* tools/dbus-launch.c (babysit): close stdout/stderr in the
babysitter process, as suggested by Thomas Leonard, so
an "eval `dbus-launch --exit-with-session`" will actually
return
* configure.in: print out EXPANDED_* variables in the summary at
the end; clean up the code that computes EXPANDED_ variables and
get the ones using exec_prefix right. Should make things work
when you build without --prefix
* dbus/dbus-object-registry.c: implement unit test,
fix bugs discovered in process
* dbus/dbus-connection.c: remove handler_table and
register_handler(), add DBusObjectRegistry usage
* dbus/dbus-objectid.c (dbus_object_id_is_null)
(dbus_object_id_set_null): new functions
* dbus/dbus-object.c: implement some of this
* dbus/dbus-object-registry.c
(_dbus_object_registry_add_and_unlock): fill in the object_id out
param
(_dbus_object_registry_new): handle OOM
* dbus/dbus-object.h: sketch out an API for registering objects
with a connection, that allows us to use as little as 24 bytes
per object and lets application code represent an object in
any conceivable way.
* dbus/dbus-object-registry.c: implement the hard bits of the
DBusConnection aspect of object API. Not yet wired up.
* dbus/dbus-marshal.c (_dbus_marshal_set_object_id): new function
(_dbus_marshal_object_id): new
(_dbus_demarshal_object_id): new
(_dbus_marshal_get_arg_end_pos): support object ID type, and
consolidate identical switch cases. Don't conditionalize handling
of DBUS_TYPE_UINT64, need to handle the type always.
(_dbus_marshal_validate_arg): consolidate identical cases, and
handle DBUS_TYPE_OBJECT_ID
* dbus/dbus-objectid.c: new file with DBusObjectID data type.
* dbus/dbus-protocol.h: add DBUS_TYPE_OBJECT_ID
* mono/Test.cs (class Test): fire up a main loop and run it
* mono/DBus.cs (DBus): don't g_thread_init since it can only be
done once, the app has to do it
2003-06-26 Havoc Pennington <hp@pobox.com>
* mono/Connection.cs: set up connection with the glib main loop
* dbus/dbus-mainloop.c (_dbus_loop_remove_watch)
(_dbus_loop_remove_timeout): Cast function pointers to (void *) for %p
* configure.in: Add -D_POSIX_C_SOURCE=199309L -DBSD_SOURCE to CFLAGS
and disable DBUS_USE_ATOMIC_INT_486 when --enable-ansi is used
* mono/Message.cs: implement Message.Wrap() that ensures we only
have a single C# wrapper per DBusMessage, assuming it works which
it probably doesn't.
* dbus/dbus-message.c (dbus_message_allocate_data_slot): new
(dbus_message_free_data_slot): new
(dbus_message_set_data): new
(dbus_message_get_data): new
* dbus/dbus-dataslot.c (_dbus_data_slot_allocator_unref)
(_dbus_data_slot_allocator_alloc): rework these to keep a
reference count on each slot and automatically manage a global
slot ID variable passed in by address
* bus/bus.c: convert to new dataslot API
* dbus/dbus-bus.c: convert to new dataslot API
* dbus/dbus-connection.c: convert to new dataslot API
* dbus/dbus-server.c: convert to new dataslot API
* glib/dbus-gmain.c: ditto
* bus/test.c: ditto
* bus/connection.c: ditto
* mono/*, gcj/*, configure.in, Makefile.am:
Check in makefiles and subdirs for mono and gcj bindings.
Neither binding actually exists, just trying to get through
all the build and other boring bits.
* dbus/dbus-transport-unix.c (unix_handle_watch): Check
for hangup and error after checking read so we won't discard
pending data if both hangup and read are set.
* configure.in: Check for socklen_t.
* dbus/dbus-sysdeps.c: Define socklen_t if it's not defined.
* test/test-segfault.c: Add #include <sys/time.h>
* tools/Makefile.am: Add DBUS_X_CFLAGS to the INCLUDES since
dbus-launch needs it.
