of a Gesture event API which only supports swipe
gestures, other gestures will be added later following the same model wrt,
having clear start and stop events and the number of fingers involved being
fixed once a gesture sequence starts.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
Currently unused, but store the ratio of DPI:default DPI for later use.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We use width/height often enough that storing it once is better than
calculating it on each event.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Alps devices don't know if there is a physical middle button on the touchpad,
so they always report one.
Since a large number of touchpads only have two buttons, enable middle button
emulation by default. Those that really don't want it can play with
configuration options, everyone else has it working by default.
The hwdb entry uses "*Alps ..*" as name to also trigger the "litest Alps..."
devices.
https://bugzilla.redhat.com/show_bug.cgi?id=1227992
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
To quote Bryce Harrington from [1]:
"MIT has released software under several slightly different licenses,
including the old 'X11 License' or 'MIT License'. Some code under this
license was in fact included in X.org's Xserver in the past. However,
X.org now prefers the MIT Expat License as the standard (which,
confusingly, is also referred to as the 'MIT License'). See
http://cgit.freedesktop.org/xorg/xserver/tree/COPYING
When Wayland started, it was Kristian Høgsberg's intent to license it
compatibly with X.org. "I wanted Wayland to be usable (license-wise)
whereever X was usable." But, the text of the older X11 License was
taken for Wayland, rather than X11's current standard. This patch
corrects this by swapping in the intended text."
libinput is a fork of weston and thus inherited the original license intent
and the license boilerplate itself.
See this thread on wayland-devel here for a discussion:
http://lists.freedesktop.org/archives/wayland-devel/2015-May/022301.html
[1] http://lists.freedesktop.org/archives/wayland-devel/2015-June/022552.html
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Jonas Ådahl <jadahl@gmail.com>
Tagging a device should occur only once during configure. We do not
have devices that can be changed after they are configured, so there is no
point in having the tagging part in a deferred struct.
Plus, the note saying that we tag with only one of EVDEV_TAG was wrong.
Now that we are chosing when we call each evdev_tag_*, we can also get
rid of the device->seat_caps tests.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When we get the release event within the timeout, we send a press + release
event for the middle button. Rather than using the release event's timestamp
for both, remember and use the button press timestamp.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The keyboard test is a simple one, if we have the first row of alphabetic
keys, we assume it's a full keyboard.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
The touchpad carries enough state around that calling release_all_keys() isn't
enough to properly suspend it. e.g. a button down after tapping won't be
released by trying to release the physical button for it.
We need to clear the state properly, but that's interface-specific so add a
new hook for it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
