Patch from Timo Teräs:
* tools/dbus-send.c (main): if --print-reply, assume type is
method call; support boolean type args
* dbus/dbus-connection.c (dbus_connection_send_with_reply): fix a
bunch of memleak and logic bugs
* NEWS: 0.21 updates
* configure.in: 0.21
* doc/Makefile.am: add all XMLTO usage to DBUS_XML_DOCS_ENABLED
* python/Makefile.am: change to avoid dist of dbus_bindings.c so
you don't need pyrex to make dist
* qt/Makefile.am (libdbus_qt_1_la_SOURCES): add integrator.h to
sources; run moc
* dbus/dbus-marshal.c (_dbus_marshal_get_arg_end_pos):
fix a bug with CUSTOM types.
* dbus/dbus-message.c (message_iter_test, _dbus_message_test): add
a unit test for this bug (used to fail).
* bus/activation.c:
(babysitter_watch_callback): notify all pending activations waiting for
the same exec that the activation failed.
(bus_activation_activate_service): shortcut the activation if we
already waiting for the same executable to start up.
* bus/activation.c:
- Added service file reloading.
Each service files directory is kept in an hash table in
BusActivation and each BusActivationEntry knows what .service-file it
was read from. So when you try to activate a service the bus will
check if it's been updated, removed or if new .service-files has
been installed.
- Test code at the bottom for the service file reloading.
* bus/test-main.c: (main):
* bus/test.h:
- added service reloading test.
* dbus/dbus-sysdeps.c:
* dbus/dbus-sysdeps.h: (_dbus_delete_directory): Added.
* dbus/dbus-string.c (_dbus_string_append_printf_valist): Fix a
bug where args were used twice. This bug resulted in a segfault
on a Debian/PPC system when starting the messagebus daemon. Include
dbus-sysdeps.h for DBUS_VA_COPY
* dbus/dbus-sysdeps.h: Define DBUS_VA_COPY if neccessary. From GLib
* configure.in: Check for va_copy; define DBUS_VA_COPY to the
appropriate va_copy implementation. From GLib
* dbus/dbus-message.c (dbus_message_iter_append_dict): Set
wrote_dict_key to FALSE on the iter that the dict is appended to,
just like when appending other types. Fixes a bug where a dict
couldn't be put inside a dict.
(dbus_message_iter_append_dict_key): Fix typo in warning message.
(message_iter_test, _dbus_message_test): Add test case for dict
inside dict.
* python/dbus.py: Add the actual message when calling the reciever
of a signal such that parameters can be inspected. Add the method
remove_signal_receiver
What sucks is the lack of automatic moc file creation in the configuration
system. Someone needs to copy over some of ours admin dir (and knowing life
that's probably going to be me).
* NEWS: update
* configure.in: bump version to 0.20
* configure.in (have_qt): add yet another place to look for qt
(someone hand trolltech a .pc file...)
* bus/expirelist.c (do_expiration_with_current_time): detect
failure of the expire_func due to OOM
* bus/connection.c (bus_pending_reply_expired): return FALSE on OOM
* bus/dispatch.c (check_send_exit_to_service): fix to handle the
NoReply error that's now created by the bus when the service exits
* dbus/dbus-message.c (_dbus_message_test): enable and fix the
tests for set_path, set_interface, set_member, etc.
* dbus/dbus-string.c (_dbus_string_insert_bytes): allow 0 bytes
* dbus/dbus-message.c (set_string_field): always just delete and
re-append the field; accept NULL for deletion
(re_align_fields_recurse): reimplement
* dbus/dbus-connection.c: fix docs to properly describe the
disconnected message
(_dbus_connection_notify_disconnected): remove this function;
we can't synchronously add the disconnected message, we have to
do it after we've queued any remaining real messages
(_dbus_connection_get_dispatch_status_unlocked): queue the
disconnect message only if the transport has finished queueing all
its real messages and is disconnected.
(dbus_connection_disconnect): update the dispatch status here
* bus/bus.c (bus_context_check_security_policy): fix up assertion
* bus/connection.c (bus_transaction_send_from_driver): set the
destination to the connection's base service
hmm, make check is currently not passing.
* doc/dbus-specification.xml: add requirement that custom type
names follow the same rules as interface names.
* dbus/dbus-protocol.h: change some of the byte codes, to avoid
duplication and allow 'c' to be 'custom'; dict is now 'm' for
'map'
* doc/dbus-specification.xml: update type codes to match
dbus-protocol.h, using the ASCII byte values. Rename type NAMED to
CUSTOM. Add type OBJECT_PATH to the spec.
