Fix various typos

Co-Authored-by: Claude Code <noreply@anthropic.com>
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1452>

doc/user/absolute-coordinate-ranges.rst

@@ -87,7 +87,7 @@ suggested hwdb entry. ::
 
 
 If there are discrepancies between the coordinate range the kernels
-advertises and what what the touchpad sends, the hwdb entry should be added to the
+advertises and what the touchpad sends, the hwdb entry should be added to the
 ``60-evdev.hwdb`` file provided by the `systemd project <https://github.com/systemd/systemd>`_.
 An example commit can be found
 `here <https://github.com/systemd/systemd/commit/26f667eac1c5e89b689aa0a1daef6a80f473e045>`_.

doc/user/architecture.rst

@@ -198,7 +198,7 @@ events is performed within the dispatch method.
 
       evdev [label="evdev_device_dispatch()"]
 
-      plugins [label="plugin pipline"]
+      plugins [label="plugin pipeline"]
 
       fallback [label="fallback_interface_process()"];
       touchpad [label="tp_interface_process()"]

doc/user/building.rst

@@ -13,7 +13,7 @@ Instructions on how to build libinput and its tools and how to build against
 libinput.
 
 The build instruction on this page detail how to overwrite your
-system-provided libinput with one from the git repository, see
+system-provided libinput with one from the git repository,
 see :ref:`reverting_install` to revert to the previous state.
 
 .. _distribution_repos:
@@ -27,7 +27,7 @@ the latest libinput without building it manually.
 
 .. note:: The list below is provided for convenience. The libinput community
    cannot provide any guarantees that the packages in those repositories are
-   correct, up-to-date and/or unmodified from the git branch. Due dilligence
+   correct, up-to-date and/or unmodified from the git branch. Due diligence
    is recommended.
 
 The following repositories provide an up-to-date package for libinput:

doc/user/button-debouncing.rst

@@ -30,7 +30,7 @@ The "bounce" method guarantees that all press events are delivered
 immediately and most release events are delivered immediately. The
 "spurious" method requires that release events are delayed, libinput thus
 does not enable this method unless a faulty event sequence is detected. A
-message is printed to the log when spurious deboucing was detected.
+message is printed to the log when spurious debouncing was detected.
 
 libinput's debouncing is supposed to correct hardware damage or
 substandard hardware. Debouncing also exists as an accessibility feature

doc/user/configuration.rst

@@ -47,7 +47,7 @@ for those devices it is expected to be implemented by the toolkit.
 Three-finger drag
 ------------------------------------------------------------------------------
 
-Three-finger drag allows emulates the mouse button down while three fingers
+Three-finger drag emulates the mouse button down while three fingers
 are down on a touchpad without the need to press a physical button or use
 :ref:`tapndrag`. See :ref:`drag_3fg` for details on how this feature works.
 
@@ -165,7 +165,7 @@ most touchpads.
 Disable while trackpointing
 ------------------------------------------------------------------------------
 
-DWTP is a form of palm detecion for devices that have a trackpoint (like
+DWTP is a form of palm detection for devices that have a trackpoint (like
 Thinkpads). While the user is using the trackpoint, the touchpad is disabled,
 being enabled again after a timeout. See :ref:`disable-while-trackpointing` for
 more info.

doc/user/device-quirks.rst

@@ -46,7 +46,7 @@ Installing temporary local device quirks
 
 The model quirks are part of the source distribution and should never be
 modified. For temporary local workarounds, libinput reads the
-``/etc/libinput/local-overrides.quirks`` file. Users may add a sections to
+``/etc/libinput/local-overrides.quirks`` file. Users may add sections to
 this file to add a device quirk for a local device but beware that **any
 modification must be upstreamed** or it may cease to work at any time.
 

doc/user/gestures.rst

@@ -99,7 +99,7 @@ Hold gestures have three potential logical states:
 - **begin**: one or more fingers are placed on the device at the same time
 - **end**: all fingers are removed and the device enters a neutral logical state
 - **end(cancelled)**: all fingers are part of a known interaction and the
-  currenthold gesture is no longer active. This may also occurs when
+  current hold gesture is no longer active. This may also occur when
   switching between hold gestures with different finger counts.
 
