Similar to tapping, it's a feature that is useful but confusing if a user
doesn't know it exists. It makes the touchpad appear laggy and slow to react
in the best case, or appear like a stuck button in the worst case.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
No functional change, other than that we check for status codes now too.
In tests that don't specifically check the interface itself, a short
enable_tap() or disable_tap() is a lot more obvious to parse for the reader.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Alps devices don't know if there is a physical middle button on the touchpad,
so they always report one.
Since a large number of touchpads only have two buttons, enable middle button
emulation by default. Those that really don't want it can play with
configuration options, everyone else has it working by default.
The hwdb entry uses "*Alps ..*" as name to also trigger the "litest Alps..."
devices.
https://bugzilla.redhat.com/show_bug.cgi?id=1227992
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Most scroll motions would be labelled a palm.
https://bugs.freedesktop.org/show_bug.cgi?id=90980
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The previous set hit _some_ sort of limit, but no idea what or why. When
adding one more test, the touchpad test case would reliably fail with a udev
timeout in litest_wait_for_udev(). This only happened in the valgrind case,
the normal run succeeded. Reproduced on three different installations (2 vms
on two different hosts).
Move the tapping tests into a separate binary, this unwedges whatever was
unhappy and sunshine, lollipops and rainbows are distributed generously.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
To quote Bryce Harrington from [1]:
"MIT has released software under several slightly different licenses,
including the old 'X11 License' or 'MIT License'. Some code under this
license was in fact included in X.org's Xserver in the past. However,
X.org now prefers the MIT Expat License as the standard (which,
confusingly, is also referred to as the 'MIT License'). See
http://cgit.freedesktop.org/xorg/xserver/tree/COPYING
When Wayland started, it was Kristian Høgsberg's intent to license it
compatibly with X.org. "I wanted Wayland to be usable (license-wise)
whereever X was usable." But, the text of the older X11 License was
taken for Wayland, rather than X11's current standard. This patch
corrects this by swapping in the intended text."
libinput is a fork of weston and thus inherited the original license intent
and the license boilerplate itself.
See this thread on wayland-devel here for a discussion:
http://lists.freedesktop.org/archives/wayland-devel/2015-May/022301.html
[1] http://lists.freedesktop.org/archives/wayland-devel/2015-June/022552.html
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Jonas Ådahl <jadahl@gmail.com>
On touchpads with resolutions, use a 5mm motion threshold before we unpin the
finger (allow motion events while a clickpad button is down). This should
remove any erroneous finger movements while clicking, at the cost of having to
move the finger a bit more for a single-finger click-and-drag (use two fingers
already!)
And drop the finger drifting, it was per-event based rather than time-based.
So unless the motion threshold was hit in a single event it was possible to
move the finger around the whole touchpad without ever unpinning it.
Drop the finger drifting altogether, if the touchpad drifts by more than 5mm
we have other issues.
https://bugzilla.redhat.com/show_bug.cgi?id=1230462
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We can't rely on the system having these files installed, at least not in the
latest version that we'd like.
Copy them over from the source directory into the /run/ and /etc/ directories
for each test and update udev and the hwdb. This ensures the tags we set in
the hwdb file are always set, regardless of the system configuration.
Note that the /run/udev/* files need to have a different filename to the ones
we ship to avoid getting overridden by local configuration.
systemd does not have support for /run/udev/hwdb.d [1]. So our hwdb.d file
is in /etc/udev/hwdb.d instead and marked them with a REMOVEME and a comment
that if that file is left after the tests, it should be removed by the user.
[1] https://github.com/systemd/systemd/issues/127
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: JoonCheol Park <jooncheol@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Previous expansion had side-effects when litest_log was called in an if
condition without {}
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
A common use-case for clickfinger is to use the index finger for moving the
pointer, then triggering the click with a thumb. If the index finger isn't
lifted before the click this counted as two-finger click.
To avoid this, check the distance between touches on the touchpad (on
touchpads reporting resolution values anyway). If the touches are too far
apart, don't count them together (or specifically only count those close
enough together as multi-finger).
The touch area is uneven, it's wider than high. Spreading fingers horizontally
is more common and this also makes it easier to rule out thumbs which tend to
be well below the fingers.
http://bugs.freedesktop.org/show_bug.cgi?id=90526
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Added code to check for errors in getcwd() and system() that
were previously ignored and silently dropped.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In the current code, a timeout or direction change on the first tracker will
result in a velocity of 0. Really slow movements will thus always be zero, and
the first event after a direction is swallowed.
Enforce a minimum velocity:
In the case of a timeout, assume the current velocity is that of
distance/timeout. In the case of a direction change, the velocity is simply
that since the last tracker.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
When we get the release event within the timeout, we send a press + release
event for the middle button. Rather than using the release event's timestamp
for both, remember and use the button press timestamp.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
If asprintf fails for any reason, the contents of the pointer
are undefined. While some platforms set it to NULL, there is no
guarantee that all will.
This change adds a simple wrapper to ensure proper NULL results
on failure.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Added LIBINPUT_PRINTF attribute and the required declaration for it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Wait after deleting a device so udev can catch up with everything and the
various hooks to make sure it's happy with any newly created devices after
this.
The sleep is in the delete path to also cover the tests where we manually
create uinput devices rather than using the litest hooks.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The current code labels a touch as palm if it started within the typing
timeouts. To move the pointer even after the timeout expires, a user has to
lift the finger which is quite annoying and different to the old synaptics
driver behaviour (which had a simple on/off toggle on whether to let events
through or not).
Be smarter about this: if a touch starts _after_ the last key press event,
release it for pointer motion once the timeout expires. Touches started before
the last key press remain labelled as palms. This makes it possible to rest
the palm on the touchpad while typing without getting interference but also
provides a more responsive UI when moving from typing to using the touchpad
normally.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Check a couple of easy yes/no definitives that cover most Lenovo laptops,
and avoid false positives on Wacoms.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
On slower machines, e.g. VMs, udev isn't fast enough to get the properties set
up by the time we're trying to get the device going. This fails when we try to
add the device with libinput_path_add_device().
We know that all litest devices will have ID_INPUT set, so check for that
before we continue.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Well, the patch looks like the HAVE_LIBUNWIND bit was moved down, which is the
same thing.
litest_log and litest_vlog are called from independent paths, we have a
compiler error otherwise.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Was added to other places, missing from here so some tests passed the filter
despite not being selected by it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The litest-selftest has its own main method and compiles litest.c with special
flags. Use that to ifdef out the litest.c main function, and inline the
litest_run/litest_parse_args functions so gcc doesn't complain about unused
functions.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
