include: sync event codes with kernel 5.7

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>

include/linux/input-event-codes.h

@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
 /*
  * Input event codes
  *
@@ -649,6 +649,86 @@
  */
 #define KEY_DATA			0x277
 #define KEY_ONSCREEN_KEYBOARD		0x278
+/* Electronic privacy screen control */
+#define KEY_PRIVACY_SCREEN_TOGGLE	0x279
+
+/* Select an area of screen to be copied */
+#define KEY_SELECTIVE_SCREENSHOT	0x27a
+
+/*
+ * Some keyboards have keys which do not have a defined meaning, these keys
+ * are intended to be programmed / bound to macros by the user. For most
+ * keyboards with these macro-keys the key-sequence to inject, or action to
+ * take, is all handled by software on the host side. So from the kernel's
+ * point of view these are just normal keys.
+ *
+ * The KEY_MACRO# codes below are intended for such keys, which may be labeled
+ * e.g. G1-G18, or S1 - S30. The KEY_MACRO# codes MUST NOT be used for keys
+ * where the marking on the key does indicate a defined meaning / purpose.
+ *
+ * The KEY_MACRO# codes MUST also NOT be used as fallback for when no existing
+ * KEY_FOO define matches the marking / purpose. In this case a new KEY_FOO
+ * define MUST be added.
+ */
+#define KEY_MACRO1			0x290
+#define KEY_MACRO2			0x291
+#define KEY_MACRO3			0x292
+#define KEY_MACRO4			0x293
+#define KEY_MACRO5			0x294
+#define KEY_MACRO6			0x295
+#define KEY_MACRO7			0x296
+#define KEY_MACRO8			0x297
+#define KEY_MACRO9			0x298
+#define KEY_MACRO10			0x299
+#define KEY_MACRO11			0x29a
+#define KEY_MACRO12			0x29b
+#define KEY_MACRO13			0x29c
+#define KEY_MACRO14			0x29d
+#define KEY_MACRO15			0x29e
+#define KEY_MACRO16			0x29f
+#define KEY_MACRO17			0x2a0
+#define KEY_MACRO18			0x2a1
+#define KEY_MACRO19			0x2a2
+#define KEY_MACRO20			0x2a3
+#define KEY_MACRO21			0x2a4
+#define KEY_MACRO22			0x2a5
+#define KEY_MACRO23			0x2a6
+#define KEY_MACRO24			0x2a7
+#define KEY_MACRO25			0x2a8
+#define KEY_MACRO26			0x2a9
+#define KEY_MACRO27			0x2aa
+#define KEY_MACRO28			0x2ab
+#define KEY_MACRO29			0x2ac
+#define KEY_MACRO30			0x2ad
+
+/*
+ * Some keyboards with the macro-keys described above have some extra keys
+ * for controlling the host-side software responsible for the macro handling:
+ * -A macro recording start/stop key. Note that not all keyboards which emit
+ *  KEY_MACRO_RECORD_START will also emit KEY_MACRO_RECORD_STOP if
+ *  KEY_MACRO_RECORD_STOP is not advertised, then KEY_MACRO_RECORD_START
+ *  should be interpreted as a recording start/stop toggle;
+ * -Keys for switching between different macro (pre)sets, either a key for
+ *  cycling through the configured presets or keys to directly select a preset.
+ */
+#define KEY_MACRO_RECORD_START		0x2b0
+#define KEY_MACRO_RECORD_STOP		0x2b1
+#define KEY_MACRO_PRESET_CYCLE		0x2b2
+#define KEY_MACRO_PRESET1		0x2b3
+#define KEY_MACRO_PRESET2		0x2b4
+#define KEY_MACRO_PRESET3		0x2b5
+
+/*
+ * Some keyboards have a buildin LCD panel where the contents are controlled
+ * by the host. Often these have a number of keys directly below the LCD
+ * intended for controlling a menu shown on the LCD. These keys often don't
+ * have any labeling so we just name them KEY_KBD_LCD_MENU#
+ */
+#define KEY_KBD_LCD_MENU1		0x2b8
+#define KEY_KBD_LCD_MENU2		0x2b9
+#define KEY_KBD_LCD_MENU3		0x2ba
+#define KEY_KBD_LCD_MENU4		0x2bb
+#define KEY_KBD_LCD_MENU5		0x2bc
 
 #define BTN_TRIGGER_HAPPY		0x2c0
 #define BTN_TRIGGER_HAPPY1		0x2c0
@@ -782,6 +862,7 @@
 #define ABS_MT_TOOL_X		0x3c	/* Center X tool position */
 #define ABS_MT_TOOL_Y		0x3d	/* Center Y tool position */
 
+
 #define ABS_MAX			0x3f
 #define ABS_CNT			(ABS_MAX+1)
 

include/linux/input.h

@@ -32,6 +32,7 @@ struct input_event {
 	__kernel_ulong_t __sec;
 #if defined(__sparc__) && defined(__arch64__)
 	unsigned int __usec;
+	unsigned int __pad;
 #else
 	__kernel_ulong_t __usec;
 #endif