* doc/TODO: remove the "guid" item
* test/glib/test-profile.c (no_bus_thread_func): use open_private
(with_bus_thread_func): use open_private
* dbus/dbus-connection.c (dbus_connection_open_private): new
function that works like the old dbus_connection_open()
(dbus_connection_open): now returns an existing connection if
possible
* dbus/dbus-server-unix.c (handle_new_client_fd_and_unlock): pass
through the GUID to the transport
* dbus/dbus-server.c (_dbus_server_init_base): keep around the
GUID in hex-encoded form.
* dbus/dbus-server-debug-pipe.c (_dbus_transport_debug_pipe_new):
pass GUID argument in to the transport
* dbus/dbus-transport-unix.c (_dbus_transport_new_for_fd): add
guid argument
* dbus/dbus-transport.c (_dbus_transport_init_base): add guid argument
* dbus/dbus-auth.c (_dbus_auth_server_new): add guid argument
* dbus/dbus-server.c, dbus/dbus-server-unix.c: change semantics so
you must disconnect before unref, since locking and other things
are screwed up otherwise. Fix assorted other locking stuff.
* dbus/dbus-signature.c (dbus_signature_iter_get_element_type):
fix compilation
* dbus/dbus-threads-internal.h: move the mutex/condvar wrappers
into a private header and don't export from the library
* throughout - call _dbus_thread_stuff vs. dbus_thread_stuff
* dbus/dbus-protocol.h (DBUS_SERVICE_ORG_FREEDESKTOP_DBUS):
Rename to DBUS_SERVICE_DBUS.
(DBUS_PATH_ORG_FREEDESKTOP_DBUS): Rename to DBUS_PATH_DBUS.
(DBUS_PATH_ORG_FREEDESKTOP_LOCAL): Rename to DBUS_PATH_LOCAL.
(DBUS_INTERFACE_ORG_FREEDESKTOP_DBUS): Rename to DBUS_INTERFACE_DBUS.
(DBUS_INTERFACE_ORG_FREEDESKTOP_INTROSPECTABLE): Rename to
DBUS_INTERFACE_INTROSPECTABLE.
(DBUS_INTERFACE_ORG_FREEDESKTOP_PROPERTIES): Rename to
DBUS_INTERFACE_PROPERTIES.
(DBUS_INTERFACE_ORG_FREEDESKTOP_PEER): Rename to
DBUS_INTERFACE_PEER.
(DBUS_INTERFACE_ORG_FREEDESKTOP_LOCAL):
DBUS_INTERFACE_LOCAL.
All other users of those constants have been changed.
* bus/driver.c (bus_driver_handle_introspect): Use constants.
* glib/dbus-gobject.c (handle_introspect): Use constants.
* doc/dbus-faq.xml, doc/dbus-specification.xml: Update for rename.
* dbus/dbus-message-factory.c (generate_special): modify test to
avoid using a non-basic dict key
* dbus/dbus-marshal-validate-util.c: add test for the below
* doc/dbus-specification.xml: require that dict keys are a basic
type
* dbus/dbus-marshal-validate.c
(_dbus_validate_signature_with_reason): require that dict key is a
basic type
* Throughout, grand renaming to strip out the use of "service",
just say "name" instead (or "bus name" when ambiguous). Did not
change the internal code of the message bus itself, only the
programmer-facing API and messages.
* doc/dbus-specification.xml: further update the message bus section
* bus/config-parser.c (all_are_equiv): fix bug using freed string
in error case
* test/glib/test-profile.c (with_bus_server_filter): fix crash
* dbus/dbus-marshal-basic.c (_dbus_unpack_uint32): inline as macro
when DBUS_DISABLE_ASSERT
(_dbus_marshal_set_basic): be sure we align for the string length
* dbus/dbus-marshal-recursive.c (skip_one_complete_type): make
this look faster
* dbus/dbus-string.c (_dbus_string_get_const_data_len): add an
inline macro version
(_dbus_string_set_byte): provide inline macro version
* Land the new message args API and type system.
This patch is huge, but the public API change is not
really large. The set of D-BUS types has changed somewhat,
and the arg "getters" are more geared toward language bindings;
they don't make a copy, etc.
