hmm, make check is currently not passing.
* doc/dbus-specification.xml: add requirement that custom type
names follow the same rules as interface names.
* dbus/dbus-protocol.h: change some of the byte codes, to avoid
duplication and allow 'c' to be 'custom'; dict is now 'm' for
'map'
* doc/dbus-specification.xml: update type codes to match
dbus-protocol.h, using the ASCII byte values. Rename type NAMED to
CUSTOM. Add type OBJECT_PATH to the spec.
2003-10-17 Havoc Pennington <hp@redhat.com>
* bus/driver.c (create_unique_client_name): use "." as separator
in base service names instead of '-'
* dbus/dbus-string.c (_dbus_string_get_byte): allow getting nul
byte at the end of the string
* dbus/dbus-internals.h (_DBUS_LIKELY, _DBUS_UNLIKELY): add
optimization macros since string validation seems to be a slow
point.
* doc/dbus-specification.xml: restrict valid
service/interface/member/error names. Add test suite code for the
name validation.
* dbus/dbus-string.c: limit service/interface/member/error names
to [0-9][A-Z][a-z]_
* dbus/dbus-connection.c (dbus_connection_dispatch): add missing
format arg to verbose spew
* glib/dbus-gproxy.c (dbus_gproxy_call_no_reply): if not out of
memory, return instead of g_error
* test/test-service.c (path_message_func): support emitting a
signal on request
* dbus/dbus-bus.c (init_connections_unlocked): only fill in
activation bus type if DBUS_BUS_ACTIVATION was set; default to
assuming the activation bus was the session bus so that services
started manually will still register.
(init_connections_unlocked): fix so that in OOM situation we get
the same semantics when retrying the function
* test/test-service.c (main): change to use path registration, to
test those codepaths; register with DBUS_BUS_ACTIVATION rather
than DBUS_BUS_SESSION
* doc/dbus-specification.sgml: don't require header fields
to be 4-byte aligned and specify that fields should be
distinguished from padding by the fact that zero is not
a valid field name.
* doc/TODO: remove re-alignment item and add item to doc
the OBJECT_PATH type.
* dbus/dbus-message.c:
(HeaderField): rename the original member to value_offset
and introduce a name_offset member to keep track of where
the field actually begins.
(adjust_field_offsets): remove.
(append_int_field), (append_uint_field),
(append_string_field): don't align the start of the header
field to a 4-byte boundary.
(get_next_field): impl finding the next marhsalled field
after a given field.
(re_align_field_recurse): impl re-aligning a number of
already marshalled fields.
(delete_field): impl deleting a field of any type and
re-aligning any following fields.
(delete_int_or_uint_field), (delete_string_field): remove.
(set_int_field), (set_uint_field): no need to re-check
that we have the correct type for the field.
(set_string_field): ditto and impl re-aligning any
following fields.
(decode_header_data): update to take into account that
the fields aren't 4-byte aligned any more and the new
way to distinguish padding from header fields. Also,
don't exit when there is too much header padding.
(process_test_subdir): print the directory.
(_dbus_message_test): add test to make sure a following
field is re-aligned correctly after field deletion.
* dbus/dbus-string.[ch]:
(_dbus_string_insert_bytes): rename from insert_byte and
allow the insert of multiple bytes.
(_dbus_string_test): test inserting multiple bytes.
* dbus/dbus-marshal.c: (_dbus_marshal_set_string): add
warning note to docs about having to re-align any
marshalled values following the string.
* dbus/dbus-message-builder.c:
(append_string_field), (_dbus_message_data_load):
don't align the header field.
* dbus/dbus-auth.c: (process_test_subdir): print the
directory.
* test/break-loader.c: (randomly_add_one_byte): upd. for
insert_byte change.
* test/data/invalid-messages/bad-header-field-alignment.message:
new test case.
* test/data/valid-messages/unknown-header-field.message: shove
a dict in the unknown field.
