Previously suspending a touch device with at least one touch down would never
release the touch point.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
If the touch is inactive the seat_slot is -1 and we filter the event. The same
happens for devices that send may touch events but aren't touch devices like
any touch-capable mouse. In those cases we sent a bunch of 'empty' touch frame
events. Stop this by checking if we actually flushed the respective event.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Rather than testing before if we have an event that matches the need for a
frame simply return the event sent by the flush function. If that event
matches those that need frame events, send the event then.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
No functional changes, this is prep work for being able to release touch
points on the fly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
The touchpad's says it can do two- and three-finger detection but it never
sends events for it. Disable them so we treat it as pure single-finger
touchpad.
https://bugzilla.redhat.com/show_bug.cgi?id=1351285
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Introduced in b02acd346b, we need to check the angle returned by the parsing
function, not the variable passed in.
Found by Coverity
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We leave the old LIBINPUT_MODEL_TRACKBALL in place until we can rely on
systems to have the new systemd tagging.
https://github.com/systemd/systemd/pull/3872
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The Logitech MX master has different click angles for the two wheels.
https://github.com/systemd/systemd/issues/3947
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The only places we should typecast from device->dispatch is where we have
external entry points. Everywhere else keep the pointer to the dispatch
interface we already have anyway.
This way we avoid papering over a potential re-use of a function from
non-evdev code, passing in the wrong dispatch.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is only used by the fallback dispatch method, not by any of the others.
Anything dispatch-specific should go into that struct.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rather than setting a magic device field and returning true/false just return
the dispatch method.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All these effectively returned bools anyway, switch the signature over to be
less ambiguous.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
These are internal functions, if we need them to return an error code we can
change that at any time. Meanwhile, if we only ever return 0 anyway we might
as well just make them voids to save on error paths.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
All Dell touchpas appear to have a visual marker on their touchpads. With a
visible marker our middle button can (and should) be much smaller since we
can rely on users to hit the button precisely.
https://bugs.freedesktop.org/show_bug.cgi?id=96710
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
To unify this we need to move the tagging process forward so tp_init() can
rely on it for config setup. This means moving it to the touchpad init code.
Other than that no real functional changes, the rules stay the same:
* serial/i2c/etc. are considered internal touchpads
* Bluetooth is always external
* USB is external for Logitech devices
* USB is external for Wacom devices
* USB is internal for Apple touchpads
And if we can't figure it out, we assume it's external and log a message so we
can put a quirk in place.
https://bugs.freedesktop.org/show_bug.cgi?id=96735
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The removal of the hysteresis even on precise touchpads has led to
difficulties controlling the cursor in a few instances. Since 27078b2667
we only have the hysteresis on Apple touchpads and the Lenovo *40 series and
later. Even on those do we see some positioning difficulties (bug 94379).
So restore the hysteresis by default again for all touchpads. In the future a
knob could be exposed for precision vs reactivity or something, but for now
the drawback of imprecise positioning does not outweigh the benefits we get
on those few devices.
https://bugs.freedesktop.org/show_bug.cgi?id=94379
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This device has a touchpad on the mouse but it's labeled as mouse. For litest
we only label it as LITEST_MOUSE feature and test the touchpad directly on the
device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
And change the various callers, especially those where we only had the
separate struct for indentation purposes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The hwdb doesn't allow unsetting a property so once we start nesting model
flags it'll become important to be able to be able to unset one as well (by
assigning it to 0).
So rather than checking for existence, check whether the property is actually
set to something resembling a boolean.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
A large part of the bugs seen right now are related to touchpads jittering too
much. Fixing them one by one is entertaining, but time consuming. Right now
the number of touchpads that require a hysteresis seem to outnumber those that
don't, so switch the approach around: leave the hysteresis in place but
disable it for those touchpads that don't need it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Was only used for the touchpad hysteresis, we can re-use the wobbly touchpad
tag for this.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Trackballs are effectively stationary devices and can be positioned at any
rotation. They are also employed by users with impaired dexterity which
sometimes implies that they are positioned at an non-default angle to make the
buttons easier to reach.
Add a config option for rotation for trackball devices. Currently only
supported for 90-degree angles, if there is a need we can add more angles
later.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Currently unused, but oh, the possibilities...
The only thing we have to go on for trackballs at the moment is whether they
have "Trackball" in the name string. All others need to be manually tagged.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Rather than a list where the only difference is the LIBINPUT_MODEL vs
EVDEV_MODEL prefix, use a macro.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
If a touchscreen has a fuzz value use it for motion hysteresis similar to how
we do it for a touchpad. This stops pointer wobbles as seen in
https://bugs.freedesktop.org/show_bug.cgi?id=94918
It's up to the system to override or set the kernel's fuzz value correctly,
i.e. a udev hwdb entry is required where the kernel driver does not set it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
If some elantech touchpads require a hysteresis, let's use some more generic
tag for those touchpads that require correct handling of pointer wobbles.
https://bugs.freedesktop.org/show_bug.cgi?id=94897
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Rather than checking the physical key's state, set a flag for the button to be
down. This enables us to use non-physical buttons (middle button emulation).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
