libinput/src/evdev-mt-touchpad.h

242 lines
5.8 KiB
C
Raw Normal View History

/*
* Copyright © 2014 Red Hat, Inc.
*
* Permission to use, copy, modify, distribute, and sell this software and
* its documentation for any purpose is hereby granted without fee, provided
* that the above copyright notice appear in all copies and that both that
* copyright notice and this permission notice appear in supporting
* documentation, and that the name of the copyright holders not be used in
* advertising or publicity pertaining to distribution of the software
* without specific, written prior permission. The copyright holders make
* no representations about the suitability of this software for any
* purpose. It is provided "as is" without express or implied warranty.
*
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
* SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
* FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
* SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
* RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
* CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef EVDEV_MT_TOUCHPAD_H
#define EVDEV_MT_TOUCHPAD_H
#include <stdbool.h>
#include "evdev.h"
#include "filter.h"
#define TOUCHPAD_HISTORY_LENGTH 4
#define TOUCHPAD_MIN_SAMPLES 4
enum touchpad_event {
TOUCHPAD_EVENT_NONE = 0,
TOUCHPAD_EVENT_MOTION = (1 << 0),
TOUCHPAD_EVENT_BUTTON_PRESS = (1 << 1),
TOUCHPAD_EVENT_BUTTON_RELEASE = (1 << 2),
};
enum touch_state {
TOUCH_NONE = 0,
TOUCH_BEGIN,
TOUCH_UPDATE,
TOUCH_END
};
touchpad: Add clickpad-style software buttons Almost all non Apple touchpads have visible markings for software button areas, so limit clickfinger behavior to Apple clickpads, and implement software button areas for others. This is a slightly fancier implementation than the simplest model and ported over from libtouchpad. It implements a state machine for the software buttons with left and right buttons currently implemented. Buttons are oriented left-to-right, in a horizontal bar. No random button placement allowed. In general, the procedure is: - if a finger sets down in the left button area, a click is a left click - if a finger sets down in the right button area, a click is a right click - if a finger leaves the button area, a click is a left click - if a finger starts outside the button area, a click is a left click Two timeouts are used to handle buttons more smoothly: - if a finger sets down in a button area but "immediately" moves over to a different area, that area takes effect on a click. - if a finger leaves a button area and "immediately" clicks or moves back into the area, the button still takes effect on a click. - if a finger changes between areas and stays there for a timeout, that area takes effect on a click. Note the button area states are named BOTTOM_foo to make it easier to later add support for a top button area such as can be found on the Thinkpad [2-5]40 series. Co-authored-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jonas Ådahl <jadahl@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2014-03-28 09:44:11 +10:00
enum button_event {
BUTTON_EVENT_IN_BOTTOM_R = 30,
BUTTON_EVENT_IN_BOTTOM_L,
BUTTON_EVENT_IN_AREA,
BUTTON_EVENT_UP,
BUTTON_EVENT_PRESS,
BUTTON_EVENT_RELEASE,
BUTTON_EVENT_TIMEOUT,
};
enum button_state {
BUTTON_STATE_NONE,
BUTTON_STATE_AREA,
BUTTON_STATE_BOTTOM,
BUTTON_STATE_BOTTOM_NEW,
BUTTON_STATE_BOTTOM_TO_AREA,
};
enum scroll_state {
SCROLL_STATE_NONE,
SCROLL_STATE_SCROLLING
};
enum tp_tap_state {
TAP_STATE_IDLE = 4,
TAP_STATE_TOUCH,
TAP_STATE_HOLD,
TAP_STATE_TAPPED,
TAP_STATE_TOUCH_2,
TAP_STATE_TOUCH_2_HOLD,
TAP_STATE_TOUCH_3,
TAP_STATE_TOUCH_3_HOLD,
TAP_STATE_DRAGGING_OR_DOUBLETAP,
TAP_STATE_DRAGGING,
TAP_STATE_DRAGGING_WAIT,
TAP_STATE_DRAGGING_2,
TAP_STATE_DEAD, /**< finger count exceeded */
};
struct tp_motion {
int32_t x;
int32_t y;
};
struct tp_touch {
enum touch_state state;
bool dirty;
bool fake; /* a fake touch */
bool is_pointer; /* the pointer-controlling touch */
int32_t x;
int32_t y;
uint64_t millis;
struct {
struct tp_motion samples[TOUCHPAD_HISTORY_LENGTH];
unsigned int index;
unsigned int count;
} history;
struct {
int32_t center_x;
int32_t center_y;
} hysteresis;
/* A pinned touchpoint is the one that pressed the physical button
* on a clickpad. After the release, it won't move until the center
* moves more than a threshold away from the original coordinates
*/
struct {
bool is_pinned;
int32_t center_x;
int32_t center_y;
} pinned;
