Currently unused, but store the ratio of DPI:default DPI for later use.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
To quote Bryce Harrington from [1]:
"MIT has released software under several slightly different licenses,
including the old 'X11 License' or 'MIT License'. Some code under this
license was in fact included in X.org's Xserver in the past. However,
X.org now prefers the MIT Expat License as the standard (which,
confusingly, is also referred to as the 'MIT License'). See
http://cgit.freedesktop.org/xorg/xserver/tree/COPYING
When Wayland started, it was Kristian Høgsberg's intent to license it
compatibly with X.org. "I wanted Wayland to be usable (license-wise)
whereever X was usable." But, the text of the older X11 License was
taken for Wayland, rather than X11's current standard. This patch
corrects this by swapping in the intended text."
libinput is a fork of weston and thus inherited the original license intent
and the license boilerplate itself.
See this thread on wayland-devel here for a discussion:
http://lists.freedesktop.org/archives/wayland-devel/2015-May/022301.html
[1] http://lists.freedesktop.org/archives/wayland-devel/2015-June/022552.html
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Jonas Ådahl <jadahl@gmail.com>
Our motion filter takes the last couple of vectors to calculate speed,
provided the direction stays the same and it is within a certain timeout. It
does not take into account lifting the finger, so the velocity on the first
event is off.
Real-world impact is mainly on scrolling. Before commit 289e4675
filter: enforce minimum velocity
the first motion on a scroll was accelerated by a factor of 0 and swallowed.
After 289e4675 the motion was calculated based on the timeout and a fraction
of the expected effect. Now the first scroll motion is based on the real
finger motion since setting the finger down and thus feels a bit more
responsive.
It also makes a couple of test cases using litest_assert_scroll() work again
since the miniumum motion is now as expected.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Those touchpads presents an actual lower resolution that what is
advertised.
We see some jumps from the cursor due to the big steps in X and Y
when we are receiving data.
For instance, we receive:
E: 13.471932 0003 0000 16366 # EV_ABS / ABS_X 16366
E: 13.471932 0003 0001 9591 # EV_ABS / ABS_Y 9591
E: 13.471932 0000 0000 0000 # ------------ SYN_REPORT (0) ----------
E: 13.479924 0003 0000 16316 # EV_ABS / ABS_X 16316
E: 13.479924 0003 0001 9491 # EV_ABS / ABS_Y 9491
E: 13.479924 0000 0000 0000 # ------------ SYN_REPORT (0) ----------
E: 13.487939 0003 0000 16271 # EV_ABS / ABS_X 16271
E: 13.487939 0003 0001 9403 # EV_ABS / ABS_Y 9403
E: 13.487939 0000 0000 0000 # ------------ SYN_REPORT (0) ----------
-> jumps of ~50 in X in each report, and ~100 for Y.
Apply a factor to minimize those jumps at low speed, and try
keeping the same feeling as regular touchpads at high speed.
It still feels slower but it is usable at least
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This way the unaccelerated deltas returned by libinput are correct.
To maintain the current behavior we slow down the input speed by the magic
factor and likewise the accelerated output speed. This produces virtually the
same accelerated deltas as the previous code.
The magic factor is applied to the default denominator for guessing a
resolution based on the touchpad diagonal. We can't really get around this
without having a resolution from the touchpad; meanwhile this produces
virtually the same coordinates before/after.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Ideally we want to specify various thresholds in mm, but not all touchpads
set the hardware resolutions. Rather than conditions to check for resolutions
everywhere, use a macro to give us a normalized value that we use for motion
as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
400 used to be the default DPI for many mice but it it's not anymore. A survey
of mice shows that 400 is still common as one of the pre-configured settings
in switchable multi-resolution gaming mice, but devices with a single
resolution mostly favor 1000 dpi.
Let's make that switch now so that any future changes to the pointer
acceleration code assumes that resolution as a default.
For the touchpad, this has a bad side-effect, caused by our expectation of
mouse vs touchpad behaviours: our acceleration code ignores device type and
provides the same acceleration for the same physical movement. Unfortunately,
we expect touchpads to be significantly slower than mice.
