The test device initialization code was a bit of duplicated boilerplate and
required adding a reference to the devices to the 'devices' list in litest.c.
Automate this with a new TEST_DEVICE macro that adds the devices to a custom
section in the binary, then loops throught that section to get the device out.
This reduces the boilerplate for each test device to just the TEST_MACRO and
the LITEST_foo device enum entry. It also now automates the shortname of the
device.
The device's shortname was standardised in this approach as well, lowercase
and dashes only.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Avoid processing an event with a time later than the earliest timer expiry. If
libinput_dispatch() isn't called frequently enough, we may have e.g. a tap
timeout happening but read a subsequent input event first. In that case we can
erroneously trigger or miss out on taps, see wrong palm detection, etc.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Some devices like the UC Logic WP5540U has BTN_STYLUS but not BTN_TOOL_PEN.
While a kernel bug, let's just handle these correctly anyway.
https://bugs.freedesktop.org/show_bug.cgi?id=102570
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Yay-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Could be fixed in the kernel, but these tablets are effectively abandoned and
fixing them is a one-by-one issue. Let's put the infrastructure in place to
have this fixed once for this type of device and move on.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Yay-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Calculate the speed of the touch and compare it against a fixed speed limit.
If a touch exceeds the speed when a second touch is set down, that second
touch is marked as a thumb and ignored (unless it's right next to the other
finger, then it's likely a 2fg scroll).
The speed calculation is simple but has to lag behind by one sample - we reset
the motion history whenever a new finger is set down (to avoid pointer jumps)
so we need to know if the finger was moving fast *before* this happens. Plus,
with the pointer jumps we're more likely to get false positives if we
calculate the speed on actual finger down.
This is the simplest version for now, the speed varies greatly between
movements and should probably be averaged across the last 3-or-so samples.
https://bugs.freedesktop.org/show_bug.cgi?id=99703
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Devices tagged as accelerometers may also be other devices like tablet pads.
Only ignore pure accelerometer devices but disable the accelerometer axes for
devices that have multiple types.
https://bugs.freedesktop.org/show_bug.cgi?id=102100
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
The recommended way to have libinput ignore specific devices so far was to
remove the ID_INPUT* properties from the device. That may also affect other
pieces of the stack that need access to this device.
For the niche case of a device that should only be ignored by libinput but
otherwise be treated normally by the system, we now support the
LIBINPUT_IGNORE_DEVICE property.
If the property is set to "0", it's equivalent to being unset. This gets
around some technical limitations in udev where unsetting a property is
impossible via a hwdb entry.
https://bugs.freedesktop.org/show_bug.cgi?id=102229
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
And make it init the full litest device minus the libinput device. This
enables us to add litest devices that aren't handled by libinput.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The lid dispatch interface is a one-trick pony and can only handle SW_LID. It
ignores other switches but crashes on any event type other than EV_SW and
EV_SYN. Disable those types so we just ignore the event instead of asserting.
https://bugs.freedesktop.org/show_bug.cgi?id=101853
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Some devices have worn-out switches or just cheap switches that trigger
multiple button events for each press. These can be identified by unfeasably
short time deltas between the release and the next press event. In the
recordings I've seen so far, that timeout is 8ms.
We have a two-stage behavior: by default, we do not delay any events but we
monitor timestamps. The first time a bouncing button is detected we switch to
debounce mode. From then on, release events are delayed slightly to check for
subsequent button events. If one occurs, the releas and press are filtered. If
none occurs, the release event is passed to the caller.
https://bugs.freedesktop.org/show_bug.cgi?id=100057
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The max values on ABS_MT_TOUCH_MAJOR/MINOR aren't hard limits, they basically
represent the size of a finger with (afaict) a suggestion that anything
greater than the max may be a palm. Disable the 0-100% range checks for those
axes so we can send custom events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
check 0.11 has those macros, but they don't work the same way as our homemade
ones. So for now just #undef them
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Simplest implementation for what we need right now, it turns off an event on
the evdev device and turns it back on again. This allows us to change bits in
the 'normal' event stream, such as changing the tool type without triggering
proximity events for the BTN_TOOL_PEN that all test devices send by default.
This won't work for absolute devices because we need to re-enable with a
struct input_absinfo. But we don't need that ability for now anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We don't initialize click methods on devices with physical buttons. This model
is a special case, it's not a clickpad but it only has one button (because one
button is all you ever need and whatnot).
https://bugs.freedesktop.org/show_bug.cgi?id=99283
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
These tablets only ever give us a close event, the open event is broken. So
when we detect keyboard events, fix the kernel device's state by writing the
event to the fd.
We still sync the lid state manually, in case this fails and we don't get the
SW_LID through the normal event sequence. If it works fine, the real open
event will just be ignored.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Right now, we fail if we call litest_push_event_frame() when already inside a
frame. For the semi-mt handling we need to do exactly that though, so turn it
into a counting semaphore instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Ship a custom udev rule for the test device until systemd v333 is commonplace.
Signed-off-by: James Ye <jye836@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This requires to expand the blacklisting to be a bit more specific so we don't
initialize dwt config on devices that won't need it.
https://bugs.freedesktop.org/show_bug.cgi?id=99140
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We have one. Yay. Lucky us. Go forth and celebrate.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Not all mice have a click angle with integer degrees. The new
MOUSE_WHEEL_CLICK_COUNT property specifies how many clicks per full rotation,
the angle can be calculated from that.
See https://github.com/systemd/systemd/pull/4440 for more information
CLICK_COUNT overrides CLICK_ANGLE, so we check for the former first and then
fall back to the angle if need be. No changes to the user-facing API.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
That's where this device comes from. The x220 is special because it's too
small to trigger some of the features, eg. palm detection. Make this more
obvious by changing to a less generic name.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Touch sequences are interrupted by TOUCH_FRAME events which makes them
annoying to handle event-by-event.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
The udev hwdb takes about 200ms and we still trigger it on each device. The
udev rules don't actually change after compiling, so simply create them
once and remove them after the test run.
For multiple test binaries this needed to be synchronized (which is hard),
hence the previous merge into a single binary for all tests.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Call it a libinput-test-suite-runner, in subsequent patches we'll handle doing
parallel tests ourselves instead of relying on automake features.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Expose the middle button emulation on software buttons as proper config
option. When enabled, remove the middle button software button area.
https://bugs.freedesktop.org/show_bug.cgi?id=96663
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
