* mono/Arguments.cs (GetDBusTypeConstructor):
type.UnderlyingSystemType will return "System.Byte" if you do it
on "byte[]", which is not what we want. So check the type.IsArray
property and use System.Array instead.
* dbus/dbus-sysdeps.c (fill_user_info): On errors do not free
the DBusUserInfo structure since this is passed into the function.
This would cause a double free when the function that allocated
the structure would try to free it when an error occured.
* (bus/session.conf.in, bus/Makefile.am, dbus/configure.in):
use /usr/share/dbus-1/services instead of /usr/lib/dbus-1.0/services
for service activation to avoid 32bit/64bit parallel install issues
* dbus/dbus-transport-unix.c (do_authentication): Return
authentication status to callers.
(unix_handle_watch): If we completed authentication this round,
don't do another read. Instead wait until the next iteration,
after we've read any pending data in the auth buffer.
(unix_do_iteration): Ditto.
(unix_handle_watch): Updated for new do_authentication prototype.
* bus/selinux.h: Add bus_selinux_enabled.
* bus/selinux.c (bus_selinux_enabled): Implement it.
* bus/config-parser.c (struct include): Add
if_selinux_enabled member.
(start_busconfig_child): Parse if_selinux_enabled
attribute for include.
(bus_config_parser_content): Handle it.
* bus/session.conf.in, bus/system.conf.in: Add
inclusion of context mapping to default config files;
conditional on SELinux being enabled.
* doc/busconfig.dtd: Add to if_selinux_enabled to default DTD.
* test/data/invalid-config-files/badselinux-1.conf,
test/data/invalid-config-files/badselinux-2.conf:
Test files for bad syntax.
* mono/BusDriver.cs: Changed BusDriver struct to remove
the ServiceCreated and ServiceDeleted events and replace them
with the new ServiceOwnerChanged event.
* mono/example/BusListener.cs: Added a new example program,
which listens for and reports any ServiceOwnerChanged events
on the bus driver.
* mono/example/Makefile.am (DESTDIR): Build changes for the
new BusListener.cs example.
* bus/driver.c, bus/driver.h, bus/services.c: Use ServiceOwnerChanged
signal instead of ServiceCreated and ServiceDeleted.
* bus/dispatch.c: update testcase for the new signal.
Patch from Nat Friedman <nat@novell.com>
* mono/Makefile.am: A number of small build fixes to allow "make
distcheck" to succeed.
* mono/example/Makefile.am: "make distcheck" fixes.
* mono/AssemblyInfo.cs.in: When signing the assembly, look for the
key in @srcdir@.
* test/Makefile.am: "make distcheck" fixes.
* doc/busconfig.dtd: update the DTD for the at_console attribute.
* bus/driver.c (bus_driver_handle_hello): correctly handle Hello
messages after the first one (bug #1389).
* bus/dispatch.c (check_double_hello_message): add a test case for the
double hello message bug. (check_existent_service_activation): fix
check of spawning error.
* mono/BusDriver.cs: Added. This is a class for interacting with
the org.freedesktop.DBus service.
* mono/Message.cs: Added a mechanism to expose the message that is
currently being dispatched via the static Message.Current
property. Added Message.Sender and Message.Destination
properties.
* mono/Handler.cs: Expose the dispatched message via
Message.Current when handling method calls.
* mono/Service.cs: Expose the dispatched message via
Message.Current when handling signal emissions.
* mono/Connection.cs: Bind dbus_bus_get_base_service via the
Connection.BaseService property.
* dbus/dbus-userdb.c (_dbus_is_console_user): remove unused variable
More fixes from Steve Grubb
* dbus/dbus-sysdeps.c (_dbus_connect_tcp_socket): fix fd leak
(_dbus_listen_tcp_socket): fix fd leak
* dbus/dbus-spawn.c (read_pid, read_ints): move the "again:" for
EINTR to a bit lower in the code
* bus/driver.c (bus_driver_handle_service_exists): Respond with
TRUE if we are inquiring about the existence of the built-in
org.freedesktop.DBus service.
* bus/config-parser.c:
(struct PolicyType): Add POLICY_CONSOLE
(struct Element.d.policy): s/gid_or_uid/gid_uid_or_at_console
(start_busconfig_child): Sets up console element when
<policy at_console=""> is encountered in a policy file
(append_rule_from_element): Convert console elements to console
rules.
