* dbus/dbus-message-builder.c (_dbus_message_data_load): append
random signature when using REQUIRED_FIELDS (this hack won't work
in the long term)
* dbus/dbus-message.c: change the signature to be a header field,
instead of message->signature special-case string. Incremental
step forward. Then we can fix up code to send the signature in the
message, then fix up code to validate said signature, then fix up
code to not put the typecodes inline, etc.
(load_one_message): don't make up the signature after the fact
(decode_header_data): require signature field for the known
message types
* dbus/dbus-marshal.c (_dbus_marshal_string_len): new
* dbus/dbus-protocol.h: add DBUS_HEADER_FIELD_SIGNATURE
hmm, make check is currently not passing.
* doc/dbus-specification.xml: add requirement that custom type
names follow the same rules as interface names.
* dbus/dbus-protocol.h: change some of the byte codes, to avoid
duplication and allow 'c' to be 'custom'; dict is now 'm' for
'map'
* doc/dbus-specification.xml: update type codes to match
dbus-protocol.h, using the ASCII byte values. Rename type NAMED to
CUSTOM. Add type OBJECT_PATH to the spec.
2003-10-17 Havoc Pennington <hp@redhat.com>
* bus/driver.c (create_unique_client_name): use "." as separator
in base service names instead of '-'
* dbus/dbus-string.c (_dbus_string_get_byte): allow getting nul
byte at the end of the string
* dbus/dbus-internals.h (_DBUS_LIKELY, _DBUS_UNLIKELY): add
optimization macros since string validation seems to be a slow
point.
* doc/dbus-specification.xml: restrict valid
service/interface/member/error names. Add test suite code for the
name validation.
* dbus/dbus-string.c: limit service/interface/member/error names
to [0-9][A-Z][a-z]_
* dbus/dbus-connection.c (dbus_connection_dispatch): add missing
format arg to verbose spew
* glib/dbus-gproxy.c (dbus_gproxy_call_no_reply): if not out of
memory, return instead of g_error
* test/test-service.c (path_message_func): support emitting a
signal on request
* dbus/dbus-bus.c (init_connections_unlocked): only fill in
activation bus type if DBUS_BUS_ACTIVATION was set; default to
assuming the activation bus was the session bus so that services
started manually will still register.
(init_connections_unlocked): fix so that in OOM situation we get
the same semantics when retrying the function
* test/test-service.c (main): change to use path registration, to
test those codepaths; register with DBUS_BUS_ACTIVATION rather
than DBUS_BUS_SESSION
* doc/dbus-specification.sgml: don't require header fields
to be 4-byte aligned and specify that fields should be
distinguished from padding by the fact that zero is not
a valid field name.
* doc/TODO: remove re-alignment item and add item to doc
the OBJECT_PATH type.
* dbus/dbus-message.c:
(HeaderField): rename the original member to value_offset
and introduce a name_offset member to keep track of where
the field actually begins.
(adjust_field_offsets): remove.
(append_int_field), (append_uint_field),
(append_string_field): don't align the start of the header
field to a 4-byte boundary.
(get_next_field): impl finding the next marhsalled field
after a given field.
(re_align_field_recurse): impl re-aligning a number of
already marshalled fields.
(delete_field): impl deleting a field of any type and
re-aligning any following fields.
(delete_int_or_uint_field), (delete_string_field): remove.
(set_int_field), (set_uint_field): no need to re-check
that we have the correct type for the field.
(set_string_field): ditto and impl re-aligning any
following fields.
(decode_header_data): update to take into account that
the fields aren't 4-byte aligned any more and the new
way to distinguish padding from header fields. Also,
don't exit when there is too much header padding.
(process_test_subdir): print the directory.
(_dbus_message_test): add test to make sure a following
field is re-aligned correctly after field deletion.
* dbus/dbus-string.[ch]:
(_dbus_string_insert_bytes): rename from insert_byte and
allow the insert of multiple bytes.
(_dbus_string_test): test inserting multiple bytes.
* dbus/dbus-marshal.c: (_dbus_marshal_set_string): add
warning note to docs about having to re-align any
marshalled values following the string.
* dbus/dbus-message-builder.c:
(append_string_field), (_dbus_message_data_load):
don't align the header field.
* dbus/dbus-auth.c: (process_test_subdir): print the
directory.