Get matching rules mostly working in the bus; only actually
parsing the rule text remains. However, the client side of
"signal connections" hasn't been started, this patch is only the
bus side.
* dbus/dispatch.c: fix for the matching rules changes
* bus/driver.c (bus_driver_handle_remove_match)
(bus_driver_handle_add_match): send an ack reply from these
method calls
* glib/dbus-gproxy.c (dbus_gproxy_begin_call): fix order of
arguments, reported by Seth Nickell
* bus/config-parser.c (append_rule_from_element): support
eavesdrop=true|false attribute on policies so match rules
can be prevented from snooping on the system bus.
* bus/dbus-daemon-1.1.in: consistently use terminology "sender"
and "destination" in attribute names; fix some docs bugs;
add eavesdrop=true|false attribute
* bus/driver.c (bus_driver_handle_add_match)
(bus_driver_handle_remove_match): handle AddMatch, RemoveMatch
messages
* dbus/dbus-protocol.h (DBUS_SERVICE_ORG_FREEDESKTOP_BROADCAST): get
rid of broadcast service concept, signals are just always broadcast
* bus/signals.c, bus/dispatch.c, bus/connection.c, bus/bus.c:
mostly implement matching rules stuff (currently only exposed as signal
connections)
* doc/dbus-specification.sgml: Change the header field name
to be an enum and update the rest of the spec to reference
the fields using the conventinal name.
* dbus/dbus-protocol.h: update to reflect the spec.
* doc/TODO: add item to remove the 4 byte alignment requirement.
* dbus/dbus-message.c: Remove the code to generalise the
header/body length and serial number header fields as named
header fields so we can reference field names using the
protocol values.
(append_int_field), (append_uint_field), (append_string_field):
Append the field name as a byte rather than four chars.
(delete_int_or_uint_field), (delete_string_field): reflect the
fact that the field name and typecode now occupy 4 bytes instead
of 8.
(decode_string_field), (decode_header_data): update to reflect
protocol changes and move the field specific encoding from
decode_string_field() back into decode_header_data().
* dbus/dbus-internals.[ch]: (_dbus_header_field_to_string):
Add utility to aid debugging.
* dbus/dbus-message-builder.c:
(append_string_field), (_dbus_message_data_load): Update to
reflect protocol changes; Change the FIELD_NAME directive
to HEADER_FIELD and allow it to take the field's conventional
name rather than the actual value.
* test/data/*/*.message: Update to use HEADER_FIELD instead
of FIELD_NAME; Always align the header on an 8 byte boundary
*before* updating the header length.
* doc/dbus-specification.sgml: partial updates
* bus/dbus-daemon-1.1.in: fix the config file docs for the
zillionth time; hopefully I edited the right file this time.
* bus/config-parser.c (append_rule_from_element): support
send_type, send_path, receive_type, receive_path
* bus/policy.c: add message type and path to the list of things
that can be "firewalled"
* test/data/valid-config-files/system.d/test.conf: change to
root for the user so warnings don't get printed
* dbus/dbus-message.c: add dbus_message_get_path,
dbus_message_set_path
* dbus/dbus-object-tree.c (do_test_dispatch): add test of
dispatching to a path
* dbus/dbus-string.c (_dbus_string_validate_path): add
* dbus/dbus-marshal.c (_dbus_demarshal_object_path): implement
(_dbus_marshal_object_path): implement
* dbus/dbus-protocol.h (DBUS_HEADER_FIELD_PATH): new header field
to contain the path to the target object
(DBUS_HEADER_FIELD_SENDER_SERVICE): rename
DBUS_HEADER_FIELD_SENDER to explicitly say it's the sender service
* dbus/dbus-message.c (decode_string_field): support FIELD_SENDER
(dbus_message_is_error): fix this function
* bus/dbus-daemon-1.1: clarify logic on when <deny>/<allow> rules
match
* bus/policy.c (bus_client_policy_check_can_receive): fix code to
reflect clarified man page
(bus_client_policy_check_can_send): ditto
* bus/session.conf.in: fixup
* bus/system.conf.in: fixup
* dbus/dbus-hash.c (_dbus_hash_table_insert_two_strings): fix
* dbus/dbus-message.c (_dbus_message_loader_queue_messages): fix
dumb bug created earlier (wrong order of args to
decode_header_data())
* tools/dbus-send.c: port
* tools/dbus-print-message.c (print_message): port
* test/data/*messages: port all messages over
* dbus/dbus-message-builder.c: support including
message type
* bus/driver.c: port over
* bus/dispatch.c: port over to new stuff
* dbus/dbus-connection.c (_dbus_connection_new_for_transport):
rename disconnect signal to "Disconnected"
* dbus/dbus-spawn.c: s/_exit/exit/ because it was keeping gcov
data from getting written, and there wasn't a good reason to
use _exit really.