* bus/policy.c:
(bus_policy_create_client_policy): Add console rules to the client
policy based on if the client is at the console
(bus_policy_append_console_rule): New function for adding a
console rule to a policy
(bus_policy_merge): Handle console rule merging
* dbus/dbus-sysdeps.h: Added the DBUS_CONSOLE_DIR constant
where we check for console user files
* dbus/dbus-sysdeps.c:
(_dbus_file_exists): New function which checks if the given
file exists
(_dbus_user_at_console): New function which does the system
specific process of checking if the user is at the console
* dbus/dbus-userdb.c:
(_dbus_is_console_user): New function converts a UID to user name
and then calls the system specific _dbus_user_at_console to
see if the user is at the console and therefor a console user
* bus/dbus-daemon-1.1.in:
* test/data/valid-config-files/many-rules.conf: set the
max_match_rules_per_connection limt from the config file.
* doc/busconfig.dtd: update the DTD.
* bus/driver.c: remove some unused variables.
* bus/selinux.h: Prototype bus_selinux_get_policy_root.
* bus/selinux.c: Create a thread for policy reload notification.
(bus_selinux_get_policy_root): Implement.
Updated SELinux support from Matthew Rickard <mjricka@epoch.ncsc.mil>
* bus/config-parser.c (start_busconfig_child)
(bus_config_parser_content): Support SELinux-root relative
inclusion.
* configure.in <HAVE_SELINUX>: Add -lpthread.
* bus/test-main.c (test_pre_hook, test_post_hook): New.
(test_post_hook): Move memory checking into here.
(test_pre_hook, test_post_hook): Move SELinux checks in
here, but conditional on a DBUS_TEST_SELINUX environment
variable. Unfortunately we can't run the SELinux checks
as a normal user, since they won't have any permissions
for /selinux. So this will have to be tested manually
for now, until we have virtualization for most of
libselinux.
* configure.in: If --enable-mono is passed in, if we can't find
mono error out.
* mono/Makefile.am: Use /gacutil to install assemblies into the
GAC and not /root.
DBusError that was causing a memoy leak (bug #989).
* dbus/dbus-keyring.c, dbus/dbus-message.c: fix compilation on
Solaris/Forte C (bug #974)
* bus/main.c (main): plug two minuscule memleaks.
in the SELinux support.
* doc/busconfig.dtd: update DTD for SELinux support.
* bus/config-loader-libxml.c: fix error handler and parser
initialisation/cleanup. OOM test now works with libxml2 HEAD.
* configure.in: remove the warning about libxml2
* dbus/dbus-bus.c: silence doxygen warning.
* bus/utils.h (BUS_SET_OOM): use dbus_error_set_const instead of
dbus_error_set.
* bus/dispatch.c (check_send_exit_to_service): fix the test case,
broken by the change in the _SET_OOM macros.
SELinux support from Matthew Rickard <mjricka@epoch.ncsc.mil>
* bus/selinux.c, bus/selinux.h: new file encapsulating selinux
functionality
* configure.in: add --enable-selinux
* bus/policy.c (bus_policy_merge): add FIXME to a comment
* bus/main.c (main): initialize and shut down selinux
* bus/connection.c: store SELinux ID on each connection, to avoid
repeated getting of the string context and converting it into
an ID
* bus/bus.c (bus_context_get_policy): new accessor, though it
isn't used
(bus_context_check_security_policy): check whether the security
context of sender connection can send to the security context of
recipient connection
* bus/config-parser.c: add parsing for <selinux> and <associate>
* dbus/dbus-transport.c (_dbus_transport_get_unix_fd): to
implement dbus_connection_get_unix_fd()
* dbus/dbus-connection.c (dbus_connection_get_unix_fd): new
function, used by the selinux stuff
backend for config file loader. Doesn't work with full OOM test yet.
* configure.in: change error when selecting libxml into a warning.
* test/data/invalid-config-files: add two non-well-formed XML files.
* glib/Makefile.am: libdbus_gtool always uses expat, not libxml.
* dbus/dbus-transport-unix.c (unix_handle_watch): do not disconnect in
case of DBUS_WATCH_HANGUP, several do_reading() may be necessary to
read all the buffer. (bug #894)
* bus/activation.c (bus_activation_activate_service): fix a potential
assertion failure (bug #896). Small optimization in the case of
auto-activation messages.
* dbus/dbus-message.c (verify_test_message, _dbus_message_test): add
test case for byte-through-vararg bug (#901). patch by Kimmo
Hämäläinen.