 .. note:: By definition, a hold gesture does not move and thus no coordinate
@@ -359,7 +359,7 @@ Touchpoints are assigned in sequential order and only the first two touch
 points are trackable. For libinput this produces an ambiguity where it is
 impossible to detect whether a gesture is a pinch gesture or a swipe gesture
 whenever a user puts the index and middle finger down first. Since the third
-finger does not have positional information, it's location cannot be
+finger does not have positional information, its location cannot be
 determined.
 
 .. figure:: gesture-2fg-ambiguity.svg

doc/user/palm-detection.rst

@@ -14,7 +14,7 @@ touch the bottom edges of the touchpad during normal interaction.
 
 Interference from a palm depends on the size of the touchpad and the position
 of the user's hand. Data from touchpads showed that almost all palm events
-during tying on a Lenovo T440 happened in the left-most and right-most 5% of
+during typing on a Lenovo T440 happened in the left-most and right-most 5% of
 the touchpad. The T440 series has one of the largest touchpads, other
 touchpads are less affected by palm touches.
 
@@ -52,7 +52,7 @@ Palm detection based on pressure
 
 The simplest form of palm detection labels a touch as palm when the pressure
 value goes above a certain threshold. This threshold is usually high enough
-that it cannot be triggered by a finger movement. One a touch is labelled as
+that it cannot be triggered by a finger movement. Once a touch is labelled as
 palm based on pressure, it will remain so even if the pressure drops below
 the threshold again. This ensures that a palm remains a palm even when the
 pressure changes as the user is typing.
@@ -187,7 +187,7 @@ Stylus-touch arbitration
 A special case of palm detection is touch arbitration on devices that
 support styli. When interacting with a stylus on the screen, parts of the
 hand may touch the surface and trigger touches. As the user is currently
-interacting with the stylus, these touches would interfer with the correct
+interacting with the stylus, these touches would interfere with the correct
 working of the stylus.
 
 libinput employs a method similar to :ref:`disable-while-typing` to detect

doc/user/pointer-acceleration.rst

@@ -39,7 +39,7 @@ Velocity calculation
 ------------------------------------------------------------------------------
 
 The device's speed of movement is measured across multiple input events
-through so-called "trackers". Each event prepends a the tracker item, each
+through so-called "trackers". Each event prepends a tracker item, each
 subsequent tracker contains the delta of that item to the current position,
 the timestamp of the event that created it and the cardinal direction of the
 movement at the time. If a device moves into the same direction, the

doc/user/reporting-bugs.rst

@@ -185,7 +185,7 @@ When you file a bug, please attach the following information:
 
 - a virtual description of your input device, see :ref:`libinput-record`.
   This is the most important piece of information, do not forget it!
-- the vendor model number of the device (e.g. "Sony Plastation3 controller")
+- the vendor model number of the device (e.g. "Sony PlayStation3 controller")
 
 .. _udev_info:
 
@@ -368,7 +368,7 @@ them.
   without someone stepping up to do the work. If you do see this tag, do ask
   for guidance on how to implement it.
 - **hw issue**: an issue that affects a specific device and is a hardware
-  bug, not a software bug. Often these needs to be worked around in libinput
+  bug, not a software bug. Often these need to be worked around in libinput
   but there are cases where a hw issue ends up as *cantfix*.
 - **janitor**: a cleanup task that does not substantially affect how
   libinput works. These are usually good bugs for newcomers to start on.
@@ -389,7 +389,7 @@ them.
   *cantfix*.
 - **wontfix**: this issue will not get fixed. This tag is usually assigned
   to feature requests that are outside the scope of libinput or would put an
-  unreasonable maintenance burdern on the maintainers.
+  unreasonable maintenance burden on the maintainers.
 