* test/break-loader.c: (randomly_add_one_byte): upd. for
insert_byte change.
* test/data/invalid-messages/bad-header-field-alignment.message:
new test case.
* test/data/valid-messages/unknown-header-field.message: shove
a dict in the unknown field.
* doc/dbus-specification.sgml: Change the header field name
to be an enum and update the rest of the spec to reference
the fields using the conventinal name.
* dbus/dbus-protocol.h: update to reflect the spec.
* doc/TODO: add item to remove the 4 byte alignment requirement.
* dbus/dbus-message.c: Remove the code to generalise the
header/body length and serial number header fields as named
header fields so we can reference field names using the
protocol values.
(append_int_field), (append_uint_field), (append_string_field):
Append the field name as a byte rather than four chars.
(delete_int_or_uint_field), (delete_string_field): reflect the
fact that the field name and typecode now occupy 4 bytes instead
of 8.
(decode_string_field), (decode_header_data): update to reflect
protocol changes and move the field specific encoding from
decode_string_field() back into decode_header_data().
* dbus/dbus-internals.[ch]: (_dbus_header_field_to_string):
Add utility to aid debugging.
* dbus/dbus-message-builder.c:
(append_string_field), (_dbus_message_data_load): Update to
reflect protocol changes; Change the FIELD_NAME directive
to HEADER_FIELD and allow it to take the field's conventional
name rather than the actual value.
* test/data/*/*.message: Update to use HEADER_FIELD instead
of FIELD_NAME; Always align the header on an 8 byte boundary
*before* updating the header length.
* test/data/valid-config-files/system.d/test.conf: change to
root for the user so warnings don't get printed
* dbus/dbus-message.c: add dbus_message_get_path,
dbus_message_set_path
* dbus/dbus-object-tree.c (do_test_dispatch): add test of
dispatching to a path
* dbus/dbus-string.c (_dbus_string_validate_path): add
* dbus/dbus-marshal.c (_dbus_demarshal_object_path): implement
(_dbus_marshal_object_path): implement
* dbus/dbus-protocol.h (DBUS_HEADER_FIELD_PATH): new header field
to contain the path to the target object
(DBUS_HEADER_FIELD_SENDER_SERVICE): rename
DBUS_HEADER_FIELD_SENDER to explicitly say it's the sender service
* dbus/dbus-hash.c (_dbus_hash_table_insert_two_strings): fix
* dbus/dbus-message.c (_dbus_message_loader_queue_messages): fix
dumb bug created earlier (wrong order of args to
decode_header_data())
* tools/dbus-send.c: port
* tools/dbus-print-message.c (print_message): port
* test/data/*messages: port all messages over
* dbus/dbus-message-builder.c: support including
message type
* bus/driver.c: port over
* bus/dispatch.c: port over to new stuff
* dbus/dbus-connection.c (_dbus_connection_new_for_transport):
rename disconnect signal to "Disconnected"
* test/data/valid-messages/opposite-endian.message: fix test
to use proper type for rply field
* test/data/invalid-messages: add tests for below validation
* dbus/dbus-message.c (decode_header_data): validate field types,
and validate that named fields are valid names
(decode_name_field): consider messages in the
org.freedesktop.Local. namespace to be invalid.
* dbus/dbus-string.c (_dbus_string_validate_name): new
* dbus/dbus-marshal.[ch]:
Add array_type_pos argument to _dbus_marshal_validate_arg.
Let you pass a NULL end_pos to _dbus_marshal_validate_type.
* dbus/dbus-message.[ch]:
Multi-dimensional arrays have full type specification in the
outermost array. Iter code re-arranged to handle this.
Added some more iter tests.
* doc/dbus-specification.sgml:
Add me to authors.
Remove old FIXME.
Update new array encoding description.
Correct DBUS_SERVICE_FLAGS_REPLACE_EXISTING description.
* test/data/invalid-messages/array-with-mixed-types.message:
* test/data/valid-messages/array-of-array-of-uint32.message:
Change to the new array format.
* test/data/invalid-messages/too-short-dict.message:
Fix bug in test.
* test/data/valid-messages/recursive-types.message:
Fix up and extend test.