* dbus/dbus-sysdeps.c (_dbus_listen_unix_socket): don't use
SUN_LEN, it breaks abstract socket usage
* dbus/dbus-internals.c (_dbus_verbose_real): only print PID at
starts of lines.
* dbus/dbus-server.c (dbus_server_listen): allow abstract sockets
using unix:abstract=/foo, and when listening in a tmpdir
i.e. unix:tmpdir=/tmp, always use abstract sockets if we can.
* dbus/dbus-transport.c (_dbus_transport_open): support
unix:abstract=/foo
* dbus/dbus-server-unix.c (_dbus_server_new_for_domain_socket):
support abstract sockets
* dbus/dbus-transport-unix.c
(_dbus_transport_new_for_domain_socket): support abstract sockets
* dbus/dbus-sysdeps.c (_dbus_connect_unix_socket): add "abstract"
toggle as an argument, implement abstract namespace support
(_dbus_listen_unix_socket): ditto
* configure.in: add --enable-abstract-sockets and implement
a configure check for autodetection of the right value.
* tools/dbus-cleanup-sockets.c: add utility to clean up sockets
in /tmp (though on Linux this will end up being useless,
when we add abstract namespace support)
* configure.in: define DBUS_SESSION_SOCKET_DIR in addition to
subst'ing it
* tools/dbus-send.c: Don't exit with an error code if --help was
passed. Default to using the session bus instead of the system
one.
* tools/dbus-launch.c: Ditto.
* tools/dbus-monitor.c: Ditto.
* tools/dbus-send.1: Update with new arguments.
* tools/dbus-launch.c: Emit code to export variables. New
arguments -s and -c to specify shell syntax, and a bit of code to
autodetect syntax. Also, allow specifying a program to run.
* tools/dbus-launch.1: Update with new arguments.
* tools/dbus-send.1: Ditto.
* tools/dbus-monitor.1: Ditto.
* bus/config-parser.c (merge_included): merge in policies from
child configuration file.
* bus/policy.c (bus_policy_merge): function to merge two policies
together
* dbus/dbus-connection.c: disable verbose lock spew
* tools/dbus-send.c: add --print-reply command line option
* tools/dbus-print-message.h (print_message): new util function
shared by dbus-send and dbus-monitor
* tools/dbus-monitor.c (handler_func): exit on disconnect
* dbus/dbus-transport-unix.c (do_reading): if the transport is
disconnected, don't try to use the read_watch
* dbus/dbus-watch.c (dbus_watch_get_enabled): assert watch != NULL
so we can find this bug more easily
* tools/dbus-monitor.c: Add --session argument and usage()
function.
* tools/dbus-monitor.1: Update with new --session arg.
* bus/Makefile.am (install-data-hook): Create
$(libdir)/dbus-1.0/services so that the session bus is happy.
* configure.in: 0.11
* NEWS: update
* bus/Makefile.am (initddir): apparently we are supposed to put
init scripts in /etc/rc.d/init.d not /etc/init.d
* bus/Makefile.am: remove the "you must --enable-tests to make
check" as it broke distcheck
* bus/Makefile.am (install-data-hook): create /etc/dbus-1/system.d
* configure.in:
* bus/activation.c: (bus_activation_service_created),
(bus_activation_activate_service):
* bus/driver.c: (bus_driver_send_service_deleted),
(bus_driver_send_service_created), (bus_driver_send_service_lost),
(bus_driver_send_service_acquired),
(bus_driver_send_welcome_message),
(bus_driver_handle_list_services):
* bus/session.conf.in:
* dbus/dbus-bus.c: (dbus_bus_acquire_service),
(dbus_bus_service_exists), (dbus_bus_activate_service):
* dbus/dbus-bus.h:
Add some convenience API which lets you activate a service, and did a
bunch of s/0/DBUS_TYPE_INVALID/ in calls to dbus_message_append_args()
and dbus_message_get_args()
* dbus/dbus-marshal.c (_dbus_marshal_validate_arg): fix to avoid
calling _dbus_marshal_validate_arg() for every byte in a byte
array, etc.
