In commit 9a9466b6a9 ("evdev: discard any frame with EV_SYN SYN_REPORT 1")
all frames with a SYN_REPORT 1 were discarded on the assumption of those
being key repeat frames. Unfortunately the kernel uses the same sequence
to simply mark *any* injected/emulated event, regardless of the cause. Key repeat
events are merely the most numerous ones but as shown in commit
7140f13d82 ("evdev: track KEY_SYSRQ frames and pass them even as repeat frames")
Alt+PrintScreen is also an emulated event.
Issue #1165 details another case: keyboards with n-key rollover can
exceed the kernel-internal event buffer, typically 8 events for devices
without EV_REL/EV_ABS. Those events will be broken up by the kernel into
multiple frames - once nevents == buffer_size the current state is
flushed as SYN_REPORT 1 frame. Then, if any more events are pending
those are flushed as SYN_REPORT 0 frame. In the case of exactly 8
events, the second frame is never present, so we cannot easily detect if
another one is coming.
Issue #1145 only affects us in the touchpad code, the rest of the
backends seem to (so far) be fine. So let's move the discarding of
SYN_REPORT 1 to the touchpad backend and leave the rest of the code
as-is.
This effectively
Reverts: 7140f13d82 ("evdev: track KEY_SYSRQ frames and pass them even as repeat frames")
Reverts: 9a9466b6a9 ("evdev: discard any frame with EV_SYN SYN_REPORT 1")
Closes#1165
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1282>
config.set10 is much more convenient and nicer to read but can provide
false positive if the value is 0 and #ifdef is used instead of #if. So
let's switch everything to use #ifdef instead, that way we cannot get
false positives if the value is unset.
Closes#1162
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1277>
Make sure we drop any potential high-resolution wheel events from a
device that isn't supposed to have them.
Where the device's axes were disabled due to a quirk, re-enabling the
axes means the device's events won't be filtered anymore. Our wheel
emulation plugin thus emulates high-resolution wheel events in addition
to the hardware events.
Fix this by simply filtering out any high-resolution wheel events on any
device that uses this plugin.
Closes#1160
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1279>
Same approach as chosen in libinput-record, this leaves the F1-F10 out
but otherwise prints every other "normal" key (including modifiers) as
KEY_A.
In the future we may need some more specific approach but for now this
will do. For the use-cases where we do need some specific approach,
libinput record and libinput debug-events will still show the full
keycode on request anyway.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1276>
Mixup of #if vs #ifdef caused this condition to always be treated as
true, resulting in leakage of key codes to the logs if the libinput log
level was set to debug.
Fixes: 7137eb9702 ("plugin: add ability to queue more events in the evdev_frame callback")
Closes#1163
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1276>
The plugin system prints all events before they're passed to the plugin
anyway and the special evdev plugin does not do anything but pass it on.
We can thus assume that the events passed to libinput are the same as
the ones passed to this plugin.
Let's do that and adjust the print format to be closer to what
evdev_log_debug() would print.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1276>
Our CI pipeline fails 9 times out of 10 on the valgrind tests. The tests
seem to finish in either 35 min or exceed the 60 min timeout limit, with
nothing in between. To avoid this let's split into more groups so we can
a) run those more in parallel and b) are less likely to hit the
timeout when run slowly.
Analysis of recent logs shows the eraser button tests to be the worst
offender, taking 752s (due to the combinatorial explosion) alone. The
various tip and proximity tests together also take some time so let's
group those out.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1274>
The vm tests had a 20 min timeout and a multiplier of 100. Our CI will
kill us (without logs) after 60 minutes.
Let's drop this to ~18min and a multiplier of 3 which gives us a few
minutes for setup before the CI terminates us. Ideally this means
we get some meson logs on timeout failures.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1274>
This is a leftover from the Lua plugin branch where the question of
whether to have public plugins before or after internal plugins is a
valid one. We don't have public plugins here, so let's remove this
fixme.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1269>
Fixes a regression causing missing scroll events on devices where the
kernel only sets REL_WHEEL/REL_HWHEEL but not the corresponding
hires events. On those devices we would get the legacy axis events but
no longer the new ones.
The mouse wheel plugin will correctly emulate missing hires events
but it doesn't attach to devices where the hires bit is never set.
This plugin can be very simple - since we know we enabled the code on
this device we don't need to keep any extra state around. If our frame
handler is called for this device we want to add the hi-res events.
Theoretically this breaks if the device has only one hi-res axis enabled
but not the other one (i.e. REL_WHEEL_HI_RES but only REL_HWHEEL) but
that's too theoretical to worry about.
Closes#1156
Fixes: 31854a829a ("plugin: only register the wheel plugin on devices that have a wheel")
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1268>
For mice with multipliers 30/120 and 40/120 nothing would change
as both will still cross threshold only after 2nd event.
But for MX Master 3 (and maybe others) that makes scroll beginning
a bit responsive, without jumping straight to 64/120 or 72/120.
Now events being emitted at 16+16+16 or 24+24 without significant
side-effects ("twitching" when resting finger on the wheel,
sudden scroll events when pressing middle button, etc). See !1262 for
some background.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1267>
The MX Master 3 is difficult, its wheel events are all over the place
and heuristics are tricky to determine. The previous plugin behavior
was seemingly sufficient for the MX Master but not for other devices.
Restore the old behavior if the quirk is set for a device by adding a
fourth state ALWAYS_ACCUMULATE. In this state the min movement is never
updated from the original threshold, causing any wheel motion to
accumulate.
Ref: ca6b82841c ("plugin/wheel: tighten the wheel debouncing code")
Ref: bb05e0d1b5 ("plugin/wheel: don't accumulate for low HID resolution multipliers")
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1262>
Accumulating (and partially discarding) scroll wheel events serves to
debounce a scroll wheel and provide for more fluid scrolling where
scroll wheels can send events going in the wrong direction.
This is unlikely to happen on devices with low resolution multipliers
(i.e. where some significant physical movement by the wheel is required
to trigger events) so let's make it contingent on devices more likely to
have flaky wheels.
The magic threshold picked is 30 (HID resolution multiplier of 4) as a
guess. The resolution multiplier isn't accessible in userspace so we
have to heuristically get to it - typical interaction with a mouse will
have that value set within the first two, three scroll wheel events
though.
Closes#1150
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1261>
The previous approach had a fixed threshold of 60 (half a detent)
below which scroll events were ignored. Reduce this threshold to have a
threshold of one device-specific delta. That threshold adjusts over time
to the device's individual minimum delta so after a few scroll event it
should settle on the lowest value possible.
The result is that fine-grained scrolling is possible on those devices
and only the very first scroll event is held back/swallowed, two events
in the same direction release scrolling.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1258>