There are also some known issues. See these emails for details
on this huge patch:
http://lists.freedesktop.org/archives/dbus/2004-December/001836.htmlhttp://lists.freedesktop.org/archives/dbus/2005-January/001922.html
* dbus/dbus-marshal-*: all the new stuff
* dbus/dbus-message.c: basically rewritten
* dbus/dbus-memory.c (check_guards): with "guards" enabled, init
freed blocks to be all non-nul bytes so using freed memory is less
likely to work right
* dbus/dbus-internals.c (_dbus_test_oom_handling): add
DBUS_FAIL_MALLOC=N environment variable, so you can do
DBUS_FAIL_MALLOC=0 to skip the out-of-memory checking, or
DBUS_FAIL_MALLOC=10 to make it really, really, really slow and
thorough.
* qt/message.cpp: port to the new message args API
(operator<<): use str.utf8() rather than str.unicode()
(pretty sure this is right from the Qt docs?)
* glib/dbus-gvalue.c: port to the new message args API
* bus/dispatch.c, bus/driver.c: port to the new message args API
* dbus/dbus-string.c (_dbus_string_init_const_len): initialize the
"locked" flag to TRUE and align_offset to 0; I guess we never
looked at these anyhow, but seems cleaner.
* dbus/dbus-string.h (_DBUS_STRING_ALLOCATION_PADDING):
move allocation padding macro to this header; use it to implement
(_DBUS_STRING_STATIC): ability to declare a static string.
* dbus/dbus-message.c (_dbus_message_has_type_interface_member):
change to return TRUE if the interface is not set.
* dbus/dbus-string.[hc]: move the D-BUS specific validation stuff
to dbus-marshal-validate.[hc]
* dbus/dbus-marshal-basic.c (_dbus_type_to_string): move here from
dbus-internals.c
* dbus/Makefile.am: cut over from dbus-marshal.[hc]
to dbus-marshal-*.[hc]
* dbus/dbus-object-tree.c (_dbus_decompose_path): move this
function here from dbus-marshal.c
* dbus/dbus-string.h (_dbus_string_get_byte): inline when asserts
are disabled
(_dbus_string_get_const_data): inline when asserts are disabled
* dbus/dbus-message.c: record the _dbus_current_generation of
creation so we can complain if dbus_shutdown() is used improperly.
Do this only if checks are enabled.
* dbus/dbus-connection.c: ditto
* test/glib/test-profile.c: add with_bus mode to profile echoes
that go through the bus.
* test/glib/run-test.sh: add ability to run test-profile
* bus/dbus-daemon-1.1.in: fix to say that SIGHUP causes partial
config file reload.
* test/glib/test-profile.c: tweak a bit, add support for some
made-up minimal malloc overhead with plain sockets, since in
real life some sort of buffers are unavoidable thus we could
count them in the theoretical best case
* dbus/dbus-message.c (struct DBusMessage): put the locked bit and
the "char byte_order" next to each other to save 4 bytes
(dbus_message_new_empty_header): reduce preallocation, since the
message cache should achieve a similar effect
(dbus_message_cache_or_finalize, dbus_message_get_cached): add a
message cache that keeps a few DBusMessage around in a pool,
another 8% speedup or so.
* dbus/dbus-dataslot.c (_dbus_data_slot_list_clear): new function
The primary change here is to always write() once before adding
the write watch, which gives us about a 10% performance increase.