touchpad: Add clickpad-style software buttons Almost all non Apple touchpads have visible markings for software button areas, so limit clickfinger behavior to Apple clickpads, and implement software button areas for others. This is a slightly fancier implementation than the simplest model and ported over from libtouchpad. It implements a state machine for the software buttons with left and right buttons currently implemented. Buttons are oriented left-to-right, in a horizontal bar. No random button placement allowed. In general, the procedure is: - if a finger sets down in the left button area, a click is a left click - if a finger sets down in the right button area, a click is a right click - if a finger leaves the button area, a click is a left click - if a finger starts outside the button area, a click is a left click Two timeouts are used to handle buttons more smoothly: - if a finger sets down in a button area but "immediately" moves over to a different area, that area takes effect on a click. - if a finger leaves a button area and "immediately" clicks or moves back into the area, the button still takes effect on a click. - if a finger changes between areas and stays there for a timeout, that area takes effect on a click. Note the button area states are named BOTTOM_foo to make it easier to later add support for a top button area such as can be found on the Thinkpad [2-5]40 series. Co-authored-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jonas Ådahl <jadahl@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2014-03-28 09:44:11 +10:00
/* Software-button state and timeout if applicable */
struct {
enum button_state state;
/* We use button_event here so we can use == on events */
enum button_event curr;
uint64_t timeout;
touchpad: Add clickpad-style software buttons Almost all non Apple touchpads have visible markings for software button areas, so limit clickfinger behavior to Apple clickpads, and implement software button areas for others. This is a slightly fancier implementation than the simplest model and ported over from libtouchpad. It implements a state machine for the software buttons with left and right buttons currently implemented. Buttons are oriented left-to-right, in a horizontal bar. No random button placement allowed. In general, the procedure is: - if a finger sets down in the left button area, a click is a left click - if a finger sets down in the right button area, a click is a right click - if a finger leaves the button area, a click is a left click - if a finger starts outside the button area, a click is a left click Two timeouts are used to handle buttons more smoothly: - if a finger sets down in a button area but "immediately" moves over to a different area, that area takes effect on a click. - if a finger leaves a button area and "immediately" clicks or moves back into the area, the button still takes effect on a click. - if a finger changes between areas and stays there for a timeout, that area takes effect on a click. Note the button area states are named BOTTOM_foo to make it easier to later add support for a top button area such as can be found on the Thinkpad [2-5]40 series. Co-authored-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jonas Ådahl <jadahl@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2014-03-28 09:44:11 +10:00
} button;
};
struct tp_dispatch {
struct evdev_dispatch base;
struct evdev_device *device;
unsigned int nfingers_down; /* number of fingers down */
unsigned int slot; /* current slot */
bool has_mt;
unsigned int ntouches; /* number of slots */
struct tp_touch *touches; /* len == ntouches */
unsigned int fake_touches; /* fake touch mask */
struct {
int32_t margin_x;
int32_t margin_y;
} hysteresis;
struct motion_filter *filter;
struct {
double constant_factor;
double min_factor;
double max_factor;
double x_scale_coeff;
double y_scale_coeff;
} accel;
struct {
bool is_clickpad; /* true for clickpads */
touchpad: Add clickpad-style software buttons Almost all non Apple touchpads have visible markings for software button areas, so limit clickfinger behavior to Apple clickpads, and implement software button areas for others. This is a slightly fancier implementation than the simplest model and ported over from libtouchpad. It implements a state machine for the software buttons with left and right buttons currently implemented. Buttons are oriented left-to-right, in a horizontal bar. No random button placement allowed. In general, the procedure is: - if a finger sets down in the left button area, a click is a left click - if a finger sets down in the right button area, a click is a right click - if a finger leaves the button area, a click is a left click - if a finger starts outside the button area, a click is a left click Two timeouts are used to handle buttons more smoothly: - if a finger sets down in a button area but "immediately" moves over to a different area, that area takes effect on a click. - if a finger leaves a button area and "immediately" clicks or moves back into the area, the button still takes effect on a click. - if a finger changes between areas and stays there for a timeout, that area takes effect on a click. Note the button area states are named BOTTOM_foo to make it easier to later add support for a top button area such as can be found on the Thinkpad [2-5]40 series. Co-authored-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jonas Ådahl <jadahl@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2014-03-28 09:44:11 +10:00
bool use_clickfinger; /* number of fingers decides button number */
