This gets more complicated for axes that aren't a 1:1 relationship with event
codes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
ABS_THROTTLE:
Tablets still advertise this axis but the mouse itself isn't available
anymore. The Pad sends the second wheel as ABS_THROTTLE but that's a
task for the buttonset interface. Explanation of what the throttle
did on page
http://101.wacom.com/productsupport/manual/Intuos2UsersManual.pdf
ABS_RX/ABS_RY:
These only happen on the Intuos3 device and only on the Pad device
(kernel >= 3.17)
ABS_RZ:
The 4D mouse for the Intuos2, obsolete.
No functional changes, this is to clarify why we're only handling a subset of
codes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
A tablet hotplug event is rare and not a time-critical event, so we load the
database on tablet init and throw it away again.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
I keep having to move them around after merging from master and often I'm late
with it too. It's a lot easier to just have to update the dependency in a
single line, and causes less conflicts too.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
The tool ID on wacom tablets is what really defines the tool, so one can
differ between say an Intuos Grip Pen, Art Pen or Classic Pen. They're all
BTN_TOOL_PEN in the kernel driver.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
It's a rough guide only, but still precise enough to make some decisions.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
There's no real reason to keep them in sync but it has drawbacks when we start
introducing tools that the kernel doesn't have (and can't easily add due to
range constraints).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
This is only used internally.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
We don't have real support for them yet but they have the ID_INPUT_TABLET tag
set. Ignore them explicitly before someone thinks they're already working.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-and-tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
If the device doesn't have any slots, mtdev->caps.slot.maximum is 0. Since we
only use mtdev if we don't have slots, this caused protocol A devices to
always fail.
https://bugs.freedesktop.org/show_bug.cgi?id=89211
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The two tp_get_*_touches_delta functions are almost identical, refactor
them into one function.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Only look at real touches when getting the average touches delta, otherwise
the touch used to populate the fake touches gets an unfair weighing factor.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Just moving some code around, no functional changes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Handle everything which is not handled by the tap, (soft)button or edge-scroll
code/statemachines in a unified way. Everything is treated as a X-finger
gesture now, and the action to take on finger movement is decided by
the gesture.finger_count setting. Pointer control now simply is seen as a
1 finger gesture, and 2fg scrolling as a 2fg gesture.
This removed the need for special-casing things like switching back to
pointer mode when lifting a finger in 2fg scrolling mode, and also lays the
groundwork for adding 3+ fg gesture support.
Note that 1 test-case needs to be updated to wait for the finger mode
switching when switching mode while a gesture has already been started.
This is actually an improvement as this stops sending spurious pointer
motion events at the end of 2fg scrolling when not lifting both fingers at
exactly the same time.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Add a tp_get_average_touches_delta helper function, and rename
tp_get_active_touches_delta to tp_get_combined_touches_delta to better
differentiate the two.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Not only stop 2fg scrolling, but also edge scrolling when the trackpoint
becomes active.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With the upcoming gesture support 2fg scrolling will be handled as part of
the main gesture state machine, whereas edge scrolling has its own state
machine, our current way of dispatching scroll "actions" does not play well
with this.
Change the scroll method handling to treat edge and 2fg scrolling as 2
separate state machines. The double scroll calls this introduces will mostly
be removed when the gesture handling code lands.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
When the tablet goes out of proximity we provide the last-known axis status
(which was sent in a previous axis event anyway), make sure the changed_axis
bitfield is unset for all axes though.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If the device disappears too quickly, the device is NULL, the sysname is NULL
and that causes a segfault in strcmp.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This constant isn't used in the public API, let's drop it. To make it easier
to use it internally and avoid accidental boolean comparisions with axes, bump
all real axes up to start at 1.
Internally that means we drop the AXIS_CNT since it'd be misleading and
instead use MAX or MAX + 1 everywhere.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Having a motion event that's sent right after the original proximity event just
to give the values of each axis is somewhat redundant. Since we already include
the values of each axis with each type of event, we may as well use the
proximity event to give the client the starting values for each axis on the
tablet.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There isn't much purpose in having proximity in and out as different events,
combining them into one single event is more consistent with the rest of the
API, and means less code for clients to have to work with.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is in reference to an issue I discovered during the GSoC where I found that
there is a grey area with the tablet tool and the tablet itself, where the
tablet will pick up the presence of a tool, but won't get any useful information
from it. When this happens, tablets have a habit of sending distance events with
incorrect values in them. As such, it's a good idea not to forward any axis
events from evdev until we know that the tool is within usable proximity.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
On the majority of Wacom tablets, the buttons are on the left side, opposite of
the side where the palm is meant to rest. Because of this, it's impossible to
use the tablet with your left hand (comfortably, anyway) unless you flip it
over, in which case the coordinates need to be inverted for it to match up with
the screen properly. This is where left handed mode comes in. When enabled, it
reverses all the coordinates so that the tablet may be rotated, and the palm
rest on the tablet moved over to the left side.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Bluetooth tablet devices' rules can't tag the event node directly, they can
only tag the first parent (the /sys/class/input/input1234 node). Check that
parent for tags too, lest we miss something important.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Store it as identifier in the device group, any two devices that have a
the same non-NULL identifier share the group.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We should be able to set the tablet to left-handed mode immediately when it's
connected to the system. Since left-handed mode won't activate until the tool is
out of proximity however, we have to make sure that upon initially connecting
the tablet, we set the tool to be out of proximity (it may as well be anyway,
since we haven't processed any proximity in events from evdev just yet)
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a device has multiple capabilities, has_button is imprecise. A device with
tablet and pointer capability for example may have BTN_LEFT on the pointer
interface but not on the tablet interface.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Added: udev-tag detection for the tablet.
libwacom assigns ID_INPUT_TABLET to all known devices but also
ID_INPUT_TOUCHPAD to all known devices with a touch interface. That's a bug
and should be fixed there but we can work around it by checking both and
making sure only one is set.
Conflicts:
src/evdev.c
test/misc.c
Use ID_INPUT_FOO to assume a device is a FOO, don't decide ourselves based on
whatever bits are available. This moves the categorization out to udev's
input_id builtin by default and other bits that tag the device. libwacom tags
all known devices as ID_INPUT_TABLET and (for touch-enabled ones)
ID_INPUT_TOUCH - we can re-use that knowledge then.
Ignore anything that doesn't have ID_INPUT set, this provides for an easy way
of making devices "invisible" to libinput.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