 These tags are high-level categories only, always look for the comments in
 the issue to get further details.

doc/user/tablet-support.rst

@@ -67,7 +67,7 @@ tools are capable of detecting 1 gram of pressure.
 
 libinput uses a device-specific pressure threshold to determine when the tip
 is considered logically down. As a result, libinput may send a nonzero
-pressure value while the tip is logically up. Most application can and
+pressure value while the tip is logically up. Most applications can and
 should ignore pressure information until they receive the event of type
 **LIBINPUT_EVENT_TABLET_TOOL_TIP**. Applications that require extremely
 fine-grained pressure sensitivity should use the pressure data instead of
@@ -284,7 +284,7 @@ with **libinput_tablet_tool_get_tool_id()** but makes no promises about the
 content or format of the ID.
 
 libinput currently supports Wacom-style tool IDs as provided on the Wacom
-Intuos 3, 4, 5, Wacon Cintiq and Wacom Intuos Pro series. The tool ID can
+Intuos 3, 4, 5, Wacom Cintiq and Wacom Intuos Pro series. The tool ID can
 be used to distinguish between e.g. a Wacom Classic Pen or a Wacom Pro Pen.
 It is  the caller's responsibility to interpret the tool ID.
 

doc/user/test-suite.rst

@@ -15,7 +15,7 @@ run to check for behavior changes and/or regressions. For quick iteration,
 the number of tests to run can be filtered, see :ref:`test-filtering`.
 This allows for developers to verify a subset of tests (e.g.
 touchpad tap-to-click) while hacking on that specific feature and only run
-the full suite when development is done finished.
+the full suite when development is finished.
 
 .. note:: The test suite relies on udev and the kernel, specifically uinput.
 	It creates virtual input devices and replays the events. This may
@@ -38,7 +38,7 @@ Job control in the test suite
 The test suite runner has a make-like job control enabled by the ``-j`` or
 ``--jobs`` flag and will fork off as many parallel processes as given by this
 flag. The default if unspecified is 8. When debugging a specific test case
-failure it is recommended to employ test filtures (see :ref:`test-filtering`)
+failure it is recommended to employ test filters (see :ref:`test-filtering`)
 and disable parallel tests. The test suite automatically disables parallel
 make when run in gdb.
 

doc/user/tools.rst

@@ -365,7 +365,7 @@ The ``libinput analyze`` tool is a multiplexer for various sub-tools that
 can analyze input events previously recorded from a device.
 
 Please see the **libinput-analyze(1)** man page for information about what
-tools are available and the man page for each respective too.
+tools are available and the man page for each respective tool.
 
 
 .. _libinput-quirks:

doc/user/touchpad-jitter.rst

@@ -8,7 +8,7 @@ Touchpad jitter describes random movement by a few pixels even when the
 user's finger is unmoving.
 
 libinput has a mechanism called a **hysteresis** to avoid that jitter. When
-active, movement with in the **hysteresis margin** is discarded. If the
+active, movement within the **hysteresis margin** is discarded. If the
 movement delta is larger than the margin, the movement is passed on as
 pointer movement. This is a simplified summary, developers should
 read the implementation of the hysteresis in ``src/evdev.c``.

doc/user/touchpad-pressure-debugging.rst

@@ -76,8 +76,8 @@ Example output of the tool is below: ::
 
 The example output shows five completed touch sequences and one ongoing one.
 For each, the respective minimum and maximum pressure values are printed as
-well as some statistics. The ``down`` column show that each sequence was
-considered logically down at some point (see the threholds in the last line),
+well as some statistics. The ``down`` column shows that each sequence was
+considered logically down at some point (see the thresholds in the last line),
 two of the sequences were considered thumbs. This is an interactive tool and
 its output may change frequently. Refer to the
 **libinput-measure-touchpad-pressure(1)** man page for more details.
@@ -112,7 +112,7 @@ Once the thresholds are decided on (e.g. 10 and 8), they can be enabled with
      AttrPalmPressureThreshold=150
      AttrThumbPressureThreshold=100
 
