Everywhere else in the touchpad code we use "t" for the struct tp_touch.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Now that we've separate handling of the EDGE_NEW vs EDGE states in
tp_edge_scroll_post_events() we can drop the threshold variable, in EDGE_NEW
we always want to check against DEFAULT_SCROLL_THRESHOLD and in the EDGE
state we only want to make sure that the delta != 0.0 which is already
checked later on in tp_edge_scroll_post_events().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The previous setting of 10 wasn't 10 mm, it was used against the deltas
normalized to a 1000DPI mouse, i.e. closer to 4mm. It was also also per-event,
so a slow movement or a high-frequency touchpad can struggle to meet the
threshold.
Change the trigger to be ~5 mm from the initial touch down, accumulated until
we either meet the threshold or the timeout expires. The first scroll event
includes the delta since the touch down rather than the most recent delta.
This removes the delay otherwise seen in scrolling and makes the scroll motion
match the finger motion. This accumulated delta only applies when exceeding
the motion threshold, when the timeout triggers the switch to scrolling the
first delta posted is the current delta.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Handle everything which is not handled by the tap, (soft)button or edge-scroll
code/statemachines in a unified way. Everything is treated as a X-finger
gesture now, and the action to take on finger movement is decided by
the gesture.finger_count setting. Pointer control now simply is seen as a
1 finger gesture, and 2fg scrolling as a 2fg gesture.
This removed the need for special-casing things like switching back to
pointer mode when lifting a finger in 2fg scrolling mode, and also lays the
groundwork for adding 3+ fg gesture support.
Note that 1 test-case needs to be updated to wait for the finger mode
switching when switching mode while a gesture has already been started.
This is actually an improvement as this stops sending spurious pointer
motion events at the end of 2fg scrolling when not lifting both fingers at
exactly the same time.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With the upcoming gesture support 2fg scrolling will be handled as part of
the main gesture state machine, whereas edge scrolling has its own state
machine, our current way of dispatching scroll "actions" does not play well
with this.
Change the scroll method handling to treat edge and 2fg scrolling as 2
separate state machines. The double scroll calls this introduces will mostly
be removed when the gesture handling code lands.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Some touchpads provide touch information while the finger hovers over the
touchpad, i.e. before BTN_TOUCH. Add a touch state for those touchpads so we
can ignore the touches until they actually start.
The approach is now: instead of BEGIN we mark a new touch as HOVERING.
Use the BTN_TOOL_FINGER, BTN_TOOL_DOUBLETAP information during
tp_process_state() to mark any touches that are hovering as down or ended.
i.e. provided BTN_TOUCH is down: if BTN_TOOL_FINGER is down, one hovering
touch gets marked as down, if DOUBLETAP is down, two touches are marked as
down, etc.
When ending touches, switch them back into HOVERING if the BTN_TOOL_FINGER
is still set, otherwise end them properly.
https://bugs.freedesktop.org/show_bug.cgi?id=87197
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is merged on top of the wheel normalization patches. Those introduced an
axis source and an extra "discrete" value to the various internal and external
APIs. This branch changed from a single value to passing dx/dy into all scroll
events.
The conflicts are to change everything to take x, y, x_discrete, y_discrete as
values (and the source axis mask of course).
Conflicts:
src/evdev-mt-touchpad-edge-scroll.c
src/evdev.c
src/libinput-private.h
src/libinput.c
The recent normalization of wheel events means we get the angle in degrees but
we don't know how this corresponds to clicks. The M325 has a 20 degree click
angle, most other mice have 15 degrees. So an angle of 60 can be 3 or 4 click
events.
Most clients care more about the click count than the angle on a mouse wheel.
Provide that value when needed.
Adding a discrete value to the axis event leaves the possibility of defining
discrete units for finger/continuous scroll sources in the future. Right now,
these will always reuturn 0.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Sending separate axis events instead of one unified events is limiting,
especially when simultaneously scrolling in both directions and the caller
tries to implement kinetic scrolling.
Take a page from the tablet-support branch and instead implement the axis
event as a generic event that can contain multiple axes simultaneously.
Right now we only have two (scroll) axes and we could easily just check both
for non-zero values. If we want to allow further axes in the future, we need
a check whether an axis is set in an event, that's what
libinput_event_pointer_has_axis to scroll events() is for.
We also need the mask to notify of a scroll stop event, which could otherwise
be confused as a vertical-only or horizontal-only event.
This is an API and ABI break.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
For a caller to implement/provide kinetic scrolling ("inertial scrolling",
"fling scrolling"), it needs to know how the scrolling motion was implemented,
and what to expect in the future. Add this information to the pointer axis
event.
The three scroll sources we have are:
* wheels: scrolling is in discreet steps, you don't know when it ends, the
wheel will just stop sending events
* fingers: scrolling is continuous coordinate space, we know when it stops and
we can tell the caller
* continuous: scrolling is in continuous coordinate space but we may or may not
know when it stops. if scroll lock is used, the device may never technically
get out of scroll mode even if it doesn't send events at any given moment
Use case: trackpoint/trackball scroll emulation on button press
The stop event is now codified in the API documentation, so callers can use
that for kinetic scrolling. libinput does not implement kinetic scrolling
itself.
Not covered by this patch:
* The wheel event is currently defined as "typical mouse wheel step", this is
different to Qt where the step value is 1/8 of a degree. Some better
definition here may help.
* It is unclear how an absolute device would map into relative motion if the
device itself is not controlling absolute motion.
* For diagonal scrolling, the vertical/horizontal terminator events would come
in separately. The caller would have to deal with that somehow.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Original patch, before the rebase onto today's master:
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We use 2 mechanisms to unregister the trackpoint event listener depending on
device removal order.
1) We have a device_removed callback, if the trackpoint gets removed before
the touchpad, this gets called, sees the device being removed is the trackpoint
and unregisters the listener
2) If the touchpad gets removed first, then in tp_destroy we unregister the
listener
2) May be delayed beyond the destruction of the trackpoint itself if the
libinput user has a reference to the libinput_device for the touchpad.
When this happens the trackpoint still has an eventlistener at destroy time
and an assert triggers.
To fix this we must do 2) at the same time as we do 1), so at remove time.
While working on this I noticed that the touchpad code was also cancelling
timers at destroy time rather then remove time, which means that they may
expire between remove and destroy time, and cause events to be emitted from
a removed device, so this commit moves the cancelling of the timers to the
remove callback as well.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
For certain applications (such as FPS games) it is necessary to use
unaccelerated motion events (the motion vector that is passed to the
acceleration filter) to get a more natural feeling. Supply this
information by passing both accelerated and unaccelerated motion
vectors to the existing motion event.
Note that the unaccelerated motion event is not equivalent to 'raw'
events as read from devices.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Add edge-scrolling support for non multi-touch touchpads as well as for
users who prefer edge-scrolling (as long as they don't have a clickpad).
Note the percentage to use of the width / height as scroll-edge differs from
one manufacturer to the next, the various per model percentages were taken
from xf86-input-synaptics.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=85635
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