* test/decode-gcov.c (mark_inside_dbus_build_tests): don't count
dbus_verbose lines in test coverage
(main): add list of functions sorted by # of untested blocks
to the coverage report
* dbus/dbus-mempool.c: put some test-only code in DBUS_BUILD_TESTS
* dbus/dbus-marshal.c (_dbus_marshal_test): extend test coverage
* dbus/dbus-message-handler.c (_dbus_message_handler_test):
extend test coverage
* test/data/auth/cancel.auth-script: test canceling an
authentication
* dbus/Makefile.am: remove dbus-server-debug.[hc] for now, as they
aren't used. in CVS history if we end up needing them.
* configure.in: 0.10
* NEWS: update
* bus/system.conf.in: add <includedir>system.d</includedir>
* dbus/dbus-userdb.c (_dbus_user_database_lookup): fix bug when
username was provided but not uid
* bus/config-parser.c (struct BusConfigParser): keep track of
whether the parser is toplevel or was included; change some
of the error handling if it's included.
test suite is slightly hosed at the moment, will fix soon
* bus/connection.c (bus_connections_expire_incomplete): fix to
properly disable the timeout when required
(bus_connection_set_name): check whether we can remove incomplete
connections timeout after we complete each connection.
* dbus/dbus-mainloop.c (check_timeout): fix this up a bit,
probably still broken.
* bus/services.c (bus_registry_acquire_service): implement max
number of services owned, and honor allow/deny rules on which
services a connection can own.
* bus/connection.c (bus_connection_get_policy): report errors here
* bus/activation.c: implement limit on number of pending
activations
* test/data/valid-config-files/basic.conf: add <limit> tags to
this test
* bus/config-parser.h, bus/config-parser.c, bus/bus.c: Implement
<limit> tag in configuration file.
* test/data/valid-messages/opposite-endian.message: fix test
to use proper type for rply field
* test/data/invalid-messages: add tests for below validation
* dbus/dbus-message.c (decode_header_data): validate field types,
and validate that named fields are valid names
(decode_name_field): consider messages in the
org.freedesktop.Local. namespace to be invalid.
* dbus/dbus-string.c (_dbus_string_validate_name): new
* dbus/dbus-userdb.c: user database abstraction, mostly to get
caching, but at some point we might want to be able to use a
different database.
* bus/dispatch.c (bus_dispatch_sha1_test): add a test that uses
SHA1 conf file to test the sha1 auth mechanism, since the regular
test always uses EXTERNAL when available.
* configure.in,
test/data/valid-config-files/debug-allow-all-sha1.conf.in:
add conf file that requires use of sha1 auth
* dbus/dbus-mainloop.c: fix some reentrancy issues by refcounting
callbacks
* test/data/valid-config-files/debug-allow-all.conf.in: allow all
users
* dbus/dbus-transport.c (_dbus_transport_get_dispatch_status):
fix to only recover unused bytes if we're already authenticated
(_dbus_transport_get_is_authenticated): fix to still mark us
authenticated if there are unused bytes.