touchpad: softbuttons: Deal with a click arriving before any touches It is possible for a click to get reported before any related touch events get reported, here is the relevant part of an evemu-record session on a T440s: E: 3.985585 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- E: 3.997419 0003 0039 -001 # EV_ABS / ABS_MT_TRACKING_ID -1 E: 3.997419 0001 014a 0000 # EV_KEY / BTN_TOUCH 0 E: 3.997419 0003 0018 0000 # EV_ABS / ABS_PRESSURE 0 E: 3.997419 0001 0145 0000 # EV_KEY / BTN_TOOL_FINGER 0 E: 3.997419 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- E: 5.117881 0001 0110 0001 # EV_KEY / BTN_LEFT 1 E: 5.117881 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- E: 5.133422 0003 0039 0187 # EV_ABS / ABS_MT_TRACKING_ID 187 E: 5.133422 0003 0035 3098 # EV_ABS / ABS_MT_POSITION_X 3098 E: 5.133422 0003 0036 3282 # EV_ABS / ABS_MT_POSITION_Y 3282 E: 5.133422 0003 003a 0046 # EV_ABS / ABS_MT_PRESSURE 46 E: 5.133422 0001 014a 0001 # EV_KEY / BTN_TOUCH 1 E: 5.133422 0003 0000 3102 # EV_ABS / ABS_X 3102 E: 5.133422 0003 0001 3282 # EV_ABS / ABS_Y 3282 E: 5.133422 0003 0018 0046 # EV_ABS / ABS_PRESSURE 46 E: 5.133422 0001 0145 0001 # EV_KEY / BTN_TOOL_FINGER 1 E: 5.133422 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- Notice the BTN_LEFT event all by itself! To deal with this if a physical click registers before we get any touches, wait for the first touch to resolve the click. Also see the new activity diagram for the tp_post_softbutton_buttons method which has been added to doc/touchpad-softbutton-state-machine.svg Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2014-04-07 16:49:36 +02:00
bool click_pending;
uint32_t state;
uint32_t old_state;
uint32_t motion_dist; /* for pinned touches */
unsigned int active; /* currently active button, for release event */
touchpad: Add clickpad-style software buttons Almost all non Apple touchpads have visible markings for software button areas, so limit clickfinger behavior to Apple clickpads, and implement software button areas for others. This is a slightly fancier implementation than the simplest model and ported over from libtouchpad. It implements a state machine for the software buttons with left and right buttons currently implemented. Buttons are oriented left-to-right, in a horizontal bar. No random button placement allowed. In general, the procedure is: - if a finger sets down in the left button area, a click is a left click - if a finger sets down in the right button area, a click is a right click - if a finger leaves the button area, a click is a left click - if a finger starts outside the button area, a click is a left click Two timeouts are used to handle buttons more smoothly: - if a finger sets down in a button area but "immediately" moves over to a different area, that area takes effect on a click. - if a finger leaves a button area and "immediately" clicks or moves back into the area, the button still takes effect on a click. - if a finger changes between areas and stays there for a timeout, that area takes effect on a click. Note the button area states are named BOTTOM_foo to make it easier to later add support for a top button area such as can be found on the Thinkpad [2-5]40 series. Co-authored-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jonas Ådahl <jadahl@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2014-03-28 09:44:11 +10:00
/* Only used for clickpads. The software button area is always
touchpad: Add clickpad-style software buttons Almost all non Apple touchpads have visible markings for software button areas, so limit clickfinger behavior to Apple clickpads, and implement software button areas for others. This is a slightly fancier implementation than the simplest model and ported over from libtouchpad. It implements a state machine for the software buttons with left and right buttons currently implemented. Buttons are oriented left-to-right, in a horizontal bar. No random button placement allowed. In general, the procedure is: - if a finger sets down in the left button area, a click is a left click - if a finger sets down in the right button area, a click is a right click - if a finger leaves the button area, a click is a left click - if a finger starts outside the button area, a click is a left click Two timeouts are used to handle buttons more smoothly: - if a finger sets down in a button area but "immediately" moves over to a different area, that area takes effect on a click. - if a finger leaves a button area and "immediately" clicks or moves back into the area, the button still takes effect on a click. - if a finger changes between areas and stays there for a timeout, that area takes effect on a click. Note the button area states are named BOTTOM_foo to make it easier to later add support for a top button area such as can be found on the Thinkpad [2-5]40 series. Co-authored-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jonas Ådahl <jadahl@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2014-03-28 09:44:11 +10:00
* a horizontal strip across the touchpad. Depending on the
* rightbutton_left_edge value, the buttons are split according to the
* edge settings.