* test/data/invalid-messages/array-with-mixed-types.message:
regression test that fails for the moment
* dbus/dbus-test.c (dbus_internal_do_not_use_run_tests): reorder
tests for convenience
* dbus/dbus-marshal.c (_dbus_marshal_validate_arg): don't allow
array of nil, it broke things.
* test/data/invalid-messages/array-of-nil.message: regression test
* test/data/valid-messages/array-of-array-of-uint32.message:
happened to write this so added it to suite
Implemented recursive types, named types and new-style iters
* bus/driver.c:
* glib/test-thread-client.c: (thread_func):
* glib/test-thread-server.c: (handle_test_message):
* test/test-service.c: (handle_echo):
Update to new api
* dbus/Makefile.am:
* dbus/dbus-dict.c:
* dbus/dbus-dict.h:
* dbus/dbus.h
Remove DBusDict
* dbus/dbus-internals.c: (_dbus_type_to_string):
Update for new types.
* dbus/dbus-marshal.[ch]:
Implement recursive types and the new marshalling format.
Remove hardcoded dict marshalling.
Marshal named types.
* dbus/dbus-message-builder.c:
Add BYTE_ARRAY.
Remove references to old types
* dbus/dbus-message.[ch]:
New non-refcounted iter API that supports recursive iters.
Use iters for appending, including support for recursive
iters.
Add byte and named type support.
Update everything to new marshalling formats.
Add tests for new API.
* dbus/dbus-protocol.h:
Remove old array types.
Add types: BYTE, ARRAY, DICT, NAMED
* dbus/dbus-string.c:
* dbus/dbus-sysdeps.c:
Make parse_double locale safe.
* dbus/dbus-test-main.c:
Call setlocale.
* dbus/dbus-test.c:
Kill dict test
* doc/dbus-specification.sgml:
Update spec
* test/data/incomplete-messages/missing-body.message:
* test/data/invalid-messages/bad-boolean.message:
* test/data/invalid-messages/bad-boolean-array.message:
* test/data/invalid-messages/boolean-array-length-too-long.message-raw:
* test/data/invalid-messages/boolean-has-no-value.message-raw:
* test/data/invalid-messages/too-short-dict.message:
* test/data/valid-messages/dict-simple.message:
* test/data/valid-messages/dict.message:
* test/data/valid-messages/emptiness.message:
* test/data/valid-messages/lots-of-arguments.message:
* test/data/valid-messages/no-padding.message:
* test/data/valid-messages/recursive-types.message:
Add missing NAME fields
Fix up dicts & arrays
* test/data/invalid-messages/dict-with-nil-value.message:
Removed, this is not invalid anymore.
* test/data/valid-messages/recursive-types.message:
Add new test for deeply recursive types.
* dbus/dbus-connection.c:
(dbus_connection_send_with_reply_and_block):
Decrease connection->n_incoming when removing an entry
from the list.
* dbus/dbus-dict.c: (dbus_dict_entry_free),
(dbus_dict_set_boolean_array), (dbus_dict_set_int32_array),
(dbus_dict_set_uint32_array), (dbus_dict_set_double_array),
(dbus_dict_set_byte_array), (dbus_dict_set_string_array),
(dbus_dict_get_boolean_array), (dbus_dict_get_double_array),
(dbus_dict_get_byte_array):
Handle NULL arrays and strings. Also add support for byte arrays.
* dbus/dbus-marshal.c: (_dbus_marshal_byte_array),
(_dbus_marshal_dict), (_dbus_demarshal_byte_array),
(_dbus_demarshal_int32_array), (_dbus_demarshal_uint32_array),
(_dbus_demarshal_double_array), (_dbus_demarshal_string_array),
(_dbus_demarshal_dict), (demarshal_and_validate_len),
(_dbus_marshal_validate_arg), (_dbus_marshal_test):
* dbus/dbus-marshal.h:
Add support for marshalling and demarshalling empty arrays and strings.
* dbus/dbus-message.c: (dbus_message_append_args_valist),
(dbus_message_append_string_array),
(dbus_message_iter_get_boolean),
(dbus_message_iter_get_boolean_array),
(dbus_message_iter_get_int32_array),
(dbus_message_iter_get_uint32_array),
(dbus_message_iter_get_double_array),
(dbus_message_iter_get_byte_array),
(dbus_message_iter_get_string_array), (dbus_message_iter_get_dict),
(check_message_handling):
Add support for getting empty arrays and dicts.