* bus/dispatch.c: implement security policy checking
* bus/connection.c (bus_transaction_send_from_driver): new
* bus/bus.c (bus_context_check_security_policy): new
* bus/dispatch.c (send_service_nonexistent_error): delete this,
now we just set the DBusError and it gets converted to an error
reply.
* bus/connection.c (allow_user_function): enable code using actual
data from the config file
* bus/policy.c (list_allows_user): handle wildcard rules for
user/group connection perms
* bus/policy.h: change BusPolicy to be the thing from the config
file, and rename old BusPolicy to BusClientPolicy
* bus/bus.c, bus/connection.c, bus/config-parser.c: change to
match change in how policy works
* dbus/dbus-internals.h: mark assert_not_reached as
__attribute((noreturn))__
* bus/dispatch.c (check_segfault_service_activation): add test
for launching an executable that just crashes.
* test/test-segfault.c (main): try setting coredumpsize to 0 so we
don't leave a million cores. We'll see how portable this is.
* dbus/dbus-marshal.[ch]:
Add array_type_pos argument to _dbus_marshal_validate_arg.
Let you pass a NULL end_pos to _dbus_marshal_validate_type.
* dbus/dbus-message.[ch]:
Multi-dimensional arrays have full type specification in the
outermost array. Iter code re-arranged to handle this.
Added some more iter tests.
* doc/dbus-specification.sgml:
Add me to authors.
Remove old FIXME.
Update new array encoding description.
Correct DBUS_SERVICE_FLAGS_REPLACE_EXISTING description.
* test/data/invalid-messages/array-with-mixed-types.message:
* test/data/valid-messages/array-of-array-of-uint32.message:
Change to the new array format.
* test/data/invalid-messages/too-short-dict.message:
Fix bug in test.
* test/data/valid-messages/recursive-types.message:
Fix up and extend test.
* test/data/invalid-messages/array-with-mixed-types.message:
regression test that fails for the moment
* dbus/dbus-test.c (dbus_internal_do_not_use_run_tests): reorder
tests for convenience
* dbus/dbus-marshal.c (_dbus_marshal_validate_arg): don't allow
array of nil, it broke things.
* test/data/invalid-messages/array-of-nil.message: regression test
* test/data/valid-messages/array-of-array-of-uint32.message:
happened to write this so added it to suite
Implemented recursive types, named types and new-style iters
* bus/driver.c:
* glib/test-thread-client.c: (thread_func):
* glib/test-thread-server.c: (handle_test_message):
* test/test-service.c: (handle_echo):
Update to new api
* dbus/Makefile.am:
* dbus/dbus-dict.c:
* dbus/dbus-dict.h:
* dbus/dbus.h
Remove DBusDict
* dbus/dbus-internals.c: (_dbus_type_to_string):
Update for new types.
* dbus/dbus-marshal.[ch]:
Implement recursive types and the new marshalling format.
Remove hardcoded dict marshalling.
Marshal named types.
* dbus/dbus-message-builder.c:
Add BYTE_ARRAY.
Remove references to old types
* dbus/dbus-message.[ch]:
New non-refcounted iter API that supports recursive iters.
Use iters for appending, including support for recursive
iters.
Add byte and named type support.
Update everything to new marshalling formats.
Add tests for new API.
* dbus/dbus-protocol.h:
Remove old array types.
Add types: BYTE, ARRAY, DICT, NAMED
* dbus/dbus-string.c:
* dbus/dbus-sysdeps.c:
Make parse_double locale safe.
* dbus/dbus-test-main.c:
Call setlocale.
