dbus/bus/Makefile.am
Simon McVittie d7644b7d4f build: Compile most bus/ files into static libraries
This means we can share them between tests without having to compile
the same file repeatedly, and makes them easier to share between
directories when we move test executables into test/.

Signed-off-by: Simon McVittie <smcv@collabora.com>
2019-01-21 15:14:29 +00:00

297 lines
7.7 KiB
Makefile

dbusdatadir=$(datadir)/dbus-1
legacydbusdatadir=$(sysconfdir)/dbus-1
dbus_daemon_execdir = $(DBUS_DAEMONDIR)
# Always lib, even if ${libdir} is lib64 or lib/x86_64-linux-gnu
systemdtmpfilesdir = $(prefix)/lib/tmpfiles.d
systemdsysusersdir = $(prefix)/lib/sysusers.d
DBUS_BUS_LIBS = \
$(CODE_COVERAGE_LDFLAGS) \
$(EXPAT_LIBS) \
$(SELINUX_LIBS) \
$(APPARMOR_LIBS) \
$(THREAD_LIBS) \
$(ADT_LIBS) \
$(NETWORK_libs) \
$(NULL)
DBUS_LAUNCHER_LIBS = \
$(CODE_COVERAGE_LDFLAGS) \
$(EXPAT_LIBS) \
$(THREAD_LIBS) \
$(NETWORK_libs) \
$(NULL)
AM_CPPFLAGS = \
$(CODE_COVERAGE_CPPFLAGS) \
-I$(top_srcdir) \
$(DBUS_STATIC_BUILD_CPPFLAGS) \
$(EXPAT_CFLAGS) \
$(APPARMOR_CFLAGS) \
-DDBUS_SYSTEM_CONFIG_FILE=\""$(dbusdatadir)/system.conf"\" \
-DDBUS_RUNSTATEDIR=\""$(runstatedir)"\" \
-DDBUS_COMPILATION \
$(NULL)
# if assertions are enabled, improve backtraces
AM_LDFLAGS = @R_DYNAMIC_LDFLAG@
AM_CFLAGS = \
$(CODE_COVERAGE_CFLAGS) \
$(SANITIZE_CFLAGS) \
$(NULL)
EFENCE=
EXTRA_DIST = \
session.conf.in \
system.conf.in \
legacy-config/session.conf.in \
legacy-config/system.conf.in \
org.freedesktop.dbus-session.plist.in \
example-system-enable-stats.conf.in \
example-session-disable-stats.conf.in \
$(NULL)
dbusdata_DATA = session.conf
legacydbusdata_DATA = legacy-config/session.conf
if DBUS_UNIX
dbusdata_DATA += system.conf
legacydbusdata_DATA += legacy-config/system.conf
endif
examplesdir = ${docdir}/examples
examples_DATA = \
example-system-enable-stats.conf \
example-session-disable-stats.conf \
$(NULL)
if DBUS_ENABLE_LAUNCHD
agentdir=$(LAUNCHD_AGENT_DIR)
agent_DATA=org.freedesktop.dbus-session.plist
endif
if DBUS_BUS_ENABLE_KQUEUE
DIR_WATCH_SOURCE=dir-watch-kqueue.c
else
if DBUS_BUS_ENABLE_INOTIFY
DIR_WATCH_SOURCE=dir-watch-inotify.c
else
DIR_WATCH_SOURCE=dir-watch-default.c
endif
endif
noinst_LTLIBRARIES = libdbus-daemon-internal.la
libdbus_daemon_internal_la_SOURCES = \
activation.c \
activation.h \
activation-exit-codes.h \
apparmor.c \
apparmor.h \
audit.c \
audit.h \
bus.c \
bus.h \
config-loader-expat.c \
config-parser.c \
config-parser.h \
config-parser-common.c \
config-parser-common.h \
connection.c \
connection.h \
containers.c \
containers.h \
desktop-file.c \
desktop-file.h \
$(DIR_WATCH_SOURCE) \
dir-watch.h \
dispatch.c \
dispatch.h \
driver.c \
driver.h \
expirelist.c \
expirelist.h \
policy.c \
policy.h \
selinux.h \
selinux.c \
services.c \
services.h \
signals.c \
signals.h \
stats.c \
stats.h \
test.c \
test.h \
utils.c \
utils.h \
$(NULL)
libdbus_daemon_internal_la_LIBADD = \
$(top_builddir)/dbus/libdbus-1.la \
$(top_builddir)/dbus/libdbus-internal.la \
$(EFENCE) \
$(DBUS_BUS_LIBS) \
$(NULL)
dbus_daemon_SOURCES = main.c
dbus_daemon_LDADD = libdbus-daemon-internal.la
liblaunch_helper_internal_la_SOURCES = \
config-loader-expat.c \
config-parser-common.c \
config-parser-common.h \
config-parser-trivial.c \
config-parser-trivial.h \
desktop-file.c \
desktop-file.h \
utils.c \
utils.h \
activation-exit-codes.h \
activation-helper.h \
$(NULL)
## This is the installed launch helper with the setuid checks
## All files that have special cases #ifdef ACTIVATION_LAUNCHER_TEST must
## be here and in dbus_daemon_launch_helper_test_SOURCES, not in
## liblaunch-helper-internal.la.
dbus_daemon_launch_helper_SOURCES = \
activation-helper.c \
activation-helper-bin.c \
$(NULL)
dbus_daemon_launch_helper_LDADD = liblaunch-helper-internal.la
liblaunch_helper_internal_la_LIBADD = \
$(top_builddir)/dbus/libdbus-1.la \
$(top_builddir)/dbus/libdbus-internal.la \
$(DBUS_LAUNCHER_LIBS)
