If we have a middle button but no wheels, enable on-button scrolling for the
middle button by default. This applies e.g. to the Logitech trackball added as
new test device here.
This makes the separate check for POINTINGSTICK obsolete but I'd rather leave
this in to be more explicit about it.
https://bugs.freedesktop.org/show_bug.cgi?id=90208
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Some devices provide abs x/y and rel x/y. We can't know which event the device
will send. The Microsoft Surface Type Cover sends relative events, which
then crashes libinput when we don't have an accel filter set up.
So instead of checking that the device doesn't have ABS_X/Y, check for the
device to have REL_X/Y instead.
https://bugzilla.redhat.com/show_bug.cgi?id=1206869
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
Not sure if any exists, if they do let's see if a user files a bug report
first so we know what to do with those (they're most likely buttonsets).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
Those touchpads presents an actual lower resolution that what is
advertised.
We see some jumps from the cursor due to the big steps in X and Y
when we are receiving data.
For instance, we receive:
E: 13.471932 0003 0000 16366 # EV_ABS / ABS_X 16366
E: 13.471932 0003 0001 9591 # EV_ABS / ABS_Y 9591
E: 13.471932 0000 0000 0000 # ------------ SYN_REPORT (0) ----------
E: 13.479924 0003 0000 16316 # EV_ABS / ABS_X 16316
E: 13.479924 0003 0001 9491 # EV_ABS / ABS_Y 9491
E: 13.479924 0000 0000 0000 # ------------ SYN_REPORT (0) ----------
E: 13.487939 0003 0000 16271 # EV_ABS / ABS_X 16271
E: 13.487939 0003 0001 9403 # EV_ABS / ABS_Y 9403
E: 13.487939 0000 0000 0000 # ------------ SYN_REPORT (0) ----------
-> jumps of ~50 in X in each report, and ~100 for Y.
Apply a factor to minimize those jumps at low speed, and try
keeping the same feeling as regular touchpads at high speed.
It still feels slower but it is usable at least
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some devices need specific configuration or different defaults.
Push that into udev rules and a hwdb file, that's where detection is the
easiest. The LIBINPUT_MODEL_ prefix is used to determine some type of device
model. Note that this property is a private API and subject to change at
any time without notice.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Similar to libinput_device_pointer_has_button(), this function returns whether
a given device has a specific keycode.
This enables a caller to determine if the device is really a keyboard (check
for KEY_A-KEY_Z) or just a media key device (check for KEY_PLAY or somesuch),
depending on the context required.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
There is quite a wide spread in the delta events generated by trackpoints,
some generate deltas of 1-2 under normal use, while others generate deltas
from 1-20.
It is desirable to normalize trackpoint deltas just like we are normalizing
mouse deltas to 1000 dpi, so as to give different model laptops aprox.
the same trackpoint cursor speed ootb.
Recent versions of udev + hwdb set a POINTINGSTICK_CONST_ACCEL udev property
which can be used to adjust trackpoints which are too slow / too fast
ootb, this commit implements support for that property.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This is sort-of legitimate, so simply disable the axes and continue.
Any real axis we require to have a real range.
https://bugs.freedesktop.org/show_bug.cgi?id=90090
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Devices that have left and right buttons but no middle button get middle
button emulation (without config). Devices that have a middle button too get
a config option but default to off. Most mice have LMR set as buttons,
regardless whether they have a middle button.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This is just the required framework, it's not hooked up to anything just yet.
Hooking it up comes as separate commit to better detail why/when a device
supports emulation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
No functional changes at this point, this merely splits up any physical
buttons (i.e. that represent buttons that exist on that device) vs. other
buttons that are emulated in some way or another.
This is in preparation for the addition of middle button emulation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Follow-up to e2f61b8fb7.
Scroll events are sent through the pointer interface, so we must set the
capability. Otherwise a caller may not have the required bits set up and is a
bit surprised by events coming out of an interface the device doesn't actually
have (xf86-input-libinput crashes when this happens).
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This is a kernel bug, reject such devices outright. This saves us from a bunch
of extra double checks to make sure that the resolutions are always set up.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Regression introduced in 9f8edc5fd8 where it
changed from delta / (dpi/default) to delta * dpi/default, causing the inverse
effect of what the dpi setting is supposed to achieve.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The previous code didn't handle fake MT devices without ABS_X/Y axes (like the
Razer BlackWidow keyboard). Those devices usually start at ABS_MISC and go up
to ABS_MAX, thus triggering the Android check.
Split the condition up: if the device is not a fake MT device we check for the
Android missing axes first and add them. Then we proceed, but now we know that
the ABS_X axis must exist on any valid device.
https://bugs.freedesktop.org/show_bug.cgi?id=89783
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
libevdev_set_abs_info() is a noop if the event code isn't enabled on the
device. This leaves ABS_X/Y on NULL, causing a crash later when dereferencing
the absinfo.
https://bugs.freedesktop.org/show_bug.cgi?id=89783
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Add a normalized_is_zero helper function, and use it where applicable.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Except for a few axes where this may be correct, a min == max axis range
indicates a broken kernel driver. To avoid potential divisions by zero when
scaling this axis later, reject such a device outright.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Make the helper function accessible from other places (will be needed in an
upcoming patchset). This also now takes a custom resolution as argument
instead of always setting it to 1, and allows overriding a fake resolution
after the fact.