-The file name **must** be ``/etc/libinput/local-overrides.quirks``. The
+The file name **must** be ``/etc/libinput/local-overrides.quirks``.
 The first line is the section name and can be free-form. The ``Match``
 directives limit the quirk to your touchpad, make sure the device name
 matches your device's name (see ``libinput record``'s output). The dmi

doc/user/touchpad-pressure.rst

@@ -50,7 +50,7 @@ touchpads. Some devices can detect multiple fingers but only provide
 
 Some devices provide additional touch size information through
 the ``ABS_MT_TOUCH_MAJOR/ABS_MT_TOUCH_MINOR`` axes and/or
-the ``ABS_MT_WIDTH_MAJOR/ABS_MT_WIDTH_MINOR`` axes. These axes specifcy
+the ``ABS_MT_WIDTH_MAJOR/ABS_MT_WIDTH_MINOR`` axes. These axes specify
 the size of the touch ellipse. While the kernel documentation specifies how
 these axes are supposed to be mapped, few devices forward reliable
 information. libinput uses these values together with a device-specific

doc/user/touchpads.rst

@@ -25,7 +25,7 @@ Physically separate buttons
 
 Touchpads with physical buttons usually provide two buttons, left and right.
 A few touchpads with three buttons exist, and Apple used to have touchpads
-with a single physical buttons until ca 2008. Touchpads with only two
+with a single physical button until ca 2008. Touchpads with only two
 buttons require the software stack to emulate a middle button. libinput does
 this when both buttons are pressed simultaneously.
 

doc/user/trackpoints.rst

@@ -25,7 +25,7 @@ Button scrolling on trackpoints
 ------------------------------------------------------------------------------
 
 Trackpoint devices have :ref:`button_scrolling` enabled by default. This may
-interfer with middle-button dragging, if middle-button dragging is required
+interfere with middle-button dragging, if middle-button dragging is required
 by a user then button scrolling must be disabled.
 
 .. _trackpoint_range:

doc/user/wheel-api.rst

@@ -77,7 +77,7 @@ wheel:
 | 20          |      20    | 1             | 120  |
 +-------------+------------+---------------+------+
 
-Fast scrolling may trigger cover than one detent per event and thus each
+Fast scrolling may trigger more than one detent per event and thus each
 event may contain multiples of the value, discrete or v120 value:
 
 +-------------+------------+---------------+------+

src/evdev-mt-touchpad.c

@@ -333,7 +333,7 @@ tp_new_touch(struct tp_dispatch *tp, struct tp_touch *t, usec_t time)
 	   again. That's a kernel bug, so let's complain. */
 	if (t->state == TOUCH_MAYBE_END) {
 		evdev_log_bug_kernel(tp->device,
-				     "touch %d ended and began in in same frame.\n",
+				     "touch %d ended and began in same frame.\n",
 				     t->index);
 		tp->nfingers_down++;
 		t->state = TOUCH_UPDATE;
@@ -1335,7 +1335,7 @@ tp_position_fake_touches(struct tp_dispatch *tp)
 		return;
 
 	/* We have at least one fake touch down. Find the top-most real
-	 * touch and copy its coordinates over to to all fake touches.
+	 * touch and copy its coordinates over to all fake touches.
 	 * This is more reliable than just taking the first touch.
 	 */
 	for (i = 0; i < tp->num_slots; i++) {

src/evdev-tablet.c

@@ -178,7 +178,7 @@ tablet_filter_axis_fuzz(const struct tablet_dispatch *tablet,
 
 	fuzz = libevdev_get_abs_fuzz(device->evdev, evdev_usage_code(e->usage));
 