* dbus/dbus-test.c:
Kill dict test
* doc/dbus-specification.sgml:
Update spec
* test/data/incomplete-messages/missing-body.message:
* test/data/invalid-messages/bad-boolean.message:
* test/data/invalid-messages/bad-boolean-array.message:
* test/data/invalid-messages/boolean-array-length-too-long.message-raw:
* test/data/invalid-messages/boolean-has-no-value.message-raw:
* test/data/invalid-messages/too-short-dict.message:
* test/data/valid-messages/dict-simple.message:
* test/data/valid-messages/dict.message:
* test/data/valid-messages/emptiness.message:
* test/data/valid-messages/lots-of-arguments.message:
* test/data/valid-messages/no-padding.message:
* test/data/valid-messages/recursive-types.message:
Add missing NAME fields
Fix up dicts & arrays
* test/data/invalid-messages/dict-with-nil-value.message:
Removed, this is not invalid anymore.
* test/data/valid-messages/recursive-types.message:
Add new test for deeply recursive types.
* bus/bus.c (bus_context_new): print the address in here, rather
than in main(), because we need to do it before forking the daemon
* bus/dispatch.c (send_service_nonexistent_error): set the sender
on the service nonexistent error
* bus/driver.c (bus_driver_handle_acquire_service): set the
sender on the AcquireService reply
* test/data/valid-config-files/debug-allow-all.conf.in: Make test
server also listen on a UNIX socket so services can connect to it.
* test/Makefile.am (all-local): add a rule to copy tests to
builddir, so we can have generated tests. Use this to remove the
silly hack for testing system.conf and session.conf. Will use this
shortly to generate .service files pointing to test binaries.
* dbus/dbus-sysdeps.c (_dbus_file_get_contents): include filenames
in error messages
(_dbus_string_get_dirname): new
(_dbus_sysdeps_test): new
(_dbus_directory_open): include dirnames in error messages
* bus/config-parser.c: interpret <include> and <includedir> and
<servicedir> relative to config file location if the given
filename is not absolute.
* dbus/dbus-string.c (_dbus_string_find_byte_backward): new
* bus/config-parser.c, bus/bus.c: implement <servicedir> and
<includedir> (at least mostly)
* dbus/dbus-sysdeps.c (_dbus_change_identity): set the group ID
first, then the user ID
* dbus/dbus-transport-unix.c (_dbus_transport_new_for_domain_socket)
(_dbus_transport_new_for_tcp_socket): these didn't need the "server"
argument since they are always client side
* dbus/dbus-server.c (dbus_server_get_address): new function
* bus/main.c (main): take the configuration file as an argument.
* test/data/valid-config-files/debug-allow-all.conf: new file to
use with dispatch.c tests for example
* bus/test-main.c (main): require test data dir
* bus/bus.c (bus_context_new): change this to take a
configuration file name as argument
* doc/config-file.txt (Elements): add <servicedir>
* bus/system.conf, bus/session.conf: new files
* dbus/dbus-bus.c (dbus_bus_get): look for system bus on
well-known socket if none set
* configure.in: create system.conf and session.conf
* bus/config-parser.c: hacking
* dbus/dbus-memory.c: don't use DBusList for the list of stuff
to shut down, since it could cause weirdness with the DBusList
lock
* dbus/dbus-list.c (_dbus_list_test): add tests for the
link-oriented stack routines
(alloc_link): free the mempool if the first alloc from it fails
* dbus/dbus-mempool.c (struct DBusMemBlock): fix alignment issue
* dbus/dbus-string.c (UNICODE_VALID): sync new version of this
from GLib
(_dbus_string_skip_white): new
* doc/config-file.txt (Elements): add <includedir>
* bus/test-main.c, dbus/dbus-test.c (main): check memleaks
after every test so it's quick and easy to see which leaked, and
so we test multiple dbus_shutdown() calls
* configure.in: change configure.in XML stuff to also support
expat
* config-loader-libxml.c: some hacking
* config-loader-expat.c: some hacking
* config-parser.c: some hacking, plus tests
* dbus/dbus-connection.c:
(dbus_connection_send_with_reply_and_block):
Decrease connection->n_incoming when removing an entry
from the list.