2003-10-17 Havoc Pennington <hp@redhat.com>
* bus/driver.c (create_unique_client_name): use "." as separator
in base service names instead of '-'
* dbus/dbus-string.c (_dbus_string_get_byte): allow getting nul
byte at the end of the string
* dbus/dbus-internals.h (_DBUS_LIKELY, _DBUS_UNLIKELY): add
optimization macros since string validation seems to be a slow
point.
* doc/dbus-specification.xml: restrict valid
service/interface/member/error names. Add test suite code for the
name validation.
* dbus/dbus-string.c: limit service/interface/member/error names
to [0-9][A-Z][a-z]_
* dbus/dbus-connection.c (dbus_connection_dispatch): add missing
format arg to verbose spew
* glib/dbus-gproxy.c (dbus_gproxy_call_no_reply): if not out of
memory, return instead of g_error
* test/test-service.c (path_message_func): support emitting a
signal on request
* dbus/dbus-bus.c (init_connections_unlocked): only fill in
activation bus type if DBUS_BUS_ACTIVATION was set; default to
assuming the activation bus was the session bus so that services
started manually will still register.
(init_connections_unlocked): fix so that in OOM situation we get
the same semantics when retrying the function
* test/test-service.c (main): change to use path registration, to
test those codepaths; register with DBUS_BUS_ACTIVATION rather
than DBUS_BUS_SESSION
* glib/dbus-gtest-main.c: bracket with #ifdef DBUS_BUILD_TESTS
* Makefile.am (GCOV_DIRS): remove "test", we don't care about test
coverage of the tests
(coverage-report.txt): don't move the .da and .bbg files around
* bus/connection.c (bus_pending_reply_expired): either cancel or
execute, not both
(bus_connections_check_reply): use unlink, not remove_link, as we
don't want to free the link; fixes double free mess
* dbus/dbus-pending-call.c (dbus_pending_call_block): fix in case
where no reply was received
* dbus/dbus-connection.c (_dbus_pending_call_complete_and_unlock):
fix a refcount leak
* bus/signals.c (match_rule_matches): add special cases for the
bus driver, so you can match on sender/destination for it.
* dbus/dbus-sysdeps.c (_dbus_abort): print backtrace if
DBUS_PRINT_BACKTRACE is set
* dbus/dbus-internals.c: add pid to assertion failure messages
* dbus/dbus-connection.c: add message type code to the debug spew
* glib/dbus-gproxy.c (gproxy_get_match_rule): match rules want
sender=foo not service=foo
* dbus/dbus-bus.c (dbus_bus_get): if the activation bus is the
session bus but DBUS_SESSION_BUS_ADDRESS isn't set, use
DBUS_ACTIVATION_ADDRESS instead
* bus/activation.c: set DBUS_SESSION_BUS_ADDRESS,
DBUS_SYSTEM_BUS_ADDRESS if appropriate
* bus/bus.c (bus_context_new): handle OOM copying bus type into
context struct
* dbus/dbus-message.c (dbus_message_iter_get_object_path): new function
(dbus_message_iter_get_object_path_array): new function (half
finished, disabled for the moment)
* glib/dbus-gproxy.c (dbus_gproxy_end_call): properly handle
DBUS_MESSAGE_TYPE_ERROR
* tools/dbus-launch.c (babysit): support DBUS_DEBUG_OUTPUT to
avoid redirecting stderr to /dev/null
(babysit): close stdin if not doing the "exit_with_session" thing
* dbus/dbus-sysdeps.c (_dbus_become_daemon): delete some leftover
debug code; change DBUS_DEBUG_OUTPUT to only enable stderr, not
stdout/stdin, so things don't get confused
* bus/system.conf.in: fix to allow replies, I modified .conf
instead of .conf.in again.
* python/dbus_bindings.pyx.in (MessageIter.get): fixed typo in
argtype to arg_type when raising unknown arg type exception.
Changed type list to reflect the changes in dbus-protocol.h so
the bindings actually work.
* test/decode-gcov.c: support gcc 3.3 also, though gcc 3.3 seems
to have a bug keeping it from outputting the .da files sometimes
(string_get_string): don't append garbage nul bytes to the string.
* bus/bus.c (bus_context_check_security_policy): revamp this to
work more sanely with new policy-based requested reply setup
* bus/connection.c (bus_transaction_send_from_driver): set bus
driver messages as no reply
* bus/policy.c (bus_client_policy_check_can_receive): handle a
requested_reply attribute on allow/deny rules
* bus/system.conf: add <allow requested_reply="true"/>
* bus/driver.c (bus_driver_handle_message): fix check for replies
sent to the bus driver, which was backward. How did this ever work
at all though? I think I'm missing something.