*/
touchpad: Add clickpad-style software buttons Almost all non Apple touchpads have visible markings for software button areas, so limit clickfinger behavior to Apple clickpads, and implement software button areas for others. This is a slightly fancier implementation than the simplest model and ported over from libtouchpad. It implements a state machine for the software buttons with left and right buttons currently implemented. Buttons are oriented left-to-right, in a horizontal bar. No random button placement allowed. In general, the procedure is: - if a finger sets down in the left button area, a click is a left click - if a finger sets down in the right button area, a click is a right click - if a finger leaves the button area, a click is a left click - if a finger starts outside the button area, a click is a left click Two timeouts are used to handle buttons more smoothly: - if a finger sets down in a button area but "immediately" moves over to a different area, that area takes effect on a click. - if a finger leaves a button area and "immediately" clicks or moves back into the area, the button still takes effect on a click. - if a finger changes between areas and stays there for a timeout, that area takes effect on a click. Note the button area states are named BOTTOM_foo to make it easier to later add support for a top button area such as can be found on the Thinkpad [2-5]40 series. Co-authored-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jonas Ådahl <jadahl@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2014-03-28 09:44:11 +10:00
struct {
int32_t top_edge;
int32_t rightbutton_left_edge;
} bottom_area;
touchpad: Add clickpad-style software buttons Almost all non Apple touchpads have visible markings for software button areas, so limit clickfinger behavior to Apple clickpads, and implement software button areas for others. This is a slightly fancier implementation than the simplest model and ported over from libtouchpad. It implements a state machine for the software buttons with left and right buttons currently implemented. Buttons are oriented left-to-right, in a horizontal bar. No random button placement allowed. In general, the procedure is: - if a finger sets down in the left button area, a click is a left click - if a finger sets down in the right button area, a click is a right click - if a finger leaves the button area, a click is a left click - if a finger starts outside the button area, a click is a left click Two timeouts are used to handle buttons more smoothly: - if a finger sets down in a button area but "immediately" moves over to a different area, that area takes effect on a click. - if a finger leaves a button area and "immediately" clicks or moves back into the area, the button still takes effect on a click. - if a finger changes between areas and stays there for a timeout, that area takes effect on a click. Note the button area states are named BOTTOM_foo to make it easier to later add support for a top button area such as can be found on the Thinkpad [2-5]40 series. Co-authored-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jonas Ådahl <jadahl@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2014-03-28 09:44:11 +10:00
unsigned int timeout; /* current timeout in ms */
int timer_fd;
struct libinput_source *source;
} buttons; /* physical buttons */
struct {
enum scroll_state state;
enum libinput_pointer_axis direction;
} scroll;
enum touchpad_event queued;
struct {
bool enabled;
int timer_fd;
struct libinput_source *source;
unsigned int timeout;
enum tp_tap_state state;
} tap;
};
#define tp_for_each_touch(_tp, _t) \
for (unsigned int _i = 0; _i < (_tp)->ntouches && (_t = &(_tp)->touches[_i]); _i++)
void
tp_get_delta(struct tp_touch *t, double *dx, double *dy);
void
tp_set_pointer(struct tp_dispatch *tp, struct tp_touch *t);
int
tp_tap_handle_state(struct tp_dispatch *tp, uint64_t time);
unsigned int
tp_tap_handle_timeout(struct tp_dispatch *tp, uint64_t time);
int
tp_init_tap(struct tp_dispatch *tp);
void
tp_destroy_tap(struct tp_dispatch *tp);
int
tp_init_buttons(struct tp_dispatch *tp, struct evdev_device *device);