* dbus/dbus-dict.c: (dbus_dict_entry_free),
(dbus_dict_set_boolean_array), (dbus_dict_set_int32_array),
(dbus_dict_set_uint32_array), (dbus_dict_set_double_array),
(dbus_dict_set_byte_array), (dbus_dict_set_string_array),
(dbus_dict_get_boolean_array), (dbus_dict_get_double_array),
(dbus_dict_get_byte_array):
Handle NULL arrays and strings. Also add support for byte arrays.
* dbus/dbus-marshal.c: (_dbus_marshal_byte_array),
(_dbus_marshal_dict), (_dbus_demarshal_byte_array),
(_dbus_demarshal_int32_array), (_dbus_demarshal_uint32_array),
(_dbus_demarshal_double_array), (_dbus_demarshal_string_array),
(_dbus_demarshal_dict), (demarshal_and_validate_len),
(_dbus_marshal_validate_arg), (_dbus_marshal_test):
* dbus/dbus-marshal.h:
Add support for marshalling and demarshalling empty arrays and strings.
* dbus/dbus-message.c: (dbus_message_append_args_valist),
(dbus_message_append_string_array),
(dbus_message_iter_get_boolean),
(dbus_message_iter_get_boolean_array),
(dbus_message_iter_get_int32_array),
(dbus_message_iter_get_uint32_array),
(dbus_message_iter_get_double_array),
(dbus_message_iter_get_byte_array),
(dbus_message_iter_get_string_array), (dbus_message_iter_get_dict),
(check_message_handling):
Add support for getting empty arrays and dicts.
* dbus/dbus-string.c: (_dbus_string_validate_utf8):
Don't do any validation at all for now, that's better than just checking
for ASCII.
* test/data/valid-messages/emptiness.message:
New test message with lots of empty arrays.
Mega-patch that gets the message bus daemon initially handling
out-of-memory. Work still needed. Also lots of random
moving stuff to DBusError instead of ResultCode.
* dbus/dbus-list.c (_dbus_list_length_is_one): new function
* dbus/dbus-connection.c
(dbus_connection_send_with_reply_and_block): use DBusError
* dbus/dbus-bus.c: adapt to API changes, make it use DBusError not
DBusResultCode
* dbus/dbus-connection.c (dbus_connection_send): drop the result
code here, as the only failure possible is OOM.
* bus/connection.c (bus_connection_disconnect):
rename bus_connection_disconnected as it's a notification only
* bus/driver.c (bus_driver_handle_acquire_service): don't free
"name" on get_args failure, should be done by get_args;
don't disconnect client for bad args, just return an error.
(bus_driver_handle_service_exists): ditto
* bus/services.c (bus_services_list): NULL-terminate returned array
* bus/driver.c (bus_driver_send_service_lost)
(bus_driver_send_service_acquired): send messages from driver to a
specific client to the client's unique name, not to the broadcast
service.
* dbus/dbus-message.c (decode_header_data): reject messages that
contain no name field
(_dbus_message_get_client_serial): rename to
dbus_message_get_serial and make public
(_dbus_message_set_serial): rename from set_client_serial
(_dbus_message_set_reply_serial): make public
(_dbus_message_get_reply_serial): make public
* bus/connection.c (bus_connection_foreach): allow stopping
iteration by returning FALSE from foreach function.
* dbus/dbus-connection.c (dbus_connection_send_preallocated)
(dbus_connection_free_preallocated_send)
(dbus_connection_preallocate_send): new API for sending a message
without possibility of malloc failure.
(dbus_connection_send_message): rename to just
dbus_connection_send (and same for whole function family)
* dbus/dbus-errors.c (dbus_error_free): make this reinit the error
* dbus/dbus-sysdeps.c (_dbus_exit): new function
* bus/activation.c: handle/return errors
* dbus/dbus-errors.h: add more DBUS_ERROR #define
* dbus/dbus-sysdeps.c (_dbus_directory_open) (_dbus_file_get_contents)
(_dbus_directory_get_next_file): use DBusError instead of DBusResultCode
(_dbus_result_from_errno): move to this file
* dbus/dbus-marshal.c:
(_dbus_marshal_set_string):
Take a length argument so we can marshal the correct string
length.