* dbus/dbus-message.c (decode_header_data): require error and
method return messages to have a reply serial field to be valid
(_dbus_message_loader_queue_messages): break up this function;
validate that reply serial and plain serial are nonzero;
clean up the OOM/error handling.
(get_uint_field): don't return -1 from this
(dbus_message_create_header): fix signed/unsigned bug
* bus/connection.c (bus_connections_expect_reply): save serial of
the incoming message, not reply serial
* bus/connection.c: implement pending reply tracking using
BusExpireList
* bus/bus.c (bus_context_check_security_policy): verify that a
reply is pending in order to allow a reply to be sent. Deny
messages of unknown type.
* bus/dbus-daemon-1.1.in: update to mention new resource limits
* bus/bus.c (bus_context_get_max_replies_per_connection): new
(bus_context_get_reply_timeout): new
Added test code that 1) starts an actual bus daemon and 2) uses
DBusGProxy; fixed bugs that were revealed by the test. Lots
more testing possible, but this is the basic framework.
* glib/dbus-gproxy.c (dbus_gproxy_manager_unregister): remove
empty proxy lists from the proxy list hash
* dbus/dbus-message.c (dbus_message_iter_get_args_valist): add a
couple of return_if_fail checks
* dbus/dbus-pending-call.c (_dbus_pending_call_new): use dbus_new0
to allocate, so everything is cleared to NULL as it should be.
* glib/dbus-gmain.c (dbus_connection_setup_with_g_main): pass
source as data to dbus_connection_set_timeout_functions() as the
timeout functions expected
* test/glib/run-test.sh: add a little script to start up a message
bus and run tests using it
* tools/dbus-launch.1: updates
* tools/dbus-launch.c (main): add --config-file option
* tools/dbus-launch.c (main): remove confusing else if (runprog)
that could never be reached.
* dbus/dbus-message.c (dbus_message_new_method_return)
(dbus_message_new_error, dbus_message_new_signal): set the
no-reply-expected flag on all these. Redundant, but may
as well be consistent.
* test/decode-gcov.c (function_solve_graph): make broken block
graph a nonfatal error since it seems to be broken. Need to debug
this.
* dbus/dbus-marshal.c (_dbus_type_is_valid): new function since we
can't just check type > INVALID < LAST anymore
* dbus/dbus-message.c (dbus_message_get_signature): new function
(dbus_message_has_signature): new function
(struct DBusMessage): add signature field (right now it isn't sent
over the wire, just generated on the fly)
(dbus_message_copy): copy the signature, and init strings to
proper length to avoid some reallocs
(dbus_message_iter_init_array_iterator): return void, since it
can't fail
(dbus_message_iter_init_dict_iterator): return void since it can't fail
(_dbus_message_loader_queue_messages): add silly temporary hack to
fill in message->signature on load
* dbus/dbus-protocol.h: change DBUS_TYPE_* values to be ASCII
characters, so they are relatively human-readable.
* dbus/dbus-message.c (_dbus_message_test): add more test
coverage, but #if 0 for now since they uncover a bug
not fixed yet; I think in re_align_field_recurse()
(re_align_field_recurse): add FIXME about broken assertion
* dbus/dbus-sysdeps.c (_dbus_sysdeps_test): add more test coverage
* bus/connection.c: share a couple code bits with expirelist.c
* bus/expirelist.h, bus/expirelist.c: implement a generic
expire-items-after-N-seconds facility, was going to share between
expiring connections and replies, decided not to use for expiring
connections for now.
* bus/connection.c: add tracking of expected replies
* COPYING: include AFL 2.0 (still need to change all the file headers)
* configure.in: define DBUS_HAVE_GCC33_GCOV if we have
gcc 3.3. Not that we do anything about it yet.
* bus/signals.c (bus_match_rule_parse): impose max length on the
match rule text
* dbus/dbus-protocol.h: add DBUS_MAXIMUM_MATCH_RULE_LENGTH
Make matching rules theoretically work (add parser).
* bus/bus.c (bus_context_check_security_policy): fix up to handle
the case where destination is explicitly specified as bus driver
and someone else is eavesdropping.
* bus/policy.c (bus_client_policy_check_can_receive): fix up
definition of eavesdropping and assertion
* tools/dbus-send.c (main): use dbus_message_type_from_string
* bus/signals.c (bus_match_rule_parse): implement
* dbus/dbus-message.c (dbus_message_type_from_string): new
* dbus/dbus-errors.h (DBUS_ERROR_MATCH_RULE_INVALID): add
