This lets them be thread-safe by default, at the cost that they can
now fail.
init_uninitialized_locks() and init_global_locks() must now both
reimplement the equivalent of _dbus_register_shutdown_func(), by using
_dbus_platform_rmutex_lock() on the same underlying mutex around a call
to _dbus_register_shutdown_func_unlocked().
This is because if they used the usual _DBUS_LOCK() API (as
_dbus_register_shutdown_func() does), it would automatically try to
initialize global locking, leading to infinite recursion.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=54972
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Alban Crequy <alban.crequy@collabora.co.uk>
Reviewed-by: Anas Nashif <anas.nashif@intel.com>
[The libxml code path has been broken for at least 2.5 years, and Expat
is tiny, so there seems no point in supporting both. -smcv]
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=20253
Signed-off-by: Chengwei Yang <chengwei.yang@intel.com>
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
dbus-daemon will crash due to invalid service file which key/value
starts before section. In that situation, new_line() will try to access
invalid address.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=60853
Signed-off-by: Chengwei Yang <chengwei.yang@intel.com>
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
When dbus-daemon receives a request to activate a systemd service before
systemd has connected to it, it enqueues a fake request to "activate"
systemd itself (as a way to get a BusPendingActivationEntry to track the
process of waiting for systemd). When systemd later joins the bus,
dbus-daemon sends the actual activation message; any future activation
messages are sent directly to systemd.
In the "pending" code path, the activation messages are currently
dispatched as though they had been sent by the same process that sent
the original activation request, which is wrong: the bus security
policy probably doesn't allow that process to talk to systemd directly.
They should be dispatched as though they had been sent by the
dbus-daemon itself (connection == NULL), the same as in the non-pending
code path.
In the worst case, if the attempt to activate systemd timed out, the
dbus-daemon would crash with a (fatal) warning, because in this special
case, activation_message is a signal with no serial number, whereas the
code to send an error reply is expecting a method call with a serial
number.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=50199
Signed-off-by: Chengwei Yang <chengwei.yang@intel.com>
Tested-by: Ma Yu <yu.ma@intel.com>
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
As Ralf pointed out, we usually use upper-case when substituting
variables (apart from "somethingdir", which Autoconf conventionally
makes lower-case for some reason).
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=63682
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Ralf Habacker <ralf.habacker@freenet.de>
QNX has an arbitrary limit to the number of file descriptors
which may be passed in a message, which is smaller than the
current default. This patch therefore changes the default from
a hardcoded constant to a macro, which is determined at configure
time by looking at the host operating system.
[This reduces the limit from 4096 (session)/1024 (system) to 128 fds
per message on QNX, and 1024 fds per message on other operating systems.
I think the reduced session bus limit on other OSs is a reasonable change
too, given that the default hard/soft ulimits in Linux are only 4096/1024
fds per process. -smcv]
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=61176
Reviewed-by: Simon McVittie <simon.mcvittie.collabora.co.uk>
This causes the test to fail. The assumption implicitly being made was
"if pid 1 is systemd, then every caller of _dbus_init_system_log() is a
systemd service" which is not valid for the regression test.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=63163
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Colin Walters <walters@verbum.org>
QNX's copy of sys/inotify.h is broken, and doesn't include
stdint.h even though it refers to types from it. Therefore,
it must be included manually.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=61176
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
<servicehelper> is not supported in the included config file, i. e. it's
not merged in merge_included(). There's clearly no reason it shouldn't
be supported in the included config file along with <user>, <type>
and others. It's quite reasonable for a client willing to override the
default servicehelper, e. g. in system-local.conf.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=51560
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Otherwise, the tests try to connect to the real system bus, which will
often fail - particularly if you run the tests configured for the default
/usr/local (with no intention of installing the result), in which case
the tests would try to connect to /usr/local/var/run/dbus/system_bus_socket.
Reviewed-by: Colin Walters <walters@verbum.org>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=52202
The fix for CVE-2012-3524 filters out all environment variables if
libdbus is used from a setuid program, to prevent various spoofing
attacks.
Unfortunately, the activation helper is a setuid program linking
libdbus, and this creates a regression for launched programs using
DBUS_STARTER_ADDRESS, since it will no longer exist.
Fix this by hardcoding the starter address to the default system bus
address.
Signed-off-by: Geoffrey Thomas <gthomas@mokafive.com>
Signed-off-by: Colin Walters <walters@verbum.org>
The fix for CVE-2012-3524 filters out all environment variables if
libdbus is used from a setuid program, to prevent various spoofing
attacks.
Unfortunately, the activation helper is a setuid program linking
libdbus, and this creates a regression for launched programs using
DBUS_STARTER_ADDRESS, since it will no longer exist.
Fix this by hardcoding the starter address to the default system bus
address.