-	/* ABS_DISTANCE doesn't have have fuzz set and causes continuous
+	/* ABS_DISTANCE doesn't have fuzz set and causes continuous
 	 * updates for the cursor/lens tools. Add a minimum fuzz of 2, same
 	 * as the xf86-input-wacom driver
 	 */
@@ -2465,7 +2465,7 @@ tablet_setup_touch_arbitration(struct evdev_device *device,
 		struct libinput_device_group *group2 =
 			libinput_device_get_device_group(&new_device->base);
 
-		/* same phsical device? -> better, otherwise keep the one we have */
+		/* same physical device? -> better, otherwise keep the one we have */
 		if (group1 != group2)
 			return;
 

src/evdev.c

@@ -1361,7 +1361,7 @@ evdev_read_wheel_click_count_prop(struct evdev_device *device,
 
 	evdev_log_error(device,
 			"mouse wheel click count is present but invalid, "
-			"using %d degrees for angle instead instead\n",
+			"using %d degrees for angle instead\n",
 			DEFAULT_WHEEL_CLICK_ANGLE);
 	*angle = DEFAULT_WHEEL_CLICK_ANGLE;
 

src/libinput-plugin.h

@@ -230,7 +230,7 @@ libinput_plugin_enable_evdev_usage(struct libinput_plugin *plugin,
  * for P3 the injected event I is received before E.
  *
  * An example for event injection being harmful:
- * A plugin may monitor tablet proximity state and prepent
+ * A plugin may monitor tablet proximity state and prepend
  * proximity-in events if the tablet does not send proximity-in
  * events. This plugin stops monitoring events once it sees correct
  * proximity-in events.
@@ -279,7 +279,7 @@ libinput_plugin_inject_evdev_frame(struct libinput_plugin *libinput,
  *
  * If called within a plugin's timer callback, any frames generated by
  * the plugin will only be seen by plugins after this plugin. These
- * frames will be processed in the usual evdev_fame() callback and there
+ * frames will be processed in the usual evdev_frame() callback and there
  * is no indication that the events were queued from within a timer
  * callback. Using the above example:
  *

src/libinput.h

@@ -348,7 +348,7 @@ enum libinput_tablet_pad_strip_axis_source {
  * LIBINPUT_TABLET_TOOL_TYPE_PEN.
  * Use libinput_tablet_tool_get_tool_id() to get a specific model where applicable.
  *
- * Note that on some device, the eraser tool is on the tail end of a pen
+ * Note that on some devices, the eraser tool is on the tail end of a pen
  * device. On other devices, e.g. MS Surface 3, the eraser is the pen tip
  * while a button is held down.
  *
@@ -730,7 +730,7 @@ enum libinput_switch {
 	 * If the switch is in state @ref LIBINPUT_SWITCH_STATE_OFF, the
 	 * device is in laptop mode. If the switch is in state @ref
 	 * LIBINPUT_SWITCH_STATE_ON, the device is in tablet mode and the
-	 * keyboard or touchpad may not be  accessible.
+	 * keyboard or touchpad may not be accessible.
 	 *
 	 * It is up to the caller to identify which devices are inaccessible
 	 * in tablet mode.
@@ -828,7 +828,7 @@ enum libinput_event_type {
 	LIBINPUT_EVENT_POINTER_AXIS,
 
 	/**
-	 * A scroll event from a wheel. This event is sent is sent **in
+	 * A scroll event from a wheel. This event is sent **in
 	 * addition** to the @ref LIBINPUT_EVENT_POINTER_AXIS
 	 * event for all events with a
 	 * libinput_event_pointer_get_axis_source() of @ref
@@ -843,7 +843,7 @@ enum libinput_event_type {
 
 	/**
 	 * A scroll event caused by the movement of one or more fingers on a
-	 * device. This event is sent is sent **in addition** to the @ref
+	 * device. This event is sent **in addition** to the @ref
 	 * LIBINPUT_EVENT_POINTER_AXIS event for all events with a
 	 * libinput_event_pointer_get_axis_source() of @ref
 	 * LIBINPUT_POINTER_AXIS_SOURCE_FINGER. Ignore @ref
@@ -857,7 +857,7 @@ enum libinput_event_type {
 