* dbus/dbus-transport-unix.c: a number of modifications to cope
with removing messages_pending
(check_write_watch): properly handle
DBUS_AUTH_STATE_WAITING_FOR_MEMORY; adapt to removal of
messages_pending stuff
(check_read_watch): properly handle WAITING_FOR_MEMORY and
AUTHENTICATED cases
(unix_handle_watch): after writing, see if the write watch can be
removed
(unix_do_iteration): assert that write_watch/read_watch are
non-NULL rather than testing that they aren't, since they
aren't allowed to be NULL. check_write_watch() at the end so
we add the watch if we did not finish writing (e.g. got EAGAIN)
* dbus/dbus-transport-protected.h: remove messages_pending call,
since it resulted in too much inefficient watch adding/removing;
instead we now require that the transport user does an iteration
after queueing outgoing messages, and after trying the first
write() we add a write watch if we got EAGAIN or exceeded our
max bytes to write per iteration setting
* dbus/dbus-string.c (_dbus_string_validate_signature): add this
function
* dbus/dbus-server-unix.c (unix_finalize): the socket name was
freed and then accessed, valgrind flagged this bug, fix it
* dbus/dbus-message.c: fix several bugs where HEADER_FIELD_LAST was taken
as the last valid field plus 1, where really it is equal to the
last valid field. Corrects some message corruption issues.
* dbus/dbus-mainloop.c: verbosity changes
* dbus/dbus-keyring.c (_dbus_keyring_new_homedir): handle OOM
instead of aborting in one of the test codepaths
* dbus/dbus-internals.c (_dbus_verbose_real): fix a bug that
caused not printing the pid ever again if a verbose was missing
the newline at the end
(_dbus_header_field_to_string): add HEADER_FIELD_SIGNATURE
* dbus/dbus-connection.c: verbosity changes;
(dbus_connection_has_messages_to_send): new function
(_dbus_connection_message_sent): no longer call transport->messages_pending
(_dbus_connection_send_preallocated_unlocked): do one iteration to
try to write() immediately, so we can avoid the write watch. This
is the core purpose of this patchset
(_dbus_connection_get_dispatch_status_unlocked): if disconnected,
dump the outgoing message queue, so nobody will get confused
trying to send them or thinking stuff is pending to be sent
* bus/test.c: verbosity changes
* bus/driver.c: verbosity/assertion changes
* bus/dispatch.c: a bunch of little tweaks to get it working again
because this patchset changes when/where you need to block.
* test/glib/test-profile.c: modify to accept a plain_sockets
argument in which case it will bench plain sockets instead of
libdbus, for comparison purposes.
* test/glib/test-profile.c (N_CLIENT_THREADS): run multiple
threads for more time, so sysprof can get a grip on it.
* dbus/dbus-string.c (_dbus_string_validate_utf8): remove
pointless variable
* test/glib/test-profile.c: fix this thing up a bit
* dbus/dbus-message.c (dbus_message_new_empty_header): increase
preallocation sizes by a fair bit; not sure if this will be an
overall performance win or not, but it does reduce reallocs.
* dbus/dbus-string.c (set_length, reallocate_for_length): ignore
the test hack that forced constant realloc if asserts are
disabled, so we can profile sanely. Sprinkle in some
_DBUS_UNLIKELY() which are probably pointless, but before I
noticed the real performance problem I put them in.
(_dbus_string_validate_utf8): micro-optimize this thing a little
bit, though callgrind says it didn't help; then special-case
ascii, which did help a lot; then be sure we detect nul bytes as
invalid, which is a bugfix.
(align_length_then_lengthen): add some more _DBUS_UNLIKELY
superstition; use memset to nul the padding instead of a manual
loop.
(_dbus_string_get_length): inline this as a
macro; it showed up in the profile because it's used for loop
tests and so forth
* dbus/dbus-glib-error-enum.h: autogenerate the GError enum
codes from the dbus error names
* glib/dbus-glib.h: move to subdir dbus/ since it's included
as dbus/dbus-glib.h and that breakage is now visible due to
including dbus/dbus-glib.h in dbus-glib-lowlevel.h
* glib/dbus-glib.h: s/gproxy/g_proxy/
* dbus/dbus-shared.h: new header to hold stuff shared with
binding APIs
* dbus/dbus-protocol.h (DBUS_ERROR_*): move errors here rather
than dbus-errors.h
* glib/dbus-glib.h (dbus_set_g_error): move to
dbus-glib-lowlevel.h
* glib/dbus-glib.h: remove dbus/dbus.h from here; change a bunch
of stuff to enable this
* dbus/dbus-glib-lowlevel.h: put dbus/dbus.h here
* a bunch of other changes with the same basic "separate glib
bindings from dbus.h" theme