(_dbus_marshal_dict), (_dbus_demarshal_dict),
(_dbus_marshal_get_arg_end_pos), (_dbus_marshal_validate_arg),
(_dbus_marshal_test):
* dbus/dbus-marshal.h:
Add support for marshalling and demarshalling dicts.
* dbus/dbus-message-builder.c: (_dbus_message_data_load):
Add support for TYPE DICT.
* dbus/dbus-message.c: (set_string_field):
Adjust header padding.
(dbus_message_append_args_valist), (dbus_message_append_dict),
(dbus_message_get_args_valist), (dbus_message_iter_get_arg_type),
(dbus_message_iter_get_dict), (_dbus_message_loader_return_buffer),
(check_message_handling), (check_have_valid_message):
* dbus/dbus-message.h:
Add functions for setting and getting dicts.
* dbus/dbus-protocol.h:
Add DBUS_TYPE_DICT.
* dbus/dbus.h:
Add dbus-dict.h
* doc/dbus-specification.sgml:
Add information about how dicts are marshalled.
* test/data/invalid-messages/dict-with-nil-value.message:
* test/data/invalid-messages/too-short-dict.message:
* test/data/valid-messages/dict-simple.message:
* test/data/valid-messages/dict.message:
Add sample messages containing dicts.
* test/data/auth/*: adapt to changes
* dbus/dbus-auth-script.c (_dbus_auth_script_run): add
USERID_BASE64 and change USERNAME_BASE64 to put in username not
userid
* dbus/dbus-keyring.c (_dbus_keyring_validate_context): prevent
more stuff from being in a context name, to make the protocol
simpler to deal with
* dbus/dbus-errors.c (dbus_error_has_name): new function
(dbus_error_is_set): new function
* dbus/dbus-auth.c: replace DBUS_STUPID_TEST_MECH auth
with DBUS_COOKIE_SHA1, implement DBUS_COOKIE_SHA1
* dbus/dbus-connection.c (dbus_connection_flush): also read
messages during a flush operation
* dbus/Makefile.am: remove dbus-md5 since it isn't currently used.
* test/break-loader.c (randomly_set_extreme_ints): add test that
sets really huge and small integers
* dbus/dbus-marshal.c (_dbus_marshal_validate_arg): add check
that length of boolean array fits in the string, and that
string has room for boolean value in single-bool case.
* dbus/dbus-message-builder.c (_dbus_message_data_load): add
optional value to "ALIGN" command which is what to fill the
alignment with.
* test/data/valid-messages/no-padding.message: add regression
test for the message padding problem
* dbus/dbus-message.c (dbus_message_iter_get_string_array):
(dbus_message_iter_get_byte_array): Fix up doxygen warnings
* dbus/dbus-sha.c: add implementation of SHA-1 algorithm
* dbus/test/data/sha-1: add US government test suite for SHA-1
* dbus/dbus-marshal.c: (_dbus_demarshal_string_array):
Make string arrays NULL-terminated.
* dbus/dbus-memory.c: (dbus_free_string_array):
* dbus/dbus-memory.h:
New function for freeing NULL-terminated string arrays.
* dbus/dbus-message-builder.c: (append_quoted_string),
(_dbus_message_data_load):
Add support for array types.
* dbus/dbus-message.c: (check_message_handling):
Add more types as test cases.
* dbus/dbus-sysdeps.c: (_dbus_string_parse_int),
(_dbus_string_parse_double):
Add the start offset to the end offset.
* test/data/valid-messages/lots-of-arguments.message:
New test message with lots of arguments.
* configure.in:
Add check for nonposix getpwnam_r
* dbus/dbus-mempool.c: (_dbus_mem_pool_new):
Align the pool element size to a sizeof (void *) boundary.