## we build another binary so we can do the launch testing without root privs.
## DO NOT INSTALL THIS FILE
## All files that have special cases #ifdef ACTIVATION_LAUNCHER_TEST must
## be here and in dbus_daemon_launch_helper_SOURCES, not in
## liblaunch-helper-internal.la.
dbus_daemon_launch_helper_test_SOURCES= \
activation-helper.c \
activation-helper-bin.c \
$(NULL)
dbus_daemon_launch_helper_test_LDADD = liblaunch-helper-internal.la
dbus_daemon_launch_helper_test_CPPFLAGS = \
$(AM_CPPFLAGS) \
-DACTIVATION_LAUNCHER_TEST
## we build yet another binary so we can do the OOM tests
## DO NOT INSTALL THIS FILE
test_bus_launch_helper_SOURCES = \
activation-helper.c \
test-launch-helper.c \
$(NULL)
test_bus_launch_helper_LDADD = liblaunch-helper-internal.la
test_bus_launch_helper_CPPFLAGS = \
$(AM_CPPFLAGS) \
-DACTIVATION_LAUNCHER_TEST \
-DACTIVATION_LAUNCHER_DO_OOM
noinst_PROGRAMS =
dbus_daemon_exec_PROGRAMS = dbus-daemon
if DBUS_UNIX
noinst_LTLIBRARIES += liblaunch-helper-internal.la
libexec_PROGRAMS = dbus-daemon-launch-helper
endif DBUS_UNIX
## Note that TESTS has special meaning (stuff to use in make check).
## We don't actually want to run any of these tests until test/ has been
## compiled, so we don't put them in TESTS here; we run them in test/
## instead.
if DBUS_ENABLE_EMBEDDED_TESTS
## we use noinst_PROGRAMS not check_PROGRAMS so that we build
## even when not doing "make check"
# run as a test by test/Makefile.am
noinst_PROGRAMS += test-bus
if DBUS_UNIX
# run as a test by test/Makefile.am
noinst_PROGRAMS += test-bus-launch-helper test-bus-system
# this is used by the tests but is not,itself, a test
noinst_PROGRAMS += dbus-daemon-launch-helper-test
endif DBUS_UNIX
endif DBUS_ENABLE_EMBEDDED_TESTS
test_bus_system_SOURCES = test-system.c
test_bus_system_LDADD = liblaunch-helper-internal.la
test_bus_SOURCES = test-main.c
test_bus_LDADD = libdbus-daemon-internal.la
install-data-hook:
$(mkinstalldirs) $(DESTDIR)$(dbusdatadir)/session.d
$(mkinstalldirs) $(DESTDIR)$(dbusdatadir)/services
if DBUS_UNIX
$(mkinstalldirs) $(DESTDIR)$(localstatedir)/run/dbus
$(mkinstalldirs) $(DESTDIR)$(dbusdatadir)/system.d
$(mkinstalldirs) $(DESTDIR)$(dbusdatadir)/system-services
endif
if HAVE_SYSTEMD
# Install dbus.socket as default implementation of a D-Bus stack.
# Deliberately not using $(LN_S) here: ln -fs is not universally portable,
# but neither is systemd, so it's OK to assume here that ln complies with SUS.
# Unconditionally enable D-Bus on systemd installations
$(mkinstalldirs) $(DESTDIR)$(systemdsystemunitdir)/sockets.target.wants
ln -fs ../dbus.socket $(DESTDIR)$(systemdsystemunitdir)/sockets.target.wants/dbus.socket
$(mkinstalldirs) $(DESTDIR)$(systemdsystemunitdir)/multi-user.target.wants
ln -fs ../dbus.service $(DESTDIR)$(systemdsystemunitdir)/multi-user.target.wants/dbus.service
endif
if DBUS_ENABLE_USER_SESSION
$(mkinstalldirs) $(DESTDIR)$(systemduserunitdir)/sockets.target.wants
ln -fs ../dbus.socket $(DESTDIR)$(systemduserunitdir)/sockets.target.wants/dbus.socket
endif
if DBUS_UNIX
install-exec-hook:
if test `id -u` -eq 0; then \
chown root:$(DBUS_USER) $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper$(EXEEXT); \
chmod 4750 $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper$(EXEEXT); \
else \
echo "Not installing $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper binary setuid!"; \
echo "You'll need to manually set permissions to root:$(DBUS_USER) and permissions 4750"; \
fi
endif
EXTRA_DIST += \
dbus.service.in \
dbus.socket.in \
systemd-user/dbus.service.in \
systemd-user/dbus.socket.in \
sysusers.d/dbus.conf.in \
tmpfiles.d/dbus.conf.in \
$(NULL)
if HAVE_SYSTEMD
systemdsystemunit_DATA = \
dbus.service \
dbus.socket
nodist_systemdsysusers_DATA = \
sysusers.d/dbus.conf
nodist_systemdtmpfiles_DATA = \
tmpfiles.d/dbus.conf \
$(NULL)
endif
if DBUS_ENABLE_USER_SESSION
systemduserunit_DATA = \
systemd-user/dbus.service \
systemd-user/dbus.socket \
$(NULL)
endif
# Add rules for code-coverage testing, as defined by AX_CODE_COVERAGE
@CODE_COVERAGE_RULES@