Approximately every user of libei(s) will want something like this for
easier debugging, converting the numeric event type into something that
can be printed into the debug logs.
Let's provide this here so this doesn't need to be duplicated.
In one place, `$XDG_RUNTIME` was referenced. Which is wrong since the
variable is called `$XDG_RUNTIME_DIR`. The other uses referred to
`XDG_RUNTIME`, which could be taken as a shorthand, but it's clearer to
just use the name of the variable.
Binding single capabilities is allowed but our device handling expects
the devices to be "complete". So if we bind to pointer only, the demo
server creates a pointer-only device and then fails at sending buttons.
And move it to the start of the loop so we print the current timestamp
followed by processing the incoming events (if any). These events thus
should have timestamps less than now.
Same as the corresponding ei change a few commits ago, this one does all
the EIS renaming in the same manner.
As with the libei changes, an EIS implementation must now handle the
EIS_DEVICE_CAP_BUTTON and EI_DEVICE_CAP_SCROLL capabilities. In
virtually all cases, clients will likely expect that a device with the
pointer or absolute pointer capabilities will also have button and
scroll capabilities.
Now that the protocol interfaces are more fine-grained, let's match this
with the C API too.
This is just a rename of things so that in general
ei_pointer_*foo now becomes ei_foo*.
A few notable renames for better readability here:
- ei_device_scroll_delta (because scroll_scroll is awkward)
- ei_event_scroll_get_dx/dy and
ei_event_scroll_get_discrete_dx/dy to indicate the delta-ness
Beyond that, clients must ensure to check/bind to the new
EI_DEVICE_CAP_BUTTON and EI_DEVICE_CAP_SCROLL capabilities to be able
to send button or scroll events.
Note that this API now allows for an EIS implementation to send a device
that only has a button or a scroll cap. Or a pointer cap without
buttons, etc. It's up to the clients how to handle such devices
(probably: ignore them).
`memfd_create` doesn't seem to be supported on
all platforms (e.g. ubuntu 18 has trouble with it).
Even though, I was able to substitute `memfd_create`
with a direct system call, I was not able to get
the `MFD_CLOXEC` flag (from fcntl.h) working cleanly
(there were redefinitions/conflicts for other
structures when trying to use <linux/*> headers).
Making it optional for time being till we have
figured out how to make it work broadly.
The default log handler logs to stderr, but we want stdout here to have
it intermixed with our real log messages (easier to debug this way).
Would probably be better to have this somewhere shared but for now this
will do.
This makes it easier to correlate a particular input transaction
(whether there are events or not) with out-of-band information like the
planned portal InputCapture::Activated signal's "activation-id".
The primary use-case for these properties in libei itself was to send
some fixed information (pid, cmdline and conection type). In the portal
case, these can be obtained out-of-band via the portal. In the
non-portal case these can be obtained from the socket itself (fetch pid,
look up /proc/pid/cmdline) which is just as reliable as trusting
whatever libei sends.
The only other use-case for the properties was the activation id in the
InputCapture::Activated portal signal. This can be achieved with a
serial in the START_EMULATING event.
libei used to have direct portal support code (see the git history) but:
- that code was a custom proposed portal that never went anywhere
- libei has slowly changed to be more an input event transport layer since
it is now also used sending events *to* a libei context
- a number of libei users will never need the DBus code, either because they
don't want it or because they talk Dbus themselves na ddon't need this
abstraction.
Luckily, it's quite easy to move this into a separate library with a
simple API that does, effectively, the same trick as the old portal backend.
This API is aiming to be as simple as possible because the tools that
require anything more complex should talk to DBus directly.
An example tool that uses the API to retrieve an EIS fd over the
RemoteDesktop portal is included in this patch.
"Öffis" is a German word meaning public transport. It also sounds like the
French Œuf, the word for egg.
Co-authored-by: Olivier Fourdan <ofourdan@redhat.com>
The original idea here was that we would have an EmulatedInput portal
that allows the application to connect directly to the EIS
implementation to exchange input events - instead of ping-ponging DBus
events through the xdg-desktop-portal as the RemoteDesktop portal
requires.
This is no longer accurate, there are suggested PRs open to add
RemoteDesktop.ConnectToEIS to achieve the same through the existing
RemoteDesktop interface [1] and to add a new InputCapture portal
to allow for events to be sent to a libei receiver context [2].
The example EmulatedInput portal is thus superfluous and can be removed
from here.
We could switch the ei_setup_backend_portal() code to use RemoteDesktop
or InputCapture, depending on the context type, the utility of this is
questionable. Interaction with portals is complex, one needs to
implement the Session/Request interfaces correctly and in the case of
InputCapture also handle the complex zones/pointer barrier setup.
libportal does some of this (or it will, anyway) so it's more useful for
an application to use libportal and then just pass the received fd to
libei.
If there is a future need for this to be handled as part of libei, we
can (re)implement this, but for now it's best to just purge all of this.
[1] https://github.com/flatpak/xdg-desktop-portal/pull/762
[2] https://github.com/flatpak/xdg-desktop-portal/pull/714
The demo client has an inner while loop for the events, followed by
the code to send events to the server. Skip that code if our while loop
indicated we'll stop.
Currently only implemented for frame events, the vague plan for the
future is to merely queue the device events internally and "release"
them once a frame event was received, retrofitting the timestamp to the
C event struct (i.e. making ei_event_get_time() available on all device
events).
Meanwhile, the frame event it is.
Prints out a YAML-compatible list of events for debugging.
This tool also takes a --socketfd argument which names the fd number
that the EIS connection is on. This allows the tool to be started from
some other process that does the EIS connection, e.g. a portal
implementation.
Previously, a client could only bind to a capability immediately after
SEAT_ADDED and with a rather awkward API to confirm the capabilities.
Change this to allow for dynamic binding of capabilities, i.e. a client
calls ei_bind_capability() or ei_unbind_capability() whenever it feels
like, causing the respective devices of this capabilty to be added or
removed.
This allows for clients that are temporarily disinterested in a
capability but may require said capability later.
The default function takes one capability, a helper for enable/disable
multiple capabilities in one go is provided as well. On the protocol,
only the "bind" request exists which always represents the currently
wanted set of capabilities.
Note that the helper functions for multiple capabilities require NULL
(not zero) as sentinel, thanks to gcc.
Our API requires a client to know which capability to pass into the
drop_capabilities function. This doesn't work for capabilities newer
than the client's version so they do not get disabled. The client will
thus receive devices it didn't ask for and doesn't know how to handle.
Let's invert the requirement and require the caller to confirm the
capabilities it wants - all others are dropped.
This is an API break but also requires updates of all clients, the
previous simple case of just calling ei_seat_bind() will now result in
zero capabilities.
Starting the demo client with --passive initializes a passive context,
and the server will send events to any active context.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
One macro that also defines the cleanup function, one macro that only
defines the unref. This is required for any place where we want to
use cleanup from multiple source files - like the test suite.
Let's not force users/developers to dig through the commit log to figure
out what each tool does.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The latest version of the portal communication adds session capabilities
and wraps the calls a bit differently.
This now also includes a helper tool for the impl.portal part so we can
run xdg-desktop-portal against that without the need for a mutter
implementation.
Use:
- run the eis-demo-server
- run the eis-fake-impl-portal
- run the xdg-desktop-portal (it'll use the fake impl portal)
- run an ei client with the portal enabled
Note that the ei-fake-portal is a shortcut, it will open eis directly
without going through the impl.portal.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