And instead of a hardcoded 1 everywhere, use a define for the resolution.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This way the unaccelerated deltas returned by libinput are correct.
To maintain the current behavior we slow down the input speed by the magic
factor and likewise the accelerated output speed. This produces virtually the
same accelerated deltas as the previous code.
The magic factor is applied to the default denominator for guessing a
resolution based on the touchpad diagonal. We can't really get around this
without having a resolution from the touchpad; meanwhile this produces
virtually the same coordinates before/after.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We really don't need to deal with devices that have x but not y or vice versa.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
These devices don't provide ABS_X/Y, but do have proper multitouch.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Make it clear where we're dealing with device coordinates and where we're
dealing with DPI-normalized coordinates.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We don't have real support for them yet but they have the ID_INPUT_TABLET tag
set. Ignore them explicitly before someone thinks they're already working.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-and-tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
If the device doesn't have any slots, mtdev->caps.slot.maximum is 0. Since we
only use mtdev if we don't have slots, this caused protocol A devices to
always fail.
https://bugs.freedesktop.org/show_bug.cgi?id=89211
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Bluetooth tablet devices' rules can't tag the event node directly, they can
only tag the first parent (the /sys/class/input/input1234 node). Check that
parent for tags too, lest we miss something important.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Store it as identifier in the device group, any two devices that have a
the same non-NULL identifier share the group.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Use ID_INPUT_FOO to assume a device is a FOO, don't decide ourselves based on
whatever bits are available. This moves the categorization out to udev's
input_id builtin by default and other bits that tag the device. libwacom tags
all known devices as ID_INPUT_TABLET and (for touch-enabled ones)
ID_INPUT_TOUCH - we can re-use that knowledge then.
Ignore anything that doesn't have ID_INPUT set, this provides for an easy way
of making devices "invisible" to libinput.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
udev already tags the devices by opening each of them and analyzing their
features. We are basically re-doing this in libinput.
The advantage of udev tags over the plain heuristic from libinput is that
users (or driver writers) can force some tags that are not detected by
common rules. For instance, the pad part of the Wacom tablets is difficult
to discriminate from a joystick or a pointer.
For now we tread INPUT_ID_KEY and INPUT_ID_KEYBOARD as equivalent. It may
become necessary to separate them later.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Devices like Wacom tablets have multiple event nodes (touch, pad and stylus).
This requires some logical grouping, e.g. setting an Intuos 5 tablet
left-handed effectively turns it upside down. That then applies to both the
stylus and the touch device.
Merging the devices into one struct libinput_device is not feasable, it
complicates the API for little benefit. A caller would still need access to
all subdevices to get udev handles, etc. Some configuration options apply to
the whole device (left-handed) but some (may) only apply to a single subdevice
(calibration, natural scrolling).
Addressing this would make the libinput API unwieldly and hard to use.
Instead, add a device group concept. Each device is a member of a device
group - a singleton for most devices. Wacom tablets will have a single group
across multiple devices, allowing the caller to associate the devices together
if needed.
The API is intentionally very simple and requires the caller to keep track of
groups and which/how many devices are in it. The caller has more powerful
libraries available to do that than we have.
This patch does not address the actual merging of devices into the same
device group, it simply creates a new group for each new device.
[rebased on top of 0.10]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Note: touchpads have a different backend, we never get here in that case. This
only applies to true absolute pointer devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
After switching my main workstation over to using xf86-input-libinput, I
noticed that the multi-media keys like play/pause on my keyboard no longer
worked.
It turns out that the second hid interface on my keyboard which has the
multimedia-keys, also declares having: BTN_BASE6 and BTN_MODE which both
fell into the range we were using to test for something being a joystick.
The commit makes our joystick test mode strict, restoring functionality
of the multi-media keys on the keyboard in question.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some devices require more than just flipping around the buttons, such as
tablets.
When it comes to devices like tablets, because the position of the palm rest is
on the right, the entire tablet has to be flipped around in order to be usable
by lefties. As such, this requires that we reverse the coordinates of the
tablets in addition to flipping the buttons on the tablet. As such, renaming
these functions so that they aren't specific to devices where only the buttons
are flipped seems appropriate.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is merged on top of the wheel normalization patches. Those introduced an
axis source and an extra "discrete" value to the various internal and external
APIs. This branch changed from a single value to passing dx/dy into all scroll
events.
The conflicts are to change everything to take x, y, x_discrete, y_discrete as
values (and the source axis mask of course).
Conflicts:
src/evdev-mt-touchpad-edge-scroll.c
src/evdev.c
src/libinput-private.h
src/libinput.c
The recent normalization of wheel events means we get the angle in degrees but
we don't know how this corresponds to clicks. The M325 has a 20 degree click
angle, most other mice have 15 degrees. So an angle of 60 can be 3 or 4 click
events.
Most clients care more about the click count than the angle on a mouse wheel.
Provide that value when needed.
Adding a discrete value to the axis event leaves the possibility of defining
discrete units for finger/continuous scroll sources in the future. Right now,
these will always reuturn 0.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