* dbus/dbus-sysdeps.c: (_dbus_setenv), (_dbus_connect_unix_socket),
(_dbus_listen_unix_socket), (_dbus_credentials_from_username):
General Solaris fixes.
* test/data/valid-messages/simplest-manual.message:
Explicitly state that we want little-endian packing.
* dbus/dbus-auth.c (handle_server_data_stupid_test_mech): Just get
credentials from our currently running process.
(get_word): Fix a buglet where we were copying the entire length
instead of relative to our position.
* dbus/dbus-hash.c (_dbus_hash_test): Don't try to allocate the
keys on the stack... it's 640k of data.
* dbus/dbus-sysdeps.c (_dbus_read_credentials_unix_socket): Always
read the credentials byte off the socket, even if we don't have
SO_PEERCRED.
(_dbus_poll): Implement poll() using select() for systems which
don't have it.
* glib/test-dbus-glib.c (main): Print out an error if no
parameters are given.
* test/data/auth/fallback.auth-script: Added. Tests that a client
can fallback to a secondary auth mechanism if the first fails.
* dbus/dbus-connection.c (dbus_connection_set_change_sigpipe):
allow people to avoid setting SIGPIPE to SIG_IGN
(_dbus_connection_new_for_transport): disable SIGPIPE unless
we've been asked not to
* dbus/dbus-auth.c (handle_server_data_external_mech): args to
dbus_credentials_match were backward
* dbus/dbus-auth-script.c (_dbus_auth_script_run): support
NO_CREDENTIALS and ROOT_CREDENTIALS
* dbus/dbus-auth.c (_dbus_auth_do_work): move get_state() routine
into here. Never process more commands after we've reached an
end state; store further data as unused bytes.
* test/data/auth/*: add more auth tests
* dbus/dbus-auth-script.c (_dbus_auth_script_run): support EXPECT
command to match exact string and EXPECT_UNUSED to match unused
bytes
* test/Makefile.am (dist-hook): fix to dist all the test stuff
* dbus/dbus-string.c (_dbus_string_pop_line): fix to also strip
\r off of popped lines
* dbus/dbus-auth.c (_dbus_auth_test): write code to run auth
scripts
* dbus/dbus-auth-script.c (_dbus_auth_script_run): when doing a
SEND, append \r\n
* dbus/dbus-address.c: (dbus_address_entry_free):
Free key and value lists.
* dbus/dbus-internals.c: (_dbus_type_to_string):
Add the types we didn't have.
* dbus/dbus-marshal.c: (_dbus_marshal_get_arg_end_pos),
(_dbus_marshal_validate_arg):
Add NIL types.
* dbus/dbus-message.c: (dbus_message_set_sender):
Remove todo about being able to set sender to NULL.
(dbus_message_set_is_error_reply),
(dbus_message_get_is_error_reply):
* dbus/dbus-message.h:
New functions.
* dbus/dbus-protocol.h:
Add error reply flag.
* test/data/valid-messages/opposite-endian.message:
Add NIL type to test.
* dbus/dbus-message.c: use message->byte_order instead of
DBUS_COMPILER_BYTE_ORDER throughout.
(dbus_message_create_header): pad header to align the
start of the body of the message to 8-byte boundary
* dbus/dbus-marshal.h: make all the demarshalers take const
DBusString arguments.
* dbus/dbus-message.c (_dbus_message_loader_return_buffer):
validate message args here, so we don't have to do slow validation
later, and so we catch bad messages as they are incoming. Also add
better checks on header_len and body_len. Also fill in
message->byte_order
* dbus/dbus-string.c (_dbus_string_validate_utf8): new (not
implemented properly)
(_dbus_string_validate_nul): new function to check all-nul
* dbus/dbus-marshal.c (_dbus_marshal_get_field_end_pos): rename
get_arg_end_pos and remove all validation
(_dbus_marshal_validate_arg): actually do validation here.
