Slight disadvantage: this breaks Ctrl+C to cancel the test suite. Still
potentially better than injecting random events into your vt.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This guarantees the device rules have a static order between test runs.
Previously and in some cases, the temporary file name could affect the order
of the udev rules - let's not do that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When drawing on a tablet, the hand usually rests on the device, causing touch
events. The kernel arbitrates for us in most cases, so we get a touch up
and no events while the stylus is in proximity. When lifting the hand off in a
natural position, the hand still touches the device when the pen goes out of
proximity. This is 'immediately' followed by the hand lifting off the device.
When kernel pen/touch arbitration is active, the pen proximity out causes a
touch begin for the hand still on the pad. This is followed by a touch up when
the hand lifts which happens to look exactly like a tap-to-click.
Fix this by delaying the 'arbitration is now off' toggle, causing any touch
that starts immediately after proximity out to be detected as palm and
ignored for its lifetime.
https://bugs.freedesktop.org/show_bug.cgi?id=104985
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
So we don't have to have newline handling in the callers. This effectively
reverts 6ab2999be9 "test: detect linebreaks in log messages".
https://bugs.freedesktop.org/show_bug.cgi?id=104957
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Having the system suspend or shutdown halfway through a test run is a tad
annoying. So let's talk to logind and tell it to inhibit the various keys
we're testing.
https://bugs.freedesktop.org/show_bug.cgi?id=104720
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When running the test suite in full fork mode, the error messages are in the
quite verbose output and searching for them is annoying. Work around this by
opening a pipe to each subprocess and writing the failed test cases to that
pipe. When all tests have finished, print the messages to stdout. This way the
failures are always the last thing printed by the test suite.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
8cf6893 removed it to make search/replace easier, restore it for the tests
where we don't want debouncing to automatically be handled.
Still left in place are the various top software button cases. Because of the
button re-routing through the fallback interface we need those to be
debounced.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The current debouncing code monitors events and switches on when events are
too close together. From then on, any event can be delayed.
Vicente Bergas provided an algorithm that avoids most of these delays:
on a button state change we now forward the change without delay but start a
timer. If the button changes state during that timer, the changes are
ignored. On timer expiry, events are sent to match the hardware state
with the client's view of the device. This is only done if needed.
Thus, a press-release sequence of: PRP sends a single press event, a sequence of
PRPR sends press and then the release at the end of the timeout. The timeout
is short enough that the delay should not be noticeable.
This new mode is called the 'bounce' mode. The old mode is now referred to as
'spurious' mode and only covers the case of a button held down that loses
contact. It works as before, monitoring a button for these spurious contact
losses and switching on. When on, button release events are delayed as before.
The whole button debouncing moves to a state machine which makes debugging a
lot easier. See the accompanying SVG for the diagram.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is via a simple search & replace. Later auditing is needed to switch
clicks that should not be debounced (e.g. touchpads) back to a non-debounced
version.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Touchpads that require the hysteresis do not have filtering in the firmware
and holding a finger still causes continuous cursor movements. This implies
that we get a continuous stream of events with motion data.
If the finger is on the touchpad but we don't see any motion, the finger is
stationary and the touchpad firmware does filtering. In that case, we don't
need to add a hysteresis on top.
https://bugs.freedesktop.org/show_bug.cgi?id=98839
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Our own reference may be the last one that's still alive if the context is
currently suspended (litest_suspend()). If we unref before removing it from
the path interface, we access already freed memory.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
The test device initialization code was a bit of duplicated boilerplate and
required adding a reference to the devices to the 'devices' list in litest.c.
Automate this with a new TEST_DEVICE macro that adds the devices to a custom
section in the binary, then loops throught that section to get the device out.
This reduces the boilerplate for each test device to just the TEST_MACRO and
the LITEST_foo device enum entry. It also now automates the shortname of the
device.
The device's shortname was standardised in this approach as well, lowercase
and dashes only.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Avoid processing an event with a time later than the earliest timer expiry. If
libinput_dispatch() isn't called frequently enough, we may have e.g. a tap
timeout happening but read a subsequent input event first. In that case we can
erroneously trigger or miss out on taps, see wrong palm detection, etc.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Some devices like the UC Logic WP5540U has BTN_STYLUS but not BTN_TOOL_PEN.
While a kernel bug, let's just handle these correctly anyway.
https://bugs.freedesktop.org/show_bug.cgi?id=102570
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Yay-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Could be fixed in the kernel, but these tablets are effectively abandoned and
fixing them is a one-by-one issue. Let's put the infrastructure in place to
have this fixed once for this type of device and move on.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Yay-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Devices tagged as accelerometers may also be other devices like tablet pads.
Only ignore pure accelerometer devices but disable the accelerometer axes for
devices that have multiple types.
https://bugs.freedesktop.org/show_bug.cgi?id=102100
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
The recommended way to have libinput ignore specific devices so far was to
remove the ID_INPUT* properties from the device. That may also affect other
pieces of the stack that need access to this device.
For the niche case of a device that should only be ignored by libinput but
otherwise be treated normally by the system, we now support the
LIBINPUT_IGNORE_DEVICE property.
If the property is set to "0", it's equivalent to being unset. This gets
around some technical limitations in udev where unsetting a property is
impossible via a hwdb entry.
https://bugs.freedesktop.org/show_bug.cgi?id=102229
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
And make it init the full litest device minus the libinput device. This
enables us to add litest devices that aren't handled by libinput.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The lid dispatch interface is a one-trick pony and can only handle SW_LID. It
ignores other switches but crashes on any event type other than EV_SW and
EV_SYN. Disable those types so we just ignore the event instead of asserting.
https://bugs.freedesktop.org/show_bug.cgi?id=101853
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Some devices have worn-out switches or just cheap switches that trigger
multiple button events for each press. These can be identified by unfeasably
short time deltas between the release and the next press event. In the
recordings I've seen so far, that timeout is 8ms.
We have a two-stage behavior: by default, we do not delay any events but we
monitor timestamps. The first time a bouncing button is detected we switch to
debounce mode. From then on, release events are delayed slightly to check for
subsequent button events. If one occurs, the releas and press are filtered. If
none occurs, the release event is passed to the caller.
https://bugs.freedesktop.org/show_bug.cgi?id=100057
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no guarantee that libinput does the right thing if memory allocation
fails and it's such a niche case on the systems we're targeting that it just
doesn't matter. Simply abort if zalloc ever fails.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The max values on ABS_MT_TOUCH_MAJOR/MINOR aren't hard limits, they basically
represent the size of a finger with (afaict) a suggestion that anything
greater than the max may be a palm. Disable the 0-100% range checks for those
axes so we can send custom events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