touchpad: Add clickpad-style software buttons Almost all non Apple touchpads have visible markings for software button areas, so limit clickfinger behavior to Apple clickpads, and implement software button areas for others. This is a slightly fancier implementation than the simplest model and ported over from libtouchpad. It implements a state machine for the software buttons with left and right buttons currently implemented. Buttons are oriented left-to-right, in a horizontal bar. No random button placement allowed. In general, the procedure is: - if a finger sets down in the left button area, a click is a left click - if a finger sets down in the right button area, a click is a right click - if a finger leaves the button area, a click is a left click - if a finger starts outside the button area, a click is a left click Two timeouts are used to handle buttons more smoothly: - if a finger sets down in a button area but "immediately" moves over to a different area, that area takes effect on a click. - if a finger leaves a button area and "immediately" clicks or moves back into the area, the button still takes effect on a click. - if a finger changes between areas and stays there for a timeout, that area takes effect on a click. Note the button area states are named BOTTOM_foo to make it easier to later add support for a top button area such as can be found on the Thinkpad [2-5]40 series. Co-authored-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jonas Ådahl <jadahl@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2014-03-28 09:44:11 +10:00
void
tp_destroy_buttons(struct tp_dispatch *tp);
int
tp_process_button(struct tp_dispatch *tp,
const struct input_event *e,
uint64_t time);
int
tp_post_button_events(struct tp_dispatch *tp, uint64_t time);
touchpad: Add clickpad-style software buttons Almost all non Apple touchpads have visible markings for software button areas, so limit clickfinger behavior to Apple clickpads, and implement software button areas for others. This is a slightly fancier implementation than the simplest model and ported over from libtouchpad. It implements a state machine for the software buttons with left and right buttons currently implemented. Buttons are oriented left-to-right, in a horizontal bar. No random button placement allowed. In general, the procedure is: - if a finger sets down in the left button area, a click is a left click - if a finger sets down in the right button area, a click is a right click - if a finger leaves the button area, a click is a left click - if a finger starts outside the button area, a click is a left click Two timeouts are used to handle buttons more smoothly: - if a finger sets down in a button area but "immediately" moves over to a different area, that area takes effect on a click. - if a finger leaves a button area and "immediately" clicks or moves back into the area, the button still takes effect on a click. - if a finger changes between areas and stays there for a timeout, that area takes effect on a click. Note the button area states are named BOTTOM_foo to make it easier to later add support for a top button area such as can be found on the Thinkpad [2-5]40 series. Co-authored-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jonas Ådahl <jadahl@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2014-03-28 09:44:11 +10:00
int
tp_button_handle_state(struct tp_dispatch *tp, uint64_t time);
touchpad: Add clickpad-style software buttons Almost all non Apple touchpads have visible markings for software button areas, so limit clickfinger behavior to Apple clickpads, and implement software button areas for others. This is a slightly fancier implementation than the simplest model and ported over from libtouchpad. It implements a state machine for the software buttons with left and right buttons currently implemented. Buttons are oriented left-to-right, in a horizontal bar. No random button placement allowed. In general, the procedure is: - if a finger sets down in the left button area, a click is a left click - if a finger sets down in the right button area, a click is a right click - if a finger leaves the button area, a click is a left click - if a finger starts outside the button area, a click is a left click Two timeouts are used to handle buttons more smoothly: - if a finger sets down in a button area but "immediately" moves over to a different area, that area takes effect on a click. - if a finger leaves a button area and "immediately" clicks or moves back into the area, the button still takes effect on a click. - if a finger changes between areas and stays there for a timeout, that area takes effect on a click. Note the button area states are named BOTTOM_foo to make it easier to later add support for a top button area such as can be found on the Thinkpad [2-5]40 series. Co-authored-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jonas Ådahl <jadahl@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2014-03-28 09:44:11 +10:00
int
tp_button_touch_active(struct tp_dispatch *tp, struct tp_touch *t);
#endif