* dbus/dbus-message-handler.c: use atomic reference counting to
reduce number of locks slightly; the global lock in here sucks
* dbus/dbus-connection.c
(_dbus_connection_update_dispatch_status_and_unlock): variant of
update_dispatch_status that can be called with lock held; then use
in a couple places to reduce locking/unlocking
(dbus_connection_send): hold the lock over the whole function
instead of acquiring it twice.
* dbus/dbus-timeout.c (_dbus_timeout_new): handle OOM
* bus/connection.c (bus_connections_setup_connection): fix access
to already-freed memory.
* dbus/dbus-connection.c: keep a little cache of linked list
nodes, to avoid using the global linked list alloc lock in the
normal send-message case. Instead we just use the connection lock
that we already have to take.
* dbus/dbus-list.c (_dbus_list_find_last): new function
* dbus/dbus-sysdeps.c (_dbus_atomic_inc, _dbus_atomic_dec):
change to use a struct for the atomic type; fix docs,
they return value before increment, not after increment.
* dbus/dbus-string.c (_dbus_string_append_4_aligned)
(_dbus_string_append_8_aligned): new functions to try to
microoptimize this operation.
(reallocate_for_length): break this out of set_length(), to
improve profile info, and also so we can consider inlining the
set_length() part.
* dbus/dbus-message.c (dbus_message_new_empty_header): init data
strings with some preallocation, cuts down on our calls to realloc
a fair bit. Though if we can get the "move entire string to empty
string" optimization below to kick in here, it would be better.
* dbus/dbus-string.c (_dbus_string_move): just call
_dbus_string_move_len
(_dbus_string_move_len): add a special case for moving
an entire string into an empty string; we can just
swap the string data instead of doing any reallocs.
(_dbus_string_init_preallocated): new function
Write a "test-profile" that does echo client-server with threads;
profile reveals lock contention, memcpy/realloc of buffers, and
UTF-8 validation as hot spots. 20% of lock contention eliminated
with dbus_atomic_inc/dec implementation on x86. Much remaining
contention is global mempool locks for GList and DBusList.
* dbus/dbus-sysdeps.c (_dbus_atomic_inc, _dbus_atomic_dec): add
x86 implementation
* dbus/dbus-connection.c (struct DBusConnection): use
dbus_atomic_t for the reference count
* dbus/dbus-message.c (struct DBusMessage): declare
dbus_atomic_t values as volatile
* configure.in: code to detect ability to use atomic integer
operations in assembly, from GLib patch
* dbus/dbus-internals.c (_dbus_verbose_real): call getpid every
time, tired of it being wrong in threads and forked processes
* glib/test-profile.c: a little program to bounce messages back
and forth between threads and eat CPU
* dbus/dbus-connection.c: add debug spew macros for debugging
thread locks; include config.h at top; fix deadlock in
dbus_connection_flush()
* dbus/dbus-spawn.c: s/_exit/exit/ because it was keeping gcov
data from getting written, and there wasn't a good reason to
use _exit really.
* test/decode-gcov.c (mark_inside_dbus_build_tests): don't count
dbus_verbose lines in test coverage
(main): add list of functions sorted by # of untested blocks
to the coverage report
* dbus/dbus-mempool.c: put some test-only code in DBUS_BUILD_TESTS
* dbus/dbus-marshal.c (_dbus_marshal_test): extend test coverage
* dbus/dbus-message-handler.c (_dbus_message_handler_test):
extend test coverage
* test/data/auth/cancel.auth-script: test canceling an
authentication
* dbus/Makefile.am: remove dbus-server-debug.[hc] for now, as they
aren't used. in CVS history if we end up needing them.
* dbus/dbus-message-handler.c (_dbus_message_handler_test): add
unit test
* dbus/dbus-marshal.c (_dbus_demarshal_string_array): fix this
function, which assumed length was in # of strings, not bytes
* dbus/dbus-message.c (_dbus_message_test): add tests for some
missing coverage
* dbus/dbus-connection.c
(_dbus_connection_queue_received_message): disable function for
now, we are only using it in test mode
* dbus/dbus-message.c (_dbus_message_loader_queue_messages):
remove a mistaken FIXME