 	/**
 	 * A scroll event from a continuous scroll source, e.g. button
-	 * scrolling. This event is sent is sent **in
+	 * scrolling. This event is sent **in
 	 * addition** to the @ref LIBINPUT_EVENT_POINTER_AXIS
 	 * event for all events with a
 	 * libinput_event_pointer_get_axis_source() of @ref
@@ -2423,7 +2423,7 @@ libinput_event_tablet_tool_wheel_has_changed(struct libinput_event_tablet_tool *
  * width of the device. See the libinput documentation for more details.
  *
  * @param event The libinput tablet tool event
- * @return The current value of the the axis
+ * @return The current value of the axis
  *
  * @since 1.2
  */
@@ -2446,7 +2446,7 @@ libinput_event_tablet_tool_get_x(struct libinput_event_tablet_tool *event);
  * width of the device. See the libinput documentation for more details.
  *
  * @param event The libinput tablet tool event
- * @return The current value of the the axis
+ * @return The current value of the axis
  *
  * @since 1.2
  */
@@ -2500,7 +2500,7 @@ libinput_event_tablet_tool_get_dy(struct libinput_event_tablet_tool *event);
  * If this axis does not exist on the current tool, this function returns 0.
  *
  * @param event The libinput tablet tool event
- * @return The current value of the the axis
+ * @return The current value of the axis
  *
  * @since 1.2
  */
@@ -2516,7 +2516,7 @@ libinput_event_tablet_tool_get_pressure(struct libinput_event_tablet_tool *event
  * If this axis does not exist on the current tool, this function returns 0.
  *
  * @param event The libinput tablet tool event
- * @return The current value of the the axis
+ * @return The current value of the axis
  *
  * @since 1.2
  */
@@ -2556,7 +2556,7 @@ libinput_event_tablet_tool_get_tilt_x(struct libinput_event_tablet_tool *event);
  * If this axis does not exist on the current tool, this function returns 0.
  *
  * @param event The libinput tablet tool event
- * @return The current value of the the axis in degrees
+ * @return The current value of the axis in degrees
  *
  * @since 1.2
  */
@@ -2578,7 +2578,7 @@ libinput_event_tablet_tool_get_tilt_y(struct libinput_event_tablet_tool *event);
  * If this axis does not exist on the current tool, this function returns 0.
  *
  * @param event The libinput tablet tool event
- * @return The current value of the the axis
+ * @return The current value of the axis
  *
  * @since 1.2
  */
@@ -2596,7 +2596,7 @@ libinput_event_tablet_tool_get_rotation(struct libinput_event_tablet_tool *event
  * If this axis does not exist on the current tool, this function returns 0.
  *
  * @param event The libinput tablet tool event
- * @return The current value of the the axis
+ * @return The current value of the axis
  *
  * @since 1.2
  */
@@ -2630,7 +2630,7 @@ libinput_event_tablet_tool_get_size_major(struct libinput_event_tablet_tool *eve
  * rotation must be taken into account.
  *
  * Where no rotation is available on a tool, or where rotation is zero, the
- * minor axis aligns with the y axis and the minor axis with the x axis.
+ * major axis aligns with the y axis and the minor axis with the x axis.
  *
  * If this axis does not exist on the current tool, this function returns 0.
  *
@@ -2823,10 +2823,10 @@ libinput_event_tablet_tool_get_button_state(struct libinput_event_tablet_tool *e
  * @ingroup event_tablet
  *
  * For the button of a @ref LIBINPUT_EVENT_TABLET_TOOL_BUTTON event, return the total
- * number of buttons pressed on all devices on the associated seat after the
+ * number of buttons pressed on all devices on the associated seat after
  * the event was triggered.
  *
- " @note It is an application bug to call this function for events other than
+ * @note It is an application bug to call this function for events other than
  * @ref LIBINPUT_EVENT_TABLET_TOOL_BUTTON. For other events, this function returns 0.
  *
  * @param event The libinput tablet tool event
@@ -3205,7 +3205,7 @@ libinput_event_tablet_pad_get_base_event(struct libinput_event_tablet_pad *event
  * returns 0.
  *
  * @param event The libinput tablet pad event
- * @return The current value of the the axis
+ * @return The current value of the axis
  * @retval -1 The finger was lifted
  *
  * @since 1.3