* dbus/dbus-string.c: (_dbus_string_validate_utf8):
Don't do any validation at all for now, that's better than just checking
for ASCII.
* test/data/valid-messages/emptiness.message:
New test message with lots of empty arrays.
Mega-patch that gets the message bus daemon initially handling
out-of-memory. Work still needed. Also lots of random
moving stuff to DBusError instead of ResultCode.
* dbus/dbus-list.c (_dbus_list_length_is_one): new function
* dbus/dbus-connection.c
(dbus_connection_send_with_reply_and_block): use DBusError
* dbus/dbus-bus.c: adapt to API changes, make it use DBusError not
DBusResultCode
* dbus/dbus-connection.c (dbus_connection_send): drop the result
code here, as the only failure possible is OOM.
* bus/connection.c (bus_connection_disconnect):
rename bus_connection_disconnected as it's a notification only
* bus/driver.c (bus_driver_handle_acquire_service): don't free
"name" on get_args failure, should be done by get_args;
don't disconnect client for bad args, just return an error.
(bus_driver_handle_service_exists): ditto
* bus/services.c (bus_services_list): NULL-terminate returned array
* bus/driver.c (bus_driver_send_service_lost)
(bus_driver_send_service_acquired): send messages from driver to a
specific client to the client's unique name, not to the broadcast
service.
* dbus/dbus-message.c (decode_header_data): reject messages that
contain no name field
(_dbus_message_get_client_serial): rename to
dbus_message_get_serial and make public
(_dbus_message_set_serial): rename from set_client_serial
(_dbus_message_set_reply_serial): make public
(_dbus_message_get_reply_serial): make public
* bus/connection.c (bus_connection_foreach): allow stopping
iteration by returning FALSE from foreach function.
* dbus/dbus-connection.c (dbus_connection_send_preallocated)
(dbus_connection_free_preallocated_send)
(dbus_connection_preallocate_send): new API for sending a message
without possibility of malloc failure.
(dbus_connection_send_message): rename to just
dbus_connection_send (and same for whole function family)
* dbus/dbus-errors.c (dbus_error_free): make this reinit the error
* dbus/dbus-sysdeps.c (_dbus_exit): new function
* bus/activation.c: handle/return errors
* dbus/dbus-errors.h: add more DBUS_ERROR #define
* dbus/dbus-sysdeps.c (_dbus_directory_open) (_dbus_file_get_contents)
(_dbus_directory_get_next_file): use DBusError instead of DBusResultCode
(_dbus_result_from_errno): move to this file
* dbus/dbus-marshal.c:
(_dbus_marshal_set_string):
Take a length argument so we can marshal the correct string
length.
(_dbus_marshal_dict), (_dbus_demarshal_dict),
(_dbus_marshal_get_arg_end_pos), (_dbus_marshal_validate_arg),
(_dbus_marshal_test):
* dbus/dbus-marshal.h:
Add support for marshalling and demarshalling dicts.
* dbus/dbus-message-builder.c: (_dbus_message_data_load):
Add support for TYPE DICT.
* dbus/dbus-message.c: (set_string_field):
Adjust header padding.
(dbus_message_append_args_valist), (dbus_message_append_dict),
(dbus_message_get_args_valist), (dbus_message_iter_get_arg_type),
(dbus_message_iter_get_dict), (_dbus_message_loader_return_buffer),
(check_message_handling), (check_have_valid_message):
* dbus/dbus-message.h:
Add functions for setting and getting dicts.
* dbus/dbus-protocol.h:
Add DBUS_TYPE_DICT.
* dbus/dbus.h:
Add dbus-dict.h
* doc/dbus-specification.sgml:
Add information about how dicts are marshalled.
* test/data/invalid-messages/dict-with-nil-value.message:
* test/data/invalid-messages/too-short-dict.message:
* test/data/valid-messages/dict-simple.message:
* test/data/valid-messages/dict.message:
Add sample messages containing dicts.
* test/break-loader.c (randomly_set_extreme_ints): add test that
sets really huge and small integers
* dbus/dbus-marshal.c (_dbus_marshal_validate_arg): add check
that length of boolean array fits in the string, and that
string has room for boolean value in single-bool case.
* dbus/dbus-message-builder.c (_dbus_message_data_load): add
optional value to "ALIGN" command which is what to fill the
alignment with.