The previous 400 DPI worked because it caused an acceptable slowdown on input.
e.g. on the T440 with a res of 42 units/mm, the scale coefficient was 0.37.
For 1000 DPI as default, this now results in 0.94, i.e. speeding up the
touchpad by a factor of 2.5. That is way too fast.
Adding touchpad-specific filter code is a bigger project, so let's just add a
fixme for now and scale the coefficient back to what it was before the
DPI default change. Effect: touchpad behaves as before.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The filter code is what relies on some default dpi configuration to apply
pointer acceleration and expects the input coordinates to be pre-scaled to
that resolution.
Let's move the define here so we can use it from the touchpad code too.
No functional changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
To keep the implementation of a filter separate from the users of a filter.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We ran a userstudy, evaluating three different accel methods. Detailed results are
available at:
http://www.who-t.net/publications/hutterer2014_libinput_ptraccel_study.pdf
We found that there was little difference between the method we had in
libinput 0.6 and this three-line function. Users didn't really notice a
difference, but measured data suggests that it has slight advantages in some
use-cases.
The method proposed here is the one labeled "linear" in the paper, its profile
looks roughly like this:
_____________
/
____/
/
/
where the x axis is the speed, y is the acceleration factor.
The first plateau is at the acceleration factor 1 (i.e. unaccelerated
movement), the second plateau is at the max acceleration factor. The threshold
in the code defines where and how long the plateau is.
Differences to the previous accel function:
- both inclines are linear rather than curved
- the second incline is less steep than the current method
From a maintainer's point-of-view, this function is significantly easier to
understand and manipulate than the previous one.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
In an attempt to bring method into the madness, normalize the touchpad deltas
to those of a USB mouse with 400 dpi. This way the data we're dealing with in
the acceleration code is of a known quantity.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
For better consistency with filter_dispatch(). And move the things around to keep
the consumable API together.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This patch reimplements the simple smooth pointer acceleration profile
from X.org xserver. The algorithm is identical to the classic profile
with a non-zero pointer acceleration threshold.
When support for changable parameters is in place, to get a pointer
acceleration the same as the default classic profile of X.org a
polynomial acceleration profile should be used for when the threshold
parameter is zero.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We store timestamps in ms since system boot (CLOCK_MONOTONIC). This will wrap
after circa 50 days.
I've considered making our code wrapping safe, but that won't work. We also
use our internal timestamps to program timer-fds for timeouts. And we store
ms in a single integer but the kernel uses 2 integers, one for seconds and
one for usec/nanosec. So at 32 bits our ms containing integer will wrap
in 50 days, while the kernels seconds storing integer lasts a lot longer.
So when we wrap our ms timestamps, we will be programming the timer-fds
with a seconds value in the past.
So change all our internal timestamps to uint64_t to avoid the wrapping
when programming the timer-fds. Note that we move from 64-bit timestamps to
32-bit timestamps when calling the foo_notify_bar functions from
libinput-private.h. Having 64 bit timestamps has no use past this point,
since the wayland input protocol uses 32 bit timestamps (and clients will
have to deal with wrapping).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This commit introduces build script configuration for building a shared
library 'libinput.so' containing the evdev input device functionality
from weston.
evdev.c, evdev.h and evdev-touchpad.c are ported to not use the data
structures and API in weston and libwayland-server in order to minimize
dependencies.
The API of filter.c and filter.h are renamed to not include the
'weston_' prefix.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
config.h includes were missing in a few files, including input.c, the
lack of which caused the X11 backend to segfault instantly due to not
having an xkbcommon context.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Touchpad related code has been rewritten and moved to its own file
accessed by evdev via the dispatch interface.
The various functionality implemented are anti-jitter (don't jumping
around), smoother motions, touch detection, pointer acceleration and
some more.
Pointer acceleration is implemented as one generic part, and one touch
specific part (a profile).
Some ideas and magic numbers comes from xserver and
xf86-input-synaptics.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