@@ -3259,8 +3259,8 @@ libinput_event_tablet_pad_get_ring_source(struct libinput_event_tablet_pad *even
  * logical orientation.
  *
  * If the source is @ref LIBINPUT_TABLET_PAD_STRIP_SOURCE_FINGER,
- * libinput sends a terminating event with a ring value of -1 when the
- * finger is lifted from the ring. A caller may use this information to e.g.
+ * libinput sends a terminating event with a strip value of -1 when the
+ * finger is lifted from the strip. A caller may use this information to e.g.
  * determine if kinetic scrolling should be triggered.
  *
  * @note It is an application bug to call this function for events other than
@@ -3268,7 +3268,7 @@ libinput_event_tablet_pad_get_ring_source(struct libinput_event_tablet_pad *even
  * returns 0.
  *
  * @param event The libinput tablet pad event
- * @return The current value of the the axis
+ * @return The current value of the axis
  * @retval -1 The finger was lifted
  *
  * @since 1.3
@@ -3404,7 +3404,7 @@ libinput_event_tablet_pad_get_key_state(struct libinput_event_tablet_pad *event)
  * returns 0.
  *
  * @param event The libinput tablet pad event
- * @return The delta of the the axis
+ * @return The delta of the axis
  *
  * @since 1.26
  */
@@ -3529,7 +3529,7 @@ libinput_event_tablet_pad_get_time_usec(struct libinput_event_tablet_pad *event)
  * @ingroup event_switch
  *
  * Return the switch that triggered this event.
- * For pointer events that are not of type @ref
+ * For switch events that are not of type @ref
  * LIBINPUT_EVENT_SWITCH_TOGGLE, this function returns 0.
  *
  * @note It is an application bug to call this function for events other than
@@ -3665,7 +3665,7 @@ libinput_udev_create_context(const struct libinput_interface *interface,
  * available on this seat, or if devices are available but fail to open in
  * @ref libinput_interface::open_restricted. Devices that do not have the
  * minimum capabilities to be recognized as pointer, keyboard or touch
- * device are ignored. Such devices and those that failed to open
+ * device are ignored. Such devices and those that failed to open are
  * ignored until the next call to libinput_resume().
  *
  * This function may only be called once per context.
@@ -3762,7 +3762,7 @@ libinput_path_remove_device(struct libinput_device *device);
  * Paths are not traversed recursively.
  *
  * Plugins that have a 0 byte size shadow any plugins with the same name
- * but do not provide any fuctionality. This allows disabling a plugin
+ * but do not provide any functionality. This allows disabling a plugin
  * by simply dropping an empty file in a higher-priority directory.
  *
  * This function must be called before libinput_plugin_system_load_plugins().
@@ -5838,7 +5838,7 @@ libinput_device_config_accel_apply(struct libinput_device *device,
  * types (e.g. scrolling) may be added in the future.
  *
  * The special type @ref LIBINPUT_ACCEL_TYPE_FALLBACK specifies the acceleration
- * function to be moved for any movement produced by the device that does not
+ * function to be used for any movement produced by the device that does not
  * have a specific acceleration type defined.
  *
  * Use to specify the acceleration function type in
@@ -5879,7 +5879,7 @@ enum libinput_config_accel_type {
  *
  * Each custom acceleration function is defined by ``n`` points spaced uniformly
  * along the x-axis starting from 0 and continuing in a constant step size.
- * There by the function is defined by the following points:
+ * Thereby the function is defined by the following points:
  * (0 * step, f[0]), (1 * step, f[1]), ..., ((n - 1) * step, f[n - 1]).
  * The x-axis represents the device-speed in device units per millisecond.
  * The y-axis represents the pointer-speed.
@@ -7099,7 +7099,7 @@ libinput_device_config_rotation_get_default_angle(struct libinput_device *device
  * Check if a tablet tool can have a custom pressure range.
  *
  * @param tool The libinput tool
- * @return Non-zero if a device has an adjustible pressure range, zero otherwise.
+ * @return Non-zero if a device has an adjustable pressure range, zero otherwise.
  *
  * @see libinput_tablet_tool_config_pressure_range_set
  * @see libinput_tablet_tool_config_pressure_range_get_minimum

