libinput/doc/faqs.dox

/**
@page faq FAQs - Frequently Asked Questions

Frequently asked questions about libinput.

@tableofcontents

@section faq_feature Why doesn't libinput support ...?

First, read @ref what_is_libinput If you have a feature that you think
libinput needs to support, please file a bug report. See @ref reporting_bugs
for more details.

@section faq_fast_mouse My mouse moves too fast, even at the slowest setting

This is a symptom of high-dpi mice (greater than 1000dpi). These devices
need a udev hwdb entry to normalize their motion. See @ref
motion_normalization for a detailed explanation.

@section faq_enable_tapping Why isn't touchpad tap-to-click enabled by default

See @ref tapping_default

@section faq_touchpad_pressure Why does my touchpad lose track of touches

The most common cause for this is an incorrect pressure threshold range.
See @ref touchpad_pressure for more info.

@section faq_kinetic_scrolling Kinetic scrolling does not work

The X.Org synaptics driver implemented kinetic scrolling in the driver. It
measures the scroll speed and once the finger leaves the touchpad the driver
keeps sending scroll events for a predetermined time. This effectively
provides for kinetic scrolling without client support but triggers an
unfixable [bug](https://bugs.freedesktop.org/show_bug.cgi?id=38909): the
client cannot know that the events are from a kinetic scroll source. Scroll
events in X are always sent to the current cursor position, a movement of the
cursor after lifting the finger will send the kinetic scroll events to the
new client, something the user does not usually expect. A key event during
the kinetic scroll procedure causes side-effects such as triggering zoom.

libinput does not implement kinetic scrolling for touchpads. Instead it
provides the libinput_event_pointer_get_axis_source() function that enables
callers to implement kinetic scrolling on a per-widget basis, see @ref
scroll_sources.

@section faq_gpl Is libinput GPL-licensed?

No, libinput is MIT licensed. The Linux kernel header file linux/input.h in
libinput's tree is provided to ensure the same behavior regardless of which
kernel version libinput is built on. It does not make libinput GPL-licensed.

@section faq_config_options Where is the configuration stored?

libinput does not store configuration options, it is up to the caller to
manage these and decide which configuration option to apply to each device.
This must be done at startup, after a resume and whenever a new device is
detected.

One commonly used way to configure libinput is to have the Wayland
compositor expose a compositor-specific configuration option. For example,
in a GNOME stack, the gnome-control-center modifies dconf entries. These
changes are read by mutter and applied to libinput. Changing these entries
via the gsettings commandline tool has the same effect.

Another commonly used way to configure libinput is to have xorg.conf.d
snippets. When libinput is used with the xf86-input-libinput driver in an
X.Org stack, these options are read on startup and apply to each device.
Changing properties at runtime with the xinput commandline tool has the same
effect.

In both cases, the selection of available options and how they are exposed
depends on the libinput caller (e.g. mutter or xf86-input-libinput).

@dotfile libinput-stack-gnome.gv

This has an effect on the availability of configuration options: if an
option is not exposed by the intermediary, it cannot be configured by the
client. Also some configuration options that are provided by the
intermediary may not be libinput-specific configuration options.

@section faq_configure_wayland How do I configure my device on Wayland?

See @ref faq_config_options Use the configuration tool provided by your
desktop environment (e.g. gnome-control-center) or direct access to your
desktop environment's configuration storage (e.g. gsettings).

@section faq_configure_xorg How do I configure my device on X?

See @ref faq_config_options  If your desktop environment does not provide a
graphical configuration tool you can use an
<a href="https://www.x.org/archive/current/doc/man/man5/xorg.conf.5.xhtml">xorg.conf.d snippet</a>.
Usually, such a snippet looks like this:
<pre>
$> cat /etc/X11/xorg.conf.d/99-libinput-custom-config.conf
Section "InputClass"
  Identifier "something to identify this snippet"
  MatchDriver "libinput"
  MatchProduct "substring of the device name"
  Option "some option name" "the option value"
EndSection
</pre>

The identifier is merely a human-readable string that shows up in the log
file. The MatchProduct line should contain the device name or a substring of
the device name that the snippet should apply to. For a full list of option
names and permitted values, see the
<a href="https://www.mankier.com/4/libinput">libinput man page</a>.
xorg.conf.d snippets like the above apply to hotplugged devices but can be
overwritten at runtime by desktop tools. Multiple snippets may be placed
into the same file.

