doxygen ends the @bug command when a new section command (@code) is
encountered, leaving us with an "Example code:" on the Bug List page.
Add an empty line to cut off here.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is a leftover from when libinput was part of weston and we could
interpret properties correctly. Realistically, the only way this could work
with libinput as external library is if we define precisely what the
definition of an output is. Practically, it's a lot easier to just throw up
our hands and leave it all to the caller.
https://bugs.freedesktop.org/show_bug.cgi?id=100707
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This will allow switch devices known to libinput to be exposed. Currently,
this is SW_LID.
libinput also handles switch events internally, e.g. a laptop touchpad will
be disabled autmoatically when the lid is closed. This is transparent to
the caller, although the caller will also receive the event. See
https://bugs.freedesktop.org/show_bug.cgi?id=86223
This features is intended to be the main driver for the interface.
Co-Authored-By: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: James Ye <jye836@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The previously hardcoded button map for tapping is 1/2/3 to LRM. But the
middle button is a common feature on the desktop (used for paste, most
prominently) and three-finger tapping is almost impossible to do reliably on
some touchpads (e.g. the T440 has a recognition rate of ~1 in 5).
Left and right buttons have a prominent physical position (either softbuttons
or physical buttons) so make the tap order configurable. Those that require
middle buttons reliably can use the [software] buttons for left/right and
2-finger tap for a middle button.
https://bugs.freedesktop.org/show_bug.cgi?id=96962
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Expose the middle button emulation on software buttons as proper config
option. When enabled, remove the middle button software button area.
https://bugs.freedesktop.org/show_bug.cgi?id=96663
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Move mode control to libinput. This reduces some flexibility on what we can do
with modes but makes it a lot easier for anyone to implement modes correctly
and have the LEDs apply appropriately, etc. Let's go with the option to make
the 95% use-case easy. Note: whether the mode is actually used is up to the
caller, e.g. under Windows and OS X the mode only applies to the
rings/strips, not the buttons.
A tablet pad has 1 or more mode groups, all buttons/ring/strips are assigned
to a mode group. That group has a numeric mode index and is hooked to the
LEDs. libinput will switch the LEDs accordingly.
The mode group is a separate object. This allows for better APIs when it comes
to:
* checking whether a button/ring/strip is part of a mode group
* checking whether a button will trigger a mode transition
and in the future potentially:
* checking which mode transition will happen
* setting which button should change the mode transition
* changing what type of mode transition should happen.
* moving a button from one mode group to the other
This patch adds the basic scaffolding, without any real implementation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Proofread-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
They don't define anything, move them to the top so we don't have ordering
requirements of the stuff that actually uses those as parameters.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Trackballs are effectively stationary devices and can be positioned at any
rotation. They are also employed by users with impaired dexterity which
sometimes implies that they are positioned at an non-default angle to make the
buttons easier to reach.
Add a config option for rotation for trackball devices. Currently only
supported for 90-degree angles, if there is a need we can add more angles
later.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
It's a bit hard to find what can be configured in the wall of text that is the
doxygen output. Add a TOC of the various options so it's easy to get a quick
grasp.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This interface handles the buttons on the physical tablet itself, including
the touch ring and the strip.
A notable difference to other libinput interfaces here is that we do not use
linux/input.h event codes for buttons. Instead, the buttons are merely
numbered sequentially, starting at button 1. This means:
* the API is different, instead of get_button() we have get_button_number() to
drive the point home
* there is no seat button count. pads are inherently different devices and
compositors should treat them as such. The seat button count makes sense
when you want to know how many devices have BTN_LEFT down, but it makes no
sense for buttons where all the semantics are handled by the compositor
anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
The newer Cintiqs have a minimum value of 400/400 advertised by the kernel but
the actual sensor goes past the 0/0 origin. Test this, make sure that a value
outside the boundaries generates negative mm values.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The Wacom tilt range is 64 degrees so we map everything into that until we
know otherwise.
This commit also switches the tilt axes around to align the angles with the
x/y orientation, i.e. tilting the top of the stylus towards the positive x
axis now generates a positive x tilt.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
There are a number of use-cases where tapping may be desirable, but
tap-and-drag is not, e.g. where tapping is used to select multiple items in a
list. Having tap-and-drag on hinders this, and the nature of the interaction
means it cannot be detected based on timeouts, movement thresholds, etc.
Provide an option instead to turn tap-an-drag off. Tap-and-drag remains
enabled by default (though tapping is disabled by default).
For the touchpad tap state diagram, the new option disables the transition
from state TOUCH to state TAPPED and releases the button immediately instead.
This means that multitap-and-drag is disabled too since we now just loop
around in the single-tap state for multitap.
It also makes tapping more responsive - we don't have to wait for the timeout
before we know whether it's a tap event. The first touch time is noted, we now
send the button press with the time of the first touch and the release with
the time of the release. This ensures a realistic time diff between the two
events.
https://bugs.freedesktop.org/show_bug.cgi?id=93502
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.netto>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Instead of an explicit tablet mode that device must be changed into, let the
caller decide which coordinates are preferred. The tablet mode may be
application-specific and usually depends on the tool as well.
This patch adds an interface to get a motion delta for the x/y axes in
pixel-like coordinates. libinput provides some magic to convert the tablet
data into something that resembles pixels from a mouse motion.
For unaccelerated relative motion, the caller should use the mm values from
the tablet and calculate deltas manually.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
There's no reason to prevent this for button events. Unlike the pointer
which is a relative device a tablet is (usually) a device with a lot of state.
Caller code that handles axes is likely shared between the various events,
treating button events separately here doesn't get us any benefit.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
When we're only dealing with BTN_TOUCH we can make the tip event independent
of the axis event. Now that we handle pressure thresholds to trigger tip state
this does not work, we'd have to send an axis event with the new pressure and
then a tip event. Since the pressure triggers the tip event this seems
disconnected.
Make the tip event officially capable of carrying axes. A caller can then
decide how to forward this to the next layer.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jason Gerecke <jason.gerecke@wacom.com>
Makes it even longer, but at least it's consistent with button and key state.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
For checking if a tablet tool can be uniquely identified by libinput. In
practice this means checking for a nonzero serial number, but let's not
restrict ourselves to allowing just that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Internally we still use it, at least for now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Part of the big revamp to get rid of libinput_tablet_tool_axis and
replace it with a set of axis-specific APIs.
Only the rel wheel has true delta events, everything else is a delta
calculated by libinput based on the previous position. Since we supply that
position to the callers anyway, they can determine that delta themselves
where needed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude <cpaul@redhat.com>
