Do so on the synaptics serial touchpads at least, they're known to cause
cursor jumps when the third finger is down. Not detecting a tap move means
three-finger taps get more reliable on these touchpads.
This change affects gestures who now effectively have to wait for the tap
timeout to happen. It's a trade-off.
https://bugs.freedesktop.org/show_bug.cgi?id=101435https://bugzilla.redhat.com/show_bug.cgi?id=1455443
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Since meson commit ae9b238 "ninja: De-dup libraries and use --start/end-group"
we get linker errors with the tools. The duplication is apparently a bit too
agressive, swapping the order here make sure libinput isn't removed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reported-by: Michel Dänzer <michel@daenzer.net>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
The full information is now in the man page, the usage() now just tells you
how to use it. This way there's only one place to maintain it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
`abs` has been deprecated, and shut down last month. [1]
`asp` replaces it, so rewrite the instructions to use this instead.
Also, add `--noextract` to the makepkg command, as there is no point
downloading and extracting the sources since they're not going to be
built here.
[1] https://www.archlinux.org/news/deprecation-of-abs/
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is the behavior of configure as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
All the other config options have a simple true/false as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
On some devices, X coordinate is not working well, like if it is swapped:
click on right, pointer appear on left and vice versa.
To sort this issue, coordinates should be reflected on Y axis:
- new X position is changed (width is subtracted by X position)
- Y is unchanged (it was wrongly set to X)
In landscape (or portrait) mode:
[ x ]
[ y ]
[ 1 ]
* =
[ -1 0 1 ] [ x' ] = -x + 0*y + 1*width
[ 0 1 0 ] [ y' ] = 0*x + 1*y + 0*height
[ 0 0 1 ] [ 1 ]
This was verified using this touch screen (usb="0eef:0001")
E: ID_VENDOR=eGalax_Inc.
E: ID_VENDOR_ENC=eGalax\x20Inc.
E: ID_VENDOR_ID=0eef
https://bugs.freedesktop.org/show_bug.cgi?id=101474
Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The packages have been in stable for 6 weeks as of this patch, let's not worry
about the old ones.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No need for proper recovery here in this debugging tool.
Also sneak in a whitespace fix while we're here.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fixes compiler warning:
evdev.c:2899:2: warning: 'pri' may be used uninitialized in this function
[-Wmaybe-uninitialized]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Because it's too annoying to trigger the hot corner every few seconds while
pointer debugging.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Check arranges the tests into suites and test cases (which then can have
multiple test functions). The primary feature for suites is the ability to
select them with environment variables and that the log messages are printed
per suite, not per test case.
We used the suites to distribute tests across the processes forked by the test
runner, but that also resulted in slow suites relying on timeouts (tap/dwt) to
take a lot longer than other suites and hold everything else up.
This patch basically drops the use of check test suites. Our test runner has a
--filter-group argument which selects on suite names, the log messages are
more useful if they immediately include the device and the test case name.
So we just save the test metatdata in our own struct and then assemble a
suite/test case on the fly for each test.
The advantage of this is that tests of the same suite are now distributed
across the forks so slow tests that rely on length timeouts are now run in
parallel. This brings the test runs down to under 6 min again.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This makes it possible to run multiple test suite simultaneously on the same
host without messing up the other runs (provided that all instances use
the same udev/hwdb files). Previously, removing the udev rules/hwdb at the end
of a test run would cause test case failures in other runs that hadn't
completed yet.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
This adds specific pressure range values for the Elan touchpad found in
the Chromebook R13 CB5-312T (codename elm).
These values allow using the touchpad from the tip of the finger and
makes scrolling generally more reactive.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This adds generic pressure range values for I2C Elan touchpads used
with device-tree. These values were tested to work with various devices
and should be acceptable in most cases.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This adds support for detecting input peripherals based on their name
and the device-tree model of the device they're used with.
This is mostly an equivalent to dmi-based model detection (e.g. on x86
devices) for device that use device-tree (e.g. on ARM devices).
Note that this requires systemd updates, see
https://github.com/systemd/systemd/pull/5837
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Hopefully fixes the Semaphore CI build failures, apparently things are a bit
more restrictive there than in Fedora 26.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
b5e3fd04b2 added hooks for the libevdev log handler and that one
was added in libevdev 1.3 (released in Sep 2014).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is the first tool of many more to come to enable users to gather
information aobut their devices and/or usage of these devices. Previously,
these required the users to record events, submit them to a bugzilla, have me
run various scripts over it and then decree that the scripts have spoken.
Push some of this into the hands of the users so they can query the numbers
locally and start investigating (or at least get an idea of what's happening).
This tool measures the time deltas between touch up and touch down and prints
a basic summary, together with the ability to print a dat file with the data
for visualization by e.g. gnuplot. Eventually, more of the current analysis
scripts will be moved into this or other helpers.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Removed with commit 863fd1f0eb but now that we
exec each subcommand, the previous per-target compilation flags aren't needed
anymore. Build a static library to avoid rebuilding the source files for each
target.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Now that the debug-gui is a user-visible tool, make sure the usage reflects
the right command name.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
