* test/data/auth/*: adapt to changes
* dbus/dbus-auth-script.c (_dbus_auth_script_run): add
USERID_BASE64 and change USERNAME_BASE64 to put in username not
userid
* dbus/dbus-keyring.c (_dbus_keyring_validate_context): prevent
more stuff from being in a context name, to make the protocol
simpler to deal with
* dbus/dbus-errors.c (dbus_error_has_name): new function
(dbus_error_is_set): new function
* dbus/dbus-auth.c: replace DBUS_STUPID_TEST_MECH auth
with DBUS_COOKIE_SHA1, implement DBUS_COOKIE_SHA1
* dbus/dbus-connection.c (dbus_connection_flush): also read
messages during a flush operation
* dbus/Makefile.am: remove dbus-md5 since it isn't currently used.
* dbus/dbus-auth.c (handle_server_data_external_mech): args to
dbus_credentials_match were backward
* dbus/dbus-auth-script.c (_dbus_auth_script_run): support
NO_CREDENTIALS and ROOT_CREDENTIALS
* dbus/dbus-auth.c (_dbus_auth_do_work): move get_state() routine
into here. Never process more commands after we've reached an
end state; store further data as unused bytes.
* test/data/auth/*: add more auth tests
* dbus/dbus-auth-script.c (_dbus_auth_script_run): support EXPECT
command to match exact string and EXPECT_UNUSED to match unused
bytes
* test/Makefile.am (dist-hook): fix to dist all the test stuff
* doc/dbus-specification.sgml: work on the specification
* dbus/dbus-message.c (_dbus_message_loader_return_buffer): check
the protocol version of the message.
* dbus/dbus-protocol.h: drop special _REPLY names, the spec
no longer specifies that.
(DBUS_SERVICE_REPLY_SERVICE_EXISTS): fix flags (1/2/4/8 not
1/2/3/4)
* dbus/dbus-marshal.c (_dbus_marshal_get_arg_end_pos): add missing
"break" for DBUS_TYPE_NIL, remove @todo
* doc/dbus-specification.sgml: fully specify the header. Add
flags and major protocol version, and change header/body len to
unsigned.
* dbus/dbus-message-builder.c (append_saved_length): append length
as uint32
* dbus/dbus-message.c (dbus_message_create_header): change header
length and body length to unsigned. Add the new fields from the
spec
(_dbus_message_loader_return_buffer): unsigned header/body len
* dbus/dbus-auth.c: rework to use only REJECTED, no
MECHANISMS
* doc/dbus-sasl-profile.txt: drop MECHANISMS and just
use REJECTED, suggested by Mark McLoughlin
* test/watch.c (error_handler): make it safe if the error handler
is called multiple times (if we s/error handler/disconnect
handler/ we should just guarantee it's called only once)
* dbus/dbus-transport.c (_dbus_transport_disconnect): call the
error handler on disconnect (it's quite possible we should
just change the error handler to a "disconnect handler," I'm
not sure we have any other meaningful errors)
* configure.in: check for getpwnam_r
* dbus/dbus-transport.c, dbus/dbus-transport-unix.c,
dbus/dbus-auth.c: add credentials support, add EXTERNAL auth
mechanism as in SASL spec, using socket credentials
* dbus/dbus-sysdeps.c (_dbus_read_credentials_unix_socket): new function
(_dbus_send_credentials_unix_socket): new function
* dbus/dbus-sysdeps.c (_dbus_accept_unix_socket): rename just
dbus_accept()
(_dbus_write): only check errno if <0 returned
(_dbus_write_two): ditto
* dbus/dbus-marshal.h (DBUS_COMPILER_BYTE_ORDER): #ifdef
WORDS_BIGENDIAN then compiler byte order is DBUS_BIG_ENDIAN,
doh
* dbus/dbus-marshal.c: Add macros to do int swapping in-place and
avoid swap_bytes() overhead (ignoring possible assembly stuff for
now). Main point is because I wanted unpack_uint32 to implement
_dbus_verbose_bytes
(_dbus_verbose_bytes): new function
* dbus/dbus-string.c (_dbus_string_validate_ascii): new function
* dbus/dbus-message.c (_dbus_message_loader_get_is_corrupted): add
mechanism to handle a corrupt message stream
(_dbus_message_loader_new): fix preallocation to only prealloc,
not prelengthen
* dbus/dbus-string.c (_dbus_string_skip_blank): fix this function
(_dbus_string_test): enhance tests for copy/move and fix the
functions
* dbus/dbus-transport-unix.c: Hold references in more places to
avoid reentrancy problems
* dbus/dbus-transport.c: ditto
* dbus/dbus-connection.c (dbus_connection_dispatch_message): don't
leak reference count in no-message case
* test/watch.c (do_mainloop): handle adding/removing watches
during iteration over the watches. Also, ref the connection/server
stored on a watch, so we don't try to mangle a destroyed one.
* dbus/dbus-transport-unix.c (do_authentication): perform
authentication
* dbus/dbus-auth.c (get_state): add a state
AUTHENTICATED_WITH_UNUSED_BYTES and return it if required
(_dbus_auth_get_unused_bytes): append the unused bytes
to the passed in string, rather than prepend
* dbus/dbus-transport.c (_dbus_transport_init_base): create
the auth conversation DBusAuth
* dbus/dbus-transport-unix.c (_dbus_transport_new_for_fd)
(_dbus_transport_new_for_domain_socket): when creating a
transport, pass in whether it's a client-side or server-side
transport so we know which DBusAuth to create
* doc/dbus-sasl-profile.txt: docs on the authentication protocol,
it is a simple protocol that just maps directly to SASL.
* dbus/dbus-auth.h, dbus/dbus-auth.c: authentication protocol
initial implementation, not actually used yet.
* dbus/dbus-string.c (_dbus_string_find): new function
(_dbus_string_equal): new function
(_dbus_string_base64_encode): new function
(_dbus_string_base64_decode): new function
* test/echo-client.c, test/echo-server.c: cheesy test
clients.
* configure.in (AC_CHECK_FUNCS): check for writev
* dbus/dbus-message.c (_dbus_message_get_network_data): new
function
* dbus/dbus-list.c (_dbus_list_foreach): new function
* dbus/dbus-internals.c (_dbus_verbose): new function
* dbus/dbus-server.c, dbus/dbus-server.h: public object
representing a server that listens for connections.
* dbus/.cvsignore: create
* dbus/dbus-errors.h, dbus/dbus-errors.c:
public API for reporting errors
* dbus/dbus-connection.h, dbus/dbus-connection.c:
public object representing a connection that
sends/receives messages. (Same object used for
both client and server.)
* dbus/dbus-transport.h, dbus/dbus-transport.c:
Basic abstraction for different kinds of stream
that we might read/write messages from.
* dbus/Makefile.am (INCLUDES): define DBUS_COMPILATION
so we can allow ourselves to include files directly,
instead of having to use dbus.h
* dbus/dbus.h: fill in
* dbus/dbus-message.h: sketch out a sample header file.
Include griping if you include it directly instead of
via dbus.h
* dbus/dbus-macros.h: new file with macros for extern "C",
TRUE/FALSE, NULL, etc.
* doc/file-boilerplate.c: put include guards in here