Signed-off-by: Geoffrey Thomas <gthomas@mokafive.com>
Signed-off-by: Colin Walters <walters@verbum.org>
On Unix, the connect address should basically always be "autolaunch:"
but the listen address has to be something you can listen on.
On Windows, you can listen on "autolaunch:" or
"autolaunch:scope=*install-path", for instance, and the dbus-daemon is
involved in the auto-launching process.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=38201
Reviewed-by: David Zeuthen <davidz@redhat.com>
[default address changed to autolaunch: for interop with GDBus -smcv]
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
When libdbus-1 moved to using monotonic time support for the
DBUS_COOKIE_SHA1 authentication was broken, in particular
interoperability with non-libdbus-1 implementations such as GDBus.
The problem is that if monotonic clocks are available in the OS,
_dbus_get_current_time() will not return the number of seconds since
the Epoch so using it for DBUS_COOKIE_SHA1 will violate the D-Bus
specification. If both peers are using libdbus-1 it's not a problem
since both ends will use the wrong time and thus agree. However, if
the other end is another implementation and following the spec it will
not work.
First, we change _dbus_get_current_time() back so it always returns
time since the Epoch and we then rename it _dbus_get_real_time() to
make this clear. We then introduce _dbus_get_monotonic_time() and
carefully make all current users of _dbus_get_current_time() use it,
if applicable. During this audit, one of the callers,
_dbus_generate_uuid(), was currently using monotonic time but it was
decided to make it use real time instead.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=48580
This means the bus test can use them without needing
dbus-message-private.h, reducing its view of message internals.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=46095
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
This makes it a bit clearer what's going on.
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Lennart Poettering <lennart@poettering.net>
When used with init systems such as systemd (where PID files are
redundant) this allows us to disable PID files even if a path is
configured for them in the normal bus configuration files.
Make use of this new switch in the systemd unit file.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=45520
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
In practice, it never works, because the activation helper doesn't
respect environment variables for security reasons.
If you want to vary the search path, alter system.conf instead, to
replace or augment <standard_system_servicedirs/> with your preferred
search path.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=21620
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
To optimize startup a bit, drop machine UUID generation from the unit
file. Since a while D-Bus was already capable of making use of the
/etc/machine-id file, which is guaranteed to exist on systemd systems
(since the first released versions already), hence there's no need to
ever generate a D-Bus specific machine ID.
In times where userspace takes < 800ms to boot up getting rid of this
process optimizes boot time further.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=45520
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Someone seems to have merged part of master into 1.4. Again. Let's go
back to the "last known good" point (the branch-point of some 1.4
branches I had locally), then we can cherry-pick the changes that
should have gone in.
In Unix, the tests listened on both debug-pipe (which is a socketpair,
or a TCP emulation of socketpair on Windows) and a Unix socket.
In the Windows port, the tests were hard-coded to listen on a particular
port, which allowed the dispatch test to connect to that port, as long
as no two tests ran simultaneously (which I don't think was ever guaranteed -
make -j can violate this). That's valid out-of-process, and also
fully-specified, so they only needed one <listen> directive, so the
CMake input only had one.
To make the tests work under CMake on Unix, there was a hack: the string
substituted for the content of the <listen> directive contained
</listen><listen> to get the other address in, which is pretty nasty.
Instead of doing that, I've made both build systems, on both Unix and
Windows, use both debug-pipe and a more normal transport (Unix or TCP).
debug-pipe has a Windows implementation and it's used in
dbus-spawn-win.c, so it'd better work. The use of debug-pipe is now
hard-coded rather than being a configure parameter (there's no reason
to vary it in different builds), and I used TEST_LISTEN as the name of the
Unix/TCP address, because it's a "vague" address (no specific Unix path, no
TCP port), that you can listen on but not connect to.
This in turn means that we can merge the Autoconf .in and CMake .cmake
files, similar to Bug #41033.
You might wonder why I've kept debug-pipe. I did try to get rid of it, but
it turns out that the tests in dispatch.c rely on
dbus_connection_open_private() not blocking, and normal socket
connections block on connect(). Until we fix that by adding an async
version of dbus_connection_open_private(), it won't be safe to have a
test like dispatch.c that "talks to itself", unless it uses a transport
as trivial as debug-pipe in which neither end has to block on the other.
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Ralf Habacker <ralf.habacker@freenet.de>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=41222
Since 1.4.4 (commit 75cfd97f) this function always returned FALSE. As far
as I can see this was actually harmless, because both of its callers
ignore any error that is not NoMemory (and treat it the same as success).
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=39230
Reviewed-by: Will Thompson <will.thompson@collabora.co.uk>
If we're going to return FALSE for this (which has apparently always
been the case), then we should set an error properly.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=39230
Reviewed-by: Will Thompson <will.thompson@collabora.co.uk>
