On some devices with a tablet mode switch, the touchpad is inacessible when
in tablet mode and we don't really need this except to avoid possible ghost
touches (none have been mentioned so far). On other devices like the Lenovo
Yoga, the touchpad points to the back of the device and it's hard to use the
device without accidentally using the touchpad. For those, disabling the
touchpad is the best solution.
https://bugs.freedesktop.org/show_bug.cgi?id=102408
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This was originally designed to deal with devices that only have SW_LID. But
it can be moved into the evdev interface to avoid duplication once we have
SW_TABLET_MODE. The original assumption of the lid switch device being a
standalone device with no other switches is not true, having a separate
dispatch hurts us here.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some devices have worn-out switches or just cheap switches that trigger
multiple button events for each press. These can be identified by unfeasably
short time deltas between the release and the next press event. In the
recordings I've seen so far, that timeout is 8ms.
We have a two-stage behavior: by default, we do not delay any events but we
monitor timestamps. The first time a bouncing button is detected we switch to
debounce mode. From then on, release events are delayed slightly to check for
subsequent button events. If one occurs, the releas and press are filtered. If
none occurs, the release event is passed to the caller.
https://bugs.freedesktop.org/show_bug.cgi?id=100057
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Switch to a pure factor with a max scaled after a function. The offset is just
0 now (will be removed eventually). Both are determined with a function based
on a linear/exponential regression of a sample set of data pairs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We have heuristics for detecting whether a keyboard is internal or external,
but in some cases (e.g. Surface 3) these heuristics fail. Add a udev property
that we can apply to these cases so we have something that's reliable.
This will likely eventually become ID_INPUT_KEYBOARD_INTEGRATION as shipped by
systemd, similar to the touchpad property.
https://bugs.freedesktop.org/show_bug.cgi?id=101101
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
commit 3925936 introduced changes to container_of, this is hopefully the
last part of it.
In the linux kernel, container_of() takes a type name, and not a
variable. Without this, in some cases it is needed to declare an unused
variable in order to call container_of().
example:
return container_of(dispatch, struct fallback_dispatch, base);
instead of:
struct fallback_dispatch *p;
return container_of(dispatch, p, base);
This introduce also list_first_entry(), a simple wrapper around
container_of() to retrieve the first element of a non empty list. It
allows to simplify list_for_each() and list_for_each_safe().
Signed-off-by: Gabriel Laskar <gabriel@lse.epita.fr>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The Elantech touchpad model binding in udev is currently unused, since
pressure values were moved to a udev binding of their own.
This gets rid of the deprecated model binding.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Prefix device log messages with the device's sysname so it's more obvious
where the messages are coming from. This makes it much easier to grep for a
specific device's messages but also adds some identifier to messages that
were previously without any identifier (e.g. all the state machine debugging)
All info and error messages also automatically prefix the device name, so
those messages are standardised too, e.g
an info message now:
event4 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
a debug message now:
event4 - using pressure-based touch detection
And since this required changing a lot of the strings in messages anyway,
polish a few minor things too.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Before, our states were idle, button down and scrolling. This adds a state
where the button is down and the timeout has expired (i.e. we're ready to send
scroll events) but we haven't actually sent any events anymore.
If the button is released in this state, we generate a normal click event.
https://bugs.freedesktop.org/show_bug.cgi?id=99666
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
No functional changes, preparation work for adding another state.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Device needs BTN_MIDDLE disabled, this way middle button emulation is present
by default.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We don't initialize click methods on devices with physical buttons. This model
is a special case, it's not a clickpad but it only has one button (because one
button is all you ever need and whatnot).
https://bugs.freedesktop.org/show_bug.cgi?id=99283
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Set the dispatch type on creation, then check that whenever we try to get the
dispatch struct. This avoids a potential mismatch between the backends.
Plus, use of container_of means we're not dependent on the exact layout
anymore.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Create a lid_switch_interface to handle lid switch events, so the touchpad can
be disabled when lid is closed.
Signed-off-by: James Ye <jye836@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We used to mark dell touchpads this way but let's make this more generic.
Nothing else used the dell touchpad model flag, so we can simply replace it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This is added on top of the click angle handling, so the actual axis values
simply fall back onto whatever is set by udev, including the default fallbacks
to 15 and whatnot.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This touchpad has cursor jumps for 2-finger scrolling that also affects the
single-finger emulation. So disable any multitouch bits on this device and
disallow the 2-finger scroll method. This still allows for 2-finger
tapping/clicking.
https://bugs.freedesktop.org/show_bug.cgi?id=91135
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Move the code from the touchpad code into the more generic evdev code
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
center + diff is the input coordinate. Simplify the code so it's clear what
we're returning. And document the function to explain what it does.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Announces 4 slots but only sends data for the first two. This causes libinput
to miss three-finger actions (we don't look at BTN_TOOL_TRIPLETAP if we have
3 or more slots).
https://bugs.freedesktop.org/show_bug.cgi?id=98100
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Same as the HP Compat 8510, it doesn't send BTN_TOOL_DOUBLETAP/TRIPLETAP. This
may be a general issue with those series but they're 6 years old now, so
it's questionable to spend extra effort detecting them.
https://bugs.freedesktop.org/show_bug.cgi?id=98538
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
INPUT_PROP_BUTTONPAD is not set on this device and RMI4 which should fix this
is a bit too far into the future at this point. Hack around it.
https://bugs.freedesktop.org/show_bug.cgi?id=97147
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
So far we've relied on the wacom kernel module to do touch arbitration for us
but that won't be the case in upcoming kernels. Implement touch arbitration in
userspace by pairing the two devices and suspending the touch device whenever
a tool comes into proximity.
In the future more sophisticated arbitration can be done (e.g. only touches
which are close to the pen) but let's burn that bridge when we have to cross
it.
Note that touch arbitration is "device suspend light", i.e. we leave the
device enabled and the fd is active. Tablet interactions are comparatively
short-lived, so closing the fd and asking logind for a new one every time the
pen changes proximity is suboptimal. Instead, we just keep a boolean around
and discard all events while it is set.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
The touchpad's says it can do two- and three-finger detection but it never
sends events for it. Disable them so we treat it as pure single-finger
touchpad.
https://bugzilla.redhat.com/show_bug.cgi?id=1351285
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The Logitech MX master has different click angles for the two wheels.
https://github.com/systemd/systemd/issues/3947
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This is only used by the fallback dispatch method, not by any of the others.
Anything dispatch-specific should go into that struct.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All these effectively returned bools anyway, switch the signature over to be
less ambiguous.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
These are internal functions, if we need them to return an error code we can
change that at any time. Meanwhile, if we only ever return 0 anyway we might
as well just make them voids to save on error paths.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
