We were mistakenly running all installed executables, even manual tests
that never terminate.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=93194
Reviewed-by: Ralf Habacker <ralf.habacker@freenet.de>
A closing brace must be preceded by a semicolon. The CI integration
added later in this branch actually runs "make installcheck"
with no DESTDIR; apparently nobody else has ever tried that.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=93194
Reviewed-by: Ralf Habacker <ralf.habacker@freenet.de>
Previously, we didn't consistently test parsing of every file in
valid-config-files-system/ everywhere that we tested valid-config-files/.
We now test it on Unix.
The system bus is not supported on Windows, so we do not test
valid-config-files-system/ there.
valid-config-files/many-rules.conf contains <user> and <group> rules
which are not applicable to Windows. Copy the original many-rules.conf
to valid-config-files-system/ so that it will be tested on Unix, and
remove the non-portable rules from valid-config-files/many-rules.conf.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=92721
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
[rh:base patch came from Simon]
On closer inspection of Automake docs, this is how AM_TESTS_ENVIRONMENT
is actually meant to work; the parallel test driver is even less
compatible with the old serial test driver than I'd realised :-(
Also, according to <http://www.unix.com/man-page/POSIX/1posix/export>,
"export FOO=bar" is actually required functionality for POSIX shells,
and is not a bashism. The Autoconf documentation mentions Solaris 10
as an example of somewhere this doesn't work... but at this point
I'd prefer to say "compiling dbus requires a POSIX shell".
Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=89846
Since Automake 1.13 (released December 2012) the correct way for a
maintainer to specify environment variables has been
AM_TESTS_ENVIRONMENT, with TESTS_ENVIRONMENT reserved for the user.
That doesn't work in older Automake, so drop support for such old
versions.
Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=89846
It doesn't do anything - the variable I was thinking of is called
DBUS_TEST_HOMEDIR. Also, if I had spelled it correctly, the tests
would have failed, because libdbus (quite reasonably) won't create
a nonexistent $HOME to write out cookie_sha1 files in ~/.dbus_keyrings.
Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=89846
For the ones written using GLib, the output is in TAP format if we
say --tap. For the one not written using GLib, the output is in TAP
and the command-line is ignored.
Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=89846
testutils_shared_if_possible_cppflags is now just a copy of AM_CPPFLAGS,
which is the default and does not need to be given explicitly, so
those lines can be removed.
Similarly, testutils_shared_if_possible_libs is just the
libdbus-testutils.la convenience library, so expand it and
remove the unnecessary variable.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=83115
Reviewed-by: Ralf Habacker <ralf.habacker@freenet.de>
Now that we're normally linking libdbus-1 dynamically, we need to
use DBUS_STATIC_BUILD_CPPFLAGS in every Makefile that would normally
link it dynamically, but might link it statically if we are only
building static libraries.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=83115
Reviewed-by: Ralf Habacker <ralf.habacker@freenet.de>
The shared can be used by dbus-daemon and dbus-daemon-launch-helper by exporting
the private symbols needed, reducing the size of dbus by about 500k.
The private symbols are exposed under the version
LIBDBUS_PRIVATE_@VERSION_NUMBER@.
[Altered by Simon McVittie and Ralf Habacker to clear up some
problematic linking.]
