This is only used by the fallback dispatch method, not by any of the others.
Anything dispatch-specific should go into that struct.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rather than setting a magic device field and returning true/false just return
the dispatch method.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This timeout is there to switch to scrolling when the fingers rest on the
touchpad unmoving and thus avoids the initial scroll threshold for slow
scrolls.
Since the only other gestures we support are swipe (usually a fast movement)
and pinch-and-rotate (also a fast movement) we can drop the timeout down
significantly and thus make the scroll feel more reactive.
https://bugs.freedesktop.org/show_bug.cgi?id=93504
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Inspired by the syndaemon -K switch and Anton Lindqvist's patch.
https://patchwork.freedesktop.org/patch/102417/
We already ignored modifiers for dwt. Now we also ignore modifier + key
combinations, i.e. hitting Ctrl+s to save does not trigger dwt, the touchpad
remains immediately usable.
However, if dwt is already active and a modifier combination is pressed, dwt
remains active, i.e. while typing, a shift + key does not disable dwt.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Wherever we use an absolute size in mm on the touchpad, switch to the new
helper functions. In a few cases we only need one coordinate so just leave the
other one as 0 in those cases.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
And rename to make the return value more obvious
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
And rename to make it more obvious what the return value means.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
And rename to make it more obvious what the return value will mean.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
All these effectively returned bools anyway, switch the signature over to be
less ambiguous.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
These are internal functions, if we need them to return an error code we can
change that at any time. Meanwhile, if we only ever return 0 anyway we might
as well just make them voids to save on error paths.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
No functional changes, just makes the unit more explicit
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We simply don't have enough space on those touchpads to have an area carved
out for horizontal scrolling. Given that horizontal scrolling is rarely needed
anyway users of these touchpads will just have to cling to scroll bars or use
two-finger scrolling.
Exception are small clickpads because they already have an area blocked off
for software buttons and those small clickpads generally come from a time when
clickfinger wasn't much of a thing yet.
https://bugs.freedesktop.org/show_bug.cgi?id=96910
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
All Dell touchpas appear to have a visual marker on their touchpads. With a
visible marker our middle button can (and should) be much smaller since we
can rely on users to hit the button precisely.
https://bugs.freedesktop.org/show_bug.cgi?id=96710
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Expose the middle button emulation on software buttons as proper config
option. When enabled, remove the middle button software button area.
https://bugs.freedesktop.org/show_bug.cgi?id=96663
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Middle button emulation may be delayed in turning on, but during that delay we
already need to return the desired state.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
To unify this we need to move the tagging process forward so tp_init() can
rely on it for config setup. This means moving it to the touchpad init code.
Other than that no real functional changes, the rules stay the same:
* serial/i2c/etc. are considered internal touchpads
* Bluetooth is always external
* USB is external for Logitech devices
* USB is external for Wacom devices
* USB is internal for Apple touchpads
And if we can't figure it out, we assume it's external and log a message so we
can put a quirk in place.
https://bugs.freedesktop.org/show_bug.cgi?id=96735
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Increase the mm move threshold for 3 and 4 finger gestures to 2 and 3 mm,
respectively. In multi-finger gestures it's common to have minor movement
while all fingers are being put down or before the conscious movement starts.
This can trigger invalid gesture detection (e.g. a pinch instead of a swipe).
Increase the movement threshold to make sure we have sufficient input data.
No changes to 2-finger movements.
https://bugs.freedesktop.org/show_bug.cgi?id=96687
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
A natural hand position for a 4-finger swipe will have one finger well below
the other triggering the pinch detection. This is obviously wrong, only do the
finger position analysis when we have 2 fingers.
This is only a partial fix, for 3-4 finger gestures chances are high that the
third/fourth finger come in a different event frame. Before that we likely
detect 2 fingers in a possible pinch position and still trigger the code path.
This issue has to be fixed separately.
https://bugs.freedesktop.org/show_bug.cgi?id=96687
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The current code tried to emulate the relative motion to be equivalent to the
absolute motion, except in screen coordinates. This is way too slow for the
cursor tool that we want to behave like a mouse.
Tablets have high resolution (e.g. an Intuos 4 is a 5080dpi mouse) and that
motion is way too fast to be usable. Scale it down to match a 1000dpi device
instead. Since the cursor and lens tool are still high precision devices leave
them in a flat acceleration profile without actual acceleration.
For the stylus-like devices leave the current accel, pointer acceleration on a
stylus is hard to handle.
This also adds the missing bits for actually using the speed factor set
through the config interface.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Until the kernel patches to handle LED group switching are in place we provide
the external API backed by an implementation that simply exposes one group
with one mode and no toggle buttons. This allows us to ship a libinput release
with the API in place and switch libinput later without having all the stack
above us being delayed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Move mode control to libinput. This reduces some flexibility on what we can do
with modes but makes it a lot easier for anyone to implement modes correctly
and have the LEDs apply appropriately, etc. Let's go with the option to make
the 95% use-case easy. Note: whether the mode is actually used is up to the
caller, e.g. under Windows and OS X the mode only applies to the
rings/strips, not the buttons.
A tablet pad has 1 or more mode groups, all buttons/ring/strips are assigned
to a mode group. That group has a numeric mode index and is hooked to the
LEDs. libinput will switch the LEDs accordingly.
The mode group is a separate object. This allows for better APIs when it comes
to:
* checking whether a button/ring/strip is part of a mode group
* checking whether a button will trigger a mode transition
and in the future potentially:
* checking which mode transition will happen
* setting which button should change the mode transition
* changing what type of mode transition should happen.
* moving a button from one mode group to the other
This patch adds the basic scaffolding, without any real implementation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Proofread-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
They don't define anything, move them to the top so we don't have ordering
requirements of the stuff that actually uses those as parameters.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
The removal of the hysteresis even on precise touchpads has led to
difficulties controlling the cursor in a few instances. Since 27078b2667
we only have the hysteresis on Apple touchpads and the Lenovo *40 series and
later. Even on those do we see some positioning difficulties (bug 94379).
So restore the hysteresis by default again for all touchpads. In the future a
knob could be exposed for precision vs reactivity or something, but for now
the drawback of imprecise positioning does not outweigh the benefits we get
on those few devices.
https://bugs.freedesktop.org/show_bug.cgi?id=94379
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