src/util-bits.h

@@ -43,7 +43,7 @@
 #define NLONGS(x) (((x) + LONG_BITS - 1) / LONG_BITS)
 #define NCHARS(x) ((size_t)(((x) + 7) / 8))
 
-/* This bitfield helper implementation is taken from from libevdev-util.h,
+/* This bitfield helper implementation is taken from libevdev-util.h,
  * except that it has been modified to work with arrays of unsigned chars
  */
 

src/util-files.c

@@ -48,8 +48,8 @@ file_destroy(struct file *f)
 DEFINE_DESTROY_CLEANUP_FUNC(file);
 
 /**
- * Appends to the given list all files files in the given directory that end
- * with the given with the given suffix.
+ * Appends to the given list all files in the given directory that end
+ * with the given suffix.
  */
 static void
 filenames(const char *directory, const char *suffix, struct list *list)

src/util-stringbuf.h

@@ -121,7 +121,7 @@ stringbuf_ensure_space(struct stringbuf *b, size_t sz)
 }
 
 /**
- * Append the the data from the fd to the string buffer.
+ * Append the data from the fd to the string buffer.
  */
 static inline int
 stringbuf_append_from_fd(struct stringbuf *b, int fd, size_t maxlen)

tools/libinput-debug-events.man

@@ -21,7 +21,7 @@ This tool usually needs to be run as root to have access to the
 .SH OPTIONS
 .TP 8
 .B \-\-compress\-motion\-events
-Compress repeated motion, axis, scrool, and gesture update
+Compress repeated motion, axis, scroll, and gesture update
 events into a single line. This only takes effect if stdout is a TTY.
 .TP 8
 .B \-\-device \fI/dev/input/event0\fR

tools/libinput-debug-gui.man

@@ -52,7 +52,7 @@ light grey to help debug cusor positioning. The cursor movement is
 the one as seen by libinput and may not match the cursor movement of the
 display server.
 .PP
-The unaccelerated cusor motion is displayed as a grey upside-down triangle.
+The unaccelerated cursor motion is displayed as a grey upside-down triangle.
 The movement of this cursor typically reflects the relative motion in device
 units and can differ significantly to the normal cursor movement.
 .PP

tools/libinput-record.man

@@ -233,7 +233,7 @@ A dictionary with libinput-specific information.
 A dictionary with system information.
 .TP 8
 .B devices: {...}
-A list of devices containing the description and and events of each device.
+A list of devices containing the description and events of each device.
 
 .SS libinput
 .TP 8

tools/libinput-replay.man

@@ -24,7 +24,7 @@ Replay the recording after waiting for s seconds. This replaces the default
 interactive prompt to start the replay.
 .SH NOTES
 .PP
-This tool replays events from a recording through the the kernel and is
+This tool replays events from a recording through the kernel and is
 independent of libinput. In other words, updating or otherwise changing
 libinput will not alter the output from this tool. libinput itself does not
 need to be in use to replay events.

tools/libinput-test.man

@@ -30,7 +30,7 @@ Run the
 This is the most complete set of tests to run in libinput.
 .TP 8
 .B utils
-Run the test suite suite for internal utility functions.
+Run the test suite for internal utility functions.
 .SH LIBINPUT
 Part of the
 .B libinput(1)