This is not a frequent toggle, so we don't need to jump through too many hoops
here. We simply enable/disable on command and once any current timeouts have
expired the new setting takes effect.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This was a stopgap measure to support the Lenovo Carbon X1 3rd and the Lenovo
*50 series. These devices have the trackpoint buttons wired to the touchpad
and thus trackpoint events came from the touchpad device.
This was fixed in the kernel commit cdd9dc195916ef5644cfac079094c3c1d1616e4c,
the systemd hwdb to set this property was removed in 05304592457e01 so nothing
sets this property anymore. Drop it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We're again hitting the fork ulimits again (see also 9c2afae14) causing test
case failures in the valgrind run of the touchpad test.
Split out the touchpad button tests so we don't require special ulimits on
test boxes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Installing the udev rules and reloading udevadm takes around 150ms each
time. For test-pointer alone (currently 336 tests) this adds almost a
minute to the runtime.
The model quirks and libinput udev rules don't change, so installing them once
at the start of the test run is sufficient.
Unfortunately, now that we're not as slow anymore to initialize, we need to
up the maximum wait time for the path device to wait for a udev device to
initialize.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
When the touch leaves the area for edge scrolling after starting to scroll,
discard any movement. This signals to the user that they've left the area and
forces them to lift the finger to switch back to motion. If the finger moves
back into the area, scrolling continues.
https://bugs.freedesktop.org/show_bug.cgi?id=91323
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
edge scrolling disables some palm detection, so we can't run those tests when
active. That fell through the cracks so far, all devices with edge scroll by
default were too small to enable palm detection.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
On the synaptics hover device where this test is run, we'd eventually get into
the edge scroll zone. When edge scrolling is enabled this causes the test to
fail.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Synatics touchpads only have 2 slots, but support TRIPLETAP and above. When
the third finger touches, the kernel may end the second slot and re-start it
with the coordinates of the third touch in the next frame. The event sequence
is something like:
ABS_MT_SLOT 0
ABS_MT_POSITION_X 4000
ABS_MT_POSITION_Y 4000
ABS_MT_PRESSURE 78
ABS_MT_SLOT 1
ABS_MT_TRACKING_ID -1
ABS_X 4000
ABS_Y 4000
ABS_PRESSURE 78
BTN_TOOL_DOUBLETAP 0
BTN_TOOL_TRIPLETAP 1
--- SYN_REPORT (0) ----------
ABS_MT_SLOT 0
ABS_MT_POSITION_X 4000
ABS_MT_POSITION_Y 4000
ABS_MT_PRESSURE 78
ABS_MT_SLOT 1
ABS_MT_TRACKING_ID 55
ABS_MT_POSITION_X 2000
ABS_MT_POSITION_Y 2000
ABS_MT_PRESSURE 72
ABS_X 4000
ABS_Y 4000
ABS_PRESSURE 78
--- SYN_REPORT (0) ----------
libinput usually ignores any BTN_TOOL_* <= num_slots since we expect
that the slot values are valid. Make an exception for the serial synaptics
touchpads. If a touch has ended when the fake touch goes above active-slots
(but still within num-slots), move that touch back to UPDATE. This ensures the
right number of nfingers_down. When the touch restarts again in the next
frame, tp_begin_touch() will skip over re-initializing it because it's already
in UPDATE anyway.
Note that at this point this only handles the transition _to_ TRIPLETAP, not
from TRIPLETAP to DOUBLETAP. Need to wait for this to be seen in the wild
first.
https://bugs.freedesktop.org/show_bug.cgi?id=91352
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Hallelujah-expressed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Hallelujah-expressed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
3mm is too large, it makes the touchpad feel sluggish. We already take fuzz
into account through the hysteresis and the real issue we have with the
pointer moving on a click is _before_ the BTN_LEFT event comes in, not after.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
3mm is too large, especially on fine-grained scroll motions. Since we
already use the hysteresis to defuzz the current touchpad point, having a
slower threshold here should not cause any adverse motions.
This affects the pinch gestures too and needs a minor test adjustment. The
atmel hover device's resolution is low enough that we trigger a >1 degree
angle now, make the movement a bit more finegrained.
https://bugs.freedesktop.org/show_bug.cgi?id=91364
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Removes some dead assignments, an unused function, and
uses %d format specifier for int.