For run-time configuration and testing, the
<a href="https://www.x.org/archive/X11R7.5/doc/man/man1/xinput.1.html">xinput</a>
debugging tool can modify a devices' properties. See the
<a href="https://www.mankier.com/4/libinput">libinput man page</a>
for supported property names and values. Usually, an invocation looks like
this:
<pre>
$> xinput set-prop "the device name" "the property name" value [value2] [value3]
</pre>

@note
Changes performed by xinput do not persist across device hotplugs. xinput is
considered a debugging and testing tool only and should not be used for
permanent configurations.

@section faq_synclient Why don't synclient and syndaemon work with libinput?

Synclient and syndaemon rely on X input device properties that are specific
to the xf86-input-synaptics X.Org input driver. Both were written when the
synaptics driver was the only commmon touchpad driver in existence. They
assume that if the properties aren't available, no touchpad is available
either. The xf86-input-libinput X.Org input driver does not export these
driver-specific properties, synclient/syndaemon will thus not detect the
touchpad and refuse to work. Other tools that rely on synclient/syndaemon or
those same properties also do not work with xf86-input-libinput.

Most of syndaemon's functionality is built into libinput, see @ref
disable-while-typing. synclient is merely a configuration tool, see
@ref faq_configure_xorg for similar functionality.

See also the blog posts
<a
href="http://who-t.blogspot.com.au/2017/01/the-definitive-guide-to-synclient.html">The
definitive guide to synclient</a> and
<a href="http://who-t.blogspot.com.au/2016/12/the-future-of-xinput-xmodmap-setxkbmap.html">
The future of xinput, xmodmap, setxkbmap, xsetwacom and other tools under
Wayland</a>

@section faq_tablets Does libinput support non-Wacom tablets?

Yes, though unfortunately many non-Wacom tablets suffer from bad firmware
and don't send the required events. But they should all work nonetheless. If
you have a tablet that does not work with libinput, please @ref
reporting_bugs "file a bug".

@section faq_tablet_capabilities My tablet doesn't work

If you see the message
<pre>
libinput bug: device does not meet tablet criteria. Ignoring this device.
</pre>

or the message
<pre>
missing tablet capabilities [...] Ignoring this device.
</pre>

your tablet device does not have the required capabilities to be treated as
a tablet. This is usually a problem with the device and the kernel driver.
See @ref tablet-capabilities for more details.

@section faq_hwdb_changes How to apply hwdb changes

Sometimes users are asked to test updates to the <a
href="https://www.freedesktop.org/software/systemd/man/hwdb.html">udev
hwdb</a> or patches that include a change to the hwdb.

If you are testing a patch with a hwdb update, the file will be installed
in the correct location. User-specific (i.e. user-written) hwdb entries for
testing and debugging must be in `/etc/udev/hwdb.d/99-filename.hwdb`. You
may rename the `filename` portion to something more useful, but make sure
you keep the `.hwdb` suffix. Do not modify files or save files in
`/usr/lib/udev/hwdb.d`.

Figure out the event node name of your device. Run `sudo evemu-describe`
with no arguments to get a list. If your device is `/dev/input/event4`,
your event node name is `event4` and you will need to replace that in the
commands below.

Rebuild the hwdb and load the new set on your device:

    sudo udevadm hwdb --update
    sudo udevadm trigger /sys/class/input/eventX
    sudo udevadm test /sys/class/input/eventX

With the event node matching your device. Make sure the udev property
appears (or does not appear, whichever applies) in the output of the test
command.

Once the output matches expectations, restart X or your Wayland
compositor or reboot.

*/