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=83115
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Ralf Habacker <ralf.habacker@freenet.de>
This gets rid of a potential circular dependency, which is annoying
when bootstrapping. It is nice to have the regression tests use
the shared libdbus, but we're about to make it possible to
do that anyway, even though some of them use internal symbols.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=83115
Reviewed-by: Ralf Habacker <ralf.habacker@freenet.de>
test-marshal and test-syntax need the
$(testutils_shared_if_possible_cppflags), so that they will get the
$(static_cflags) when we are not linking to dbus-glib.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=88980
Reviewed-by: Ralf Habacker <ralf.habacker@freenet.de>
This includes most of the situations I could think of:
* method call on dbus-daemon and response
* NameOwnerChanged
* NameAcquired, NameLost (although I'm not 100% sure these should
get captured, since they're redundant with NameOwnerChanged)
* unicast message is allowed through
* unicast message is rejected by no-sending or no-receiving policy
* broadcast is allowed through
* broadcast is rejected by no-sending policy (the error reply
is also captured)
* broadcast is rejected by no-receiving policy (there is no error
reply)
* message causing service activation, and the message telling systemd
to do the actual activation
* systemd reporting that activation failed
It does not cover:
* sending a message to dbus-daemon, then provoking a reply, then
dbus-daemon does not allow itself to send the reply due to its
own security policy
This is such an obscure corner case that I'm not even convinced it's
testable without dropping down into lower-level socket manipulation:
dbus-daemon's replies are always assumed to be requested replies,
and replies contain so little other metadata that I think we can
only forbid them by forbidding all method replies. If we do that,
the reply to Hello() won't arrive and the client-side connection will
not become active.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=46787
Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
We run each test twice:
* once with the system's session.conf, as an integration test
(test-cases that need a special configuration are automatically
skipped)
* once with our special test configuration files, which provide better
coverage
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=88810
Reviewed-by: Philip Withnall
In the process, make test_kill_pid() safer: do not try to terminate
more than one pid, or the NULL handle.
Also stop leaking the address_fd in spawn_dbus_daemon, a pre-existing
bug that was spotted by Philip Withnall during review.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=88810
Reviewed-by: Philip Withnall
As an implementation detail, dbus-daemon handles this situation by
artificially triggering a timeout (even if its configured timeout for
method calls is in fact infinite). However, using the same debug message
for both is misleading, and can lead people who are debugging a service
crash to blame dbus-daemon instead, wasting their time.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=76112
[Add its source file to SOURCES: this test was previously relying on the
Automake feature that the default value of foo_bar_SOURCES is foo-bar.c. -smcv]
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=73495
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
In general, I think developers running the tests would expect
them to terminate rather than hanging. Developers who want to debug
such an abort by attaching a debugger to a live process can still set
DBUS_BLOCK_ON_ABORT in the environment.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=41252
Reviewed-by: Ralf Habacker <ralf.habacker@freenet.de>
We don't want the regression tests' "session" getting mixed up in
system-wide "sessions". This doesn't actually matter yet, but it is
likely to matter in future.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=61301
Reviewed-by: Chengwei Yang <chengwei.yang@intel.com>
[merged with earlier line-wrapping of TESTS_ENVIRONMENT -smcv]
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
In principle we ought to define DBUS_STATIC_BUILD in anything that's
using libdbus-internal.la (to avoid linking failures on
statically-linked mingw builds), and DBUS_TEST_USE_INTERNAL in any
test that's using the non-dbus-glib code paths of test-utils.[ch]
(to avoid the GLib requirement, although in practice, everything
"shared if possible" requires GLib at the moment anyway).
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=68852
Reviewed-by: Ralf Habacker <ralf.habacker@freenet.de>
We only use dbus-glib for its main loop; within dbus, DBusLoop is
available as an alternative, although it isn't thread-safe and
isn't public API.
For tests that otherwise only use libdbus public API, it's desirable to
be able to avoid DBusLoop, so we can run them against an installed
libdbus as an integration test. However, if we don't have dbus-glib,
we're going to have to use an in-tree main loop, which might as well
be DBusLoop.
The major disadvantage of using dbus-glib is that it isn't safe to
link both dbus-1 and dbus-internal at the same time. This is awkward
for a future test case that wants to use _dbus_getsid() in dbus-daemon.c,
but only on Windows (fd.o #54445). If we use the same API wrapper around
both dbus-glib and DBusLoop, we can compile that test against dbus-glib
or against DBusLoop, depending on the platform.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=68852
Reviewed-by: Ralf Habacker <ralf.habacker@freenet.de>