Signed-off-by: Thomas Hindoe Paaboel Andersen <phomes@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
3finger swipe, pinch and spread. While we expect the pinch/spread to have a
zero angle, the discrete coordinates we use cause some angle, but below 1
degree.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is an old recording and predates properties. It's not a clickpad, we
assume INPUT_PROP_POINTER is set.
From: https://bugs.freedesktop.org/attachment.cgi?id=57154
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a device sends other events at startup, those events weren't freed. This
can happen on tablet devices that send proximity events immediately after
DEVICE_ADDED.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
udev requires callout binaries to sit in /lib/udev or otherwise provide an
absolute path. The test suite should work without installing everything first,
so create two rule files - one to install, one with the path to the
$builddir/test
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The touchpads currently all send a default value of 30 for ABS_PRESSURE. For
some tests we want to have a custom pressure but changing all tests isn't
sensible. So hook each device up to send a default value of 30 if it isn't
overridden in the test itself.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Watching a colleague try clickfinger right-click after enabling it the first
time showed that the vertical distance is too small. Increase it to 30mm
instead.
Increase the allowed spread between fingers to 40x30mm, but check if one of
the fingers is in the bottom-most 20mm of the touchpad. If that's the case,
and the touchpad is large enough to be feasable for resting a thumb on it,
discard the finger for clickfinger count.
If both fingers are in that area or one finger is in the area and they're
really close together, the fingers count separately and are not regarded as
thumb.
https://bugs.freedesktop.org/show_bug.cgi?id=91046
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Makes the test code easier to read. In tests where we explicitly check the API
the real calls were left in place.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
No functional changes, just so we can group those helpers together.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Adds the macros ck_assert_double_{eq,ne,lt,gt,le,ge} to compare double
values using a fixed tolerance value. The tolerance value is
picked based on the range of values to be expected by the libinput API.
Signed-off-by: Andreas Pokorny <andreas.pokorny@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This device provides a circular touch point size and and hence lacks
orientation. It will be used to test default value handling.
Signed-off-by: Andreas Pokorny <andreas.pokorny@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Adds a device with various touch related axes and respective device features
to litest.
Signed-off-by: Andreas Pokorny <andreas.pokorny@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This change adds strict axis_replacement and litest_touch_move_extended
and litest_touch_down_extended to simulate changes to other axes during
touch down and move events.
Signed-off-by: Andreas Pokorny <andreas.pokorny@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Implement touchpad pinch (and rotate) gesture support.
Note that two two-finger scrolling tests are slightly tweaked to assure that
there is enough touch movement to allow the scroll-or-pinch detect code to do
its work.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
Extend the touchpad gesture API with pinch gestures. Note that this
new API offers a single event stream for both pinch and rotate data, this
is deliberate as some applications may be interested in getting both at
the same time. Applications which are only interested in one or the other
can simply ignore the other.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
For touchscreens we always send raw touch events to the compositor, and the
compositor or application toolkits do gesture recognition. This makes sense
because on a touchscreen which window / widget the touches are over is
important context to know to interpret gestures.
On touchpads however we never send raw events since a touchpad is an absolute
device which primary function is to send pointer motion delta-s, so we always
need to do processing (and a lot of it) on the raw events.
Moreover there is nothing underneath the finger which influences how to
interpret gestures, and there is a lot of touchpad and libinput configuration
specific context necessary for gesture recognition. E.g. is this a clickpad,
and if so are softbuttons or clickfinger used? What is the size of the
softbuttons? Is this a true multi-touch touchpad or a semi multi-touch touchpad
which only gives us a bounding box enclosing the fingers? Etc.
So for touchpads it is better to do gesture processing in libinput, this commit
adds an initial implementation of a Gesture event API which only supports swipe
gestures, other gestures will be added later following the same model wrt,
having clear start and stop events and the number of fingers involved being
fixed once a gesture sequence starts.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
When the condition with continue was hit, syspath was still compared in the
loop condition, leading to crashes when strcmp()-ing a random string.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This test doesn't really test for that because the kernel shouldn't forward
these events to us in the first place. It's merely a canary to warn us if this
ever changes and we end up not ignoring the events.
The test is only run for one device (the default mouse), no need to waste more
time on this.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Since 69449ca854, the minimum deceleration is 0.3 and we don't get a 0 motion
event anymore. We can drop the helper function now too.
What we do in that test instead is pump one relative motion event through
before we start comparing the events, this way our second, third, .. events
will have some acceleration applied and the tests compare more accurate
values.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
