* dbus/dbus-connection.c: (dbus_connection_send_message):
Add a new client_serial parameter.
(dbus_connection_send_message_with_reply):
Remove a @todo since we've implemented the blocking function.
(dbus_connection_send_message_with_reply_and_block):
New function that sends a message and waits for a reply and
then returns the reply.
* dbus/dbus-connection.h:
Add new functions.
* dbus/dbus-errors.c: (dbus_result_to_string):
* dbus/dbus-errors.h:
Add new DBUS_RESULT.
* dbus/dbus-message-internal.h:
* dbus/dbus-message.c: (_dbus_message_get_reply_serial),
(_dbus_message_set_sender), (dbus_message_write_header),
(dbus_message_new_reply), (decode_header_data),
(_dbus_message_loader_return_buffer), (_dbus_message_test):
* dbus/dbus-message.h:
Add new functions that set the reply serial and sender.
Also marshal and demarshal them correctly and add test.
* dbus/dbus-protocol.h:
Add new DBUS_MESSAGE_TYPE_SENDER.
* glib/dbus-glib.h:
* glib/dbus-gmain.c: (watch_callback), (free_callback_data),
(add_watch), (remove_watch), (add_timeout), (remove_timeout),
(dbus_connection_hookup_with_g_main):
* glib/test-dbus-glib.c: (main):
Rewrite to use GIOChannel and remove the GSource crack.
* test/echo-client.c: (main):
* test/watch.c: (check_messages):
Update for changed APIs
* dbus/dbus-transport-unix.c (unix_do_iteration): only do the
reading/writing if read_watch != NULL or write_watch != NULL.
* dbus/dbus-message.c (_dbus_message_loader_return_buffer): fix
the message loader code to actually load message->header and
message->body into the newly-created message.
* dbus/dbus-transport-unix.c (check_write_watch): fix a mem leak
in OOM case
* dbus/dbus-connection.c (dbus_connection_set_max_message_size)
(dbus_connection_get_max_message_size)
(dbus_connection_set_max_live_messages_size)
(dbus_connection_get_max_live_messages_size): implement some
resource limitation functions
* dbus/dbus-resources.c: new file implementing some of the
resource limits stuff
* dbus/dbus-message.c (dbus_message_iter_get_byte_array): add
missing docs, add @todo to handle OOM etc.
* dbus/dbus-marshal.c (_dbus_demarshal_byte_array): add missing
docs
* dbus/dbus-connection.c (dbus_connection_unref): disconnect the
connection if it hasn't been already.
* dbus/dbus-connection.h: kill off the idea of an ErrorFunction,
replace with DisconnectFunction.
* configure.in: default --enable-tests to $USE_MAINTAINER_MODE
* dbus/Makefile.am: fix it up so dubs-test-main.c is included in
the distribution
* test/Makefile.am: don't use special variable "TESTS" for echo-*
since we don't want to use those in make check
* test/watch.c (error_handler): make it safe if the error handler
is called multiple times (if we s/error handler/disconnect
handler/ we should just guarantee it's called only once)
* dbus/dbus-transport.c (_dbus_transport_disconnect): call the
error handler on disconnect (it's quite possible we should
just change the error handler to a "disconnect handler," I'm
not sure we have any other meaningful errors)
* configure.in: check for getpwnam_r
* dbus/dbus-transport.c, dbus/dbus-transport-unix.c,
dbus/dbus-auth.c: add credentials support, add EXTERNAL auth
mechanism as in SASL spec, using socket credentials
* dbus/dbus-sysdeps.c (_dbus_read_credentials_unix_socket): new function
(_dbus_send_credentials_unix_socket): new function
* dbus/dbus-sysdeps.c (_dbus_accept_unix_socket): rename just
dbus_accept()
(_dbus_write): only check errno if <0 returned
(_dbus_write_two): ditto
* dbus/dbus-marshal.h (DBUS_COMPILER_BYTE_ORDER): #ifdef
WORDS_BIGENDIAN then compiler byte order is DBUS_BIG_ENDIAN,
doh
* dbus/dbus-marshal.c: Add macros to do int swapping in-place and
avoid swap_bytes() overhead (ignoring possible assembly stuff for
now). Main point is because I wanted unpack_uint32 to implement
_dbus_verbose_bytes
(_dbus_verbose_bytes): new function
* dbus/dbus-string.c (_dbus_string_validate_ascii): new function
* dbus/dbus-message.c (_dbus_message_loader_get_is_corrupted): add
mechanism to handle a corrupt message stream
(_dbus_message_loader_new): fix preallocation to only prealloc,
not prelengthen
* dbus/dbus-string.c (_dbus_string_skip_blank): fix this function
(_dbus_string_test): enhance tests for copy/move and fix the
functions
* dbus/dbus-transport-unix.c: Hold references in more places to
avoid reentrancy problems
* dbus/dbus-transport.c: ditto
* dbus/dbus-connection.c (dbus_connection_dispatch_message): don't
leak reference count in no-message case
* test/watch.c (do_mainloop): handle adding/removing watches
during iteration over the watches. Also, ref the connection/server
stored on a watch, so we don't try to mangle a destroyed one.
* dbus/dbus-transport-unix.c (do_authentication): perform
authentication
* dbus/dbus-auth.c (get_state): add a state
AUTHENTICATED_WITH_UNUSED_BYTES and return it if required
(_dbus_auth_get_unused_bytes): append the unused bytes
to the passed in string, rather than prepend
* dbus/dbus-transport.c (_dbus_transport_init_base): create
the auth conversation DBusAuth
* dbus/dbus-transport-unix.c (_dbus_transport_new_for_fd)
(_dbus_transport_new_for_domain_socket): when creating a
transport, pass in whether it's a client-side or server-side
transport so we know which DBusAuth to create
* dbus/dbus-transport-unix.c, dbus/dbus-server-unix.c: use the
below new interfaces and include fewer system headers.
* dbus/dbus-sysdeps.c (_dbus_read): new function
(_dbus_write): new function
(_dbus_write_two): new function
(_dbus_connect_unix_socket): new function
(_dbus_listen_unix_socket): new function
* dbus/dbus-message-internal.h: change interfaces to use
DBusString
* test/echo-client.c, test/echo-server.c: cheesy test
clients.
* configure.in (AC_CHECK_FUNCS): check for writev
* dbus/dbus-message.c (_dbus_message_get_network_data): new
function
* dbus/dbus-list.c (_dbus_list_foreach): new function
* dbus/dbus-internals.c (_dbus_verbose): new function
* dbus/dbus-server.c, dbus/dbus-server.h: public object
representing a server that listens for connections.
* dbus/.cvsignore: create
* dbus/dbus-errors.h, dbus/dbus-errors.c:
public API for reporting errors
* dbus/dbus-connection.h, dbus/dbus-connection.c:
public object representing a connection that
sends/receives messages. (Same object used for
both client and server.)
* dbus/dbus-transport.h, dbus/dbus-transport.c:
Basic abstraction for different kinds of stream
that we might read/write messages from.
* configure.in: pile on more warning flags if using gcc
* Doxyfile.in (EXTRACT_STATIC): set to NO, so we don't have
to document static functions
* configure.in: add summary to end of configure so it
looks nice and attractive
* dbus/dbus-hash.c: finish implementation and write unit
tests and docs
* configure.in: add --enable-tests to enable unit tests
* dbus/dbus-test.c: test program to run unit tests
for all files in dbus/*, initially runs a test for
dbus-hash.c
* dbus/dbus-internals.h: file to hold some internal utility stuff