* test/data/valid-messages/no-padding.message: add regression
test for the message padding problem
* dbus/dbus-marshal.c: (_dbus_demarshal_string_array):
Make string arrays NULL-terminated.
* dbus/dbus-memory.c: (dbus_free_string_array):
* dbus/dbus-memory.h:
New function for freeing NULL-terminated string arrays.
* dbus/dbus-message-builder.c: (append_quoted_string),
(_dbus_message_data_load):
Add support for array types.
* dbus/dbus-message.c: (check_message_handling):
Add more types as test cases.
* dbus/dbus-sysdeps.c: (_dbus_string_parse_int),
(_dbus_string_parse_double):
Add the start offset to the end offset.
* test/data/valid-messages/lots-of-arguments.message:
New test message with lots of arguments.
* configure.in:
Add check for nonposix getpwnam_r
* dbus/dbus-mempool.c: (_dbus_mem_pool_new):
Align the pool element size to a sizeof (void *) boundary.
* dbus/dbus-sysdeps.c: (_dbus_setenv), (_dbus_connect_unix_socket),
(_dbus_listen_unix_socket), (_dbus_credentials_from_username):
General Solaris fixes.
* test/data/valid-messages/simplest-manual.message:
Explicitly state that we want little-endian packing.
* dbus/dbus-connection.c (dbus_connection_set_change_sigpipe):
allow people to avoid setting SIGPIPE to SIG_IGN
(_dbus_connection_new_for_transport): disable SIGPIPE unless
we've been asked not to
* dbus/dbus-address.c: (dbus_address_entry_free):
Free key and value lists.
* dbus/dbus-internals.c: (_dbus_type_to_string):
Add the types we didn't have.
* dbus/dbus-marshal.c: (_dbus_marshal_get_arg_end_pos),
(_dbus_marshal_validate_arg):
Add NIL types.
* dbus/dbus-message.c: (dbus_message_set_sender):
Remove todo about being able to set sender to NULL.
(dbus_message_set_is_error_reply),
(dbus_message_get_is_error_reply):
* dbus/dbus-message.h:
New functions.
* dbus/dbus-protocol.h:
Add error reply flag.
* test/data/valid-messages/opposite-endian.message:
Add NIL type to test.
* dbus/dbus-message.c: use message->byte_order instead of
DBUS_COMPILER_BYTE_ORDER throughout.
(dbus_message_create_header): pad header to align the
start of the body of the message to 8-byte boundary
* dbus/dbus-marshal.h: make all the demarshalers take const
DBusString arguments.
* dbus/dbus-message.c (_dbus_message_loader_return_buffer):
validate message args here, so we don't have to do slow validation
later, and so we catch bad messages as they are incoming. Also add
better checks on header_len and body_len. Also fill in
message->byte_order
* dbus/dbus-string.c (_dbus_string_validate_utf8): new (not
implemented properly)
(_dbus_string_validate_nul): new function to check all-nul
* dbus/dbus-marshal.c (_dbus_marshal_get_field_end_pos): rename
get_arg_end_pos and remove all validation
(_dbus_marshal_validate_arg): actually do validation here.
* dbus/dbus-mempool.c (time_for_size): replace printf with
_dbus_verbose
* dbus/dbus-message-builder.c (_dbus_message_data_load): allow
empty lines; fix the SAVE_LENGTH stuff to be
START_LENGTH/END_LENGTH so it actually works; couple other
bugfixes
* test/Makefile.am (dist-hook): add dist-hook for .message files
* dbus/dbus-string.c (DBUS_STRING_COPY_PREAMBLE): source of a copy
can be constant or locked.
(_dbus_string_free): allow freeing a const string as
documented/intended
* dbus/dbus-sysdeps.c (_dbus_concat_dir_and_file): utility
* dbus/dbus-test-main.c (main): take an argument which is the
directory containing test data
* dbus/dbus-message.c (_dbus_message_test): pass a test_data_dir
argument to this and load all the messages in test/data/
checking that they can be loaded or not loaded as appropriate.
* dbus/dbus-message-builder.c: implement, completely untested.
* test/data/*: add data to be used in testing.
".message" files are our simple loadable text format.
".message-raw" will be binary dumps of messages.
* dbus/dbus-string.c (_dbus_string_starts_with_c_str): new
